Category

Sport and Outdoor
Showing results for "government gear"
Results 1 - 40 of 1500+

Redding Trim Die 45-70...

$42.49
MidwayUSA Redding Trim Die 45-70 Government
+ $4.99 shipping
/redding-trim-die-4570/Hgg_XCyviB9BrwAiyCREdQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Trim Dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. Other manufacturers use sizing die dimensions, forcing you to full length resize when trimming. For case forming and necking brass down from another caliber, Redding Trim Dies can be the perfect intermediate step before full length resizing. Technical InformationMateri al: Steel Die Type: Trim Die ONLY Accessories: Plastic storage case Notes: These trim dies allow you to file trim your cases without unnecessary resizing because they are made to chamber dimensions. This die requires an extended shellholder available from Redding. Form die must be purchased separately.
More

Lyman 3-Die Set 50-70...

$46.99
MidwayUSA Lyman 3-Die Set 50-70 Government
+ $7.59 shipping
/lyman-3die-set-5070/5CwFN8UgLL3vAwsvWXkjaw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Straight wall rifle cases require these three die sets consisting of a full length sizing die with decapping stem, a two step neck expanding (M) die and a bullet seating die. Ideal for loading cast bullets due to the inclusion of the neck expanding die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full Length Sizing Die (with one-piece decapping unit) 2-Step Neck Expander Die Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating. Shellholder not included.
More

Lyman 3-Die Set 45-70...

$46.99
MidwayUSA Lyman 3-Die Set 45-70 Government
+ $7.59 shipping
/lyman-3die-set-4570/EU7EA3WhljWknNhV348swg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Straight wall rifle cases require these three die sets consisting of a full length sizing die with decapping stem, a two step neck expanding (M) die and a bullet seating die. Ideal for loading cast bullets due to the inclusion of the neck expanding die. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full Length Sizing Die (with one-piece decapping unit) 2-Step Neck Expander Die Bullet Seating Die (with roll crimp) Accessories: Plastic Storage Case Notes: M-Die expands the case neck to just under bullet diameter for precise neck tension in first step. Second step flares case mouth to bullet diameter or slightly over for proper seating. Shellholder not included.
More

RCBS Trim Die 45-70 Government

$30.49
MidwayUSA RCBS Trim Die 45-70 Government
+ $4.99 shipping
/rcbs-trim-die-4570/f50GAqK4xMqQmwNZuUOFPA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Doubling as a case length gage, this die will quickly allow the reloader to see if the case is too long. If the case is too long, the case will stick out above the top of the die. To get the case to the correct size, file the case down until it's flush with the top of the die. The Trim Die has been case hardened, hand polish and heat treated to withstand a file bearing against the top surface without causing damage to the die. Shellholder sold separately. Technical InformationMateri al: Heat-Treated Steel Die Type Included: Trim Die Accessories: Plastic storage case Notes: Standard 7/8-14 thread. The trim die doubles as a visual case length gauge. Run a case into the trim die and if the case stck out above the top of the die, it's too long. File the case down until it is flush with the... Less
More

Redding 3-Die Set 45-70...

$66.49
MidwayUSA Redding 3-Die Set 45-70 Government
+ $8.39 shipping
/redding-3die-set-4570/D7ImeXN1gVft7g6nmckEYA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding 3-Die Sets are available for rifle and pistol cartridges. The pistol sets contain a full length sizing die, expander die, and bullet seating die. The rifle sets contain a full length sizing die, neck sizing die, and a bullet seating die. The full length sizing die features a decapping rod assembly with neck expander. The expander die includes a neck expanding plug and the seating die features a built-in crimping ring and seating plug. This combination is sure to produce consistent, reliable ammunition time and time again. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Full Length Sizer Die (with decapping unit) Expander Die for Pistol Sets and Neck Sizing Die for Rifle Sets Profile or Taper Crimp Seater Die (with built in... Less
More

Lee Quick Trim Die 45-70...

$9.99
MidwayUSA Lee Quick Trim Die 45-70 Government
+ $4.99 shipping
/lee-quick-trim-die-4570/OntfwMhNmuK6Yk4fb_RXIQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Lee Precision has been producing some of the highest quality reloading equipment for over 50 years. The Lee Deluxe Quick Trim Case Trimmer is the next step in the evolution of quick and accurate case trimming. Each die is made to hold brass cases securely while the cutter (sold separately) is turned ensuring that case mouths are cut square. Each die is threaded 7/8-14 to work in all reloader presses that accept standard reloading dies. Quick Trim Die Bodies are made for the most popular calibers on the market. Note: Requires the purchase of either the Lee Deluxe Quick Trim Case Trimmer 717013 or the Lee Value Trim Case Trimmer 982472 Technical Information: Dies Included: Quick Trim Die Die Size: Standard 7/8-14 threaded die Shellholder Required: Yes Shellholder Included: No Accessories... Less
More

Redding Sizer Die 45-70...

$40.49
MidwayUSA Redding Sizer Die 45-70 Government
+ $4.99 shipping
/redding-sizer-die-4570/QgSVhoVcYXlME3IyZO964g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Sizer Dies for straight wall cases fully resize the case walls and return the dimensions to SAAMI specifications. These dies also include a decapping assembly. Like all Redding dies, these dies are carefully machined out of high quality steel alloy and then hand polished for reliability and consistent performance. Technical InformationMateri al:Steel Die Type Included: Full Length Sizing Die (with decapping rod assembly) Accessories: Plastic Storage Box Notes: This die is used to squeeze the enlarged case back to its proper size and also deprimes it.
More

RCBS 3-Die Set 45-70...

$39.49
MidwayUSA RCBS 3-Die Set 45-70 Government
+ $7.59 shipping
/rcbs-3die-set-4570/RZVo1PQZAlTtX0bQttKA-g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

RCBS Expander Die 45-70...

$16.99
MidwayUSA RCBS Expander Die 45-70 Government
+ $4.99 shipping
/rcbs-expander-die-4570/reHxRLLiaA5NsinTS_TJFg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Slightly expands the case neck so that the bullet can be seated easily.Technical InformationMateri al: Steel Die Type: Expanding (or Belling) Die Accessories: Plastic storage case Notes: Straight wall cases require an extra die to expand the case mouth. The case mouth needs to be slightly flared to allow seating of the bullet. This die is usually founf as the second die in a set for straight walled cases. Bottleneck cases get expanded as the case is drawn over the expander ball while being removed from the resizing die.
More

Redding Profile Crimp Die...

$32.49
MidwayUSA Redding Profile Crimp Die 45-70 Government
+ $4.99 shipping
/redding-profile-crimp-die/w4dzh4ESliyTvcGl4M2zPA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Profile Crimp Dies were designed for those who want the best possible crimp. Profile crimp dies provide a tighter more uniform roll type crimp and require the bullet to be seated to the correct depth in a previous operation. These dies are not for cartridges that headspace on the case mouth. Technical InformationMateri al:Steel Die Type Included: Profile Crimp Die Notes: This die applies a roll crimp to rimmed pistol cases. THESE DIES ARE NOT FOR CARTRIDGES THAT HEAD-SPACE ON THE CASE MOUTH.
More

Lee Steel 3-Die Set 45-70...

$31.99
MidwayUSA Lee Steel 3-Die Set 45-70 Government
+ $7.59 shipping
/lee-steel-3die-set-4570/z_JW_ptYCu9UW27OIs9anA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This die set includes a Full Length Sizer Die (with decapping unit), Powder Through Expander Die and a Bullet Seater Die which features an adjustable taper to roll crimp. Also includes a shellholder, powder dipper and plastic container. Cases must be lubed prior to sizing.
More

Lee Classic Loader 45-70...

$28.99
MidwayUSA Lee Classic Loader 45-70 Government
+ $7.59 shipping
/lee-classic-loader-4570/zYWBiThrZiqcFNzeWtOMrw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Classic Reloader is the perfect kit for someone who would like to start reloading one caliber without breaking the bank. Contains everything you need to begin loading (except a hammer). Kit includes Sizing Die, Decapping Chamber, Bullet Seater and Priming Chamber, Priming Rod, Powder Measure, load data, plastic case and complete instructions. Technical InformationMateri al: Steel Loader Parts Plastic Powder Dipper Kit Includes: Bullet Seater and Priming Chamber Decapping Chamber Sizing Die Decapper Priming Rod Powder Measure Load Data Complete Instructions Notes: Complete Reloading System (requires hammer which is not included) Also Includes Plastic Storage Case
More

RCBS Legacy Series 3-Die Set...

$43.99
MidwayUSA RCBS Legacy Series 3-Die Set 50-70 Government
+ $7.59 shipping
/rcbs-legacy-series-3die/TNcAWak7dq-478n4Uufe3A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Legacy Series Dies are designed specifically for the Cowboy Action enthusiasts. Created for original or reproduction black powder rifle calibers. The 3-Die Set has a sizer die with decapping unit, expander die and a seater die with crimp. Does not feature a carbide sizing ring, cases must be lubed prior to sizing. Shellholder sold separately. Technical InformationMateri al: Polished and Heat Treated Steel Die Types Included: Sizer Die (with decapping unit) Expander Die (for expanding and belling case mouth) Seater Die (with roll crimp) Accessories: Plastic Storage Case Notes: Does not feature a carbide sizing ring (cases must be lubed prior to sizing) Lifetime Guarantee from RCBS Shellholder not included.
More

Hogue Le Government Rubber...

$169.96
eBay Hogue Le Government Rubber Laser Grip W/finger Grooves 45087
Free Shipping
/hogue-le-government/Qcj_ALICLfEa0eWe2XTRnA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Home About Us Shipping Returns Contact Hogue LE Government Rubber Laser Grip w/Finger Grooves 45087 Click to view full size Full Size Image Click to close full size. Hogue LE Government Rubber Laser Grip w/Finger Grooves 45087 Hogue Gear (45087)LE 1911 Government Model, Rubber Grip with Finger Grooves, Pink About Us Payment Shipping Condition Returns To be honest, we are not much different than our customers! We are a family owned and operated company, filled with hunters, police officers, mili
More

Lee Powder Through Expander...

$12.99
MidwayUSA Lee Powder Through Expander Die 45-70 Government
+ $4.99 shipping
/lee-powder-through/bZzsnxYirMZ5_EBrcMFJGA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Only Lee dies permit charging the case while expanding the case mouth. Every Lee 3-die Set includes the Powder Through Expanding Die at no extra cost. The Powder Funnel adapter can be replaced with a Lee Auto-Disk Powder Measure for fully automatic powder charging while the case mouth is being expanded. Shellholder sold separately. Technical InformationMateri al: SteelThreads: 7/8-14Die Type: Powder Through Expander DieAccessories: Plastic Storage CaseNotes: Allows you to charge the case while expanding the case mouth.
More

Lyman 310 Tool 4-Die Set...

$66.99
MidwayUSA Lyman 310 Tool 4-Die Set 45-70 Government (Large Handles Required)
+ $4.99 shipping
/lyman-310-tool-4die-set/oLxvnn56ZXaD6NUWDTYxqg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Invented more than 100 years ago, the 310 Tool was sold as standard equipment along with the classic Sharps and Winchester rifles of that era. This simple and compact reloading kit can go anywhere. Includes: neck sizing and decapping die, primer seating chamber, neck expanding die, bullet seating die and case head adapter. Handles are required to operate the tool - sold separately. Technical InformationMateri al: Steel Die Types Included: Neck Resizing and Decapping Unit Primer Seating Chamber Bullet Seating Die Neck Expanding Die Accessories: Comes with a Case Head Adapter (used as a shell holder) for the proper 310 Tool Handles (sold separately).
More

Lee Factory Crimp Die 45-70...

$11.49
MidwayUSA Lee Factory Crimp Die 45-70 Government, 450 Marlin
+ $4.99 shipping
/lee-factory-crimp-die/pMqsIopwWPC1xgbTCkuzGw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Factory Crimp Die crimps the bullet firmly in place. It features a collet that squeezes the case mouth into the crimping groove for a firm hold. It is nearly impossible to buckle the case as with regular roll crimp dies. Shellholder sold separately. Technical Information Material: Steel Fits: Reloading presses that accept standard 7/8-14 Threads Notes: This Factory Crimp Die will also work with the 450 Marlin This Factory Crimp Die does not adjust the crimp by the top of the die, the amount of crimp is adjusted by how much pressure is put on from the press ram Accessories: Plastic Storage Box
More

Hornady Custom Grade New...

$46.99
MidwayUSA Hornady Custom Grade New Dimension 3-Die Set 45-70 Government
+ $7.59 shipping
/hornady-custom-grade-new/BUmLNqiOjmZDA9Xw9LhWLA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension 3-Die Set is a great die set for the avid reloader. The 3-die set is designed for straight-walled cases. The set includes CGND Full Length Sizer Die, CGND Expander Die, and CGND Seater Die. The Full Length Sizer Die features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This is designed to eliminate spindle slippage and makes tightening the spindle lock a breeze when making adjustments. The CGND Seater Die is designed with a floating bullet seater alignment sleeve and seating stem that aligns the bullet with the case, to improve bullet seating and accuracy. Shellholder sold separately. Technical InformationMateri al: Steel Die Types Included: Full-length Sizing Die Adjustable Case Mouth Expander Die Bullet... Less
More

Redding Seater Die 45-70...

$42.49
MidwayUSA Redding Seater Die 45-70 Government
+ $4.99 shipping
/redding-seater-die-4570/CVDjXWVDWO6nZe3NqfHQag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Seating Die includes bullet guide, built-in crimping ring and the proper caliber seating plug. Like all Redding dies, this die is carefully machined out of high quality alloy and then hand polished for reliability and consistent performance. 7/8 x 14 tpi threads will fit most popular reloading presses. Made in the USA. Technical InformationMateri al: Steel Die Type Included: Bullet Seating Die Accessories: Plastic storage box Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die.
More

RCBS Cowboy 3-Die Set 45-70...

$50.99
MidwayUSA RCBS Cowboy 3-Die Set 45-70 Government
+ $7.59 shipping
/rcbs-cowboy-3die-set/EfzI1UbhAetJO8SOSlWzFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Built to slightly different dimensions than the regular RCBS dies to allow optimum sizing, expanding, seating and crimping needed to load great lead bullet ammo. Heat treated for a more authentic appearance. Handsome brass lock rings and period style packaging complement these premium dies. Shellholder sold separately. Technical InformationDie Types Included: Sizer Die(with Decapping Unit) Expander Die (For Expanding and Belling Case Mouth) Seater Die with Roll Crimp Notes: Not Carbide Shellholder Not Included Cases Must Be Lubed Before Sizing Seating Die Designed for Use with cast bullets only Built to slightly different dimensions than regular dies to allow optimum sizing, expanding, seating and crimping needed to load lead bullet ammo. Uses Shellholder #14
More

Redding Expander Die 45-70...

$27.79
MidwayUSA Redding Expander Die 45-70 Government
+ $4.99 shipping
/redding-expander-die/GxUZJXEpLO3gXOfGx3iKxg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Expander Dies flare the case mouth slightly to facilitate bullet seating. These dies are held to strict manufacturing tolerances at all stages and are heat treated to relieve stress and provide a lifetime of use. Made in the USA. Technical InformationMateri al: Steel Die Type: Expander Die Accessories: Plastic storage case Notes: Straight wall cases require an extra die to expand the case mouth.
More

Redding Neck Sizer Die 45-70...

$49.49
MidwayUSA Redding Neck Sizer Die 45-70 Government
+ $4.99 shipping
/redding-neck-sizer-die/H7S5bqNbZLGmtC57_xcIyQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Neck Sizer Dies only size the neck of your bottleneck cases to prolong brass life and improve accuracy. It is important to note that since these dies size only the neck and not the shoulder or body, fired cases should not be interchanged between rifles of the same caliber. Made in the USA. Technical InformationMateri al:Steel Die Type Included: Neck Sizer Die ONLY Accessories: Plastic storage case
More

RCBS Cowboy Expander Die...

$23.79
MidwayUSA RCBS Cowboy Expander Die 45-70 Government
+ $4.99 shipping
/rcbs-cowboy-expander-die/kPjaDAFLX9sQ9SkwTso2CA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Built to slightly different dimensions than the regular RCBS dies to allow optimum expanding needed to load great lead bullet ammo. Heat treated for a more authentic appearance. Handsome brass lock rings and period style packaging complement these premium dies. Shellholder sold separately. Technical InformationNotes: Not carbide Expander Die is used for expanding and belling the case mouth Cases must be lubed before sizing Built to slightly different dimensions than regular dies to allow optimum sizing and expanding needed to load lead bullet ammo.
More

Redding Profile Crimp Die...

$32.49
MidwayUSA Redding Profile Crimp Die 45-70 Government FTX
+ $4.99 shipping
/redding-profile-crimp-die/uda1WJFuVlijwewLV5zX2A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Profile Crimp Dies were designed for those who want the best possible crimp. Profile crimp dies provide a tighter more uniform roll type crimp and require the bullet to be seated to the correct depth in a previous operation. This die was specifically developed in response to the increased popularity of loading Hornady FTX bullets in the 45-70 cartridge. The FTX bullet requires the case to be trimmed down slightly shorter than SAAMI specifications which prevents standard reloading dies from properly crimping. The Redding 45-70 FTX die has a lowered crimping section allowing it to perfectly crimp cases loaded with FTX bullets. This die may also be used on standard length 45-70 cases as long as it is backed out slightly. Technical InformationMateri al: Steel Die Type Included:... Less
More

& F 10095 Government Issued...

$17.00
eBay & F 10095 Government Issued Style Mechanics Tool Bag With Brass Zipper Navy...
Free Shipping
/f-10095-government/RGNKEZUEbZnZL30P0e3Now==/info
eBay
IN_STOCK ( In stock )
Free Shipping
G F 10095 Government Issued Style Mechanics Tool bag with Brass zipper, Navy Blue Description This heavyweight canvas mechanic's tool bag from G F will keep you organized and ready at a moment's notice! The interior is spacious for larger tools, with 4 tool pouches on the sides to keep your other gear neat and orderly, the other side contains two larger pouches. The exterior has a large pocket on each side which closes with snap closures for paperwork, pens, or other accessories you might need.
More

L.E. Wilson Case Length Gage...

$15.49
MidwayUSA L.E. Wilson Case Length Gage 45-70 Government
+ $4.99 shipping
/le-wilson-case-length/MHMdDw4DNlGpnpAaBT73Gw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
L.E. Wilson has been making precision reloading tools for over 80 years. This steel case length gage allows reloaders to easily identify any case that exceeds the maximum allowable case length according to SAAMI specifications. Technical Information Material: Steel Features: Precision Machining Notes: Allows reloaders to easily identify cases that are beyond maximum length
More

Hornady Custom Grade New...

$21.49
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 45-70 Government, 450 Marlin
+ $4.99 shipping
/hornady-custom-grade-new/HuEQ_8E0N8y2zrSO5VBiCw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Lyman Black Powder Cartridge...

$23.99
MidwayUSA Lyman Black Powder Cartridge Taper Crimp Die 45-70 Government, 45-90 WCF, 45-100 Sharps
+ $4.99 shipping
/lyman-black-powder/yui-EqNYE73l49I_oAcdPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Blackpowder cartridges require compression for proper ignition. This requires firm neck tension to hold the bullet without damage. The Lyman Taper Crimp Die has a minimum taper that allows the reloader to apply the proper neck tension without damaging the bullet, which results in the best accuracy. Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Taper Crimp Die Notes: Applies the proper crimp to rifles cases without damaging the bullet. Works for the 45-100 Sharps, 45-70 Government, & 45-90 WCF.
More

L.E. Wilson Trimmer Case...

$11.29
MidwayUSA L.E. Wilson Trimmer Case Holder 45-70 Government for New, Full Length Sized Cases
+ $4.99 shipping
/le-wilson-trimmer-case/cato8piQIdV8ee7slloz3g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Trimmer Case Holder provides the ultimate accuracy and uniformity for trimming your cases. The unique design of the case holder supports the case body, much like a chamber of a firearm. The Case Holders are precisely manufactured for consistent results and repeatability. The case holders can also be used for primer pocket reaming, neck reaming, and deburring with the L.E. Wilson Uniform Deburring tool (sold separately). Case Holders listed for fired cases will work on fired cases only. Holders listed for new cases will work on new and resized cases only. Technical InformationMateri al: Steel Fits: L.E. Wilson Case Trimmer Use: For fired cases, or new and resized cases (see description) Notes: To use, simply place the case in the trimmer case holder, tap the case head on a... Less
More

RCBS Full Length Sizer Die...

$23.29
MidwayUSA RCBS Full Length Sizer Die 45-70 Government
+ $4.99 shipping
/rcbs-full-length-sizer/Cp009UtoYqLJAHfiJwm5Kw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These dies size the entire length of the case. Steel dies require the application of sizing lube to prevent damage to the case or it sticking in the die.Technical InformationMateri al: Steel Die Type Included: Sizer Die (With Expander- Decapping Unit) Accessories: Plastic storage case Notes: Resizes the full length of the case. NOT Carbide.
More

Redding Competition Seater...

$85.49
MidwayUSA Redding Competition Seater Die 45-70 Government
+ $7.59 shipping
/redding-competition/TJdS5kH9DgvXWGCXJ5xPjg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Redding Competition Seater Die has solved the concentricity problems inherent in other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to float on a column of air. The seating stem is precision ground to exactly match bullet diameter. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before bullet seating begins. The micrometer is calibrated in 0.001 increments for precise seating depth and is infinitely adjustable (without clicks). Also has a zero set feature that allows you to zero the... Less
More

Redding 3-Die Neck Sizer Set...

$66.49
MidwayUSA Redding 3-Die Neck Sizer Set 45-70 Government
+ $8.39 shipping
/redding-3die-neck-sizer/U0AxOHiafwLjPyeu4XbEIQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Redding 3-Die Neck Sizer set includes Neck Sizer Die with decapping/expande r unit and Bullet Seater Die with crimping ring and seater plug. They are machined from the finest quality alloy steel then heat treated in atmospherically controlled furnaces for super tight tolerances and a lifetime of use. Shellholder sold separately. Made in the USA. Technical InformationMateri al: Steel Die Types Included: Neck Sizer Die (with decapping / expander unit) Expander Die Seater Die (with built in crimping ring and seater plug) Accessories: Plastic Storage Case Spare Decapping Pin
More

RCBS Roll Crimp Seater Die...

$20.99
MidwayUSA RCBS Roll Crimp Seater Die 45-70 Government
+ $4.99 shipping
/rcbs-roll-crimp-seater/qttClFt6Fdp8H7kp1eXLqQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Roll crimp is designed for use with heavy recoiling revolver cartridges. To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case mouth. Technical InformationMateri al: Steel Die Type: Roll Crimp Seater Die Accessories: Plastic storage case Notes: A Bullet Seater is used to push (seat) the bullet down into the case to a specific depth and is found in the Seating die. As the seater pushes the bullet into the case, the shoulder of the die crimps the case against the bullet.
More

Lyman Neck Sizer Die 45-70...

$29.99
MidwayUSA Lyman Neck Sizer Die 45-70 Government, 45-90 WCF, 45-100 Sharps
+ $4.99 shipping
/lyman-neck-sizer-die/r3_WX2qBT7Aq9f0KkhnHWw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to work only the neck with a decapping stem and expander button. Technical InformationMateri al: Steel Die Type: Neck Sizing Accessories: Plastic storage case included. Notes: A Sizing Die is used to 'squeeze' the enlarged case back to its proper size and usually also to deprime it. For straight walled black powder cases. Will not overwork expensive brass.
More

Hornady .45-70 Government...

$49.99
Academy Sports and Outdoors Hornady .45-70 Government Reloading Dies 3-Pack
Free Shipping
/hornady-4570-government/3hlwmZAZ73vjNU-prpjxsw==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
Free Shipping
The Hornady .45-70 Government Reloading Dies 3-Pack feature a smooth finish and a Zip Spindle design.
More

Buyenlarge Government...

$162.99
Wayfair Buyenlarge Government perfume, fragrance Factory Vintage Advertisement 0-587-03318-5
Free Shipping
/buyenlarge-government/SYT2-L6wCSCWJ8jkRcZw3w==/info
Wayfair
IN_STOCK ( In stock )
Free Shipping
Buyenlarge 0-587-03318-5 Salesman, perfume, fragrance, Boxes, tsarist Features: -Title: Government perfume, fragrance Factory.-Theme: Tsarist Advertising.-Made in the USA.-Product Type: Vintage advertisement.-Sub ject: Figures.-Orientati on: Vertical.-Size: Large 33-40.-Distressed: No.-Number of Items Included: 1.-Country of Manufacture: United States. Dimensions: -Overall Height - Top to Bottom: 36.-Overall Width - Side to Side: 24.-Overall Depth - Front to Back: 1.5.-Overall Product Weight: 6.Warranty: -Manufacturer provides 120 days limited warranty.
More

Hogue Le Government Rubber...

$169.96
eBay Hogue Le Government Rubber Laser Grip W/finger Grooves 45083
Free Shipping
/hogue-le-government/gaUuFOVgSaTn8cD6E5aJDA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Home About Us Shipping Returns Contact Hogue LE Government Rubber Laser Grip w/Finger Grooves 45083 Click to view full size Full Size Image Click to close full size. Hogue LE Government Rubber Laser Grip w/Finger Grooves 45083 Hogue Gear (45083)LE Grip, 1911 Government Model Rubber Grip with Finger Grooves, Desert Tan About Us Payment Shipping Condition Returns To be honest, we are not much different than our customers! We are a family owned and operated company, filled with hunters, police off
More

AimShot 45 Long Colt, 45-70...

$9.99
MidwayUSA AimShot 45 Long Colt, 45-70 Government Arbor for 30 Carbine Diode Module
+ $4.99 shipping
/aimshot-45-long-colt/daEBvF_ZA6aZAoN6OgCvow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These caliber specific arbors accept the Aimshot Bore Sight 30 Carbine Laser Diode Module. Simply insert the module into the arbor and then insert the arbor into the chamber. A bright laser beam shines through the bore of the gun and is visible on the target, allowing for initial sighting in of optical sights. This system saves time and money that would otherwise be wasted getting the shots on paper. Technical Information: Aimshot Laser Bore Sight Arbor Material: Brass Notes: For use with Aimshot Laser Boresight 30 Carbine Diode Module. Slides over 30 Carbine diode module to allow for a perfect fit and exact centering to the firearm's bore.
More

Hornady Horady 45-70...

$57.99
Groupon Hornady Horady 45-70 Government-50 Caliber Unprimed Brass Box-50
Free Shipping
/hornady-horady-4570/FjBUAEYdOLx-K6Yd0_h-HA==/info
Groupon
IN_STOCK ( In stock )
Store not rated
Free Shipping
With Hornady brass you'll get more reloads, greater consistency, predictable performance with accuracy that commodity brass simply cannot deliver. Hornady builds cases with the same precision, attention to detail and focus on perfection that has made us a world-leader in bullets and ammunition. We measure for consistent walls concentricity and we run our cases through pressure calibration tests to ensure uniform case expansion. And, taking quality control to the extreme, each and every case is hand inspected. Thanks to this kind of manufacturing care, Hornady brass will ensure proper seating of the bullet, both in the case and in the chamber. It means consistent pressures, and ultimately yields optimal velocity and repeatable accuracy.
More

BLACKHAWK! Tactical Serpa...

$89.99
MidwayUSA BLACKHAWK! Tactical Serpa Thigh Holster Right Hand 1911 Government Polymer Coyote Tan
+ $8.39 shipping
/blackhawk-tactical-serpa/qUdQ0i5k6a31bDtVzOm1nw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The BlackHawk Tactical Serpa Holster 'Y' system reduces joint and hip stress by over 50% more than the standard drop point load. - Todd Jarrett. Used and trusted by the pros, this holster system allows for easy retrieval of your favorite side arm while allowing hours of comfort. The Y-shaped harness allows for easier movements than other holsters. Technical InformationNotes: Serpa system allows a rapid draw and locks securely upon reholstering with no straps or snaps. Thigh platform molds itself to the user's leg. Y-harness leg straps and articulating quick-release buckles. Also works with BlackHawk law enforcement duty gear belt pouches. When wearing holster, pants pockets are still accessible.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335