This is a BRAND NEW Goodman/Janitrol/ Amana 2 Stage Gas Furnace Air Pressure Switch. The Goodman/Janitrol # is B13701-32. Tridelta #s are FS6639-1227, FS6440-1230. The low fire switch is rated at .40" w/c and the high fire switch is rated at 3.10" w/c. Each switch has two wiring terminals and one hose port.

Induced Draft Furnace Blower, Voltage 115, 1.0 Amps, Height 7 In, Width 9 1/4 In, Depth 10 1/4 In, Designed For Use In High Efficiency Gas-fired Residential Furnaces, Replaces Goodman B1859000, Rheem 70-21496-01, 70-2496-03, 70-21496-83, 70-21501-03, 70-21504-03, Product Used As Direct Oem Replacement Only. Any Other Use Constitutes A Misapplication, Which Voids The Warranty And May Create Unsafe Conditions

Up for Sale is a Hot Surface Furnace Ignitor White Rodgers # 767A-373. This igniter is a replacement for Goodman part # B1401009, Intercity # 1009604 Norton # 271NM Robertshaw # 41-412. This Ignitor has a ceramic base with a special OEM metal mounting bracket. The wire leads measure 5" long including the plug 2 ceramic wire nuts are included. This part is well packaged in a box w/ plenty of foam around it when we ship this, we put it in another box to insure it's safe unbroken upon arrival. Che

YOU ARE BIDDING ON A NEW GOODMAN AMANA FURNACE CONTROL BOARD PCBBF112S 50A55-289 1165-310. THIS BOARD WILL COME AS PICTURED NEW IN THE ORIGINAL PACKAGING. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.

Up for sale is a control board for multiple furnace applications. part number 1012-83-9336a Thanks for looking and check out my other items!

Goodman/Janitrol 0131M00000PS Blower Motor. Motor is a GENUINE Goodman OEM replacement part. It is brand-new, in the box. 3/4 HP 208-230 Volt 1 PH 1075 RPM 3SP 4.06 Amp CCW Rotation Requires 15 MFD 370 VAC Capacitor (Included) KY residents add 6% sales tax.

Goodman B18099-13S H.S.I. board with wiring harness. Board fits GMT, GMNT, GMP, and GMPN model furnaces. Part is brand new in the box. Due to the possibility of improper installation or wiring, we cannot accept returns on parts. ALL SALES ARE FINAL .**KY residents must pay 6% sales tax.**

Up for Sale is a Hot Surface Ignition Furnace Ignitor Stock # IG1121, Manufactured by Starlite Igniters. This is New, & Unused. This igniter is a replacement for Goodman # B1401015, B140108S & Modine # 5H075032B. The Ignitor's ceramic base measures 15/16" wide & 1/2" thick. The wire leads measure 5-1/2" long, with connector. Metal Mounting Bracket attached holes measure 1-1/4" center to center, mounting screws included.

This is an GOODMAN/JANITROL/ AMANA Furnace Flame Sensor. This flame sensor fits MANY furnaces, includes Model #s that start with GMP, GMPN, GMPE, GPD, GSM, GSMS, and GMPH. The part number is B11726-06. The flame sensor on the right has been replaced by the one on the left. The one on the right is no longer in production.

New 3-Wire 1-Hose Amana/Goodman C64565-03 Gas Furnace Air Pressure Switch 9370VD-HS-0002 (-0.75"PF) Model: C64565-03 / 9370VD-HS-0002 Manufactured by: AMANA / GOODMAN

Goodman B1859000 Induced Furnace Blower Motor A079 Goodman B1859000 Induced Furnace Blower Motor A079 Specifications: Shaded Pole 1 Speed Sleeve Bearings RPM 3000 Volts 115 Amps 1.1 Frequency 60 Diameter 3.3 Rotation CCW Climate Doctors offers products that may require professional installation.

Goodman PCBBF112S H.S.I. furnace control board. Board fits GMS, GDS,and GKS model furnaces. Part is brand new in the box. **KY residents must pay 6% sales tax.**

Up for Sale is a Hot Surface Ignition Furnace Ignitor Stock # IG1121, Manufactured by Starlite Igniters. This is New, & Unused. This igniter is a replacement for Goodman & Janitrol # B1401015, B1401018S & Modine # 5H075032B. The Ignitor's ceramic base measures 15/16" wide & 1/2" thick. The wire leads measure 5-1/2" long, with connector. Mtal Mounting Bracket attached holes measure 1-3/8" center to center, mounting screws included.

Up for Sale is a Hot Surface Ignition Furnace Ignitor Stock # IG1121, Manufactured by Starlite Igniters. This is New, Unused. This igniter is a replacement for Goodman # B1401015, Modine # 5H075032B . The Ignitor's ceramic base measures 15/16" wide 1/2" thick. The wire leads measure 5-1/2" long,with connector. Mtal Mounting Bracket attached holes measure 1-3/8" center to center, mounting screws included. This part is well packaged in a box w/ plenty of foam around it when we ship this, we put i

GOODMAN MEMORY MODULE Mfg: GOODMAN Model #: 0130F00032 Alternate Model #: SCL #: 167946 Condition: NewOther MEMORY MODULE FOR FURNACE MODEL # GMVC950704CXAA, WEIGHT:0.1OZ, DIMS:1"H X 15/16"W X 1/8"D Surplus City Liquidators

Robertshaw's 41-400 Series Norton Hot Surface Ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment. The 41-400 Series Hot Surface Ignitors are made of high-purity recrystallized silicon carbide (CrystarTM) which combines physical and thermal strength with stable electrical properties. The 41-400 Series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection. All 41-400... Less

GOODMAN 17"W COMBUSTIBLE FLOOR BASE Mfg: GOODMAN Model #: SBM-17 Alternate Model #: SCL #: 99186 Condition: NewOther 17 WIDE COMBUSTIBLE FLOOR BASE, FOR GMP/GMPN GOODMAN FURNACES, GALVANIZED STEEL, DIMS: 2-1/2 H 18-1/4 W x 27-3/4 D, WEIGHT: 6 LBS 6 OZ. Large Image Surplus City Liquidators Worlds Largest Distributor of Excess Air Conditioning, Heating and Refrigeration Items Lebanon IN 46052 Phone: 765-482-7000 (M-F 8am to 5pm Eastern)Fax: 765-482-8740 If You Do Not See a Component or Item tha

Goodman Janitrol B18099-04 Furnace Circuit Board. Guaranteed To Work.

Goodman 5 tube burner kit. Measures 24" long x 16" wide. For use in the following units: PG042125-1A & PG048125-1B.

Up for Sale is a Furnace Ignitor Stock # IG0001. This is New, & Unused. This Mini Igniter Conversion Kit is a replacement for Goodman B1401015S, B1401018S, 0230K00000S, 0130F00010. Includes Mini Igniter, Flat Mounting Plate, Screw, Instruction Sheet and Adapter Harness. Manufactured using Silicone Nitride.

Up for Sale is a ICM Control Gas Ignition Control Module Part Number ICM286.This item is Brand New. Unused and in the Package.This board is a replacement for the following number: Goodman: PCBBF112S Goodman: B1809926S Goodman: 0130F00005S The ICM286 Furnace Control Board is a form, fit and functional replacement for Goodman's popular PCBBF112S or B1809926S control board. It features micro-processor based precision with a status LED for testing and easy troubleshooting. Features: Controls the gas

GOODMAN PROPANE CONVERSION KIT Mfg: GOODMAN Model #: LPX00 Alternate Model #: GPCUCELP SCL #: 54567 Condition: NewOther CONVERSION KIT TO CONVERT FROM NATURAL TO PROPANE GAS, GAS FURNACES WITH ELECTRONIC IGNITION, INCLUDES: INSTALLATION INSTRUCTIONS, CONVERSION LABEL, REGULATOR SPRING KIT #78244, PILOT ORIFICE LP, LOCK-OUT MODULE #L015, MAIN BURNER ORIFICE #55, WHITE WIRE, PURPLE WIRE, BLACK WIRE AND GREEN WIRE, INPUT VOLTAGE 24VAC MAX TOTAL CURRENT NOT TO EXCEED 1.5A, WEIGHT: 1-LB 6-OZ

Up for Sale is a ICM Control Gas Ignition Control Module Part Number ICM287.This item is Brand New. Unused and in the Package.This board is a replacement for the following number: Goodman: B18099-04 The ICM287 control is microprocessor based using software to determine the sequence of operation and timing. The control also monitors the status of the gas valve before energizing the inducer and heat and cool blowers. Features: Low cost form, fit and functional replacement board for Goodman B18099

Brand new furnace igniter replaces Goodman B1401018S.

This foam furnace door filter is 16" wide x 26" long x 1/4" thick. It fits CMF & CMH Miller furnace doors, and mounts in by using built-in retainers. It is long-lasting and washable.

Up for Sale is a Hot Surface Ignition Furnace Ignitor Stock # AFN5422 This is a Silicone Nitride Ignitor...it is strong! This igniter replaces Goodman # B140105, B1401009, Robertshaw #'s 41-412 & 41-414, Norton # 271NW With shock mount bracket & 90 degree bracket This igniter will fit into the existing Stainless Steel mounting brackets The Silicon Nitride Igniter provides exceptional improvement in durability by virtually eliminating the concern of fragility. Perhaps the greatest feature of this revolutionary innovation is operation at line voltage (115VAC) thus eliminating the need for an additional controller.

Vented Natural Gas Floor Furnace, Btuh Input 62000, Floor Opening 24 1/2 X 38 1/2 Inches, Floor To Center Of Vent 22 Inches, Gas Pipe Size @ Furnace 1/2 Inch, Grille Size 26 X 40 Inches, Vent Pipe Opening 5 Inches, Length 38 Inches, Width 24 Inches, Depth 29 7/8 Inches