Showing results for "general electric current tap"
Results 1 - 40 of 1500+

GENERAL ELECTRIC CVJ606W...

$117.28
Zoro GENERAL ELECTRIC CVJ606W Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric-cvj606w/B1zQxB8kH-Mak1kSAC85nA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Screw On Enclosure Cover Type, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, Enclosure Cover Features Clear, IP Rating 6511, Color RAL7035, Finish Smooth, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

General Wire Electric Floor...

$1,780.00
Global Industrial General Wire Electric Floor Model Machine W/ Power Feed, 100'X3/4 Cable & Cutter Set, Ps-92-C
No Shipping Info
/general-wire-electric/59z8Lln5IFhhQVgsFWMhCw==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100'x3/4 Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2 cable (available separately), a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4, 5/8, and 1/2 cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4 or 5/8 cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. Getting to and from the job is easier because the Speedrooter 92 has big ten-inch wheels, V-belt stair climbers to get up and down stairs easier, and a loading wheel... Less
More

GENERAL ELECTRIC VJ606NHW...

$115.66
Zoro GENERAL ELECTRIC VJ606NHW Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric-vj606nhw/K7-T_ojQrlLk6FLXXwxo5Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
NonMetallic Enclosure, NEMA Rating 4X, Fiberglass Reinforced Polyester, Length 6.00 In, Width 6.00 In, Depth 4.21 In, Finish Gray, Opaque/Non Metallic Hinged Cover Type, Lid Hinge, Seamless Polyurethane Foam Gasket, VJ Series, Interior Panel G0353893, G2983303 or 2HRN1, Color Gray, Standards IEC 4391,IEC 529 Rated IP6611,EN50298, UL 508A Types 3, 3R, 4, 4X, 12 And 13
More

General Tools Reversible...

3 stores General Tools Reversible Ratchet Tap Wrenches -no. 0 to 1 4
T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 1/4, Machine Screw Tap...
More

GENERAL 166 T Handle Tap...

$14.59
Walmart.com GENERAL 166 T Handle Tap Wrench,Sliding,12 to 1/2 In
+ $5.00 shipping
/general-166-t-handle-tap/SjG2WK5acGgDlpBGiN77fA==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Sliding, Fractional Tap Capacity (In.) 0.5, Machine Screw Tap Capacity 12 to 14, Metric Tap Capacity 6 to 12mm, Body Length (In.) 3-3/4 Features Body Length (In.) : 3-3/4 Fractional Tap Capacity (In.) : 1/2 Item : T Handle Tap Wrench Type : Sliding Machine Screw Tap Capacity : 12 to 1/2 Number : 166 Metric Tap Capacity : 6 to 12mm
More

GENERAL ELECTRIC CVJ606NHW...

$173.01
Zoro GENERAL ELECTRIC CVJ606NHW Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/PXl8eoz2UgiDSaUeQiZ3Rg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Hinged Enclosure Cover Type, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, Enclosure Cover Features Clear, Nonmetallic Hinge, IP Rating 6511, Color RAL7035, Finish Smooth, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

General Wire Electric Floor...

$979.00
Global Industrial General Wire Electric Floor Model Machine W/ Power Feed, 75'X1/2 Cable & Cutter Set, P-Xp-D
No Shipping Info
/general-wire-electric/BWoSCDXUIzBocgO5lcxrRg==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 75'x1/2 Cable & Cutter Set The Mini-Rooter XP gives you extra portability because 8 semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps. The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4 to 4 in diameter with just one machine. The drum easily holds 75 feet of 3/8 or 1/2 cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or Dual Drum... Less
More

GENERAL ELECTRIC CVJ606HW...

$156.51
Zoro GENERAL ELECTRIC CVJ606HW Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric-cvj606hw/TNXMw7vjrPohwqf5ezyFug==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
NonMetallic Enclosure, NEMA Rating 4X, Fiberglass Reinforced Polyester, Length 6.00 In, Width 6.00 In, Depth 4.21 In, Finish Gray, Clear/S.S. Hinged Cover Type, Lid Hinge, Seamless Polyurethane Foam Gasket, VJ Series, Interior Panel G0353893, G2983303 or 2HRN1, Color Gray, Standards IEC 4391,IEC 529 Rated IP6611,EN50298, UL 508A Types 3, 3R, 4, 4X, 12 And 13
More

General Wire Electric Floor...

$915.00
Global Industrial General Wire Electric Floor Model Machine W/ Power Feed, 75'X3/8 Cable & Cutter Set, P-Xp-B
No Shipping Info
/general-wire-electric/xMMXVsbrmkTopm8AO0YDaA==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 75'x3/8 Cable & Cutter Set The Mini-Rooter XP gives you extra portability because 8 semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps. The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4 to 4 in diameter with just one machine. The drum easily holds 75 feet of 3/8 or 1/2 cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or Dual Drum... Less
More

GENERAL ELECTRIC VJ606NHWLL1...

$150.58
Zoro GENERAL ELECTRIC VJ606NHWLL1 Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/9b6djWpJpRlImcWYxRRHyg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
NonMetallic Enclosure, NEMA Rating 4X, Fiberglass Reinforced Polyester, Length 6.00 In, Width 6.00 In, Depth 4.21 In, Finish Gray, Opaque/Non Metallic Hinged Cover Type, Latch Type Twist Latch, Lid Hinge, Seamless Polyurethane Foam Gasket, VJ Series, Interior Panel G0353893, G2983303 or 2HRN1, Color Gray, Standards IEC 4391,IEC 529 Rated IP6611,EN50298, UL 508A Types 3, 3R, 4, 4X, 12 And 13
More

GENERAL 164 T Handle Tap...

$13.37
Walmart.com GENERAL 164 T Handle Tap Wrench,Sliding,0 to 1/4 In
+ $5.00 shipping
/general-164-t-handle-tap/ziGsdtNbJwMkGEYPL16fog==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Sliding, Fractional Tap Capacity (In.) 1/4, Machine Screw Tap Capacity 0 to 14, Metric Tap Capacity 1.6 to 6.3mm, Body Length (In.) 2-3/4 Features Body Length (In.) : 2-3/4 Fractional Tap Capacity (In.) : 1/4 Item : T Handle Tap Wrench Type : Sliding Machine Screw Tap Capacity : 0 to 1/4 Number : 164 Metric Tap Capacity : 1.6 to 6.3mm
More

GENERAL ELECTRIC CVJ606NHWPL1...

$163.58
Zoro GENERAL ELECTRIC CVJ606NHWPL1 Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/HOHArF_O9TtWEpyjFlQtlw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Hinged Padlockable Enclosure Cover Type, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, Enclosure Cover Features Clear, Nonmetallic Hinge, IP Rating 6511, Color RAL7035, Finish Smooth, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

GENERAL ELECTRIC CVJ606NHWLL1...

$167.40
Zoro GENERAL ELECTRIC CVJ606NHWLL1 Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/J3YGW0I1JD5RQRlvuuB1QA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Hinged Enclosure Cover Type, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, Enclosure Cover Features Clear, Nonmetallic Hinge, Twist Latch, IP Rating 6511, Color RAL7035, Finish Smooth, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

41 Pc. Metric Tap & Hex Die...

$153.95
Global Industrial 41 Pc. Metric Tap & Hex Die Set
No Shipping Info
/41-pc-metric-tap-hex/o1_HBkntwqTzV2bRXQWX3Q==/info
Global Industrial
IN_STOCK ( In stock )
41-pc Metric Tap & Hex Die Set IRWIN Industrial Tools sets the standard for delivering quality every step of the way in your threading applications. 41-pc set in plastic case includes the following items: Metric Plug Tap and 5/8 Hexagon Dies in sizes: 3mm - 0.50, 4mm - 0.70, 4mm - 0.75, 5mm - 0.80, 5mm - 0.90, 6mm - 1.00 Metric Plug Tap and 1 Hexagon Dies in sizes: 7mm - 1.00, 8mm - 1.00, 8mm - 1.25, 9mm - 1.00, 9mm - 1.25, 10mm - 1.25, 10mm - 1.50, 11mm - 1.50, 12mm - 1.50, 12mm - 1.75 Pipe Thread Plug Tap and 1 Hexagon Dies in sizes: 1/8 - 28 BSP Threading Tools: Adjustable Die Stock - 1 Dies, Plain Die Stock - 5/8 Hexagon Dies, Adj. Handle Tap Wrench - Taps No. 0 to 1/4, Two-in-One Tap Wrench - taps 1/4 to 1/2, 16 Leaf Metric Thread Pitch Gauge, Empty Plastic Case 12.75 L. 5.75 W... Less
More

GENERAL 167 Tap Wrench Set, 0...

$25.79
Walmart.com GENERAL 167 Tap Wrench Set, 0 to 1/2 In, 3 pc
+ $5.00 shipping
/general-167-tap-wrench/GBJxAp1A5c5mvYrdMoUKEQ==/info
Walmart.com
IN_STOCK ( In stock )
Tap Wrench Set, Standard, Steel, Machine Finish, Number of Pieces 3, Cutting Sizes 1/4, 1/2 In., Die Type None, Size/Range 0 to 1/2 In., Standard Thread Type, Includes (1) T-Handle Tap Wrench 0 to 1/4 In. (1.6 to 6.3mm), 2-3/4 In. (70mm) Long, (1) T-Handle Tap Wrench 12 to 1/2 In. (6 to 12mm), 3-3/4 In. (95mm) Long, Guide and Case Features Finish : Machine Includes : (1) T-Handle Tap Wrench (6TFF5) 0 to 1/4 (1.6 to 6.3mm), 2-3/4 (70mm) Long, (1) T-Handle Tap Wrench (6TFF7)12 to 1/2 (6 to 12mm), 3-3/4 (95mm) Long, Guide and Case Item : Tap Wrench Set Material : Steel Number of Pieces : 3 Type : Standard Cutting Sizes : 1/4, 1/2 Size/Range : 0 to 1/2 Thread Type : Standard Die Type : None
More

Tap Board 4' X 2 '

$81.00
Discount Dance Supply Tap Board 4' X 2 '
+ $2.95 shipping
/tap-board-4-x-2/2-xRguJyfKrFVzVo-D_hHA==/info
Discount Dance Supply
IN_STOCK ( In stock )
Tap Board Is New And Improved. Beveled Edges - Built-in Handle - Computer- manufactured Design. Stagestep's New Tap Board Offers Great Sound At Home With An Improved Look And Finish. Computer- manufactured To Increase Design Accuracy, It Features Beveled In Place Of Sharp Edges To Protect Dancers And Has A Built-in Handle For Easy Transportability. This New Tap Board Is Available In Two Sizes Both With A 5/8 Thick Wood/timestep Laminated Tap Surface And 3/4 High-density Foam Shock Layer. As With Stage Step's Traditional Board, The New Tap Board Will Fit In Any Closet, Under Any Bed, And In The Trunk Of Your Car For Travel. It Is Still Light Enough To Be Handled By Just About Anyone, Cushioned Underneath To Protect Floors And Provide Safety For The Dancer, And Great Over Virtually Any... Less
More

GENERAL 163 Tap Wrench,T...

$11.00
Walmart.com GENERAL 163 Tap Wrench,T Handle,Rigid,0 to 8
+ $5.00 shipping
/general-163-tap-wrencht/VzuyMUaHNd3rrdwXpYGMMg==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Rigid, Fractional Tap Capacity (In.) 5/32, Machine Screw Tap Capacity 0 to 8, Metric Tap Capacity 1.6 to 4mm, Body Length (In.) 2-1/4 Features Body Length (In.) : 2-1/4 Fractional Tap Capacity (In.) : 5/32 Item : T Handle Tap Wrench Type : Rigid Machine Screw Tap Capacity : 0 to 8 Number : 163 Metric Tap Capacity : 1.6 to 4mm
More

Tap Magic 702-10004E Tap...

$3.01
homelectrical Tap Magic 702-10004E Tap Magic with EP-Xtra, 4 oz
No Shipping Info
/tap-magic-70210004e-tap/YbaqNgVHXqpo_l2AGiKx9w==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This Tap magic allows for outstanding performance for any cutting operation on any metal. This product work extremely well on hard metals and on cuts requiring extreme pressure or long cutting times. . Capacity Vol: 4 oz. Packing Type: Can with Spout. Weight: .33 lb. (Tap Magic 702-10004E)
More

GENERAL 165 Tap Wrench Set, 0...

$70.47
Walmart.com GENERAL 165 Tap Wrench Set, 0 to 1/2 In, 3 pc
Free Shipping
/general-165-tap-wrench/yGKxDU9KY775XN3OjvhXHQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Tap Wrench Set, Reversible, Ratchet, Steel, Machine Finish, Number of Pieces 3, Cutting Sizes 1/4, 1/2 In., Die Type None, Size/Range 0 to 1/2 In., Standard Thread Type, Includes (1) T-Handle Tap Wrench 0 to 1/4 In. (1.6 to 6.3mm), 3-1/2 In. (88mm) Long, (1) T-Handle Tap Wrench 12 to 1/2 In. (6 to 12mm), 4-1/4 In. (106mm) Long, Guide and Case Features Finish : Machine Includes : (1) T-Handle Tap Wrench (6TFF2) 0 to 1/4 (1.6 to 6.3mm), 3-1/2 (88mm) Long, (1) T-Handle Tap Wrench (6TFF3) 12 to 1/2 (6 to 12mm), 4-1/4 (106mm) Long, Guide and Case Item : Tap Wrench Set Material : Steel Number of Pieces : 3 Type : Reversible, Ratchet Cutting Sizes : 1/4, 1/2 Size/Range : 0 to 1/2 Thread Type : Standard Die Type : None
More

GENERAL 165 Tap Wrench Set, 0...

$70.47
Zoro GENERAL 165 Tap Wrench Set, 0 to 1/2 In, 3 pc
Free Shipping
/general-165-tap-wrench/eoKbvfGvWQiRhRV-qnyH0A==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Tap Wrench Set, Reversible, Ratchet, Steel, Machine Finish, Number of Pieces 3, Cutting Sizes 1/4, 1/2 In., Die Type None, Size/Range 0 to 1/2 In., Standard Thread Type, Includes (1) THandle Tap Wrench 0 to 1/4 In. (1.6 to 6.3mm), 31/2 In. (88mm) Long, (1) THandle Tap Wrench 12 to 1/2 In. (6 to 12mm), 41/4 In. (106mm) Long, Guide and Case
More

Single Port Coax Tap - 5 To...

$2.09
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 16db
+ $3.99 shipping
/single-port-coax-tap-5/5RV0OlIeMPEKHtUbA3KFfw==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 16dB Frequency Range: 5-1000MHz Tap Loss: 16 +/- 1.5dB Insertion Loss: 1.2dB Isolation out to tap: 24dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps SKY2340-16
More

General Electric Keyless...

$6.00
eBay General Electric Keyless Current Tap Factory Sealed
Free Shipping
/general-electric-keyless/bgBK3um9Ssg3nus5cXSywg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
This is a factory sealed General Electric Keyless Current Tap. Adds two outlets to lamp socket. Polarized outlets with one wide slot insure properly aligned connection for polarized power cords.For standard medium base bulbs,
More

Hand Bell - Tap

$15.33
Pro-Med Products Hand Bell - Tap
+ $8.65 shipping
/hand-bell-tap/U0KX96EeVvABn_NR0E9izA==/info
Pro-Med Products
IN_STOCK ( In stock )
Hand Bell - Tap Ideal for private treatment areas Alert therapists when you require assistance Great for reception or appointment desks The Clinic Tap Bell is the perfect accessory for private treatment areas or any area where clients are left alone during modality or other treatments. Provides a method for clients to alert therapists when they require assistance. Also useful at reception or appointment desk.
More

Posi-Tap Mini Assortment ...

$8.99
Crutchfield Posi-Tap Mini Assortment Posi-Tap Reduced Size 6 pc Assortment
+ $6.99 shipping
/positap-mini-assortment/sv-oDO8be6OQ3ui8BXnVgQ==/info
Crutchfield
IN_STOCK ( In stock )
Posi-Tap Reduced Size 6 pc Assortment tap into 18- to 26-gauge wires without cutting or stripping them,asssortment of hand-tightened connectors for stranded wire,no crimping, soldering, or taping
More

General Tools Die Handles...

$29.97
Home Depot General Tools Die Handles #12-1/2 in. Ratchet Tap Wrench 162R
+ $5.99 shipping
/general-tools-die-handles/npf_adowrF56MBq1_cJJVA==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. General's Gardening and Agricultural test instruments are ideal for monitoring grain and fertilizer storage environments, testing soil alkalinity and controlling agricultural equipment temperatures. Our agricultural instruments have proven themselves beneficial in both backyard gardens and full-scale farming environments. For nearly a century, General Tools and Instruments has produced some of the most reliable hand tools on the market. Along with our popular Plumbing Tools, we have expanded our product line to include a variety of Test Instruments and HVAC Tools.
More

GENERAL 160R Tap Wrench,T...

$26.08
Walmart.com GENERAL 160R Tap Wrench,T Handle, Ratcheting,Rev,0 to8
+ $5.00 shipping
/general-160r-tap-wrencht/aUn_QCpDNc6_6Ql-3npIbQ==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 5/32, Machine Screw Tap Capacity 0 to 8, Metric Tap Capacity 1.6 to 4mm, Hand Reamer Capacity 1/8 In. Shank, Pipe Reamer Capacity 1/8 In. Shank, Shank Capacity (In.) 0.40 to 0.111 Square, Body Length (In.) 2-3/4, Function Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Features Body Length (In.) : 2-3/4 Fractional Tap Capacity (In.) : 5/32 Item : T Handle Tap Wrench Shank Capacity (In.) : 0.40 to 0.111 Square Type : Ratcheting, Reversible Function : Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Hand Reamer Capacity : 1/8 Shank Machine Screw Tap Capacity : 0 to 8 Number : 160R Pipe Reamer Capacity : 1/8 Shank Metric Tap Capacity : 1.6 to 4mm
More

Tap Magic 702-10016E Tap...

$9.35
homelectrical Tap Magic 702-10016E Tap Magic with EP-Xtra, 16 oz
No Shipping Info
/tap-magic-70210016e-tap/7EJHQnkpwy3VNVpSYMkKMw==/info
homelectrical
IN_STOCK ( In stock )
Store not rated
This tap magic cutting fluid allows for easier cutting operation on any metals. This product is without equal on hard metals and on cuts requiring extreme pressure or long cutting times. . Capacity Vol.:16 oz. Packing Type: Can with Spout. Weight: 1.22 lb. . (Tap Magic 702-10016E)
More

GENERAL 164 T Handle Tap...

$13.37
Zoro GENERAL 164 T Handle Tap Wrench,Sliding,0 to 1/4 In
+ $5.00 shipping
/general-164-t-handle-tap/6R0nMYF-W_c3dNR--7eKMg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
T Handle Tap Wrench, Sliding, Fractional Tap Capacity (In.) 1/4, Machine Screw Tap Capacity 0 to 14, Metric Tap Capacity 1.6 to 6.3mm, Body Length (In.) 23/4
More

GENERAL 161R Tap Wrench,...

$30.28
Walmart.com GENERAL 161R Tap Wrench, Ratcheting,Rev,0 to 1/4 In
+ $5.00 shipping
/general-161r-tap/aVDu_bv74naGpe_Fr4_UQw==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 1/4, Machine Screw Tap Capacity 0 to 14, Metric Tap Capacity 1.6 to 6.3mm, Hand Reamer Capacity 3/16 In. Shank, Pipe Reamer Capacity 1/4 In. Shank, Shank Capacity (In.) 0.08 to 0.2 Square, Body Length (In.) 3-1/2, Function Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Features Body Length (In.) : 3-1/2 Fractional Tap Capacity (In.) : 1/4 Item : T Handle Tap Wrench Shank Capacity (In.) : 0.08 to 0.2 Square Type : Ratcheting, Reversible Function : Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Hand Reamer Capacity : 3/16 Shank Machine Screw Tap Capacity : 0 to 1/4 Number : 161R Pipe Reamer Capacity : 1/4 Shank Metric Tap Capacity : 1.6 to... Less
More

GENERAL 162R Tap Wrench,...

$31.70
Walmart.com GENERAL 162R Tap Wrench, Ratcheting,Rev,12 to 1/2 In
+ $5.00 shipping
/general-162r-tap/cBQlVsQQjVjFi_hTs_R7zg==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 1/2, Machine Screw Tap Capacity 12 to 14, Metric Tap Capacity 6 to 12mm, Hand Reamer Capacity 5/16 In. Shank, Pipe Reamer Capacity 5/16 In. Shank, Pipe Taps 1/8 In., Shank Capacity (In.) 0.18 To 0.30 Square, Body Length (In.) 4-1/4, Function Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Features Body Length (In.) : 4-1/4 Fractional Tap Capacity (In.) : 1/2 Item : T Handle Tap Wrench Shank Capacity (In.) : 0.18 To 0.30 Square Type : Ratcheting, Reversible Function : Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Hand Reamer Capacity : 5/16 Shank Machine Screw Tap Capacity : 12 to 1/2 Number : 162R Pipe Reamer Capacity : 5/16 Shank Pipe Taps... Less
More

Punch & Tap Tools:, Punch &...

$7.93
Home Depot Punch & Tap Tools:, Punch & Tap Tools: Commercial Electric Electrical Tools 7 in. Wire Stripper and Cutter 06010
+ $5.99 shipping
/punch-tap-tools-punch/mrxHvU2VeieM_l5eYuHZIQ==/info
Home Depot
IN_STOCK ( In stock )
Shop for Electrical at The Home Depot. The curved-handle design of the Commercial Electric 7 in. Wire Stripper and Cutter makes it ideal for use in confined spaces. This tool offers a serrated nose for strong gripping of wire for bending, shaping, and pulling applications.
More

V-tap Guide, Standard Sizes...

$22.95
Walmart.com V-tap Guide, Standard Sizes 0-80 To 5/8
+ $9.79 shipping
/vtap-guide-standard/QL3IiOhxFhi9kDvBDYWKHw==/info
Walmart.com
IN_STOCK ( In stock )
features and benefits: universal & portable v-tap guide provides perpendicular alignment of taps on flat, round and square cornered materials 9 guide holes cover 32 standard ground thread tap sizes: 0-80, 1-64, 1-72, 2-56, 2-64, 3-48, 3-56, 4-36, 4-40, 4-48, 5-40, 5-44, 6-32, 6-36, 6-40, 8-32, 8-36, 8-40, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 5/8-11, 5/8-18 heat-treated nickel alloy steel provides durability and accuracy precicision ground base provides perpendicular alignment of tap on flat surfaces v-groove aligns tap on round and square cornered materials v-tap guide automatically aligns tap to the work surface for pecision alignment. The v-tap guide used with the v-drill guide provideds centere d and aligned drill hole - tap... Less
More

Single Port Coax Tap - 5 To...

$2.09
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 9db
+ $3.99 shipping
/single-port-coax-tap-5/GebSRrYoxdxOReRFgvVfSQ==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 9dB Frequency Range: 5-1000MHz Tap Loss: 9 +/- 1.5dB Insertion Loss: 2.2dB Isolation out to tap: 20dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps 240
More

GENERAL ELECTRIC TC100...

$11.66
Zoro GENERAL ELECTRIC TC100 Raintight Hub, 1 in. dia.
+ $5.00 shipping
/general-electric-tc100/SQXJQwK98dJkKYPJWRGlqQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Raintight Hub, Diameter 1 In., For Use With Load Center
More

GENERAL ELECTRIC TC300...

$30.60
Zoro GENERAL ELECTRIC TC300 Raintight Hub, 3 in. dia.
+ $5.00 shipping
/general-electric-tc300/cPO1-gMZUQJfSIh-U_9vQQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Raintight Hub, Diameter 3 In., For Use With Load Center
More

Single Port Coax Tap - 5 To...

$1.99
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 6db
+ $3.99 shipping
/single-port-coax-tap-5/fsHF3SCEDqVCtZ-H2JwOqQ==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 6dB Frequency Range: 5-1000MHz Tap Loss: 6 +/- 1.5dB Insertion Loss: 2.6dB Isolation out to tap: 20dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps 3240
More

GENERAL ELECTRIC TC75...

$11.66
Zoro GENERAL ELECTRIC TC75 Raintight Hub, 3/4 in. dia.
+ $5.00 shipping
/general-electric-tc75/NdrdrC0qQ93gb-VEI9Swaw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Raintight Hub, Diameter 3/4 In., For Use With Load Center
More

Wire, Punch & Tap Tools:...

$19.97
Home Depot Wire, Punch & Tap Tools: Commercial Electric Electrical Tools Coax Strip and Crimp Tool CE70803
+ $5.99 shipping
/wire-punch-tap-tools/_sRbenow9w1fRk7ejFkvtw==/info
Home Depot
IN_STOCK ( In stock )
Shop for Electrical at The Home Depot. The Commercial Electric Coax Strip and Crimp Tool features precision stripping holes to remove the outer jacket and insulation from coaxial cable. It offers durable blades for cutting copper-coated steel conductors and crimping nests for connectors and ring terminals.
More

GENERAL ELECTRIC TC125...

$11.66
Zoro GENERAL ELECTRIC TC125 Raintight Hub, 11/4 in. dia.
+ $5.00 shipping
/general-electric-tc125/Ylx_xxDkOoDucL_voYzHYQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Raintight Hub, Diameter 11/4 In., For Use With Load Center
More

General Tools 318-166 Plain...

$17.83
Walmart.com General Tools 318-166 Plain Tap Wrench No. 12To 1-2 Inch
+ $6.30 shipping
/general-tools-318166/L31wRv63RGxBkNE1X4KI4Q==/info
Walmart.com
IN_STOCK ( In stock )
Our standard Tap Wrenches are perfect for creating straight and accurate thread holes in your work piece- The sliding T-Handle provides a large gripping surface and allows for maneuverability and leverage in tight spaces- This versatile tool can also be used with reamers drill bits screw extractors and other hand-turned tools- Tap Wrench has a No- 12 to 1/2'' tap capacity- Great for mechanics machinists and maintenance professionals- Sliding T-handle provides leverage and maneuverability in tight spaces- Hardened steel jaws have self-centering chuck- Recommended for use along with our Tap Drill Reference Table (715)- SKU: ORSNO10148
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355