Category

Tools and Accessories
Showing results for "general electric current tap"
Results 1 - 40 of 1500+

GENERAL ELECTRIC PS3020A...

$1,087.20
Zoro GENERAL ELECTRIC PS3020A Enclosure, 2563/64 In. H, 169/64 In. W
Free Shipping
/general-electric-ps3020a/7WeS1G1nMwVMGxMrNyITHA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 29.53 In., Width 19.69 In., Depth 12.60 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 3, 3R, 3S, 4, 4X, 12, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features Opaque, Quarter Turn Latch, IP Rating 65, Color Light Gray, Polyurethane Gasket, Series PS, Wall Mounting, Usable Opening Depth 11.47 In., 2HRP1 or G3130985, Standards IEC 4391, IEC 529, EN 604391, CE Approved, RoHS Compliant
More

Tap and Die Set, 5/16 to 3/4...

$381.74
Walmart.com Tap and Die Set, 5/16 to 3/4 In, 58 pc 21739
Free Shipping
/tap-and-die-set-516-to/NM64rtWzGoTxy3xBHKKKkQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Tap and Die Set, SAE or Metric: SAE, Left/Right Hand: Right Hand, Material: Carbon Steel, Finish: Plain, Number of Pieces: 58, Die Type: 1 Hex, Sizes Included: #6-32 NC to 3/4-10 NC, #10-32 NF to 3/4-16 NF, 1/8-27 NPT, 1/4-18 NPT, Size/Range: 5/16 to 3/4, Thread Type: NC, NF and NPT, Includes: 23 Dies, Tap Wrench for #4-1/2, Tap Wrench for 1/4-1/2, Die Stock for 1 Rd or Hex Dies, Die Stock for 1-1/2 Rd or 1-7/16 Hex Dies, T-Handle Tap Wrench for 0-1/4, Thread Gauge for 10-40 US, Screwdriver 1/8 by 2-1/4 With Pocket Clip And Screw Extractors # 1-5
More

GENERAL ELECTRIC CVJ606W...

$117.28
Zoro GENERAL ELECTRIC CVJ606W Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric-cvj606w/B1zQxB8kH-Mak1kSAC85nA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Finish Smooth, Screw On Enclosure Cover Type, Enclosure Cover Features Clear, IP Rating 65, Color Light Gray, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., 2HRL9, 2HRA3 or G7619622, Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

GENERAL ELECTRIC CVJ606HW...

$161.33
Zoro GENERAL ELECTRIC CVJ606HW Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric-cvj606hw/TNXMw7vjrPohwqf5ezyFug==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
NonMetallic Enclosure, NEMA Rating 4X, Fiberglass Reinforced Polyester, Length 6.00 In, Width 6.00 In, Depth 4.21 In, Finish Gray, Clear/S.S. Hinged Cover Type, Lid Hinge, Seamless Polyurethane Foam Gasket, VJ Series, Interior Panel G0353893, G2983303 or 2HRN1, Color Gray, Standards IEC 4391,IEC 529 Rated IP6611,EN50298, UL 508A Types 3, 3R, 4, 4X, 12 And 13
More

General Pipe Cleaners...

$1,470.00
Global Industrial General Pipe Cleaners P-Me-C-S Electric Floor Model Machine W/Power Feed 100'X1/2 Cable&Cutter Set
No Shipping Info
/general-pipe-cleaners/OIowJe4xbg1S2ZZrbMUJIA==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100'x1/2 Cable & Cutter Set The Metro is a tough root cutting machine in a compact, lightweight package, at a price that's easy on tight budgets. With 100 feet of 9/16 cable it handles roots and other difficult obstructions in 3 to 6 lines - ideal for drain cleaners, plumbers, contractors and building maintenance. This easy to use, one-person operation machine is light enough to take down to the basement or up on the roof. The Metro has many of the features of the bigger capacity root cutting machines, including a variable speed Power Cable Feed that drives and retracts 9/16, 5/8, and 3/4 cable at up to 20 ft. per minute. The heavy-duty powder coated steel drum holds 100 ft. of 9/16 cable for inside lines, 75 ft. of 5/8... Less
More

TimePilot Tap+ Portable Time...

$299.99
Northern Tool TimePilot Tap+ Portable Time Clock - Includes Starter Kit, Model 4550
+ $5.99 shipping
/timepilot-tap-portable/XxTUIJlaM1-nohJ1DGFB1A==/info
Northern Tool
IN_STOCK ( In stock )
This TimePilot Tap+ Portable Time Clock stops time theft and frees you from the error-prone task of calculating employee hours each week. Employees clock in electronically using an iButton 10 included. TimePilot Tap+ automatically handles rounding, overtime, holiday pay, multiple shifts and departments and much more, plus prevents time card alterations - no more buddy punching. Tap+ also prepares reports and exports data. Indoor/Outdoor Use Indoor/outdoor, Power Source Battery, Compatible With Windows PC, Dimensions L x W x H in. 3 x 4 x 1 1/2, Control Type iButton, Capacity 2,000 employees, Software Included Yes, Connector Type USB. Handles up to 2000 employees Durable, battery-powered unit fits in your pocket, briefcase or toolbox Can be connected to desktop computer to download data or... Less
More

GENERAL ELECTRIC AN2416PL...

$471.78
Zoro GENERAL ELECTRIC AN2416PL Enclosure, 2241/64 In. H, 1437/64 In. W
Free Shipping
/general-electric-an2416pl/ZP0qa1726pMozBwCpSUsHw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 24.21 In., Width 16.34 In., Depth 9.06 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 2, 3, 3R, 4, 4X, 12, 13, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features Opaque, Latched, IP Rating 66, Color Light Gray, Polyurethane Gasket, Series Aria, Wall Mounting, Usable Opening Depth 8.72 In., 2HPZ1 or G0637786, Standards IEC 4391, IEC 529, EN 604391, EN 60529, CE Approved, RoHS Compliant
More

GENERAL ELECTRIC ANB2016...

$806.40
Zoro GENERAL ELECTRIC ANB2016 Enclosure, 1845/64 In. H, 1437/64 In. W
Free Shipping
/general-electric-anb2016/ozOdBSGT7muScPYUZYzXug==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 20.28 In., Width 16.34 In., Depth 9.06 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 2, 3, 3R, 4, 4X, 12, 13, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features 1/4 Turn Latch, Clear Bonded Window, IP Rating 66, Color Light Gray, Polyurethane Gasket, Series Aria, Wall Mounting, Usable Opening Depth 8.72 In., 2HRD4 or G0606042, Standards IEC 4391, IEC 529, EN 604391, EN 60529, CE Approved, RoHS Compliant
More

General Pipe Cleaners P-Xp-D...

$979.00
Global Industrial General Pipe Cleaners P-Xp-D Electric Floor Model Machine W/ Power Feed, 75'X1/2 Cable & Cutter Set
No Shipping Info
/general-pipe-cleaners/BWoSCDXUIzBocgO5lcxrRg==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 75'x1/2 Cable & Cutter Set The Mini-Rooter XP gives you extra portability because 8 semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps. The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4 to 4 in diameter with just one machine. The drum easily holds 75 feet of 3/8 or 1/2 cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or Dual Drum... Less
More

GENERAL ELECTRIC ANB2416...

$880.48
Zoro GENERAL ELECTRIC ANB2416 Enclosure, 2241/64 In. H, 1437/64 In. W
Free Shipping
/general-electric-anb2416/jjbRUXVMhUp4IpuAq3K_FQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 24.21 In., Width 16.34 In., Depth 9.06 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 2, 3, 3R, 4, 4X, 12, 13, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features 1/4 Turn Latch, Clear Bonded Window, IP Rating 66, Color Light Gray, Polyurethane Gasket, Series Aria, Wall Mounting, Usable Opening Depth 8.72 In., 2HPZ1 or G0637786, Standards IEC 4391, IEC 529, EN 604391, EN 60529, CE Approved, RoHS Compliant
More

General Tools Tap Reversible...

$27.99
Quill.com General Tools Tap Reversible Ratchet Wrench, #0-1/4 in Tap, 3 1/2 in
Free Shipping
/general-tools-tap/OnUuarFGVl1_vn_qxiDw7Q==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Self-centering hardened steel jaws and knurledchuck sleeve provide positive grip on taps,reamers and small tools. Sliding t-handle for fitting into tight spaces withoperator leverage
More

GENERAL ELECTRIC CVJ606NHWPL1...

$163.58
Zoro GENERAL ELECTRIC CVJ606NHWPL1 Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/HOHArF_O9TtWEpyjFlQtlw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features Clear, IP Rating 65, Color Light Gray, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., 2HRL9, 2HRA3 or G7619622, Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

GENERAL ELECTRIC CVJ606NHWLL1...

$167.40
Zoro GENERAL ELECTRIC CVJ606NHWLL1 Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/J3YGW0I1JD5RQRlvuuB1QA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features Clear, Stainless Steel Hinge, Twist Latch, IP Rating 65, Color Light Gray, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., 2HRL9, 2HRA3 or G7619622, Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

GENERAL ELECTRIC VJ606NHW...

$118.89
Zoro GENERAL ELECTRIC VJ606NHW Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric-vj606nhw/K7-T_ojQrlLk6FLXXwxo5Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
NonMetallic Enclosure, NEMA Rating 4X, Fiberglass Reinforced Polyester, Length 6.00 In, Width 6.00 In, Depth 4.21 In, Finish Gray, Opaque/Non Metallic Hinged Cover Type, Lid Hinge, Seamless Polyurethane Foam Gasket, VJ Series, Interior Panel G0353893, G2983303 or G7619622, Color Gray, Standards IEC 4391,IEC 529 Rated IP6611,EN50298, UL 508A Types 3, 3R, 4, 4X, 12 And 13
More

General Pipe Cleaners P-Xp-B...

$915.00
Global Industrial General Pipe Cleaners P-Xp-B Electric Floor Model Machine W/ Power Feed, 75'X3/8 Cable & Cutter Set
No Shipping Info
/general-pipe-cleaners/xMMXVsbrmkTopm8AO0YDaA==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 75'x3/8 Cable & Cutter Set The Mini-Rooter XP gives you extra portability because 8 semi-pneumatic wheels let you keep the weight on the ground. An easy-grip handle folds down to save space and locks to use as an additional lifting handle. A roll bar protects the 1/3 hp motor when going up or down stairs. And the power cord and foot pedal can be stowed away on convenient cord wraps. The XP gives you extra performance and value, enabling you to clear clogged drain lines from 1-1/4 to 4 in diameter with just one machine. The drum easily holds 75 feet of 3/8 or 1/2 cable and features a free floating inner drum with an integral distributor tube to help prevent cable tangling. By switching to the optional J-Drum or Dual Drum... Less
More

GENERAL ELECTRIC CVJ606NHW...

$164.36
Zoro GENERAL ELECTRIC CVJ606NHW Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/PXl8eoz2UgiDSaUeQiZ3Rg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 7.31 In., Width 7.31 In., Depth 4.92 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features Clear, IP Rating 65, Color Light Gray, Polyurethane Gasket, Series VJ, Wall Mounting, Usable Opening Depth 4.64 In., 2HRL9, 2HRA3 or G7619622, Standards IEC 4391, IEC 529, EN 50298, UL 508A, CE Certified, RoHS Compliant
More

Tap Board 4' X 2'

+ $2.95 shipping
/tap-board-4-x-2/2-xRguJyfKrFVzVo-D_hHA==/info
Discount Dance Supply
IN_STOCK ( In stock )
Tap Board Is New And Improved. Beveled Edges - Built-in Handle - Computer- manufactured Design. Stagestep's New Tap Board Offers Great Sound At Home With An Improved Look And Finish. Computer- manufactured To Increase Design Accuracy, It Features Beveled In Place Of Sharp Edges To Protect Dancers And Has A Built-in Handle For Easy Transportability. This New Tap Board Is Available In Two Sizes Both With A 5/8 Thick Wood/timestep Laminated Tap Surface And 3/4 High-density Foam Shock Layer. As With Stage Step's Traditional Board, The New Tap Board Will Fit In Any Closet, Under Any Bed, And In The Trunk Of Your Car For Travel. It Is Still Light Enough To Be Handled By Just About Anyone, Cushioned Underneath To Protect Floors And Provide Safety For The Dancer, And Great Over Virtually Any... Less
More

GENERAL ELECTRIC...

$230.40
Zoro GENERAL ELECTRIC GEGCS1210BOXB Enclosure, 135/16 In. H, 115/16 In. W
Free Shipping
/general-electric/enHckqndHnh1Qdjtz6AuyA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Enclosure, Nonmetallic, Height 13.31 In., Width 11.31 In., Depth 5.60 In., Material Fiberglass Reinforced Polyester, No Knockouts, NEMA Rating 3, 3R, 3S, 4, 4X, 12, Finish Smooth, Hinged Enclosure Cover Type, Enclosure Cover Features Opaque, IP Rating 65, Color Light Gray, Polyurethane Gasket, Series VJ, Wall Mounting, Standards IEC 4391, IEC 529, EN 604391
More

GENERAL 163 Tap Wrench,T...

$9.90
Walmart.com GENERAL 163 Tap Wrench,T Handle,Rigid,0 to 8
+ $5.00 shipping
/general-163-tap-wrencht/VzuyMUaHNd3rrdwXpYGMMg==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Rigid, Fractional Tap Capacity (In.) 5/32, Machine Screw Tap Capacity 0 to 8, Metric Tap Capacity 1.6 to 4mm, Body Length (In.) 2-1/4 Features Body Length (In.) : 2-1/4 Fractional Tap Capacity (In.) : 5/32 Item : T Handle Tap Wrench Type : Rigid Machine Screw Tap Capacity : 0 to 8 Number : 163 Metric Tap Capacity : 1.6 to 4mm
More

GENERAL ELECTRIC VJ606NHWLL1...

$143.05
Zoro GENERAL ELECTRIC VJ606NHWLL1 Enclosure, 6 In. H, 6 In. W, 47/32 In. D
Free Shipping
/general-electric/9b6djWpJpRlImcWYxRRHyg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
NonMetallic Enclosure, NEMA Rating 4X, Fiberglass Reinforced Polyester, Length 6.00 In, Width 6.00 In, Depth 4.21 In, Finish Gray, Opaque/Non Metallic Hinged Cover Type, Latch Type Twist Latch, Lid Hinge, Seamless Polyurethane Foam Gasket, VJ Series, Interior Panel G0353893, G2983303 or 2HRN1, Color Gray, Standards IEC 4391,IEC 529 Rated IP6611,EN50298, UL 508A Types 3, 3R, 4, 4X, 12 And 13
More

General Pipe Cleaners Ps-92-C...

$1,780.00
Global Industrial General Pipe Cleaners Ps-92-C Electric Floor Model Machine W/Power Feed,100'X3/4 Cable & Cutter Set
No Shipping Info
/general-pipe-cleaners/59z8Lln5IFhhQVgsFWMhCw==/info
Global Industrial
IN_STOCK ( In stock )
General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100'x3/4 Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2 cable (available separately), a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4, 5/8, and 1/2 cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4 or 5/8 cables, you simply turn the knob on top of the feed. The screwdriver stays in the tool box. Getting to and from the job is easier because the Speedrooter 92 has big ten-inch wheels, V-belt stair climbers to get up and down stairs easier, and a loading wheel... Less
More

Single Port Coax Tap - 5 To...

$2.09
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 9db
+ $3.99 shipping
/single-port-coax-tap-5/GebSRrYoxdxOReRFgvVfSQ==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 9dB Frequency Range: 5-1000MHz Tap Loss: 9 +/- 1.5dB Insertion Loss: 2.2dB Isolation out to tap: 20dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps 240
More

''''perfect Cut'''' Premium...

$25.99
Brownells ''''perfect Cut'''' Premium Tap - 8-40 Bottom Three-Flute Tap
+ $7.95 shipping
/perfect-cut/-7wpljODu4x2FSVdfCivVw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Not magic, just perfect! When we first tried these taps (recommended by customer Dan Baldwin), we thought they were extra hard, coated or treated somehow . . . they're that much better than any tap we've ever used before. But, the U.S. company that's been making them since 1912 says the secret is plain old care and quality control. The ground threads are held to incredibly tight tolerances for roundness, thread spacing, etc. Result is, all the teeth cut equally so the whole tapping process goes faster, the taps last longer, breakage is cut way down and the threads are the finest you'll ever see. Try them; you'll tap more holes per tap than you thought possible! Premi Mfg: Reiff & Nestor Company SPECS: H-2, High Speed tool steel.
More

Posi-Tap Mini Assortment ...

$8.99
Crutchfield Posi-Tap Mini Assortment Posi-Tap Reduced Size 6 pc Assortment
+ $6.99 shipping
/positap-mini-assortment/sv-oDO8be6OQ3ui8BXnVgQ==/info
Crutchfield
IN_STOCK ( In stock )
Posi-Tap Reduced Size 6 pc Assortment tap into 18- to 26-gauge wires without cutting or stripping them,asssortment of hand-tightened connectors for stranded wire,no crimping, soldering, or taping
More

GENERAL 167 Tap Wrench Set, 0...

$25.79
Walmart.com GENERAL 167 Tap Wrench Set, 0 to 1/2 In, 3 pc
+ $5.00 shipping
/general-167-tap-wrench/GBJxAp1A5c5mvYrdMoUKEQ==/info
Walmart.com
IN_STOCK ( In stock )
Tap Wrench Set, Standard, Steel, Machine Finish, Number of Pieces 3, Cutting Sizes 1/4, 1/2 In., Die Type None, Size/Range 0 to 1/2 In., Standard Thread Type, Includes (1) T-Handle Tap Wrench 0 to 1/4 In. (1.6 to 6.3mm), 2-3/4 In. (70mm) Long, (1) T-Handle Tap Wrench 12 to 1/2 In. (6 to 12mm), 3-3/4 In. (95mm) Long, Guide and Case Features Finish : Machine Includes : (1) T-Handle Tap Wrench (6TFF5) 0 to 1/4 (1.6 to 6.3mm), 2-3/4 (70mm) Long, (1) T-Handle Tap Wrench (6TFF7)12 to 1/2 (6 to 12mm), 3-3/4 (95mm) Long, Guide and Case Item : Tap Wrench Set Material : Steel Number of Pieces : 3 Type : Standard Cutting Sizes : 1/4, 1/2 Size/Range : 0 to 1/2 Thread Type : Standard Die Type : None
More

Taps: General Tools Wrenches...

$24.98
Home Depot Taps: General Tools Wrenches Reversible Ratchet 161R
+ $6.99 shipping
/taps-general-tools/detrAjEtXzk3DkW48UR6Bw==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. This Ratchet can be set for right- or left-hand operation or locked for non-ratchet use. Self-centering, hardened tool steel jaws and knurled chuck sleeve provide positive grip on taps, reamer's and small tools. Sliding T-handle for fitting into tight spaces with operator leverage.
More

Single Port Coax Tap - 5 To...

$2.09
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 16db
+ $3.99 shipping
/single-port-coax-tap-5/5RV0OlIeMPEKHtUbA3KFfw==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 16dB Frequency Range: 5-1000MHz Tap Loss: 16 +/- 1.5dB Insertion Loss: 1.2dB Isolation out to tap: 24dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps SKY2340-16
More

Tap Wrenches - Tap Wrench...

$16.99
Brownells Tap Wrenches - Tap Wrench Wrench No. 1, 9 1/4'''' Long, Fits 0 To 1/2''''
+ $7.95 shipping
/tap-wrenches-tap-wrench/YlAaZ_i7vlWGkjMb3rscwA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
No. 1, 9-¼ long, fits 0 to ½ taps with square shank measuring up to .332 across the flats. No. 2, 18, fits ¼ to 1 taps with square shank measuring up to .655 across the flats. Mfg: Irwin Industrial Tool Co.
More

GENERAL 160R Tap Wrench,T...

$26.08
Walmart.com GENERAL 160R Tap Wrench,T Handle, Ratcheting,Rev,0 to8
+ $5.00 shipping
/general-160r-tap-wrencht/aUn_QCpDNc6_6Ql-3npIbQ==/info
Walmart.com
IN_STOCK ( In stock )
T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 5/32, Machine Screw Tap Capacity 0 to 8, Metric Tap Capacity 1.6 to 4mm, Hand Reamer Capacity 1/8 In. Shank, Pipe Reamer Capacity 1/8 In. Shank, Shank Capacity (In.) 0.40 to 0.111 Square, Body Length (In.) 2-3/4, Function Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Features Body Length (In.) : 2-3/4 Fractional Tap Capacity (In.) : 5/32 Item : T Handle Tap Wrench Shank Capacity (In.) : 0.40 to 0.111 Square Type : Ratcheting, Reversible Function : Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use Hand Reamer Capacity : 1/8 Shank Machine Screw Tap Capacity : 0 to 8 Number : 160R Pipe Reamer Capacity : 1/8 Shank Metric Tap Capacity : 1.6 to 4mm
More

Instant Tap Connectors with...

$4.40
Deep Surplus Instant Tap Connectors with Stop for 12-10 Wire- Yellow (Bag of 25)
No Shipping Info
/instant-tap-connectors/U2XXJfFb-hGKrrC4NiGxbA==/info
Deep Surplus
IN_STOCK ( In stock )
Comes in bags of 25 each.
More

General Tools Die Handles...

$25.98
Home Depot General Tools Die Handles #12-1/2 in. Ratchet Tap Wrench 162R
+ $5.99 shipping
/general-tools-die-handles/npf_adowrF56MBq1_cJJVA==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. Since 1910, General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. General's Gardening and Agricultural test instruments are ideal for monitoring grain and fertilizer storage environments, testing soil alkalinity and controlling agricultural equipment temperatures. Our agricultural instruments have proven themselves beneficial in both backyard gardens and full-scale farming environments. For nearly a century, General Tools and Instruments has produced some of the most reliable hand tools on the market. Along with our popular Plumbing Tools, we have expanded our product line to include a variety of Test Instruments and HVAC Tools.
More

GENERAL 161R Tap Wrench,...

$30.28
Zoro GENERAL 161R Tap Wrench, Ratcheting,Rev,0 to 1/4 In
+ $5.00 shipping
/general-161r-tap/9rO9Z_4aOMEvClCgQV5puQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
T Handle Tap Wrench, Ratcheting, Reversible, Fractional Tap Capacity (In.) 1/4, Machine Screw Tap Capacity 0 to 14, Metric Tap Capacity 1.6 to 6.3mm, Hand Reamer Capacity 3/16 In. Shank, Pipe Reamer Capacity 1/4 In. Shank, Shank Capacity (In.) 0.08 to 0.2 Square, Body Length (In.) 31/2, Function Can be Set to Ratchet for Right or Left Hand Operation or Locked for Non Ratchet Use
More

Single Port Coax Tap - 5 To...

$1.99
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 6db
+ $3.99 shipping
/single-port-coax-tap-5/fsHF3SCEDqVCtZ-H2JwOqQ==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 6dB Frequency Range: 5-1000MHz Tap Loss: 6 +/- 1.5dB Insertion Loss: 2.6dB Isolation out to tap: 20dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps 3240
More

GENERAL 165 Tap Wrench Set, 0...

$70.47
Walmart.com GENERAL 165 Tap Wrench Set, 0 to 1/2 In, 3 pc
Free Shipping
/general-165-tap-wrench/yGKxDU9KY775XN3OjvhXHQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Tap Wrench Set, Reversible, Ratchet, Steel, Machine Finish, Number of Pieces 3, Cutting Sizes 1/4, 1/2 In., Die Type None, Size/Range 0 to 1/2 In., Standard Thread Type, Includes (1) T-Handle Tap Wrench 0 to 1/4 In. (1.6 to 6.3mm), 3-1/2 In. (88mm) Long, (1) T-Handle Tap Wrench 12 to 1/2 In. (6 to 12mm), 4-1/4 In. (106mm) Long, Guide and Case Features Finish : Machine Includes : (1) T-Handle Tap Wrench (6TFF2) 0 to 1/4 (1.6 to 6.3mm), 3-1/2 (88mm) Long, (1) T-Handle Tap Wrench (6TFF3) 12 to 1/2 (6 to 12mm), 4-1/4 (106mm) Long, Guide and Case Item : Tap Wrench Set Material : Steel Number of Pieces : 3 Type : Reversible, Ratchet Cutting Sizes : 1/4, 1/2 Size/Range : 0 to 1/2 Thread Type : Standard Die Type : None
More

Posi-Products Connector Kit ...

$8.99
Crutchfield Posi-Products Connector Kit 6 pieces Posi-Tap Assortment
+ $6.99 shipping
/posiproducts-connector/QkyWY6jgRwsrn1ruJm99MA==/info
Crutchfield
IN_STOCK ( In stock )
6 pieces Posi-Tap Assortment tap into 10- to 22-gauge wires without cutting or stripping them,hand-tightene d connectors for stranded wire,no crimping, soldering, or taping
More

Punch & Tap Tools:, Punch &...

$7.93
Home Depot Punch & Tap Tools:, Punch & Tap Tools: Commercial Electric Electrical Tools 7 in. Wire Stripper and Cutter 06010
+ $5.99 shipping
/punch-tap-tools-punch/mrxHvU2VeieM_l5eYuHZIQ==/info
Home Depot
IN_STOCK ( In stock )
Shop for Electrical at The Home Depot. The curved-handle design of the Commercial Electric 7 in. Wire Stripper and Cutter makes it ideal for use in confined spaces. This tool offers a serrated nose for strong gripping of wire for bending, shaping, and pulling applications.
More

''''perfect Cut'''' Premium...

$8.25
Brownells ''''perfect Cut'''' Premium Tap - 6-40 Plug Three-Flute Tap
+ $7.95 shipping
/perfect-cut/hoyxgk0kQYP-bZ_kDFg-2A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Not magic, just perfect! When we first tried these taps (recommended by customer Dan Baldwin), we thought they were extra hard, coated or treated somehow . . . they're that much better than any tap we've ever used before. But, the U.S. company that's been making them since 1912 says the secret is plain old care and quality control. The ground threads are held to incredibly tight tolerances for roundness, thread spacing, etc. Result is, all the teeth cut equally so the whole tapping process goes faster, the taps last longer, breakage is cut way down and the threads are the finest you'll ever see. Try them; you'll tap more holes per tap than you thought possible! Premi Mfg: Reiff & Nestor Company SPECS: H-2, High Speed tool steel.
More

GENERAL ELECTRIC VM554...

$32.54
Zoro GENERAL ELECTRIC VM554 Enclosure, 411/16 In. H, 411/16 In. W
+ $5.00 shipping
/general-electric-vm554/6wnq0DSHvYyzIgAilN5ctQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Enclosure, Nonmetallic, Height 5.03 In., Width 5.03 In., Depth 4.02 In., Material Valox Crystalline Thermoplasticpoly ester, No Knockouts, NEMA Rating 3, 3R, 4, 4X, 12, 13, Finish Smooth, Screw On Enclosure Cover Type, Enclosure Cover Features Opaque, IP Rating 66, Color Light Gray, Silicone Gasket, Series VM, Wall Mounting, Usable Opening Depth 3.72 In., Includes Nonmetallic Cover Screws, Standards CE Approved, RoHS Compliant
More

Single Port Coax Tap - 5 To...

$2.09
ShowMeCables Single Port Coax Tap - 5 To 1000 Mhz - 20db
+ $3.99 shipping
/single-port-coax-tap-5/lq0CO8itwi-FxmqKQNsVnw==/info
ShowMeCables
IN_STOCK ( In stock )
Store not rated
Coax taps are used when one source needs to feed multiple devices in the same location. This signal port coax tap has one feed through port and a one tap port. The feed through port typically will go to the next coax tap in the line. The tap port will be used for the device. Features: 75 Ohm Tap Value: 20dB Frequency Range: 5-1000MHz Tap Loss: 20 +/- 1.5dB Insertion Loss: 1.2dB Isolation out to tap: 28dB Return Loss: 15dB All Ports F-type Female A/V & PC Equipment > Satellite / Antenna Hardware > Taps, A/V & PC Equipment > Satellite / Antenna Hardware > Taps SKY2340-20
More

GENERAL ELECTRIC TC75...

$11.66
Zoro GENERAL ELECTRIC TC75 Raintight Hub, 3/4 in. dia.
+ $5.00 shipping
/general-electric-tc75/NdrdrC0qQ93gb-VEI9Swaw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Raintight Hub, Length 3.25 In., Width 3.25 In., Diameter 3/4 In., For Use With PowerMark Gold and Plus Load Centers
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe144.sp17-28921
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe144.sp17-28921