Category

Tools and Accessories
Showing results for "gear motor 30 rpm"
Results 1 - 40 of 1500+

All Points 68-1164 9 RPM Gear...

$103.30
WebstaurantStore All Points 68-1164 9 RPM Gear Drive Motor - 230V
No Shipping Info
/all-points-681164-9-rpm/EL6xPfv1Lg7vQhY7Le0vFw==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1164 9 RPM gear drive motor replaces the burnt out or malfunctioning one in selected commercial toasters. 68-1164 From All Points
More

Gear Motor 230v, 9. 25/11 Rpm...

$118.43
SharpTekSupply.com Gear Motor 230v, 9. 25/11 Rpm For Savory - Part# 22743sp
+ $6.99 shipping
/gear-motor-230v-9-2511/vj5nuRVQaRVINHkulDIUHA==/info
SharpTekSupply. com
IN_STOCK ( In stock )
Store not rated
GEARMotor 230V, 9. 25/11 RPM for Savory - Part# 22743SPFits Savory Models: RB-33VS, RT-2MBKProduct Info: Gear Motor, Right Hand, Shaft 1/4 X 1, 230V, 50. 2 Ohms, 11 RPM, NON-Reversible, Replaces Savory Oem 61. 2 Ohms, 12. 6 RPM. ( for Oem Exact Use # 68-1106, Right Hand Motor but Can Be, Reversed for Left Hand. ), Savory, Oven RT-6PZ Pizza Baker. Toaster Units That Use # 42-1270 Potentiometer: Series: C-20, C-40, RB-33, RT-2.OEM part numbers are used for reference only, see our Policies for more details
More

Milwaukee Adjustable Clutch...

$159.99
CPO Milwaukee Milwaukee Adjustable Clutch Screwdriver, 0 - 1,200 RPM 6580-20
+ $6.99 shipping
/milwaukee-adjustable/l3u3mzO3yNolzQ5-b8qOsw==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Adjustable Clutch Screwdriver, 0-1,200 RPM - 6580-20. 6-7 x 3-1/2 in. Slotted Bit - 48-30-2601. 10-12 x 3-1/2 in. Slotted Bit - 48-30-2651. No. 2 Phillips Bit - 48-32-1050. 1/4 in. Bit Holder - 48-32-3050. Product Manual. Powerful 6.5 amp Milwaukee motor. Multi-position torque sensitive clutch - 10-140 in-lbs.. 10 ft. 2-wire Quik-Lok cord. All metal gear case and diaphragm
More

Milwaukee 6580-20 Adjustable...

$159.99
CPO Outlets Milwaukee 6580-20 Adjustable Clutch Screwdriver, 0 - 1,200 RPM
+ $6.99 shipping
/milwaukee-658020/qpVLTIb8GF59vzxU3WC9nw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Adjustable Clutch Screwdriver, 0-1,200 RPM - 6580-20. 6-7 x 3-1/2 in. Slotted Bit - 48-30-2601. 10-12 x 3-1/2 in. Slotted Bit - 48-30-2651. No. 2 Phillips Bit - 48-32-1050. 1/4 in. Bit Holder - 48-32-3050. Product Manual. Powerful 6.5 amp Milwaukee motor. Multi-position torque sensitive clutch - 10-140 in-lbs.. 10 ft. 2-wire Quik-Lok cord. All metal gear case and diaphragm
More

All Points 68-1226 3 RPM Gear...

$135.40
WebstaurantStore All Points 68-1226 3 RPM Gear Motor - 230V
No Shipping Info
/all-points-681226-3-rpm/En072hNfmV_G86kqtAALCw==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1226 3 RPM gear drive motor replaces the burnt-out or malfunctioning one on selected commercial toasters. 68-1226 From All Points
More

Milwaukee 6791-21 All Purpose...

Free Shipping
5 stores Milwaukee 6791-21 All Purpose Screwdriver rpm 2500 6.5a 6kx36
All Purpose Screwdriver, Clutch Snap Action Positive, No-Load RPM 0-2500, 6.5 Amps @ 120V, Cord...
More

JET 354026 GHD-20PFT 20-in...

Free Shipping
3 stores JET 354026 GHD-20PFT 20-in Geared Head Drill & Tap Press
More

All Points 68-1112 6.3 RPM...

$156.00
WebstaurantStore All Points 68-1112 6.3 RPM Gear Drive Motor - 208V
No Shipping Info
/all-points-681112-63/HTKOdxUHrv36O-SZoAX7mw==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1112 6.3 RPM gear drive motor replaces the burnt-out or malfunctioning one in selected commercial toasters. 208V. OEM exact fit. 68-1112 From All Points
More

All Points 68-1122 6.3 RPM...

$156.00
WebstaurantStore All Points 68-1122 6.3 RPM Gear Drive Motor - 230V
No Shipping Info
/all-points-681122-63/YcUou8NbqK_E9mxYuy1jqA==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1122 6.3 RPM gear drive motor replaces the burnt-out or malfunctioning one in selected commercial toasters. 230V. 68-1122 From All Points
More

Electric Powered Rotating...

$17.99
GardenFun.com Electric Powered Rotating Motor (30 RPM)
+ $8.95 shipping
/electric-powered-rotating/qn6oMlyxFNKn5zN4y4XO9Q==/info
GardenFun.com
IN_STOCK ( In stock )
Store not rated
No wind for your spinner? Want your spinner indoors? Need something to spin a display? No problem.Simply attach your wind spinner to this handy Electric Powered motor and watch your decoration spin night and day. On/Off switch on side. Come with 50 inch cord to plug in the wall.A perfect 30 RPM spin speed at all times!
More

All Points 68-1256 9.3 RPM...

$257.50
WebstaurantStore All Points 68-1256 9.3 RPM Gear Drive Motor - 115V
No Shipping Info
/all-points-681256-93/CiB4TIRYsRb59cnYBnCwzQ==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1256 gear drive motor operates at 9.3 RPM and will replace the burnt-out or malfunctioning one in selected commercial toasters. 68-1256 From All Points
More

All Points 68-1248 4.8 RPM...

$215.02
WebstaurantStore All Points 68-1248 4.8 RPM Gear Drive Motor - 208/230V
No Shipping Info
/all-points-681248-48/JLJjXhuVSX-azuU0leuOrw==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1248 4.8 RPM gear drive motor replaces the burnt-out or malfunctioning one in selected commercial toasters. 68-1248 From All Points
More

All Points 68-1106 12.6 RPM...

$173.81
WebstaurantStore All Points 68-1106 12.6 RPM Gear Drive Motor - 208/230V
No Shipping Info
/all-points-681106-126/M5cpU-nc8MeVy6w8498o-Q==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1106 12.6 RPM gear drive motor replaces the damaged or malfunctioning one in compatible commercial toasters and ovens. 68-1106 From All Points
More

MARATHON MOTORS 5K36PN30...

$353.70
Zoro MARATHON MOTORS 5K36PN30 Motor, 3Ph, 1/3 HP, 1140 RPM, 208230/460V
Free Shipping
/marathon-motors-5k36pn30/5a5a-rIo1xAtZy9eaPaAQQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
General Purpose Motor, 3Phase, Totally Enclosed FanCooled, 1/3 HP, Nameplate RPM 1140, 56 Frame, Voltage 208230/460, 60 Hz, 3 Phase, 1.71.8/0.90 Full Load Amps, Number of Speeds 1, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal, Motor Thermal Protection None, Insulation Class B, 1.35 Service Factor, Ball Bearings, Frame Material Rolled Steel, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Overall Length 113/8 In., Motor Shaft Design Keyed
More

Milwaukee Diamond Core Drill...

$749.45
Ohio Power Tool Milwaukee Diamond Core Drill Motor 450/900 RPM, 20 Amp with Clutch 4096
No Shipping Info
/milwaukee-diamond-core/OchjuY-MbDSjWtbYA1HEzg==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 rpm or 900 rpm operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.
More

All Points 68-1194 Conveyor...

$1,346.10
WebstaurantStore All Points 68-1194 Conveyor Oven Gear Motor; 90V DC; 4.2 Output RPM; 5/8 Shaft
No Shipping Info
/all-points-681194/e7iYSc4GOdaSfqqB1QpG8w==/info
WebstaurantStor e
IN_STOCK ( In stock )
This All Points 68-1194 gear motor controls the gear and drive system on select ovens. Replace a broken gear motor to ensure your unit's conveyor belt operates properly and keeps product moving at the desired speed. 68-1194 From All Points
More

MARATHON MOTORS 5K37NN30...

$351.23
Zoro MARATHON MOTORS 5K37NN30 Motor, 3Ph, 3/4 HP, 3450 RPM, 208230/460V
Free Shipping
/marathon-motors-5k37nn30/dzd-i-DPXsJB4FszHmHi1w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
General Purpose Motor, 3Phase, Totally Enclosed FanCooled, 3/4 HP, Nameplate RPM 3450, 56 Frame, Voltage 208230/460, 60 Hz, 3 Phase, 2.62.5/1.3 Full Load Amps, Number of Speeds 1, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal, Motor Thermal Protection None, Insulation Class B, 1.25 Service Factor, Ball Bearings, Frame Material Rolled Steel, Max. Ambient Temp. 40 Degrees C, CW/CCW Motor Shaft Rotation, Overall Length 113/4 In., Motor Shaft Design Keyed
More

Milwaukee Magnetic Drill...

$574.99
CPO Milwaukee Milwaukee Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck 4262-1
Free Shipping
/milwaukee-magnetic-drill/LEJOWi-dh-lhDV7TrfDntQ==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck - 4262-1. Product Manual. 3/4 in. capacity, 11.5 amp motor, 350 RPM. Dual mount gear case, reverse mount for tight quarter drilling. Taps up to 1-in-14 threaded hole. Develops up to 1,670 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

30rpm Square Geared Gearhead...

$27.50
eBay 30rpm Square Geared Gearhead Dc Motor High Torque Output Heavy Duty 12v Dc
Free Shipping
/30rpm-square-geared/ylvJzwlDiXqXZEoCXzee2Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
30RPM Square Geared Gearhead DC Motor High Torque Output Heavy Duty 12V DC Description Specification: ♦Operating voltage:12VDC ♦No load speed: 30 RPM ♦Load speed: 24 RPM ♦Torque: 2.2kg.cm ♦Weight: 0.18kg Package Included: 1x DC12V Square Geared Gearhead Other Items Geared Gearhead Motor 12V 0.6RPM 12V 2RPM 12V 6RPM 12V 10RPM 12V 30RPM 12V 230RPM 12V 688RPM 12V 868RPM More items Payment Details 1.We only accepte Paypal: 2.Payment should be sent within 7 (SEVEN) days of auction closing.
More

Milwaukee Diamond Core Drill...

$749.45
Ohio Power Tool Milwaukee Diamond Core Drill Motor, 300/600 RPM, 20 Amp with Clutch 4004
No Shipping Info
/milwaukee-diamond-core/p5XqSM5r-BaTcGGJCvi9kA==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 in. to 14 in. in diameter.
More

DAYTON 3XA82 DC Gearmotor, 30...

$501.32
Walmart.com DAYTON 3XA82 DC Gearmotor, 30 rpm, 90V, TENV
Free Shipping
/dayton-3xa82-dc/77jhI2v_e3sEv1P-qifIig==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
DC Gearmotor, Voltage 90VDC, Nameplate RPM 30, Max. Torque 94 in.-lb., Overhung Load 175 lb., Input HP 1/8, Gear Ratio 60:1, Full Load Amps 1.28, Insulation Class F, TENV Enclosure, None Thermal Protection, All Position Mounting, Motor Type Permanent Magnet DC, Powder Coated Gloss Black Finish, Replacement Brushes 6YHY6 Features Voltage Rating : 90VDC Thermal Protection : None Seals : Lip Type on Input and Output Shaft Mounting : All Position Gear Case : Die Cast Aluminum Ambient (C) : 40 Brushes : Externally Replaceable Full Load Amps : 1.28 Full Load Torque (In.-Lbs.) : 94 Nameplate RPM : 30 Overhung Load (Lb.) : 175 Enclosure : TENV Gear Ratio : 60:1 Input HP : 1/8 Phase : DC Shaft Orientation : Right Angle Item : DC Gearmotor Gears : Worm, Hardened Steel and Output Gear Bronze Alloy... Less
More

Milwaukee 4262-1 Magnetic...

$574.99
CPO Outlets Milwaukee 4262-1 Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck
Free Shipping
/milwaukee-42621-magnetic/KG4MAL0EppF23f982xF-vQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck - 4262-1. Product Manual. 3/4 in. capacity, 11.5 amp motor, 350 RPM. Dual mount gear case, reverse mount for tight quarter drilling. Taps up to 1-in-14 threaded hole. Develops up to 1,670 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

Dewalt DWE4559CN 9 in. 6,500...

$189.99
CPO DEWALT Dewalt DWE4559CN 9 in. 6,500 RPM 4.7 HP Grinder with Rubber Gear Case Cover
+ $6.99 shipping
/dewalt-dwe4559cn-9-in/ypv6Batmfm36Esf6EjFxCg==/info
CPO DEWALT
IN_STOCK ( In stock )
Store not rated
9 in. 6,500 RPM 4.7 HP Grinder with Rubber Gear Case Cover - DWE4559CN. 9 in. Guard. Rubber Gear Case Cover. High power 4.7 HP 6,500 RPM motor with overload protection provides higher operating speeds under load. Gear Case Grip for pipeliners allow gear case to be gripped as a handle. Dust Ejection System protects the motor from damaging particles entering air intake that would otherwise abrade the motor and increases brush life. Anti-Vibe trigger handle reduces user fatigue caused by vibration. Lightweight design minimizes user fatigue at less than 13.5 lbs.. Toughcord system reduces cord pull outs and increases cord life. Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage. Low profile gear case allows for work in tight areas. 6,500 RPM... Less
More

WEG 03018ET3ECT286TW 22 CT...

$3,534.91
Zoro WEG 03018ET3ECT286TW 22 CT Motor, 30 HP, 1765 RPM, 208230/460 V
Free Shipping
/weg-03018et3ect286tw22-ct/KX7e776rwGC-mELQDNfhAw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Cooling Tower Motor, 3Phase, Totally Enclosed FanCooled, 30 HP, 1765 Nameplate RPM, 286T Frame, CW/CCW Motor Shaft Rotation, 208230/460 Voltage, 77.670.2/35.1 Full Load Amps, 3 Phase, 60/50 Hz, Rigid Base Motor Mounting Type, Motor Mounting Position All Angle, Bearings Ball, Frame Material Cast Iron, None Thermal Protection, 1.25 Service Factor, Ambient Temperature 40 Degrees C, Shaft Dia. 17/8 In., Shaft Length 45/8 In., Length Less Shaft 235/16 In., Overall Length 28 In.
More

Century 390, 5 Split...

$143.95
Global Industrial Century 390, 5 Split Capacitor Motor - 1050 Rpm 115 Volts
No Shipping Info
/century-390-5-split/U8kHkj1P4AzY-7p_b3Mj5Q==/info
Global Industrial
IN_STOCK ( In stock )
Century 5 Split Capacitor Motor - 1050 RPM 115 Volts Permanent Split CapacitorSleeve BearingAutomatic Overload60 HZ42 FrameSingle PhaseRotation is determined by viewing the shaft end 13.00 L. 7.00 W. 7.00 H.
More

Milwaukee 4096 Diamond Coring...

$764.71
Toolup.com Milwaukee 4096 Diamond Coring Motor 450/900 RPM, 20 Amp with Clutch, power-tools
Free Shipping
/milwaukee-4096-diamond/zkicLZYrRKmPj5Po1UihVw==/info
Toolup.com
IN_STOCK ( In stock )
Free Shipping
Milwaukee 4096 Specifications: Voltage: 120V Amps: 20.0 No Load Speed: 450/900 RPM Motor Protection: Clutch Spindle: 1-1/4 - 7 Max. HP: 4.8 Plug Type: L5-20P Milwaukee 4096 Includes: Built-In Water Swivel Water Hose Adapter Water Control Valve Open End Wrench Milwaukee 4096 Features: Two speeds: 450 and 900 rpm Clutch protection protects gears and motor Built-in water swivel Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete
More

DAYTON 3M546 HVAC Motor, 1/30...

$50.88
Walmart.com DAYTON 3M546 HVAC Motor, 1/30 HP, 1550 rpm, 115V, 3.3
Free Shipping
/dayton-3m546-hvac-motor/wXBExR_fECqnWzD_nEkf6Q==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
long_description Features Body Dia. (In.) : 3.3 Full Load Amps : 1.1 Length Less Shaft (In.) : 3-5/16 Nameplate RPM : 1550 Number of Speeds : 1 Thermal Protection : Auto Ambient (C) : 40 Enclosure : Open Air-Over Hz : 60 NEMA/IEC Frame : Nonstandard Service Factor : 1.0 Motor Type : Shaded Pole HP : 1/30 Voltage : 115 Mounting : Stud Rotation : CWSE Bearings : Sleeve Insulation Class : B Phase : 1 Shaft Length (In.) : 2 Shaft Dia. (In.) : 5/16 Duty : Continuous Type : OEM Replacement Stud/Base Mtg. Pattern (In.) : 2 x 2 Stud Location : 4/BE Item : HVAC Motor Mounting Pattern : 2 RPM Range : 1501-1600 Shaft Length : 2 Frame : 3.3 Body Dia. : 3.3 Shaft Dia. : 5/16 Length Less Shaft : 3-5/16 Max. Ambient Temp. : 40 Degrees C Stud/Base Mtg. Pattern : 2 x 2 Motor Application : HVAC/R Motor Sub... Less
More

Milwaukee Magnetic Drill...

$319.99
CPO Milwaukee Milwaukee Magnetic Drill Press Motor, 600 RPM with 1/2 in. Chuck 4253-1
Free Shipping
/milwaukee-magnetic-drill/gzzQAI1QReE854TMTPTOWA==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 600 RPM with 1/2 in. Chuck - 4253-1. Product Manual. 1/2 in. capacity, 6.2 amp motor, 600 RPM. 1/2 in. keyed chuck. Taps up to 5/8 in.-18 threaded hole - 5/8 in.-11 and 1/2 in.-13 taps not recommended. Develops up to 1,650 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

Leeson Reversible Electric...

$339.99
Northern Tool Leeson Reversible Electric Motor - 1 HP, 1725 RPM, Model 110004
+ $20.49 shipping
/leeson-reversible/2cgde2JdJzbBC4yg0prjbA==/info
Northern Tool
IN_STOCK ( In stock )
This Leeson reversible 1 HP single phase general purpose motor has 115/208-230 Volts and 1725 RPM. For use where water and dust exposure is minimal. Ideally suited for use on pumps, compressors, blowers, fans and other standard industrial applications. U.S.A. Rigid Base Yes, Rated RPM 1,725, Volts 115/208-230, HP 1, Shank Diameter in. 5/8, Capacitor Start Yes, Shank Length in. 1 7/8, Reversible Yes, Motor Phases Single, Frame Type NEMA 56. Durable rolled steel construction NEMA design B performance Exceeds NEMA service factors - 1.15 Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified. Model Number: 110004
More

Milwaukee Diamond Core Drill...

$749.45
Ohio Power Tool Milwaukee Diamond Core Drill Motor, 300/600 RPM, 20 Amp with Shear Pin 4079
No Shipping Info
/milwaukee-diamond-core/agPjw60MQe9G24olFKRCzw==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 in. to 14 in. in diameter.
More

Milwaukee 4253-1 Magnetic...

$319.99
CPO Outlets Milwaukee 4253-1 Magnetic Drill Press Motor, 600 RPM with 1/2 in. Chuck
Free Shipping
/milwaukee-42531-magnetic/veFvkLLMcsagj9-0gKP6hg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 600 RPM with 1/2 in. Chuck - 4253-1. Product Manual. 1/2 in. capacity, 6.2 amp motor, 600 RPM. 1/2 in. keyed chuck. Taps up to 5/8 in.-18 threaded hole - 5/8 in.-11 and 1/2 in.-13 taps not recommended. Develops up to 1,650 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

DAYTON 5LAE9 DC Gearmotor,...

$434.92
Walmart.com DAYTON 5LAE9 DC Gearmotor, RPM 30, 90 VDC
Free Shipping
/dayton-5lae9-dc/Eilci_08cA_ZOicJbgsrog==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
DC Gearmotor, Voltage 90VDC, Single Shaft, Nameplate RPM 30, Max. Torque 266.0 in.-lb., Overhung Load 175 lb., Input HP 1/8, Gear Ratio 60:1, Full Load Amps 1.72, Insulation Class F, TENV Enclosure, None Thermal Protection, All Position Mounting, Motor Type Permanent Magnet, Matt Black Finish Features Approved : UL Recognized Voltage Rating : 90VDC Thermal Protection : None Seals : Lip Mounting : All Position Gear Case : Die Cast Zinc Ambient (C) : 40 Brushes : Replaceable Externally Finish : Matt Black Full Load Amps : 1.72 Full Load Torque (In.-Lbs.) : 266 Nameplate RPM : 30 Overhung Load (Lb.) : 175 Capacitor Required : No Enclosure : TENV Gear Ratio : 60:1 Input HP : 1/8 Motor Type : Permanent Magnet Length Less Shaft (In.) : 11-3/4 Phase : DC Rotation : Reversible Shaft Orientation :... Less
More

DAYTON 20HN82 HVAC Motor,...

$68.48
Zoro DAYTON 20HN82 HVAC Motor, 1/30 HP, 1550 rpm, 120V, 3.3
Free Shipping
/dayton-20hn82-hvac-motor/MQ5rRDQ6dUj96bObwJq_7g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
HVAC Motor, PSC, Totally Enclosed AirOver, Continuous, 1/30 HP, 1550 Nameplate RPM, 120 Voltage, 3.3 Frame, Service Factor 1.0, Full Load Amps 0.44, 60 Hz, Motor Shaft Rotation CW/CCW, Insulation Class B, Max. Ambient Temp. 40 Degrees C, Number of Speeds 1, Motor Mounting Type Stud, Ball Bearings, Motor Thermal Protection Auto, Body Dia. 3.3 In., Shaft Dia. 1/4 In., Shaft Length 11/2 In., 3 In., 4/BE, 2 x 2 In., 1, Flat, Capacitor, UL E37403, CSA 244617, 2
More

Milwaukee Diamond Core Drill...

$749.45
Ohio Power Tool Milwaukee Diamond Core Drill Motor, 600/1200 RPM, 20 Amp with Clutch 4005
No Shipping Info
/milwaukee-diamond-core/svNkDOgXJRUeYjvvdfGHBQ==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 600 rpm or 1200 rpm operating speed. The 4005 has a clutch to protect gears and motor against overload. This unit will handle core bits from 3/4 in. to 4 in. in diameter.
More

Milwaukee Diamond Core Drill...

$725.00
Ohio Power Tool Milwaukee Diamond Core Drill Motor 500/1000 RPM, 15 Amp with Clutch 4097-20
No Shipping Info
/milwaukee-diamond-core/iTQA-aAQz6Kq5Ui48LUlhA==/info
Ohio Power Tool
IN_STOCK ( In stock )
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 500 rpm or 1000 rpm operating speed. The 4097-20 uses a clutch to protect gears and motor against overload. This unit will handle core bits from1 1/4 in. to 5 in diameter.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355