MFX2

The ultimate in GPS protection. This skin surrounds your GPS and protects against drops. The skin has custom cutouts for your power, on/off, speaker and mounting bracket.

We have combined a custom cradle with our Nuvi ball handlebar mount to create this sleek combo for your motorcycle. No need to use the cradle from your windshield mount. We provide what you need right here. The cradle provided is exactly like what Garmin put in the box so you can also use it to connect to your window suction mount if you need another cradle. These mounts fit handlebar diameters up to one inch. We include a rubber fitting for smaller handlebars at no additional charge. We also include a hardwire power adapter that will fit the back of your GPS.

Charge your GPS at home before that long trip. These charge your GPS rapidly and will fit the USB port just like the car charger. The cable length is a bit over four feet long.

All you need to to do is loosen the bolt on your passenger seat and fasten the bracket. This mount uses the cradle that came with your Nuvi. We provide a ball connection that fits directly into the back of the cradle socket. The mount length is 15 inches from floor to cradle. Included are car seat and car floor direct attachments.

It's a mount, no it's a charger! Actually it's both! No power cable needed with our lighter mount! This uses the cradle that came with your GPS. Life may not get any better than this really cool mount.

We have combined a custom cradle with our Nuvi ball handlebar mount to create this sleek combo for your motorcycle. No need to use the cradle from your windshield mount. We provide what you need right here. The cradle provided is exactly like what Garmin put in the box so you can also use it to connect to your window suction mount if you need another cradle. These mounts fit handlebar diameters up to one inch. We include a rubber fitting for smaller handlebars at no additional charge. We also include a hardwire power adapter that will fit the back of your GPS.

What a great mount! Unlike many other solutions that do not provide a cradle, this is manufactured specifically for your Garmin Nuvi. This includes a custom cradle to surround your GPS. All ports and buttons are fully accessible. The included air vent mount keeps your GPS at perfect eye level yet away from the view of potential bad guys when parking your car.

This mounting kit includes a suction mount, custom cradle and charger that will plug into your mini USB port on the GPS.

Perfect for the new GPS owner. This includes a carry case, vent mount and an extra USB car charger. These fit all Nuvi models. The vent mount will use the cradle that came with your GPS.

Ideal for those that just need a cradle Fits just like the one you received with your GPS Socket on the back to fit the standard Garmin Nuvi 17mm ball mounts

A custom fit for your existing cradle Fits up to one inch handlebars with rubber inserts for smaller bars This includes a cable with the flat ending (not the mini USB) Hardwire pgtail ending for direct connections

Excellent value on a heavy duty handlebar mount that fits handlebars up to 1.25 inches. We even include rubber strips so that this mount can be used for much smaller handlebars. Easily removed. We include a hardwire power adapter that will plug directly into your GPS.

Nuvi Cigarette Car Charger Do you run out of battery power when you need your Nuvi 200w PDA the most? Dont run out of battery on your Nuvi 200w simply use this in car cigarette charger in your vehicle cigarette lighter socket. With this Nuvi 200w Cigarette PDA Car Charger Cable youll never run out of power while on the road. The slim and stylish car lighter adapter fits cigarette lighters in both foreign and domestic vehicles. Charge and use your Nuvi 200w Handheld at the same time. Special circuitry design protects your unit from overcharging and short- circuiting. The Nuvi 200w car charger comes with a fully retractable coiled cord. Charge your Nuvi 200w in your vehicle on the way to work. Or charge it on the way home. Or while you're driving to the airport or to a meeting. Anywhere you... Less

Unlike many other solutions that use a universal cradle, this is manufactured specifically for your GPS. This includes a custom battery cover cradle to fit your your GPS. All ports and buttons are fully accessible. The suction cup is almost 3 inches wide and includes a ratchet point to adjust the angle. The mount has the ability to swivel and tilt.

What a great mount! Unlike many other vent solutions that use universal cradles, this includes a cradle that is manufactured specifically for your Magellan. Fits right onto the back of the GPS and permits full access to all ports and buttons.

Nuvi Cigarette Car Charger Do you run out of battery power when you need your Nuvi 200w PDA the most? Dont run out of battery on your Nuvi 200w simply use this in car cigarette charger in your vehicle cigarette lighter socket. With this Nuvi 200w Cigarette PDA Car Charger Cable youll never run out of power while on the road. The slim and stylish car lighter adapter fits cigarette lighters in both foreign and domestic vehicles. Charge and use your Nuvi 200w Handheld at the same time. Special circuitry design protects your unit from overcharging and short- circuiting. The Nuvi 200w car charger comes with a fully retractable coiled cord. Charge your Nuvi 200w in your vehicle on the way to work. Or charge it on the way home. Or while you're driving to the airport or to a meeting. Anywhere you... Less

External antenna just is not quite long enough? This extension cable will give you an extra 3 meters (that's almost 10 feet). Just plug your antenna into the female end and the other end has the MCX connection for your GPS. This works with all antennas with an MCX male connection (most Garmin and TomTom antennas use this, but please make sure prior to ordering). These are very similar to Garmin Part 010-10157-00.

Like to ride in the rain, but your GPS doesn't? No problem! This waterproof bike combo will keep your GPS dry. The mount fits handlebars from .75 to 1.5 inches in diameter. The case measures 5.5 x 3.5 x 1.7 internally. This means all 4.3 inch and 3.5 inch GPS units (that's 98% of the GPS market) will fit fine. The case is zipper shut and maintains a weatherproof seal. The lens permits human touch which means that your touch screen device will work fine when inside the case. Included are a set of foam inserts to help cushion smaller GPS units and get them snug against the film so it doesn't move around. The case and the mount are easily removed. The mount is attached using a heavy duty adjustable thumbscrew attachment.

This mount features a seven inch flexible gooseneck with a notch for the belt tab. The suction cup features an airlock that ensures a stable mount. The arm is flexible so you can gain the optimal position. The suction will adhere to anything smooth or flat (fiberglass, glass, plastic, etc). These use the belt clip tab on the back of your Golf Buddy Voice. These only fit the Golf Buddy Voice.

You just purchased a golf GPS. Where do you put it? The golf cart's cup holder of course! You will love this mount! The popular Cup Holder Mount is about 5 tall. It features an adjustable flywheel base that expands to fit varying cup holder opening except for those that are so large that the 7-Eleven Big Gulp falls over.

Fantastic mount for your GPS Have grouped a custom cradle with a handlebar mount that fits bars up to 1 creep diameter Includes strips so that this mount can be used for greatly smaller handlebars Permits full access to all ports Allows tilt and angle adjustment