ford 351 water pump

Billet Aluminum Ford Small Block Water Pump Pulley V-Belt (4 Bolt Damper) 1 Groove Water Pump Pulley for 302, 351W, 351C or 351M. 5.4 Diameter for high water flow applications Taller Pulley for Power Steering Applications. Use the shorter SBFL1WP-AHF or SBFL1WP-A for alternator only applications Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4

Billet Aluminum Ford Small Block Water Pump Pulley V-Belt (4 Bolt Damper) 2 Groove Water Pump Pulley for 302, 351W, 351C or 351M.5.4 Diameter for high water flow applications (over-drive) Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4

Milodon Performance Aluminum High Volume Water Pump for Ford 351C has a standard rotation, and is made from aluminum, a high volume model for 351C engines. Fits Mustang 1970-73, Fairlane 1970, Torino 1971-76, Bronco 1978-82, Trucks 1977-82. Uses a 5/8 inch shaft pilot, 1 3/4 inch inlet and has a 5 11/16 inch hub height.

Billet Aluminum Ford Small Block Water Pump Pulley V-Belt (4 Bolt Damper) 1 Groove Water Pump Pulley for 302, 351W, 351C or 351M.6.2 Diameter for Increased Horsepower (underdrive) Taller Pulley for Power Steering Applications. Use the shorter SBFL1WP-A for alternator only applications Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4

Billet Aluminum Ford Small Block Water Pump Pulley - V-Belt (4 Bolt)3 Groove Water Pump Pulley for 289, 302 & 351W.5.4 Diameter for Increased Cooling Flow.Application - Late Model Engines Transplanted into: Ford Passenger cars 1964-1969Ford Trucks 1964-1976Fits vehicles with:1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Passenger side lower radiator hose. 3) Dampener face to water pump flange face 3.0

Milodon Performance Aluminum Standard Volume Water Pump for Ford 351C has a standard rotation, and is made from aluminum, a standard volume model for 351C engines. Fits Mustang 1970-73, Fairlane 1970, Torino 1971-76, Bronco 1978-82, Trucks 1977-82. Uses a 5/8 inch shaft pilot, 1 3/4 inch inlet and has a 5 11/16 inch hub height.

Please hover mouse to enlarge image Fel-Pro Water Pump Gasket Paper Ford 255 302 351W Each Gasket Material Paper Notes Pump to plate gasket. Quantity Sold individually. Summit Racing Part Number : FEL-35241 Fitment P lease see the Compatibility link at the top of the listing. Fitment information may not be available for all products. IMPORTANT - Please be sure to view the Notes option for more details if it is available. Please use the Ask Seller a Question link for fitment questions, and

Billet Aluminum Ford Small Block Water Pump Pulley - V-Belt (3 Bolt Damper) 1 Groove Water Pump Pulley for 289, 302 or 351W. Short Water Pump Pulley Designed for Alternator Only Applications5.4 Diameter for Increased Cooling Flow (Overdrive). Application: Ford Passenger cars 1964 - 1969Ford Trucks 1964 - 1976Fits vehicles with: 1) Factory 3 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Passenger side lower radiator hose. 3) Dampener face to water pump flange face 3 7/8

Ford Small Block V-Belt Water Pump Pulley (4 Bolt Crank) for 302, 351W and 351C engines. These underdrive pulleys are designed to fit 1965 - 1969 Ford Passenger cars 1965 - 1977 Ford Pick-up Trucks with transplanted 1969 1/2+ engine. Requires 4 bolt crank and passenger side lower radiator hose. Dampener face to water pump flange face 3 1/4. (Does not Fit Ford Racing Short Water Pump) Pulley diameter is 6.2 with .625 pilot diameter.

Billet Aluminum Ford Small Block Water Pump Pulley V-Belt (4 Bolt Damper) 1 Groove Water Pump Pulley for 302, 351W, 351C or 351M.6.2 Diameter for Increased Horsepower (underdrive) Shorter Pulley for Alternator Only Applications. Use the taller SBFL1WP for power steering applications Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4

Billet Aluminum Ford Small Block Water Pump Pulley - V-Belt (4 Bolt) 2 Groove Water Pump Pulley for 289, 302 & 351W. Application - Late Model Engines Transplanted into: Ford Passenger cars 1964-1969Ford Trucks 1964-1976Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Passenger side lower radiator hose. 3) Dampener face to water pump flange face 3.0

Billet Aluminum Ford Small Block Water Pump Pulley - V-Belt (4 Bolt) 1 Groove Water Pump Pulley for 289, 302 & 351W. Application - Late Model Engines Transplanted into: Ford Passenger cars 1964-1969Ford Trucks 1964-1976Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Passenger side lower radiator hose. 3) Dampener face to water pump flange face 3.0

Milodon Performance Aluminum Standard Volume Water Pump for Ford 302, 351W has a standard rotation and is made from aluminum, a standard volume model for 302 and 351W engines. Fits Mustang 1970-73, Fairlane 1970, Torino 1970-74, Granada 1975-81, Gran Torino 1972-76, Bronco 1980-87, F-100 Truck 1967-77 302 and 1980-83 302, F-150 and F-250 Trucks 1973-86 302 and 1980-87 351W . Uses a 5/8 inch shaft pilot, 1 3/4 inch inlet and has a 5 13/16 inch hub height.

Billet Aluminum Ford Small Block Water Pump Pulley - V-Belt (3 Bolt Damper) 2 Groove Water Pump Pulley for 289, 302 or 351W.6.2 Diameter for Increased Horsepower (Underdrive). Application: Ford Passenger cars 1964 - 1969Ford Trucks 1964 - 1976Fits vehicles with: 1) Factory 3 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Passenger side lower radiator hose. 3) Dampener face to water pump flange face 3 7/8

Milodon Performance Aluminum High Volume Water Pump for Ford 302, 351W has a standard rotation, aluminum high volume model for 302 and 351W engines. Fits Mustang 1970-73, Fairlane 1970, Torino 1970-74, Granada 1975-81, Gran Torino 1972-76, Bronco 1980-87, F-100 Truck 1967-77 302 and 1980-83 302, F-150 and F-250 Trucks 1973-86 302 and 1980-87 351W . Uses a 5/8 inch shaft pilot, 1 3/4inch inlet and has a 5 13/16 inch hub height.

Ford Racing Short Water Pump Pulley - 1V 1 Groove Water Pump Pulley for 289, 302 & 351W. Application: This pulley is designed for use with Ford Racing's Short Water pump part number M-8501-E351S. Our pulleys are designed based on the now obsolete Street Rod Pulleys (part number M-8509-R and M-8509-Q). Designed for use with factory alternator and power steering brackets or CVF Racing Brackets.

Milodon Performance Aluminum High Volume Water Pump for Ford 302, 351W has a reverse rotation, and is made from aluminum, a high volume model for 302 and 351W engines. Fits Mustang 1979-85. Uses a 5/8 inch shaft pilot, 1 3/4 inch inlet and has a 5 13/16 inch hub height.

SquareTrade AP6.0 This auction is for a Ford OHO (Off Highway Operation) Newsletters Manual. It is an aftermarket book that consolidated all the Ford OHO and Racing Newsletters This has all the early 1970's Ford available including Induction Systems, Cross Boss Intake and Carbs, 351C Aluminum Intakes, Racing Rods, Aluminum Water Pumps and much more. These are all date 1971 1972 1973 era and cover anything from 1600cc Pinto engines through Ford 302, 351C, 429/460, 351W, Boss 302 and 428CJ engine

Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt)3 Groove Crankshaft Pulley, 3 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 289, 302 & 351W.Application - Late Model Engines Transplanted into: Ford Passenger cars 1964-1969Ford Trucks 1964-1976Fits vehicles with:1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Passenger side lower radiator hose. 3) Dampener face to water pump flange face 3.0

Pump requires 5 HP engine with 2 7/16in.L, 3/4in. straight keyed shaft, 5/16in.-24 tapped hole and 3 5/8in. bolt circle. Uses long-lasting, high-end silicon carbide seals that are specially suited ...

Milodon Performance Aluminum Standard Volume Water Pump for Ford 289, 302, 351W has a standard rotation and is made from aluminum, a standard volume model for 289, 302, 351W engines. Fits Mustang 1965-69 except 67 Hi Perf, Fairlane 1965-69, Torino 1968-69, Falcon 1965-69 and Bronco 1965-77. Uses a 5/8 inch shaft pilot, 1 3/4 inch inlet and has a 5 1/2 inch hub height.

Milodon Performance Aluminum High Volume Water Pump for Ford 289, 302, 351W has a standard rotation, aluminum high volume model for 289, 302, 351W engines. Fits Mustang 1965-69 except 67 Hi Perf, Fairlane 1965-69, Torino 1968-69, Falcon 1965-69 and Bronco 1965-77. Uses a 5/8 inch shaft pilot, 1 ¾ inch inlet and has a 5 ½ inch hub height.

Billet Aluminum Ford Small Block V-Belt Pulley Kit (4 Bolt) 1 Groove Crankshaft Pulley, 1 Groove Water Pump Pulley and 1 Groove Alternator Pulley for 302, 351W, 351C or 351M. Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4Note: This kit will not work with CVF Racing Alternator Bracket. If you are planning to use a CVF Racing alternator bracket use SBFS1WP, SBFS1CR and SBF1ALT. This is because there are two mounting locations for the Ford Alternator depending on what accessories you are running. Our brackets are designed for the Power Steering location which is closer to the engine... Less

Milodon Performance Aluminum High Volume Water Pump for Ford 289, 302, 351W has a standard rotation, aluminum high volume model for 289, 302, 351W engines. Fits Mustang 1965-69 except 67 Hi Perf, Fairlane 1965-69, Torino 1968-69, Falcon 1965-69 and Bronco 1965-77. Uses a 5/8 inch shaft pilot, 1 ¾ inch inlet and has a 5 ½ inch hub height.

EXTREME SERIES HIGH VOLUME MECHANICAL FUEL PUMP FOR FORD 351C 351M 400 ENGINES. This fuel pump is the ideal size for most street/strip applications. It is what we recommend with most of the engine buildups we sell . Fits FORD 351C 351M 400 engines requiring a mechanical fuel pump. This fuel pump has 1/4 NTP inlets and outlet. High Output Fuel Flow Shutoff Pressure Pre-set 8.0 PSI Fuel Pressure Regulator is Not Required, but recommended. Heavy Duty Construction For Continuous High RPM Operation

Billet Aluminum Ford Small Block Crankshaft V-Belt Pulley (4 Bolt) 1 Groove Crankshaft Pulley for 302, 351W, 351C or 351M. Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Factory 4 bolt damper (Aftermarket dampers may require 0.950 spacer)2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4

Billet Aluminum Small Block Ford Pulley Kit (4 Bolt Crank) (2V Water Pump and 3V Crank) Ford Small Block V Belt Pulley kit for 302, 351C, 351W or 351M engines 1969 1/2 and later (4 bolt crank). This kit will for result in underdrive pulley ratio of 88%. Designed for use with stock alternator and power steering brackets. Application 1) Ford Passenger cars 1969 1/2+ Fits vehicles with: 1) Factory 4 bolt fluid dampener (aftermarket dampeners will require a spacer) 2) Driver's side lower radiator hose. 3) Dampener face to water pump flange face 3 1/4 Ford Pulley Kit Contents: Water Pump Pulley P/N SBFL2WP Grooves: 2 Pulley Diameter: 6.2 Pilot Diameter: 0.625 Crankshaft Pulley: P/N SBFL3CR Grooves: 3 Crank Pulley Diameter: 5.4 Crank Pulley Bolt Pattern: 4 Bolt Alternator Pulley: P/N SBF1ALT... Less

Billet Aluminum Ford Small Block Crankshaft Pulley Spacer (4 Bolt) Crankshaft Pulley for 302, 351W, 351C or 351M. Application: Ford Passenger cars 1969 1/2Ford Trucks 1977+Fits vehicles with: 1) Aftermarket 4 bolt damper2) Water Pump with Driver's side lower radiator hose. 3) Dampener face to water pump flange face 4 1/4Use this .950 thick spacer with SBFL series pulleys and the following dampers: 1) Ford Racing Damper2) Summit Racing Damper3) Professional Products Dampers4) Trick Flow Specialties Dampers5) ATI Performance ProductsNote: Fluidampr balancer requires .625 spacer, OEM 4 bolt damper does not require a spacer