Clamps and Vises

Product Information: Fluke 321 Compact Clamp On Meter is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. Such big features in a small package.Fluke Clamp Meter includes: (2) AAA Alkaline batteries, Instruction card, Safety information sheet, Soft carrying case, Test leads.Additional Information: Manufacturer Specification Sheet (PDF File) Features:#149; Clamp Meter includes: (2) AAA Alkaline batteries, Instruction card, Safety information sheet, Soft carrying case, Test leads#149; New smaller size fits easily into tight places#149; Precise measurements with 1.8#37; basic accuracy#149;... Less

AC Clamp On Current Probe, Amps AC 1 to 400A, AC Frequency Response 5 Hz to 20 kHzJaw Capacity 1-1/4 In. (32mm), Max. Conductor Size 750 MCM, Connector Type Sheathed Banana Plugs, For Use With Digital Multimeter, Output 1mA/A, Accuracy 2 Percent + 0.06 A, (45 to 400 Hz), Safety Rating CAT IV 600 V, CAT III 1000 V, Includes Instructions, Manufacturers Warranty Length 1 yr.

Product Information: Fluke 771 Milliamp Process Clamp On Meter with Non-Contact mA Loop can measure mA signals without breaking the loop. The popular Fluke 771 mA Clamp Meter saves time by making fast, accurate measurements on 4-20 mA signal loops without breaking the circuit. If you are spending time taking mA measurements by removing a wire and breaking the loop, calling the control room to isolate a loop, testing analog input/output on a console, troubleshooting devices with mA inputs and outputs, repairing intermittent or erratic 4-20 mA loops, going back to the shop to get extra tools then you need to take a good look at the Fluke 771 mA Clamp Meter. ItGÖs designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops... Less

Clamp On Ammeter, Ac Response Trms, 600 Max. Ac Amps, 600 Max. Dc Amps, 600 Max. Ac Volts, 600 Max. Dc Volts, 6000 Max. Ohms, Jaw Capacity 1-1/3 In., Battery Type Aa, Safety Rating Cat Iv 600v, Cat Iii 1000v, Calibration Certificate Nist, Audible Continuity Yesfrequency Counter 5 To 500 Hzpeak Hold Yesdisplay Backlit Lcdcounts 6000, Calibration Frequency 10 To 500 Hz, Auto Ranging Yes, Data Hold Yesincludes Soft Carrying Case, Test Leads, (2) Batteries, Instructions

Digital Clamp On Ammeter, AC Response TRMS, 400 Max. AC Amps600 Max. AC Volts, 600 Max. DC Volts, 4000 Max. Ohms, Jaw Capacity 1-1/8, 1-5/16 In., Battery Type AAA, Safety Rating CAT IV 300V, CAT III 600VAudible Continuity YesCapacitance 1000uFPeak Hold YesDisplay Backlit LCD, Temp. Range 14 Degrees to 752 Degrees F (-10 Degrees to 400 Degrees C), Counts 6000Auto Ranging Yes, Data Hold Yes

AC Clamp On Current Probe, Amps AC 10mA to 6A, AC Frequency Response 40 Hz to 5 kHzJaw Capacity 0.59 In. (15mm), Max. Conductor Size 1/2 In., Connector Type BNC, For Use With Mfr. No. Fluke-434, FLUKE-435, Output 400mV/A, Accuracy 48 Hz to 65 Hz, 10mA to 1A, +/-1 Percent + 5mA, 1A to 5A +/-1 Percent, Safety Rating CAT III 600 V, Includes Instructions, Manufacturers Warranty Length 1 yr., Package Quantity 3

Product Information: Fluke 772 Milliamp Process Clamp On Meter with Integrated mA Loop can measure mA signals without breaking the loop. The Fluke 772 mA Clamp Meter expand upon the capabilities of the popular 771 mA Clamp Meter, adding loop power and mA sourcing to the troubleshooting and process calibration capabilities in all Fluke mA clamp meters. If you are spending time taking mA measurements by removing a wire and breaking the loop, calling the control room to isolate a loop, testing analog input/output on a console, troubleshooting devices with mA inputs and outputs, repairing intermittent or erratic 4-20 mA loops, going back to the shop to get extra tools then you need to take a good look at the Fluke 772 mA Clamp Meters. ItGÖs designed to save you time, and money, by eliminating... Less

FLUKE-334A,600 AMP AC DIGITAL CLAMP METER WITH BACKLIGHT Please see Fluke-373 and Fluke-374 for replacement

Digital Clamp On Ammeter, AC Response TRMS, 400 Max. AC Amps, 400 Max. DC Amps, 600 Max. AC Volts, 600 Max. DC Volts, 40000 Max. Ohms, Jaw Capacity 1-1/8, 1-5/16 In., Battery Type AAA, Safety Rating CAT IV 300V, CAT III 600VAudible Continuity YesCapacitance 1000uF, Frequency Counter 500 Hz, Memory Min./Max., Peak Hold YesDisplay Backlit LCD, Temp. Range 14 Degrees to 752 Degrees F (-10 Degrees to 400 Degrees C), Counts 6000Auto Ranging Yes, Data Hold Yes

Ac Clamp On Current Probe, Amps Ac 800a, Ac Frequency Response 30 Hz To 10 Khzjaw Capacity 2.1 In. (54mm), Max. Conductor Size 2-1/8 In., Connector Type 4mm Shrouded Banana Plugs, For Use With Digital Multimeter, Output 1ma/a, Accuracy +/-1 Percent Of Reading, Safety Rating Cat Iii 600 V, Includes Instructions, Manufacturers Warranty Length 1 Yr.

Ebay Template CUSTOMER SERVICE REPRESENTATIVES AVAILABLE MON - FRI 8AM TO 5PM EST 888.872.8008 ABOUT US SHIPPING INFORMATION PAYMENT INFORMATION COMBINED SHIPPING RETURN POLICY FAQ SEARCH HOME NETWORK SUPPLY STORE HOME 3.5mm Stereo Cables Adapters Amplifiers Batteries Coaxial Cable Component Cables Composite Cables Compression Connectors Connectors Couplers Digital Coax Cables FastHome Networking HDMI / DVI Cables HDTV Antennas Locks Overstock / Clearance Lots Power Management Pro Audio / DJ Ac

Fluke AMB-KIT1 Test Lead Set For Insulation Resistance Testers

Ac Clamp On Current Probe, Amps Ac 10/100/1000a, Ac Frequency Response 5 Hz To 100 Khzjaw Capacity 2.13 In. (54mm), Max. Conductor Size 2-1/8 In., Connector Type Bnc, For Use With Oscilloscope, Output 1, 10, 100mv/a, Accuracy +/-1 Percent Of Reading +1a, Safety Rating Cat Iii 600 Vmanufacturers Warranty Length 1 Yr.

Fluke 337 True-RMS Full Size Clamp On Meter with Backlight is a top-of-the-line True-rms clamp meter with MIN/MAX capability and a large jaw that measures ac/dc current and voltage, ohms, motor start up current (in-rush) and frequency. With the striking design of the Fluke 330 Series Clamp Meters, thereGÖs a new way for you make to current measurements. Take a new look at current measurement, at how you use your tools, and how to get the results you need, faster and more conveniently. The result is a new, ergonomic concept, shaped to fit your hand and to access tight spots easily. Safety Conformance: IEC 1010-2-032, 600V CAT III.Fluke Meter includes: Coated instruction card, Safety information sheet, Soft carrying case, TL75 test leads, Two AA Alkaline batteries. Additional Information:... Less

AC Clamp On Current Probe, Amps AC 800A, AC Frequency Response 30 Hz to 10 kHzJaw Capacity 2.1 In. (54mm), Max. Conductor Size 2-1/8 In., Connector Type 4mm Shrouded Banana Plugs, For Use With Digital Multimeter, Output 1mA/A, Accuracy +/-1 Percent of Reading, Safety Rating CAT III 600 V, Includes Instructions, Manufacturers Warranty Length 1 yr.

Product Information: About The Fluke 376 True-rms AC/DC Clamp Meter with iFlex The Fluke 376 True-rms AC/DC Clamp Meter with iFlex allows you to be ready for just about anything when working on electrical applications. The Fluke 376 True-rms AC/DC Clamp Meter provides improved performance that is perfect for a wide range of current measuring situations. The Fluke 376 True-rms AC/DC Clamp Meter can read up to 1000 A and 1000 V in both AC and DC modes, and offers true-rms voltage and current measurements. The Fluke 376 True-rms AC/DC Clamp Meter also includes the new iFlex flexible current probe that is designed to expand the measurement range to 2500 A AC while also offering increased display flexibility, improved wire access and the ability to measure around awkward sized conductors. ... Less

Digital Clamp On Ammeter, Ac Response Trms, 400 Max. Ac Amps600 Max. Ac Volts, 600 Max. Dc Volts, 4000 Max. Ohms, Jaw Capacity 1-1/8, 1-5/16 In., Battery Type Aaa, Safety Rating Cat Iv 300v, Cat Iii 600vaudible Continuity Yescapacitance 1000ufpeak Hold Yesdisplay Backlit Lcd, Temp. Range 14 Degrees To 752 Degrees F (-10 Degrees To 400 Degrees C), Counts 6000auto Ranging Yes, Data Hold Yes

AC/DC Clamp On Current Probe, Amps AC 30mA to 20A, AC Frequency Response 20 kHz, Amps DC 30mA to 30A, Jaw Capacity 3/4 In. (19mm), Max. Conductor Size 3/4 In., Connector Type Banana Plugs, For Use With DMMs, Output 100mV/A, Accuracy +/-1 Percent of Reading +/-2 mA, Safety Rating CAT III 300 V, Includes Instructions, Manufacturers Warranty Length 1 yr.

Product Information: Fluke 773 Milliamp Process Clamp On Meter with Advanced Process measure mA signals without breaking the loop. The Fluke 773 mA Clamp Meter is FlukeGÖs premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power. If you are spending time taking mA measurements by removing a wire and breaking the loop, calling the control room to isolate a loop, testing analog input/output on a console, troubleshooting devices with mA inputs and outputs, repairing intermittent or erratic 4-20 mA loops, going back to the shop to get extra tools then you to take a good look at the Fluke 773 mA Clamp Meters. ItGÖs designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without... Less

AC Clamp On Current Probe, Amps AC 6 to 6000A, AC Frequency Response 10 Hz to 50 kHzJaw Capacity 10-1/2 In. (265mm), Max. Conductor Size 10-1/2 In., Connector Type BNC, For Use With Oscilloscopes, Power Quality Analyzers, DMMs, Output 50, 5, 0.5mV/A, Accuracy +/-1 Percent of Range, Safety Rating CAT III 600 V, Includes Instructions, Manufacturers Warranty Length 1 yr.

Clamp On Ammeter, Ac Response Trms, 2500 Max. Ac Amps, 999.9 Max. Dc Amps, 600 Max. Ac Volts, 600 Max. Dc Volts, 60000 Max. Ohms, Jaw Capacity 1-1/3 In., Battery Type Aa, Safety Rating Cat Iv 600v, Cat Iii 1000v, Calibration Certificate Nist, Audible Continuity Yesfrequency Counter 5 To 500 Hzpeak Hold Yesdisplay Backlit Lcdcounts 6000, Calibration Frequency 10 To 500 Hz, Auto Ranging Yes, Data Hold Yesincludes Soft Carrying Case, Test Leads, (2) Batteries, Instructions