Category

Building Supplies
Showing results for "exterior hvac duct insulation"
Results 1 - 40 of 1500+

Duct Fitting 8 Round Saddle...

$31.95
eBay Duct Fitting 8 Round Saddle Tap On Flat Hvac Duct Sheet Metal Air Fittings
+ $10.86 shipping
/duct-fitting-8-round/x5QpSO_cON4GnLLxK2UPNA==/info
eBay
IN_STOCK ( In stock )
1ryanmurray Store Duct Fitting 8 Round Saddle Tap on Flat HVAC Duct Easy to order ductwork fittings sent directly to you. Air Fittings in the sizes and styles you need to finish your HVAC home improvement job. Ductwork Supplies at reasonable prices, with fast shipping, and all the information you need. HVAC Ductwork Fittings don't have to cost an arm and a leg! The saddle tap duct fitting on round is a great way to branch a round duct run off of a round or flat duct run at a 45 degree angle fo
More

Reflectix CDW48050 R4.2/R6/R8...

$185.40
Westside Wholesale Reflectix CDW48050 R4.2/R6/R8 All-Weather Outdoor Double Reflective Duct Insulation - Standard Edge, 48 x 50 Ft
No Shipping Info
/reflectix-cdw48050/0O14jCenbzfOz-A7M8XXSA==/info
Westside Wholesale
IN_STOCK ( In stock )
Store not rated
Reflectix Insulation CDW48050 is a standard edge, outdoor, double reflective duct insulation that is an excellent fiberfree alternative to other types of duct insulations. Reflectix outdoor wrap is a 5/16 inch thick, seven layer, reflective insulation consisting of two outer layers of aluminum foil that reflect 97 of radiant heat. The outside layer of foil is ten times thicker on one side and is made of heavier foil. Each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and durability. Radiant heat, the major source of heat flow, is energy in the form of infrared waves. It travels as the speed of light, even through a vacuum, and is... Less
More

Siemens - Hvac Duct Humidity...

$99.00
eBay Siemens - Hvac Duct Humidity Sensor Rh 2% - Qfm3101
+ $4.12 shipping
/siemens-hvac-duct/Oul_FXQpe8ZkQA1gHvh76w==/info
eBay
IN_STOCK ( In stock )
THIS AUCTION IS FOR ONE (1) NEW / UNUSED SURPLUS SIEMENS - HVAC DUCT HUMIDITY SENSOR MODEL / PART NO. QFM3101 RH 2% A NEW OLD STOCK - IN THE ORIGINAL BOX WITH ALL ORIGINAL FACTORY ACCESSORIES SHOWN IN THE PHOTOS.ANY QUESTIONS FEEL FREE TO ASK !
More

Duct Fitting 6 Round Saddle...

$22.79
eBay Duct Fitting 6 Round Saddle Tap On 10 Round Hvac Duct Sheet Metal Air Fittings
+ $10.81 shipping
/duct-fitting-6-round/2uJcMGfmFHG-VvbfOtQ7dA==/info
eBay
IN_STOCK ( In stock )
1ryanmurray Store Duct Fitting 6 Round Saddle Tap on 10 Round HVAC Duct Easy to order ductwork fittings sent directly to you. Air Fittings in the sizes and styles you need to finish your HVAC home improvement job. Ductwork Supplies at reasonable prices, with fast shipping, and all the information you need. HVAC Ductwork Fittings don't have to cost an arm and a leg! The saddle tap duct fitting on round is a great way to branch a round duct run off of a round or flat duct run at a 45 degree ang
More

S Connectors, 10 Pieces 4',...

$35.50
eBay S Connectors, 10 Pieces 4', Heating, Cooling, Hvac, Duct Work, Furnace
Free Shipping
/s-connectors-10-pieces/6RQviAXciF_U3AFmERUv0Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are viewing American made, 26 gauge sheet metal S-connectors. This is for 10, 4' long connectors. S-connectors are used in conjunction with drive connectors when installing duct work. This product will need to be cut to the appropriate size to fit your needs.Parts and products are usually shipped out in 1 to 2 business days after an order has been received (Orders placed Friday after 12:00pm, Mountain Time, may be shipped out the following Monday depending on production time). We offer free
More

Siemens - Hvac Duct Humidity...

$99.00
eBay Siemens - Hvac Duct Humidity Sensor Rh 5% - Qfm2101
+ $4.12 shipping
/siemens-hvac-duct/MAUibCwNuPCNcZ1PuwdTuw==/info
eBay
IN_STOCK ( In stock )
THIS AUCTION IS FOR ONE (1) NEW / UNUSED SURPLUS SIEMENS - HVAC DUCT HUMIDITY SENSOR MODEL / PART NO. QFM2101 RH 5%DC 4 / 20 mA NEW OLD STOCK - IN THE ORIGINAL BOX WITH ALL ORIGINAL FACTORY ACCESSORIES SHOWN IN THE PHOTOS.ANY QUESTIONS FEEL FREE TO ASK !
More

Duct Fitting 6 Round Saddle...

$22.79
eBay Duct Fitting 6 Round Saddle Tap On 6 Round Hvac Duct Sheet Metal Air Fittings
+ $10.86 shipping
/duct-fitting-6-round/r0PBQGKJIZr6wi926Vjyhw==/info
eBay
IN_STOCK ( In stock )
1ryanmurray store Duct Fitting 6 Round Saddle Tap on 6 Round HVAC Duct Easy to order ductwork fittings sent directly to you. Air Fittings in the sizes and styles you need to finish your HVAC home improvement job. Ductwork Supplies at reasonable prices, with fast shipping, and all the information you need. HVAC Ductwork Fittings don't have to cost an arm and a leg! The saddle tap duct fitting on round is a great way to branch a round duct run off of a round or flat duct run at a 45 degree angl
More

Hi-Tech Duravent S-LD Series...

$46.53
Sears Hi-Tech Duravent S-LD Series Metalized Film Air/HVAC Duct Hose Silver 7 ID 25' Length
No Shipping Info
/hitech-duravent-sld/UItJRQyMXPmhnYnZRtLsuQ==/info
Sears
IN_STOCK ( In stock )
Hi-Tech Duravent S-LD Series Metalized Film Air/HVAC Duct Hose Silver 7 ID 25' Length - This Hi-Tech Duravent S-LD series metalized film duct hose is suitable for bridging misalignments between system components and ducts and for transferring hot or cool air in HVAC applications. The hose is made of a metalized reinforced film laminate for light weight and flexibility permanently bonded to a coated wire helix reinforcement for strength and resistance to corrosion and crushing. It has an operating temperature range of 0 to 250 degrees F. It is Underwriters Laboratories (UL) Listed meets National Fire Prevention Association (NFPA) standards 90A and 90B and can be used with a variety of coupling options (not included). This metalized film duct hose is suitable for industrial commercial and... Less
More

Hvac, Duct Cleaning Metal...

$13.75
eBay Hvac, Duct Cleaning Metal Access Door 8 X 8 2 Sash Locks Pre Drilled Holes
+ $6.45 shipping
/hvac-duct-cleaning-metal/KR3id6d0oB02M91MbNXKrg==/info
eBay
IN_STOCK ( In stock )
OFFERED: NEW NO PACKAGING ----- UNLESS YOU BUY 10 8 X 8 HVAC DUCT ACCESS DOOR ACCESS DOOR NO MFG NAME FOUND, BUT THEY SAY UN ION MADE MODEL C DUCT CLEANING ACCESS DOOR HVAC 10 X 10 METAL DUCT ACCESS PANEL REMOVABLE LATCH The door offer quick, easy and economical installation wherever duct access is needed. Manual locks assure tight door closure while adhesive backing along with sheet metal screws assure an airtight duct installation. Pre-punched screw holes • Adhesive gasket for airtight
More

Reflectix HVBP48050...

$54.10
Westside Wholesale Reflectix HVBP48050 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Standard Edge, 48 x 50 Ft
No Shipping Info
/reflectix-hvbp48050/ciYiDxUNIU9jbqadqGkfhw==/info
Westside Wholesale
IN_STOCK ( In stock )
Store not rated
Reflectix Insulation HVBP48050 is a standard edge double reflective duct insulation that is an excellent fiberfree alternative to other types of duct insulations. Reflectix is a 5/16 inch thick, seven layer, reflective insulation consisting of two outer layers of aluminum foil that reflect 97 of radiant heat, each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and durability. Radiant heat, the major source of heat flow, is energy in the form of infrared waves. It travels as the speed of light, even through a vacuum, and is either transmitted through, absorbed into, or reflected by any material it contacts. Reflectix double bubble... Less
More

Hvac, Duct Cleaning Metal...

$13.00
eBay Hvac, Duct Cleaning Metal Access Door 6 X 6 2 Sash Locks Pre Drilled Holes
+ $5.75 shipping
/hvac-duct-cleaning-metal/uPtqJlkhk3p9xW-zwxuh0A==/info
eBay
IN_STOCK ( In stock )
OFFERED: NEW NO PACKAGING ----- UNLESS YOU BUY 10 6 X 2 HVAC DUCT ACCESS DOOR 2 SASH LOCKS ACCESS DOOR NO MFG NAME FOUND, BUT THEY SAY UN ION MADE MODEL C DUCT CLEANING ACCESS DOOR HVAC 10 X 10 METAL DUCT ACCESS PANEL REMOVABLE LATCH The door offer quick, easy and economical installation wherever duct access is needed. Manual locks assure tight door closure while adhesive backing along with sheet metal screws assure an airtight duct installation. Pre-punched screw holes • Adhesive gasket
More

Siemens - Hvac Duct Mount...

$19.99
eBay Siemens - Hvac Duct Mount Hardware Kit - Ask71.1u / Factory Sealed
+ $10.66 shipping
/siemens-hvac-duct-mount/6gDhlxgz6PwL1_pwOF4ETg==/info
eBay
IN_STOCK ( In stock )
THIS AUCTION IS FOR ONE (1) BRAND NEW / FACTORY SEALED SIEMENS - DUCT MOUNTING HARDWARE KIT PRODUCT NO. ASK71.1U NEW OLD STOCK - BOXES ARE IN EXCELLENT CONDITION AND HAVE BEEN IN STORAGE SINCE INITIAL RECEIPT.ANY QUESTIONS FEEL FREE TO ASK !
More

Reflectix HVBP48125...

$160.00
Westside Wholesale Reflectix HVBP48125 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Standard Edge, 48 x 125 Ft
No Shipping Info
/reflectix-hvbp48125/MTqrzy0M4RiruHuLs3d7sA==/info
Westside Wholesale
IN_STOCK ( In stock )
Store not rated
Reflectix Insulation HVBP48125 is a standard edge double reflective duct insulation that is an excellent fiberfree alternative to other types of duct insulations. Reflectix is a 5/16 inch thick, seven layer, reflective insulation consisting of two outer layers of aluminum foil that reflect 97 of radiant heat, each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and durability. Radiant heat, the major source of heat flow, is energy in the form of infrared waves. It travels as the speed of light, even through a vacuum, and is either transmitted through, absorbed into, or reflected by any material it contacts. Reflectix double bubble... Less
More

Reflectix HVST1610003...

$44.00
Westside Wholesale Reflectix HVST1610003 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Staple Tab, 16 x 100 Ft
No Shipping Info
/reflectix-hvst1610003/MbAvFO1wsjDoOtxbzieDvQ==/info
Westside Wholesale
IN_STOCK ( In stock )
Store not rated
Reflectix Insulation HVST1610003 is a staple tab edge, double reflective duct insulation that is an excellent fiberfree alternative to other types of duct insulations. Reflectix is a 5/16 inch thick, seven layer, reflective insulation consisting of two outer layers of aluminum foil that reflect 97 of radiant heat, each layer of foil is bonded to a tough layer of polyethylene for strength. Also, both sides of the material are permanently bonded together creating a 3/4 inch tab on each edge to permit staple use. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and durability. Radiant heat, the major source of heat flow, is energy in the form of infrared waves. It travels as the speed of light, even... Less
More

Hi-Tech Duravent S-TL Series...

$86.55
Sears Hi-Tech Duravent S-TL Series PVC Fiberglass S-TL Air/HVAC Duct Hose Grey 9 ID 25' Length
No Shipping Info
/hitech-duravent-stl/XdDG0pWa7C4y2Ifo3vCgUw==/info
Sears
IN_STOCK ( In stock )
Hi-Tech Duravent S-TL Series PVC Fiberglass S-TL Air/HVAC Duct Hose Grey 9 ID 25' Length - This Hi-Tech Duravent S-TL series coated fiberglass duct hose is suitable for bridging misalignments between system components and ducts and for transferring hot or cool air in HVAC applications. The hose is made of coated woven fiberglass for light weight and flexibility and is permanently bonded to a coated wire helix reinforcement for strength and resistance to corrosion and crushing. It has an operating temperature range of 0 to 250 degrees F. It is Underwriters Laboratories (UL) Listed meets National Fire Prevention Association (NFPA) standards 90A and 90B and can be used with a variety of coupling options (not included). This coated fiberglass duct hose is suitable for industrial commercial... Less
More

Reflectix HVBP60125...

$192.00
Westside Wholesale Reflectix HVBP60125 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Standard Edge, 60 x 125 Ft
No Shipping Info
/reflectix-hvbp60125/TI5oPgyQ8IPsXWG5hUv0Xg==/info
Westside Wholesale
IN_STOCK ( In stock )
Store not rated
Reflectix Insulation HVBP60125 is a standard edge double reflective duct insulation that is an excellent fiberfree alternative to other types of duct insulations. Reflectix is a 5/16 inch thick, seven layer, reflective insulation consisting of two outer layers of aluminum foil that reflect 97 of radiant heat, each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and durability. Radiant heat, the major source of heat flow, is energy in the form of infrared waves. It travels as the speed of light, even through a vacuum, and is either transmitted through, absorbed into, or reflected by any material it contacts. Reflectix double bubble... Less
More

Thermaflex Km (r6.0) 9 In. X...

$34.99
eBay Thermaflex Km (r6.0) 9 In. X 25 Ft. Hvac Ducting - 0538-0900-0001
+ $14.71 shipping
/thermaflex-km-r60-9/n4AUHCWC2TTKJHCBppi2jw==/info
eBay
IN_STOCK ( In stock )
bjester store Thermaflex KM (R6.0) 9 in. x 25 ft. HVAC Ducting 0538-0900-0001 Click to view supersize image Click to view supersize image Item Detail:New , unused, Thermaflex KM (R6.0) 9 in. x 25 ft. HVAC Ducting - 0538-0900-0001 . The flex duct is in perfect condition, still sealed in the original boxes (see pics ). All of our items are given extra care and superfast shipping.PRODUCT DESCRIPTION Manufacturer: Thermaflex Part Number: 0538-0900-0001 Use: Commercial - Industrial - Residential Mo
More

Duct Fitting 18 Round Saddle...

$45.00
eBay Duct Fitting 18 Round Saddle Tap On Flat Hvac Duct Sheet Metal Air Fittings
Free Shipping
/duct-fitting-18-round/CrJ4fIPjXy8BMnl0Er1Few==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1ryanmurray Store Duct Fitting 18 Round Saddle Tap on Flat HVAC Duct Easy to order ductwork fittings sent directly to you. Air Fittings in the sizes and styles you need to finish your HVAC home improvement job. Ductwork Supplies at reasonable prices, with fast shipping, and all the information you need. HVAC Ductwork Fittings don't have to cost an arm and a leg! The saddle tap duct fitting on round is a great way to branch a round duct run off of a round or flat duct run at a 45 degree angle f
More

Rectangle Duct Work 12x8,...

$52.00
eBay Rectangle Duct Work 12x8, Heating, Cooling, Hvac, Sheet Metal Duct
Free Shipping
/rectangle-duct-work-12x8/4bl8dyNYMl8rcBMPBz--jA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are viewing American made, custom fit, galvanized steel duct. This listing is for 12x8 duct work up to 48 long , and will be built to your specifications (Prices may vary on custom duct over 20x8, please ask for a price). Our duct also come in 14x8, 16x8, 18x8and 20x8 (Please check our other listings for additional sizes). The duct work is shipped out in four, marked pieces. The sides are held together with snap lock seams that you tap together with a hammer. Listing also inclu
More

Reflectix HVBP2405002...

$32.00
Westside Wholesale Reflectix HVBP2405002 R4.2/R6/R8 HVAC Indoor Double Reflective Duct Insulation - Standard Edge, 24 x 50 Ft
No Shipping Info
/reflectix-hvbp2405002/BWQR8EtKw9tm-ktFHxgIfg==/info
Westside Wholesale
IN_STOCK ( In stock )
Store not rated
Product Information:This item may qualify for Energy Star Tax Credits for Consumer Energy Efficiency when installed properly on walls, attics, or crawl spaces: Reflectix Insulation HVBP2405002 is a standard edge double reflective duct insulation that is an excellent fiberfree alternative to other types of duct insulations. Reflectix is a 5/16 inch thick, seven layer, reflective insulation consisting of two outer layers of aluminum foil that reflect 97 of radiant heat, each layer of foil is bonded to a tough layer of polyethylene for strength. Two inner layers of insulating bubbles resist conductive heat flow while a center layer of polyethylene gives Reflectix high reliability and durability. Radiant heat, the major source of heat flow, is energy in the form of infrared waves. It travels... Less
More

Rectangle Duct Work 14x8,...

$56.00
eBay Rectangle Duct Work 14x8, Heating, Cooling, Hvac, Sheet Metal Duct.
Free Shipping
/rectangle-duct-work-14x8/ntlk_c3O8Th1qFdOtq3B0w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are viewing American made, custom fit, galvanized steel duct. This listing is for 14x8 duct work up to 48 long , and will be built to your specifications (Prices may vary on custom duct over 20x8, please ask for a price). Our duct also come in 12x8, 16x8, 18x8and 20x8 (Please check our other listings for additional sizes). The duct work is shipped out in four, marked pieces. The sides are held together with snap lock seams that you tap together with a hammer. Listing also inclu
More

HVAC Vents 238 CFM Power 4...

$149.00
Home Depot HVAC Vents 238 CFM Power 4 in. Wall Mount Exterior Centrifugal Exhaust Metal Duct Vent Fan VCN 100
Free Shipping
/hvac-vents-238-cfm-power/Am6tpUXZQm4MpmPSXb7IOw==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Heating, Venting & Cooling at The Home Depot. Vents VCN 100 exterior wall-mounted exhaust fan is ideal for residential and commercial ventilation applications where quiet and powerful exhaust is required and space is limited. It allows powerful air extraction from one or more points and it is suitable for connection to long duct runs. Guaranteed noise free application solution for homes, offices and commercial facilities. It designed for simple installation and years of maintenance free operation.
More

Rectangle Duct Work 20x8,...

$60.00
eBay Rectangle Duct Work 20x8, Heating, Cooling, Hvac, Sheet Metal Duct.
Free Shipping
/rectangle-duct-work-20x8/WPuUG9pUEIT8Qmh51ca8dQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Your viewing 26 guage galvanized rectangle duct work which comes in 20 wide by 8 deep, and 48 long. each section comes with 2- s, and drive drive connectors. Other sizes can be made upon your needs. Check my other listings for other sizes, and more kinds of fittings.The duct sections come knocked down in 4 peices, with snaplock seams that you field assemble. We are a custom sheet metal shop, that uses American made steel, and,made in Potter Ne. USA, please message me for custom duct work. Th
More

Duct Insulation, 1-1/2In x...

$48.01
Walmart.com Duct Insulation, 1-1/2In x 48In x 25Ft
+ $16.25 shipping
/duct-insulation-112in/XPTQOczd3fb05p8AF6RRJA==/info
Walmart.com
IN_STOCK ( In stock )
Duct Insulation, Wrap, Fiberglass Material of Construction, Foil Scrim Kraft Jacket Material, Color Silver, Thickness 1-1/2 In., Approx. R Factor 4.2, 3/4 lbs. Density, 48 In. Width, 25Ft Length, Temp. Range -32 to 250 F, Standards ASTM C-411, ASTM C-1104, ASTM C665, ASTM C-1338, ASTM E-84, UL723, NFPA 90A, CAN/ULC S102-1188, ASTM C1290, ASTM C553, ASTM C1136s Fiberglass Duct InsulationDuct Insulation WrapFor HVAC systems that operate below ambient temperatures, and where temperature control and a vapor barrier are required. Insulation comes with a vapor barrier and a 2 stapling tab.For use in commercial and industrial heating, air conditioning, and power and process equipment applications. Meets ASTM C-411, C-1104, C665, C-1338, E-84; NFPA 90A; UL, C-UL Listed.Temp. range: -32 to 250 F... Less
More

Rectangle Duct Work 16x8,...

$60.00
eBay Rectangle Duct Work 16x8, Heating, Cooling, Hvac, Sheet Metal Duct.
Free Shipping
/rectangle-duct-work-16x8/oYVvU5eTeZ0AvpXcVeqMig==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Your viewing 26 guage galvanized rectangle duct work which comes in 16 wide by 8 deep, and 48 long. each section comes with 2- s, and drive drive connectors. Other sizes can be made upon your needs. Check my other listings for other sizes, and more kinds of fittings.The duct sections come knocked down in 4 peices, with snaplock seams that you field assemble. We are a custom sheet metal shop, that uses American made steel, and,made in Potter Ne. USA, please message me for custom duct work. Th
More

Rectangle Duct Work 18x8,...

$60.00
eBay Rectangle Duct Work 18x8, Heating, Cooling, Hvac, Sheet Metal Duct.
Free Shipping
/rectangle-duct-work-18x8/EsqM0yhxDVyjKw5ax_0_Pg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Your viewing 26 guage galvanized rectangle duct work which comes in 18 wide by 8 deep, and 48 long. each section comes with 2- s, and drive drive connectors. Other sizes can be made upon your needs. Check my other listings for other sizes, and more kinds of fittings.The duct sections come knocked down in 4 peices, with snaplock seams that you field assemble. We are a custom sheet metal shop, that uses American made steel, and,made in Potter Ne. USA, please message me for custom duct work. Th
More

Duct Insulation, 1In x 24In x...

$15.59
Sears Duct Insulation, 1In x 24In x 48In
No Shipping Info
/duct-insulation-1in-x/s7CwX8zAJIhVONJ8pPDzqA==/info
Sears
IN_STOCK ( In stock )
Duct Insulation, Board, Fiberglass Material of Construction, Foil Scrim Kraft Jacket Material, Color Silver, Thickness 1 In., Approx. R Factor 4.3, 3 lbs. Density, 24 In. Width, 48 In. Length, Temp. Range -32 to 450 F Unfaced Side, -32 to 150 F Faced Side, Standards ASTM C612, Type IA, ASTM C612 TypeIB, ASTM C553 Type III, HH-I-558C, HH-I-558B, ASTM E-84, NRC 1.36, MIL-I-24244C, UL723, NFPA255, ASTM C795, ASTM C1136 Fiberglass Duct InsulationFor use in commercial and industrial heating, air conditioning, and power and process equipment applications. Duct Insulation BoardFor systems that operate below ambient temperatures and where a vapor barrier is required. Insulation has square corners for a finished appearance on duct and equipment systems. Cuts easily with a utility knife and can be... Less
More

HVAC Vents 306 CFM Power 8...

$215.00
Home Depot HVAC Vents 306 CFM Power 8 in. Wall Mount Exterior Centrifugal Exhaust Metal Duct Vent Fan VCN 200
Free Shipping
/hvac-vents-306-cfm-power/hF96fCfltzTTkVQloNZc_Q==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Heating, Venting & Cooling at The Home Depot. Vents VCN 200 exterior wall-mounted exhaust fan is ideal for residential and commercial ventilation applications where quiet and powerful exhaust is required and space is limited. It allows powerful air extraction from one or more points and it is suitable for connection to long duct runs. Guaranteed noise free application solution for homes, offices and commercial facilities. It designed for simple installation and years of maintenance free operation.
More

Transition Fitting, Duct...

$18.00
eBay Transition Fitting, Duct Work, Hvac, Heating, Cooling, Custom Sheet Metal Work
Free Shipping
/transition-fitting-duct/e-y3y227yUPAegBzHAooNA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
You are viewing 8 deep, and your choice of 12, 14, 16, 20 wide to 14, 16 , 20 for hvac duct work. These go with rectangle duct to reduce, or increase duct size the fittings are 11 long dive to drive, and come with 2 Ss, and Drives connectors.
More

60 Black Uv Stabilized Heavy...

$24.95
eBay 60 Black Uv Stabilized Heavy Duty 175lb Cable/zip Ties, Hvac/duct (10 Pack), 5'
+ $5.00 shipping
/60-black-uv-stabilized/ptwadza_yRISShtDwFAd3Q==/info
eBay
IN_STOCK ( In stock )
60 Heavy Duty Cable Ties (10 Pack)Made from UV Stabilized Weather Resistant Black 6.6 Nylon Material Flammability Rating: UL94V-2 Max Bundle Diameter: 20Loop Tensile Strength: 175 Pounds RoHS Compliant, UL Listed Great for HVAC/Duct Work and Outdoor Uses Ships with Tracking Number Koolertek is a family owned a
More

Hvac Manual Duct Damper...

$5.95
eBay Hvac Manual Duct Damper Control Handle Lever Kit Cain Mfg. Co. Kw1k1-71
No Shipping Info
/hvac-manual-duct-damper/4KfMpV76RkiVqBNaTuc7Dg==/info
eBay
IN_STOCK ( In stock )
One HVAC Manual Duct Damper Control Lever Handle Kit Made by Cain Manufacturing Co., Pelham, AL KW1K1-71 Complete five-piece handle kit to create or replace an inline damper duct control lever. You manufacture the damper size you need and attach this handle kit. Kit consists of: 1 spring-loaded bearing, 1 damper
More

Duct Insulation, 1-1/2In x...

$73.56
Sears Duct Insulation, 1-1/2In x 48In x 25Ft
No Shipping Info
/duct-insulation-112in/kBgV5X30Go_8E6dq5Zhpag==/info
Sears
IN_STOCK ( In stock )
Duct Insulation, Wrap, Fiberglass Material of Construction, Foil Scrim Kraft Jacket Material, Color Silver, Thickness 1-1/2 In., Approx. R Factor 6.5, 1 lbs. Density, 48 In. Width, 25Ft Length, Temp. Range -32 to 250 F, Standards ASTM C-411, ASTM C-1104, ASTM C665, ASTM C-1338, ASTM E-84, UL723, NFPA 90A, CAN/ULC S102-1188, ASTM C1290, ASTM C553, ASTM C1136s Fiberglass Duct InsulationDuct Insulation WrapFor HVAC systems that operate below ambient temperatures, and where temperature control and a vapor barrier are required. Insulation comes with a vapor barrier and a 2 stapling tab.For use in commercial and industrial heating, air conditioning, and power and process equipment applications. Meets ASTM C-411, C-1104, C665, C-1338, E-84; NFPA 90A; UL, C-UL Listed.Temp. range: -32 to 250 F 48W... Less
More

Broan-NuTone Broan Aluminum...

Free Shipping
2 stores Broan-NuTone Broan Aluminum wall cap for 8 inch round duct, with backdraft damper, 8 in. Round by Broan (026715022946)
Broan range hood ducting accessories are used when installing a broan range hood. The wall caps,...
More

HVAC Broan 3-1/4 in. x 10 in...

$26.96
Home Depot HVAC Broan 3-1/4 in. x 10 in. Galvanized Steel Vertical Elbow Duct Transition 428
+ $5.99 shipping
/hvac-broan-314-in-x-10/RwBLShqaozma1ufQU6I8dw==/info
Home Depot
IN_STOCK ( In stock )
Shop for Heating, Venting & Cooling at The Home Depot. The radius design of this Model 428 Broan 3-1/4 in. x 10 in. Galvanized Steel Vertical Elbow Duct Transition enables smooth airflow. It connects two 3-1/4 in. x 10 in. ducts at a 90 degree angle. It is made from 30-gauge galvanized steel for a long life.
More

HVAC Broan-NuTone 3-1/4 in. x...

$25.88
Home Depot HVAC Broan-NuTone 3-1/4 in. x 10 in. Horizontal Steel Elbow for Duct 429
Free Shipping
/hvac-broannutone-314/bn7GQkyOE_BtlDnXbPtjiw==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Heating, Venting & Cooling at The Home Depot. The Model 429 Broan Horizontal Steel Elbow for 3.25 in. x 10 in. duct can help save valuable cabinet space. Maximize the air and sound performance of your Broan range hood using this ducting accessory. It is made from 30-gauge galvanized steel for long life.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145