Category

Tools and Accessories
Showing results for "exhaust pipe flaring tool"
Results 1 - 40 of 1500+

Lisle PIPE SHAPER 1-1/2 TO...

$31.47
Sears Lisle PIPE SHAPER 1-1/2 TO 3IN.
+ $8.99 shipping
/lisle-pipe-shaper-112/E6WT1eUNCYPOptN0804nfA==/info
Sears
IN_STOCK ( In stock )
Features and Benefits: Rounds out exhaust pipes that are crushed or bent Reshapes pipes bent or flared out by placing big end over pipe Range is 1 1/2 - 3 5/8 (38.1 - 92mm) Boxed when delivered Pipe End Shaper rounds pipes in or out. Brought to you by Lisle.
More

Powerbuilt 4-Piece Exhaust...

$157.60
Home Depot Powerbuilt 4-Piece Exhaust Pipe Tool Kit 648612
Free Shipping
/powerbuilt-4piece/MeQLthk5pB1Q13K4yci7NQ==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Automotive at The Home Depot. For servicing, installing and repairing exhaust pipes, including cutting pipe up to 3-1/2 in. diameter, flaring and dent removal. Lifetime warranty on tools. Replacement parts available.
More

KD Tools (KD 2071) Exhaust...

Free Shipping
2 stores KD Tools (KD 2071) Exhaust and Tail Pipe Expanders 1-13/16" to 2-1/2" # 2071 (082171020711)
Also known as: KD 2071, KD2071, KDT-2071, KDT2071; Features and Benefits: Pipe size:...
More

Lisle 31500 Exhaust Strut...

Free Shipping
3 stores Lisle 31500 Exhaust Strut Cutoff Tool
Four knife-edged cutting wheels cut quickly and cleanly. Can be operated with one hand. Less than...
More

RIDGID RT3422 Pipe Tapping...

$3,041.10
Ohio Power Tool RIDGID RT3422 Pipe Tapping Tool w/ 3/4 - 2 CTS Set (flared) 91192
No Shipping Info
/ridgid-rt3422-pipe/7Ld5124STp3cUcVMXXDvig==/info
Ohio Power Tool
IN_STOCK ( In stock )
RIDGID Easy to use. At only 21, this lightweight and compact tool is great for tight quarters. Heavy-Duty Design. Sturdy machined, corrosion- resistant materials for dependable lifelong benefits. Built-in bleed valve. Allows for easy purge of chips. Independent cutter feed gives the operator total independent control of the cutter feed rotation for optimal saw life. Taps a variety of materials. The RT 3422 is capable of tapping into steel, cast iron, ductile iron, and plastic pipe. Versatility. The RT3422 is capable of tapping mains of water up to 500 psig and steam, air or natural gas up to 150 psig. Coupon retaining bits. Exclusive pilot bits give you the confidence that the coupon will not be dropped in the pipe, preventing medium contamination or possible... Less
More

K-tool International Kti70081...

$277.42
eBay K-tool International Kti70081 Brake Pipe Flaring Tool
Free Shipping
/ktool-international/npFjc8M8sHw3nuU3wIZnpg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Features and Benefits: Easily form 45-degree double, single and bubble flares in OE steel, stainless steel, and soft metal tubing Use with 3/16-, 1/4-, 5/16- and 3/8-diameter lines All the brake-flaring forming dies are mounted right on the turret T-handle screw clamp securely holds line in place during forming Vise-mounted This brake flaring tool will pay for itself with the first project, and itll give you peace of mind knowing that your brake flares are of OE-precision quality and safety. Mounts in your vise to help you easily form 45-degree double, single and bubble flares in OE steel, stainless steel, and soft metal tubing. Use with 3/16-, 1/4-, 5/16- and 3/8-diameter lines...which means it will handle all your plumbing jobs from brake lines to transmission cooler lines and fuel... Less
More

Lisle PIPE SHAPER 1-1/2 TO...

$31.47
Sears Lisle PIPE SHAPER 1-1/2 TO 3IN.
+ $8.99 shipping
/lisle-pipe-shaper-112/E6WT1eUNCYPOptN0804nfA==/info
Sears
IN_STOCK ( In stock )
Features and Benefits: Rounds out exhaust pipes that are crushed or bent Reshapes pipes bent or flared out by placing big end over pipe Range is 1 1/2 - 3 5/8 (38.1 - 92mm) Boxed when delivered Pipe End Shaper rounds pipes in or out. Brought to you by Lisle.
More

Professional Brake Tubing...

$249.99
Eastwood.com Professional Brake Tubing Flaring Tool Eastwood 25304
+ $19.95 shipping
/professional-brake-tubing/lNuNvhBrUk0uMm7F863WkA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Professional Brake-Flaring Tool lets you create 3 kinds of precision flares, in any of 5 sizes of tubing, in minimal time This brake line flaring tool will pay for itself with the first project, and it'll give you peace of mind knowing that your brake flares are of OE-precision quality and safety. You don't want to skimp on the brake system of your project vehicle Create 45-degree single, double and bubble brake flares in secondsBrake- flaring tool works with stainless steel, steel, and soft metal tubingUse for brake lines, transmission cooler lines, fuel linesTurret- style indexed head keeps all brake-line-flaring forming dies ready to useQuick-release T-handle screw clamp securely holds the tube-retaining diesIncludes brake-flare forming tool 3/16, 1/4, 5/16, 3/8 and 4.75mm... Less
More

KD Tools Double/Bubble...

$122.89
Advance Auto Parts KD Tools Double/Bubble Flaring Tool Kit - KDT41880
Free Shipping
/kd-tools-doublebubble/b9-jYwJovxbk3gE7tz4Knw==/info
Advance Auto Parts
IN_STOCK ( In stock )
Free Shipping
Complete Double and Bubble flaring tool assortmentSlots on yoke firmly engage with bar assembly Include corresponding adapters for forming double flaresForged alloy steel and through hardenedStorage case with full instructions Precisely flares tubing up to 0.040 wall thickness to SAE/Metric 45 degree flares. Hardened bar assembly clamps 11 tubing sizes: 3/16, 1/4, 5/16, 3/8, 7/16, 5/8, 1/2, 4.7, 6, 8, and 10mm. Do not use on stainless steel tubing Set contains: SAE Bar Assembly, Metric Bar Assembly, Yoke Assembly, Reamer Cutter, 3/16 Flaring Tool Adapter, 7/16 Flaring Tool Adapter, 1/2 Flaring Tool Adapter, 5/8 Flaring Tool Adapter, 4.7, 6, 8, and 10mm Flaring Tool Adapter. Most Brake Tools products are available for in-store pickup from Advance Auto Parts.
More

Pittsburgh Automotive Exhaust...

$60.90
Sears Marketplace Pittsburgh Automotive Exhaust Pipe Cut-off Tool
No Shipping Info
/pittsburgh-automotive/SKQWvWm1R9CNQVl2afr0HA==/info
Sears Marketplace
IN_STOCK ( In stock )
Pittsburgh Automotive Exhaust Pipe Cut-off Tool
More

Beta Tools 94/S10, 10 Piece...

$271.00
Pegasus Auto Racing Supplies Beta Tools 94/S10, 10 Piece Flare Nut Wrench Set, Metric
Free Shipping
/beta-tools-94s10-10/WWnSbTZpoSSsIYLWBH5M0A==/info
Pegasus Auto Racing Supplies
IN_STOCK ( In stock )
Free Shipping
Beta Tools 94/S10, 10 Piece Flare Nut Wrench Set, Metric
More

Ridgid Flaring Tools - 83037

$229.46
Shoplet.com Ridgid Flaring Tools - 83037
Free Shipping
/ridgid-flaring-tools/z2QlMWIcWv1wnUKhzGHpEA==/info
Shoplet.com
IN_STOCK ( In stock )
Free Shipping
All flaring tools listed are recommended for soft materials such as aluminum and soft copper. No. 454W, No. 455, and No. 375 will also flare steel, stainless steel, hard copper, and brass. No. 458R and No. 377 will flare steel, stainless steel, hard copper, and brass thru wall thickness of .035 inches. No. 458R this precision tool provides smooth, uniform flares with minimum effort. The ratcheting feed screw handle turns easily and requires less motion and effor than a standard handle. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow.
More

Parflare Mft-08 Manual...

$122.72
Zoro Parflare Mft-08 Manual Flaring Tool,ptfe, Hdpe,flare
Free Shipping
/parflare-mft08-manual/oXl3J44Um0TQZpPZVCfadg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Manual Flaring Tool, Flare Type 45 Degrees , Body Material PTFE/HDPE, Connection Type Flare, Tube Size 1/2 In., Temp. Range -
More

Exhaust Pipe Cut-Off Tool...

$90.74
Sears Marketplace Exhaust Pipe Cut-Off Tool with four high carbon steel cutting wheels
No Shipping Info
/exhaust-pipe-cutoff-tool/42CJ-RXhnEI9EfVieOgkGA==/info
Sears Marketplace
IN_STOCK ( In stock )
Exhaust Pipe Cut-Off Tool with four high carbon steel cutting wheels
More

Mastercool - (MAS71200)...

$206.99
ToolTopia.com Mastercool - (MAS71200) Push-Connect Flaring Tool Set # 71200, Tools & Accessories
Free Shipping
/mastercool-mas71200/NVI0_dmZ1gDuLw0pNoOdyw==/info
ToolTopia.com
IN_STOCK ( In stock )
Free Shipping
Fabricates push-connect flares found on transmission cooler, fuel and some brake lines Patent pending Hydra-flare hand operated  hydraul ic ram generates the power necessary to produce proper fitting ends Includes custom carrying casePush-Connect Flaring Tool Set includes: Hydra-flare assembly, 5/16 adapter, 5/16 die set, 3/8 adapter, 3/8 die set. 
More

GearWrench Exhaust Pipe...

$96.29
Sears GearWrench Exhaust Pipe Expander (1-13/16 in. to 2-1/2 in.)
+ $6.99 shipping
/gearwrench-exhaust-pipe/XQuDQ24nNTcBuGw5ICvHvw==/info
Sears
IN_STOCK ( In stock )
This tool is used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, elimiting exhaust leaks. The hex end allows for the use of a combition wrench to remove clamp grooves or small imperfections or an impact wrench to expand pipes. Imperfections are forced owtward rather than forward, elimiting possible damage to component parts. No holding fixture is necessary. 1-13/16 in. - 2-1/2 in. (46 to 63.5mm) Heavy-duty tailpipe expander.
More

Superior Tool 17515...

$22.93
Sears Marketplace Superior Tool 17515 Professional Pipe Flaring Tool
No Shipping Info
/superior-tool-17515/zA43QEYgt3aHFFWyQtV37g==/info
Sears Marketplace
IN_STOCK ( In stock )
Professional Pipe Flaring Tool, Flares All Standard Sizes Of Soft Copper, Brass & Aluminum Tubing, 3/16 To 5/8 OD, Self-Centering Yoke Of Shockproof Tempered Malleable Steel Makes SAE 45°ree. Flare Joints Without Splitting Or Cracking, Hardened, Super Smooth Cone, Long Handle For Added Leverage, Large Wing Nuts Permit Easy, Positive Locking On The Tubing, Pouched, Made In USA.
More

Beta Tools 94/S6, 6 Piece...

$130.99
Pegasus Auto Racing Supplies Beta Tools 94/S6, 6 Piece Flare Nut Wrench Set, Metric
No Shipping Info
/beta-tools-94s6-6-piece/m3XSODSXYOlcK0NLzKqilg==/info
Pegasus Auto Racing Supplies
IN_STOCK ( In stock )
Beta Tools 94/S6, 6 Piece Flare Nut Wrench Set, Metric
More

Superior Tool Professional...

$26.66
Sears Superior Tool Professional Flaring Tool
+ $6.99 shipping
/superior-tool/CwywyApesNZR0y4IsP86wQ==/info
Sears
IN_STOCK ( In stock )
Flares all standard sizes of soft copper, brass, or aluminum tubing (3/16 - 5/8 O.D.). Long handle for added leverage. Large wing nuts permit easy, positive locking on the tubing.
More

48 Bronze Pipe Wrench, 1ea -...

$1,003.69
Sharp-Tek Supply 48 Bronze Pipe Wrench, 1ea - Ampco Safety Tools 065-w-216
+ $6.99 shipping
/48-bronze-pipe-wrench/Ohsi-C_RVE2pOxZ_9qbDHQ==/info
Sharp-Tek Supply
IN_STOCK ( In stock )
Store not rated
48 Bronze Pipe Wrench, 1Ea - Ampco Safety Tools 065-W-216. Corrosion ResistantCorrosio n ResistantCorrosio n ResistantCorrosio n ResistantCorrosio n ResistantCorrosio n ResistantMade In The UsaMade In The UsaMade In The UsaMade In The UsaMade In The UsaMade In The UsaMade In The UsaMade In The UsaMost Tools Beryllium- FreeNon- MagneticNon- MagneticNon- SparkingNon- SparkingNon- Sparking
More

48 Aluminum Pipe...

$952.99
Sharp-Tek Supply 48 Aluminum Pipe Wrench5capacity, 1ea - Ampco Safety Tools W-216al
+ $6.99 shipping
/48-aluminum-pipe/d-yDpooWfb3E5xj4r9bq3w==/info
Sharp-Tek Supply
IN_STOCK ( In stock )
Store not rated
48 Aluminum Pipe Wrench5Capacity, 1EA - Ampco Safety Tools W-216AL. Corrosion Resistant|Corrosi on Resistant|Corrosi on Resistant|Corrosi on Resistant|Corrosi on Resistant|Corrosi on Resistant|Made In The Usa|Made In The Usa|Made In The Usa|Made In The Usa|Made In The Usa|Made In The Usa|Made In The Usa|Made In The Usa|Most Tools Beryllium- Free|Non- Magnetic|Non- Magnetic|Non- Sparking|Non- Sparking|Non- Sparking
More

Ridgid Flaring Tools - 23337

$141.14
Shoplet.com Ridgid Flaring Tools - 23337
Free Shipping
/ridgid-flaring-tools/mQ6U-zsO6eWDuJ6AW3z0cQ==/info
Shoplet.com
IN_STOCK ( In stock )
Free Shipping
All flaring tools listed are recommended for soft materials such as aluminum and soft copper. No. 454W, No. 455, and No. 375 will also flare steel, stainless steel, hard copper, and brass. No. 458R and No. 377 will flare steel, stainless steel, hard copper, and brass thru wall thickness of .035 inches. No. 345 is a precisioin designed tool for producing 45 flares in soft copper. brass. aluminum, and mild-steel tubing. A hardened, smooth cone provides fast, 45 flares either single or double lap. A single clamp screw provides for easy clamping and removal of tubing.
More

Parflare Mft-04 Manual...

$122.72
Zoro Parflare Mft-04 Manual Flaring Tool,ptfe, Hdpe,flare
Free Shipping
/parflare-mft04-manual/u3oQBFEcsL0W554jpVDbQQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Manual Flaring Tool, Flare Type 45 Degrees , Body Material PTFE/HDPE, Connection Type Flare, Tube Size 1/4 In., Temp. Range -
More

Lisle Tools Pneumatic Exhaust...

$83.02
eBay Lisle Tools Pneumatic Exhaust Pipe Stretcher 34400
+ $10.91 shipping
/lisle-tools-pneumatic/FJS4kFzmtWwJDGn-vMa2gA==/info
eBay
IN_STOCK ( In stock )
Exhaust / Tailpipe Stretcher Stretches All Pipe Including Stainless Steel. Use with an impact wrench to quickly stretch pipes. Two collet sets fit pipes from 1 5/8 to 2 7/16. Can be used on the car.eBay Inventory Software and eBay Automated Listing Powered By:
More

Pipe-Flaring-Tool s - 45...

$179.87
Sears Marketplace Pipe-Flaring-Tool s - 45 Flaring & Swaging Kit - 1
No Shipping Info
/pipeflaringtools-45/QMcIlDjIntsqR5zOidKLnw==/info
Sears Marketplace
IN_STOCK ( In stock )
Product Details Ideal for use in close quarters Two bars included cover 9 sizes Swivel-type swaging adapters and flaring cone are hardened steel chrome-finished for easy operation Self-centering, slip-on forged steel yoke Flares 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 and 3/4 O.D. Technical Details Part Number: 275-FS Item model number: 275-FS Item Package Quantity: 1 Product Description Imperial 275-FS Flaring and Swaging Tool 45 Degree for 1/8 to 3/4 SKU: ADIB000LDFVBE
More

Ridgid 41295 Grey 454-W...

$278.92
FaucetDirect. com Ridgid 41295 Grey 454-W Flaring Tool. 45- SAE-Nominal Water Tube. 3/8, 1/2, 3/4, 1 Sizes. 41295
Free Shipping
/ridgid-41295-grey-454w/MGBs_hgNgImlRyxtc30_Fg==/info
FaucetDirect. com
IN_STOCK ( In stock )
Free Shipping
454-W Flaring Tool.  45- SAE-Nominal Water Tube.  3/8, 1/2, 3/4, 1 Sizes. Features: This precision tool provides smooth, uniform flares with minimum effort. The feed screw handle turns easily, doing the work for you. Hardened steel flaring cone, eccentrically mounted in needle bearings, produces rolling action for even metal flow, giving uniform flare walls without galling.
More

Superior Tool 1/2 - 1 Pipe...

$221.39
Sears Superior Tool 1/2 - 1 Pipe Threader Kit (3 Dies)
Free Shipping
/superior-tool-12-1/YW_gfi8mkwj-27ucp22lgg==/info
Sears
IN_STOCK ( In stock )
Free Shipping
These hand ratchet pipe threader kits provide the lightest thread starting and cutting available. The ratchets are made of a lightweight durable aluminum. Set of 6 dies.
More

Pipe End Shaper

$37.52
Sears Marketplace Pipe End Shaper
No Shipping Info
/pipe-end-shaper/sUZ2NVwq5OLsrBu2LLQjYQ==/info
Sears Marketplace
IN_STOCK ( In stock )
The Lisle 32000 rounds out exhaust pipes that are crushed or bent. Also reshapes pipes bent or flared out by placing big end over pipe. Range is 1 1/2 - 3 5/8 (38.1 - 92mm).
More

Atd 5483 Master In-line...

$104.27
eBay Atd 5483 Master In-line Flaring Tool Kit
Free Shipping
/atd-5483-master-inline/niBbYCN_1m11-S4C5GHx3A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
ATD Tools Master In-Line Flaring Tool Kit part #: ATD-5483 • Unique design locks the adapters, cone and tube in a perfect line with less risk of breaking adapters.• The clamp and setscrews put pressure directly over the tube reducing the chance of the tube slipping from the clamp. This increases the overall life of the clamp by not wearing down the teeth inside from repeating slipping.• The slender, low profile design of this tool allows the user to make flares on the vehicle and in tight
More

Double/bubble Flaring Tool...

$119.19
eBay Double/bubble Flaring Tool Kit Kdt41880 Brand
Free Shipping
/doublebubble-flaring/WsnE_XvShpTzBXO8nN_CcQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Double/Bubble Flaring Tool Kit KDT41880 BRAND NEW! International Buyers: All electric tools and cordless tool chargers are standard USA voltage (120 Volt) unless otherwise stated in listing.Features and Benefits Complete Double and Bubble flaring tool assortment Slots on yoke firmly engage with bar assembly Include corresponding adapters for forming double flares Forged alloy steel and through hardened Storage case with full instructions Precisely flares tubing up to 0.040 wall thickness to SAE
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.sp6-21623