electrovoice electro voice cps 2 4 400w 4ohms per ch power amp d170263

Specifications: Transmission Frequency ISM 2,400~2,485 MHz Modulation mode FM Antenna type Camera: Omni & Receiver: Directional Transmission Distance 100m Antenna Port 50ohm SMA Receiving Sensitivity -85Dbm Vided Output level 1Vp-p@75ohm Audio output level 1Vp-p@600ohm Screen size 7.0 inch Power supply Dc12v 1.5A Camera Imaging Sensor CMOS CMOS Total Pixels 628 x 582 (PAL) , 510 x 492 (NTSC) View Angle PA 62 degree NTSC 46 degree Minimum Illumination 1.5Lux/F1.5 Consumption Current 80mW Power Supply DC 5V 1A Night Vision Range 5M Receiver Receiving Sensitivity -85dBm Video Standard 16:9 LCD Size 7inch LCD Resolution 480 x 320 Active Area 49.2mm x 38.142mm Dot Pitch 0.1025mm x 0.163mm Illumination 250 cd/m3 Consumption Current DC 12V 700mA Package includes: 1 x... Less

CPS-2T Rackmount Stereo Power Amplifier (330W/Channel @ 8 Ohms), Stereo and Bridged Modes, Low-Z and 25/70.7/100V Operation, XLR and Phoenix Inputs, Direct and Isolated Phoenix Outputs, Dual Cooling Fans, Protection Circuitry

With just the touch of a button, the Power Lift Workstation is easily adjusted to accommodate students' varying needs. In just seconds, you can change the height from 28 to 40.  Students will have plenty of space to conduct science experiments on the durable epoxy resin or phenolic resin (see below) tabletop. Two hooks mounted under the work surface hold up to four book bags, and six GFI protected electrical outlets provide power. The base is constructed of powder-coated steel and oak veneer with a chemical resistant finish.  Key Features Power button for easy height adjustment Workspace for four students Chemical and heat resistant tabletop (see below) Six GFI AC electrical receptacles Specifications Base material: Power-coated steel and oak veneer Tabletop... Less

CPS 2.4 Rackmount Stereo Power Amplifier (400W/Channel @ 4 Ohms), Rackmount Design, Class-H Design, Highly Efficient, Low Heat Generation

EV Electro Voice CPS2.6 Power Amplifier 2x 600 Watts 4-Ohm CPS Amp NEW Item Sku# ele:CPS2.6 Package Contents: EV Electro-Voice CPS2.6 Power Amplifier, 2 X 600 Watts At 4 Ohms NEW Description Specs Media Warranty E.V. Power amplifier, 2 x 600 watts at 4 ohms, 2 RU, XLR/Phoenix type inputs, barrier strip outputs, THX approved CPS two-channel amplifiers provide flexibility and reliable audio performance for the professional installation business. Designed for the contract

Sangoma D150-BOX-400 Voice Transcoding Board The Sangoma D150-BOX-400 is a voice transcoding board that converts simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting latency or using up precious host CPU resources. The card allows up to 400 channels of any-to-any voice codec conversion, with unmatched quality. Sangoma D150-BOX-400 Features Up to 400 transcoding sessions Integrated Ethernet port (100 Mbps) for media flow in and out Allows a deployment option where host-based processing is restricted and the small form-factor of appliances limits the addition of PCI cards Boxed metal enclosure with external power supply Field upgradeable No licensing fees Reduces host CPU load Simple API for application integration Compatibility... Less

The ZXA1-Sub is designed to provide the ultimate combination of portability, performance, and power in a lightweight, stylish, small-format package.

The Electro-Voice ZXA5 is a bi-amplified active loudspeaker with 1000W for its 15 LF Transducer and 250W for its ND2 2 Voice Coil. Besides its unparallelled power-to-weight ratio, the Electro-Voice ZXA5-60ZW disperses sound at 60x60° coverage for long throw and cluster applications. A selectable 100Hz high pass is available for using this speaker with subwoofers.

Designed to give you power and performance beyond the scope of other small-format loudspeakers, Electro Voice ZLX-12P Powered Loudspeakers are the standout among speakers designed for smaller-venue sound reinforcement or stage-monitoring.

CP1200 - 2-Channel Rack-Mount Power Amplifier (400W Per Channel into 4 Ohm Stereo)

The Electro-Voice ZXA5 is a bi-amplified active loudspeaker with 1000W for its 15 LF Transducer and 250W for its ND2 2 Voice Coil. Besides its unparallelled power-to-weight ratio, the Electro-Voice ZXA5-60ZW disperses sound at 60x60° coverage for long throw and cluster applications. A selectable 100Hz high pass is available for using this speaker with subwoofers.

Subwoofer Features:12in Single 2 Ohm W3v3 Series SubwooferPower Handling:Peak: 1000 WattsRms: 500 Watts Recommended Power Range: 100-500 Watts Impedance: Single 2 OhmsMineral- filled Polypropylene Upper Cone WithA Metallic Jl Audio Medallion Logo Gives The W3's A Whole New, Classy And Sophisticated LookNbr (nitrile Butadiene Rubber) SurroundDma- optimized, Long Linear Excursion Capability To Virtually Eliminate Distortion And Increase Sound OutputPerform Outstanding In Compact Sealed Or Ported EnclosuresDma (dynamic Motor Analysis) Modeling To Deliver Unsurpassed Dynamic Stability And Low-distortion Operation Within Intended Power RangeElevated Frame-cooling Creates A Pathway For High-velocity Air To Flow Directly Across The Top-plate And Onto The Voice CoilVented Reinforcement Collar... Less

CP4000S - 2-Channel Rack-Mount Power Amplifier (1500W Per Channel into 4 Ohm Stereo)

Have Questions or Not Seeing the Deal you want? Call us Now: 800-248-7540 Electro-Voice CPS2.6-II Power Amplifier - 2-Channel - 2 x 500W @ 4 ohms BRAND NEW - Unopened item. Full Manufacturer Warranty Hassle Free 30 Day Returns Authorized Dealer Check out our Pro Account for our LOWEST Price:Electro-Voic e CPS2.6-II Or Re-Seller's Apply for a Wholesale Account Here New CPS two-channel amplifiers provide flexibility and reliable audio performance for the professional installation business. Designe

The RE-2 Wireless product is available in eleven different system configurations packed in a hard plastic carrying case. The systems include transmitters and micriphones as indicated. Whether you're performing at the local rock club, lecturing at a corporate seminar, or speaking in a house of worship, the Electro-Voice RE-2 brings ease-of-use, clear sound, and clean channels to wireless.

P3000 Precision Series Power Amplifier, 3RU, 1400 Watts @ 4 Ohms, Solid Steel Chassis, Filtering & Limiting Circuitry, Load Protection Circuitry, Front LEDs & Level Controls, Neutrik Speakon Speaker Outputs, 3-Speed Fan, Front-Mounted Rack Handles, Rugged Construction, Large Toroidal Transformer

Comprised of dual 6-inch LF drivers and a 1-inch Ti/waveguide, the EVID 6.2 is perfect for applications that require exemplary audio and the capability to fill large areas with sound. Additionally, the flexible Strong-Arm-Mount? (SAM?) system provides the versatility to accommodate any installation challenge. EV's unique 6-inch dual woofer design delivers crisp and clean program for the utmost in listening experience regardless of the location. Great for larger areas that demand higher SPL levels, the 6.2 delivers the outstanding, full bass output required for shopping malls, stadiums, airports, etc. Specifications: Frequency Response (-10db): 62Hz-20kHz. Power Handling: 300W Cont. Prog./600W Peak. Sensitivity: 94dB, 1W, 1m. Impedance: 8 Ohms. Max SPL: 118dB. Horizontal Coverage:... Less

CP2200 - 2-Channel Rack-Mount Power Amplifier (800W Per Channel into 4 Ohm Stereo)