electrical tester

Product Information: Fluke T5-600 Voltage, Continuity and Current Digital Electrical Meter lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.Fluke 600V Voltage, Continuity and Current Tester includes: 4 mm detachable probes, Instruction sheet. Features:#149;... Less

INCLUDES: • (1) Meter • batteries FEATURES: • Three ways to detect ac/dc voltage: light, sound, and vibration • GFCI trip and continuity beeper • Built-in flashlight • Solid-state tester design • CAT IV 600 V, CAT III 1000 V rated Safer than traditional solenoid testers and fully compliant with NFPA 70EThe T+PRO Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers: Three ways to detect ac/dc voltage: light, sound, and vibration Added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KΩ, as well as a backlit LCD display for easier viewing... Less

The Fluke T5-H5-1AC II Kit is a three-piece kit that contains the Fluke T5-1000 voltage, continuity, and current tester; the Fluke 1AC II non-contact voltage detector; and a holster.The Fluke T5-1000 tester measures VAC and VDC with precise digital resolution and has a range of 1000 V RMS, with resistance displayed to 1000Ω. It has a continuity beeper and probe tips customized to national electrical standards. The test leads stow into the back of the tester and can be used with Fluke accessory test clips (not included). The tester measures 30.5 x 51 x 203 mm, weighs 300 g, and runs on two AA zinc chloride batteries. It has a safety rating of 1000V Category III, 600V Category IV rated.The Fluke 1AC II VoltAlert Voltage Detector is a pen-style, pocket-sized non-contact voltage detector that... Less

Contains continuity tester with 36 lead & light indicator UL listed circuit analyzer for use in 110-125V AC circuits UL listed voltage tester with 90-300V AC/DC capacity

Also known as: AOE-6042, ASO-6042, ASO6042; Designed with highest quality and versatility in mind. Interprets data from charging/starting system on easy to read LED display voltmeter and ammeter. Also shows +/- amps for easy diagnosis of current leakage problems. The 500 amp, carbon pile variable load capability, provides accurate load testing for up to 1,000 CCA batteries. A great time-saver for testing electrical systems on 12, 12/24 and 24 volt vehicles.Extra Safety Features: Coated circuit board prevents damage and meter inaccuracy due to moisture and dirt Circuits protected against reverse voltage due to incorrect hook-up Load-On light indicates the load is activated Defective diode indicator warns alternator output diodes or GM diode trio has gone bad.Other Features: Easy to read... Less

Features and Benefits: Electrical tester with OpenJaw™ current The T5 electrical tester lets you check voltage, continuity and current with one compact tool All you have to do is select volts, ohms, or current and the tester does the rest OpenJaw™ current lets you check current up to 100A - without breaking the current Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch Detachable SlimReach™ test probes are customized for national electrical standards. The test leads accept optional accessories such a clips and specialty probes.  

Digital Display for Voltage, Current and Timer at Same Time; Automatic FAIL Indicator of Alarm Lamp and Buzzer; 9 Pin Remote Control for START, RESET; Includes: 1 - Power Cord; 1 - Instruction Manual; 1 - Test Lead set

The Fluke 5320A Multifunction Electrical Tester Calibrator is an accurate, flexible instrument that allows you to calibrate many different types and models of electrical testers efficiently and effectively.

Electrical Tester Kit, Includes Electrical Tester (G0869705), Voltage Detector (G2002104), Batteries, Test Lead Strap and Instructions

The Amprobe GP-2A ground resistance meter measures earth ground resistance, soil resistivity, and noise voltage to evaluate the safety and integrity of electrical systems. The meter has a backlit digital LCD screen that measures 73 x 65mm and includes an autoranging function that selects the appropriate measurement type automatically. The unit automatically takes voltage and resistivity measurements. The internal memory stores up to 999 readings for later download using the included USB cable and software that can be downloaded from the Amprobe web site. The tester has an auto-off function that turns it off after 3 minutes of idle time. It is powered by six alkaline or rechargeable AA batteries, which provide enough power for approximately 500 tests. The GP-2A is designed for use by... Less

The Three-Terminal Ground Resistance Tester is the economical choice for electrical contractors, plant electricians, telephone and CATV technicians making routine ground resistance tests on single electrodes and other simple grounding systems.

Safer than traditional solenoid testers and fully compliant with NFPA 70EThe T+PRO Electrical Testers offer all the functionality that electricians look for in volt meters and voltage and continuity testers: Three ways to detect ac/dc voltage: light, sound, and vibration Added functionality of a GFCI trip and continuity beeper, plus the convenience of a built-in flashlight The T+PRO Electrical Tester comes with a rotary field indicator for troubleshooting three-phase systems, resistance measurement to 9.99 KΩ, as well as a backlit LCD display for easier viewing Added functionality available only on the T+PRO: Backlit LCD display for easier viewing Display resolution of 0.1 V, ideal for troubleshooting low-voltage lighting Resistance (Ohms) to 9.99 kOhms Rotary Field Indication Display... Less

Brand New!Features A Powerful Magnetic Disconnect That Sticks To Any Metallic Ground or Test Point Fits Most Digital Multi-meters and Hand Held Scopes Great For Automotive, Marine, Small Engine, HVAC Industrial Technicians Eliminates The Need To Hold Probes While Monitoring A Signal Includes:Pair Mag Leads Pair Interconnect Leads Pair Back Probe Pins Pair Crocodile Pins Pair Alligator Clips Pair Long-Reach Grabber Jaw Clips Pair Hook/Pin Style Wire Piercing Clips Pair “Bed of Nails” Wire Pi

Have Questions? Frequently Asked Questions | Contact Us | Store Policy Stant Tester Pressure W/Case 12270 OUR SKU#: IPH1001 | MPN: Condition Brand New Shipping Free Shipping Leaves warehouse within 24 hours With a transit time of 1-5 business days Standard Ground (e.g. UPS, FedEx).Please note that this product cannot be shipped to Alaska, Hawaii, or Puerto Rico. We apologize for the inconvenience. Product Details Features and Benefits: Allows you to test today's cars higher pressure cooling sys

Tests for six common wiring conditions Tests for open grounds, open hots, open neutrals and reversed polarity Wraparound indicator lights and status chart 110-120V AC c ETL us listed

System Tester, Electrical, 12 Voltage Range, Works With 12 Volt Automotive Type Batteries, 100 To 1500 Cold Cranking Amps, Lcd Display, Height 35 In, Width 26 In, Depth 18 In, Includes Connector Cables, Internal Rechargeable Battery, Battery Charger, And Instructions