Category

Tools and Accessories
Showing results for "electric motor pulleys"
Results 1 - 40 of 1500+

DAYTON 31KY22 Electric Winch,...

$1,509.77
Zoro DAYTON 31KY22 Electric Winch, 2.7HP, 12VDC
Free Shipping
/dayton-31ky22-electric/IyCU-tvTbMNJSsyVo8Fhlw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Electric Winch, Voltage Rating 12VDC, Motor HP 2.7, Gear Type 1Stage Planetary Gear, 1st Layer Line Pull 12,500 lb., Full Load Line Speed 3.2 fpm, Full Load Amps 320, Clutch Release Yes, Clutch Type Freespooling, Pulley Block No, Included Rope Dia. 13/32 In., Included Rope Length 95 ft., Mechanical Brake Yes, Overall Length 2413/16 In., Overall Width 81/2 In., Overall Height 1013/32 In., No Load Line Speed 14 fpm, Gear Ratio 520:1, 1st Layer Line Speed 3.2 fpm, Rope Material Wire
More

LEESON Instant Reversing...

$344.99
Northern Tool LEESON Instant Reversing Electric Motor - 1/2 HP, 115V, 1,625 RPM, Model 100704
+ $13.49 shipping
/leeson-instant-reversing/962s8jQA4KNjomh11LbjJQ==/info
Northern Tool
IN_STOCK ( In stock )
This dependable 1/2 HP LEESON Instant Reversing Electric Motor is specially designed to help power 'instant- reversing' parking gates, mechanical doors, slide gates, hoists and other equipment requiring moderate starting torque and instant reversing capabilities. Manual Overload Protection Yes, Rotation Direction RCW, Volts 115, HP 1/2, Amps 4.1, Motor Phases 1, Frame Type S56C, Open Drip Proof Housing Yes, Capacitor Run No, Shank Diameter in. 5/8, Reversible Yes, Resilient Base Yes, Hertz 60, UL Yes, CSA Yes, Rated RPM 1,625, Capacitor Start Yes, Shank Length in. 2.125. Instant 'plug-reversing' with simple three-wire connection Permanent split capacitor design offering low inrush and full load amps Manual reset overload protector Starting torque is approx. 150 of full load Not suitable... Less
More

LEESON Reversible Electric...

$329.99
Northern Tool LEESON Reversible Electric Motor - 3/4 HP, 1800 RPM, Model 100008.00
+ $18.49 shipping
/leeson-reversible/Dz5-UgTfR9Eml7SUyoXk2w==/info
Northern Tool
IN_STOCK ( In stock )
This LEESON reversible 3/4 HP general purpose motor has NEMA frame #S56, and rigid base. For use where water and dust exposure is minimal. Ideally suited for use on pumps, compressors, blowers, fans and other standard industrial applications. U.S.A. Auto Overload Protection No, Volts 115/208-230, Shank Length in. 1 7/8, Shank Diameter in. 5/8, Manual Overload Protection No, Frame Type NEMA S56, Capacitor Start Yes, Amps 5.4 at 230V, Rigid Base Yes, HP 3/4, Motor Phases Single, Rated RPM 1,800. Durable rolled steel construction NEMA design B performance Meets or exceeds NEMA service factors Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified Service Factor 1.25. Model Number: 100008
More

Leeson Reversible Electric...

$289.99
Northern Tool Leeson Reversible Electric Motor - 3/4 HP, 3450 RPM, Model 100053.00
+ $17.49 shipping
/leeson-reversible/3aIERhcaqJ1OVbb1VRagUg==/info
Northern Tool
IN_STOCK ( In stock )
This LEESON pressure washer motor provides owners with a strong and durable motor that can be applied in hot or cold pressure washer applications. Motor is ideal for use where minimum starting and running amperages are required. Volts 115/208-230, HP 3/4, Capacitor Start Yes, Reversible Yes, Rated RPM 3,450, Manual Overload Protection Yes, Frame Type NEMA S56, Motor Phases Single, Amps 4.8 at 230V, Rigid Base Yes. Double shielded ball bearings are pre-lubricated with a special formulation for moisture resistance and provides extra long life, while allowing operating temperatures ranging from -20F to +350F Extra-heavy varnish to provide additional protection High-efficiency, energy-saving designs Low vibration operation due to a dynamically balanced rotor High-efficiency, reduced amperage... Less
More

Kreg DK1460 Replacement...

$349.99
Factory Authorized Outlet Kreg DK1460 Replacement Leeson 1 1/2HP Electric Motor DK3100, DK1100 FE (motor only)
Free Shipping
/kreg-dk1460-replacement/8Iv7QQBWvFzHu4S_zykLyA==/info
Factory Authorized Outlet
IN_STOCK ( In stock )
Store not rated
Free Shipping
Kreg gives you the perfect replacement engine for the DK3100 and DK1100FE with this 1-1/2 HP Electric Replacement Motor (DK1460).The Kreg DK1460 1-1/2 HP Electric Replacement Motor for DK3100 and DK1100FE: * 1-1/2 HP * Works with Kreg DK3100 and DK1100FESpecifica tions: * Weight: 50.0 * Horsepower: 1 1/2Includes: * One (1) 1-1/2 HP Electric Replacement Motor Kreg gives you the perfect replacement engine for the DK3100 and DK1100FE with this 1-1/2 HP Electric Replacement Motor (DK1460).
More

1760 LB Mini Electric Wire...

$189.99
Walmart.com 1760 LB Mini Electric Wire Hoist Remote Control Garage Auto Shop Overhead Lift
Free Shipping
/1760-lb-mini-electric/xNufVoz56U9KcUdDccwFCg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
SDT 1760 LBS 800 KGS Mini Electric Wire Hoist with 110v Motor Remote Controlled for Garage Auto Shop Overhead Crane Lift This electric hoist features a durable braided, anti-twist, high carbon steel cable, roughly 40 ft & 1/8 in diameter. SDT- EWH1760 electric hoist lifts up to 880 lbs with a single line, or 1760 lbs with a double line lift. It lifts at a rate up to 40 FPM using single line, or 20 FPM using double line. With a 5 1/2' corded remote, you can power your load up and down from a safe distance, making it the perfect electric hoist for any shop or automotive garage and loading heavy equipment or removing small engines. Single line lift: 880 pounds, speed of 33 ft per minute, 40 ft height Double line lift: 1760 pounds, speed of 16.5 ft per minute, 20 ft height Durable braided... Less
More

Leeson Reversible Electric...

$339.99
Northern Tool Leeson Reversible Electric Motor - 1 HP, 1725 RPM, Model 110004
+ $20.49 shipping
/leeson-reversible/2cgde2JdJzbBC4yg0prjbA==/info
Northern Tool
IN_STOCK ( In stock )
This Leeson reversible 1 HP single phase general purpose motor has 115/208-230 Volts and 1725 RPM. For use where water and dust exposure is minimal. Ideally suited for use on pumps, compressors, blowers, fans and other standard industrial applications. U.S.A. Rigid Base Yes, Rated RPM 1,725, Volts 115/208-230, HP 1, Shank Diameter in. 5/8, Capacitor Start Yes, Shank Length in. 1 7/8, Reversible Yes, Motor Phases Single, Frame Type NEMA 56. Durable rolled steel construction NEMA design B performance Exceeds NEMA service factors - 1.15 Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified. Model Number: 110004
More

LEESON General Purpose...

$349.99
Northern Tool LEESON General Purpose Electric Motor - 2 HP, Model 121636
+ $30.99 shipping
/leeson-general-purpose/_wgT5RYW_MCLxyVg2gAdsg==/info
Northern Tool
IN_STOCK ( In stock )
This LEESON 115/208-230 Volt single-phase motor is designed for use where exposure to water and dust is minimal. Ideally suited for use on pumps, compressors, fans, blowers, conveyors, machine tools and other industrial applications. UL recognized/CSA certified. CSA Yes, Manual Overload Protection Yes, Volts 115/208-230, Rigid Base Yes, Amps 9.2 @ 230V, Motor Phases Single, Frame Type 145T, Rated RPM 1,800, Rotation Direction Clockwise or counter clockwise, HP 2, Hertz 60, UL Yes, Shank Diameter in. 7/8, Open Drip Proof Housing Yes, Capacitor Start Yes. Durable rolled steel construction Service factor 1.00 Double shielded ball bearings Continuous duty Thermally protected ratings Totally enclosed, fan cooled TEFC Manual overload protection Rigid Mount Capacitor start/Capacitor run for... Less
More

Leeson Reversible Electric...

$359.99
Northern Tool Leeson Reversible Electric Motor - 3/4 HP, 1725 RPM, Model 100005.00
+ $18.49 shipping
/leeson-reversible/7S18HqgyJsN5UHbqmJfPHA==/info
Northern Tool
IN_STOCK ( In stock )
This Leeson reversible 3/4 HP general purpose motor has NEMA frame #S56, and rigid base. For use where water and dust exposure is minimal. Ideally suited for use on pumps, compressors, blowers, fans and other standard industrial applications. U.S.A. Shank Length in. 1 7/8, Amps 5.4 at 230V, Capacitor Start Yes, Shank Diameter in. 5/8, HP 3/4, Frame Type NEMA S56, Volts 115/208-230, Rigid Base Yes, Manual Overload Protection Yes, Motor Phases Single, Rated RPM 1,725. Durable rolled steel construction NEMA design B performance Meets or exceeds NEMA service factors Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified Service Factor 1.25. Model Number: 100005
More

DAYTON 5W659 Electric Winch,...

$397.36
Walmart.com DAYTON 5W659 Electric Winch, 1/2HP, 115VAC
Free Shipping
/dayton-5w659-electric/W07Vg2CFLlDtnAxGu4nYaw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Electric Winch, Voltage Rating 115VAC, Motor HP 1/2, Gear Type 1-Stage Planetary Gear, 1st Layer Line Pull 1000 lb., Full Load Line Speed 13 fpm, Full Load Amps 10, Clutch Release No, Clutch Type None, Pulley Block Yes, Included Rope Dia. 5/32 In., Included Rope Length 45 ft., Mechanical Brake No, Overall Length 13-1/2 In., Overall Width 5-3/8 In., Overall Height 5-3/4 In., No Load Line Speed 23 fpm, Gear Ratio 123:1, 1st Layer Line Speed 13 fpm, Rope Material Wire Features Height (In.) : 5-3/4 Motor HP : 1/2 Width (In.) : 5-3/8 Wire Rope (Ft. x In.) : 45 x 5/32 Full Load Full Reel Line Speed : 24.0ft./min. Type Gearing : Planetary Voltage Rating : 115VAC Item : Electric Winch Length (In.) : 13-1/2 Full Load Amps : 10 Full Load Empty Reel Line Speed : 13.0 ft./min. Pulling Capacity Double... Less
More

Milwaukee® 6238-20 Deep Cut...

$279.00
Global Industrial Milwaukee® 6238-20 Deep Cut Ac/Dc Band Saw
No Shipping Info
/milwaukee-623820-deep/1lB9t1pdE0ccypxHypuULw==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee 6238-20 Deep Cut AC/DC Band Saw The new Deep Cut Band Saws deliver 2X more durability, best-in-class power at 11 Amps, revolutionary cut visibility and the industrys largest cut capacity at 5 by 5. These Band Saws still deliver on the heritage of long-term reliability and performance that make Milwaukee Band Saws the standard in industrial metalworking, but now feature a new, exclusive Job Site Armor Technology and all metal direct drive system that provide game-changing durability. The Job Site Armor Technology is made of a proprietary composite material and has crush zone barriers that provide long lasting rugged protection. The all metal direct drive gearing system delivers maximum tool life, while requiring less servicing than a chain drive. In addition, a gear protecting... Less
More

ELECTRIC MOTORS AND...

$121.50
Zoro ELECTRIC MOTORS AND SPECIALTIES UTBCF1701E56C Unit Bearing Fan Motor,1/86 HP
Free Shipping
/electric-motors-and/4UEvVeWGMuTqCkEZdpginQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Unit Bearing Motor, ECM, Totally Enclosed AirOver, 1/86 HP, 1700 Nameplate RPM, Frame NonStandard, Voltage 115, Hz 60, 1 Phase, Full Load Amps 0.12, Output Watts 4, Rear/Foot Motor Mounting Type, Thermal Protection Electronic, Insulation Class B, Unit Bearings, Frame Material Cast Iron, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CWLE, Overall Length 439/64 In., Motor Shaft Design Threaded, Includes Mounting Screws and Fan Nut
More

Leeson Electric Cast Iron 2.8...

$4.99
Walmart.com Leeson Electric Cast Iron 2.8 X 7/8 Single Groove Fixed Bore Pulley
+ $5.47 shipping
/leeson-electric-cast-iron/ZYY4ckqnV3DCBt-qAu5qgQ==/info
Walmart.com
IN_STOCK ( In stock )
Leeson Electric 2.8 X 7/8 Single Groove Fixed Bore Pulley made of Cast Iron Construction BK28X7/8 Pulley Specifications: 2.8 X 7/8 Single Groove Fixed Bore A/B Pulley 2.8 Outside Diameter 7/8 Fixed Bore Size Cast Iron Construction Leeson Part Number - BK28X7/8
More

LEESON Contractor Power Saw...

$559.99
Northern Tool LEESON Contractor Power Saw Electric Motor - 2 HP, 115/230V, 3600 RPM, Model 120997
+ $27.49 shipping
/leeson-contractor-power/VJS1j0j3gyD_pQcHs3QlZw==/info
Northern Tool
IN_STOCK ( In stock )
The 2 HP Leeson Contractor Power Saw Electric Motor is a powerful single-phase motor specially designed for use with woodworking equipment such as table saws with Delta UNISAW mounting including Delta motor #83-621. UL listed. CSA certified. Amps 11, Totally Enclosed Housing Yes, Reversible Yes, Rated RPM 3,600, Motor Phases 1, Open Drip Proof Housing No, Resilient Base No, UL Yes, Shank Length in. 1.75, Manual Overload Protection No, Hertz 60, Shank Diameter in. 3/4, Capacitor Run No, CSA Yes, Frame Type 143Y, Capacitor Start Yes, Rotation Direction Reversible, Volts 115/230, Rigid Base Special, HP 2, Auto Overload Protection No. Motor pivots on rod for belt tensioning Delta UNISAW mounting Totally enclosed, fan-cooled TEFC housing has an external fan to provide cooling by blowing air... Less
More

LEESON Pressure Washer Duty...

$569.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -3 HP, 230V, 3600 RPM, TEFC, Rigid Base, Model 116705
+ $31.99 shipping
/leeson-pressure-washer/ZlwZGkWaR_-ai2idv9dWJQ==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 3 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Shank Length in. 2, Totally Enclosed Housing Yes, Amps 14, Manual Overload Protection Yes, Reversible Yes, Volts 230, Auto Overload Protection No, UL Yes, Open Drip Proof Housing No, Rated RPM 3,600, Hertz 60, HP 3, Rigid Base Yes, Resilient Base No, CSA Yes, Shank Diameter in. 5/8, Frame Type 56H, Capacitor Start Yes, Motor Phases Yes, Capacitor Run Yes, Rotation Direction Reversible. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

ELECTRIC MOTORS AND...

$121.50
Zoro ELECTRIC MOTORS AND SPECIALTIES UTBCF1601E56C Unit Bearing Fan Motor,1/106 HP
Free Shipping
/electric-motors-and/EL6gnsdcyKNejVEsNfypGQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Unit Bearing Motor, ECM, Totally Enclosed AirOver, 1/106 HP, 1600 Nameplate RPM, Frame NonStandard, Voltage 115, Hz 60, 1 Phase, Full Load Amps 0.19, Output Watts 7, Rear/Foot Motor Mounting Type, Thermal Protection Electronic, Insulation Class B, Unit Bearings, Frame Material Cast Iron, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CWLE, Overall Length 439/64 In., Motor Shaft Design Threaded, Includes Mounting Screws and Fan Nut
More

Milwaukee® 6232-21 Deep Cut...

$299.00
Global Industrial Milwaukee® 6232-21 Deep Cut Variable Speed Band Saw Kit
No Shipping Info
/milwaukee-623221-deep/Ioo94Poz-MIxJPP8tQTxhQ==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee Deep Cut Variable Speed Band Saw Kit 6232-21 The new Deep Cut Band Saws deliver 2X more durability, best-in-class power at 11 Amps, revolutionary cut visibility and the industrys largest cut capacity at 5 by 5. These Band Saws still deliver on the heritage of long-term reliability and performance that make Milwaukee Band Saws the standard in industrial metalworking, but now feature a new, exclusive Job Site Armor Technology and all metal direct drive system that provide game-changing durability. The Job Site Armor Technology is made of a proprietary composite material and has crush zone barriers that provide long lasting rugged protection. The all metal direct drive gearing system delivers maximum tool life, while requiring less servicing than a chain drive. In addition, a gear... Less
More

STRONGARM SA12015AC Electric...

$479.03
Walmart.com STRONGARM SA12015AC Electric Winch
Free Shipping
/strongarm-sa12015ac/85mXnAOxi2v5E24GxNgn5g==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Electric Winch, Voltage Rating 115VAC, Motor HP 1, Gear Type Spur Gear, 1st Layer Line Pull 2700 lb., Full Load Line Speed 3.5 fpm, Full Load Amps 8, Clutch Release Yes, Clutch Type Freespooling, Pulley Block Yes, Included Rope Dia. 7/32 In., Included Rope Length 50 ft., Mechanical Brake Yes, Overall Length 11-3/8 In., Overall Width 8-13/16 In., Overall Height 8 In., No Load Line Speed 9 fpm, Gear Ratio 570:1, 1st Layer Line Speed 2 fpm, Drum Capacity for 1/4 In. Cable 68 ft., Rope Material Wire Features Drum Capacity for 1/4 In. Cable (Ft.) : 68 Height (In.) : 8 Motor HP : 1 Width (In.) : 8-3/4 Wire Rope (Ft. x In.) : 50 x 7/32 Full Load Full Reel Line Speed : 4ft./min. Type Gearing : Spur Voltage Rating : 115VAC Includes : Factory Installed Remote Control and Emergency Crank Handle Item... Less
More

LEESON Pressure Washer Duty...

$709.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 121465
+ $27.49 shipping
/leeson-pressure-washer/02A8NmHKlC7928nzR1OO8A==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Totally Enclosed Housing Yes, Shank Diameter in. 7/8, Motor Phases 1, Rigid Base Yes, Hertz 60, Reversible Yes, Volts 115/208-230, CSA Yes, Capacitor Run Yes, Auto Overload Protection No, Rotation Direction Reversible, Shank Length in. 2.375, Resilient Base No, Frame Type 145TC, Open Drip Proof Housing No, Rated RPM 1,800, Manual Overload Protection Yes, Capacitor Start Yes, UL Yes, HP 2, Amps 9.2. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for... Less
More

LEESON Pressure Washer Duty...

$439.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -1 HP, 115/208-230V, 1800 RPM, TEFC, Rigid Base, Model 120008
+ $22.49 shipping
/leeson-pressure-washer/0VVoPJ6kQgm4ZpOqLOCnIw==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 1 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Capacitor Run No, Shank Length in. 2, Totally Enclosed Housing Yes, Rigid Base Yes, Capacitor Start Yes, Rotation Direction Reversible, Rated RPM 1,800, Open Drip Proof Housing No, Amps 6.4, Hertz 60, Shank Diameter in. 7/8, Volts 115/208-230, CSA Yes, Auto Overload Protection No, UL Yes, Frame Type 143T, Manual Overload Protection Yes, Resilient Base No, Motor Phases 1, Reversible Yes, HP 1. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

2bk40h Cast Iron 3.95 Pulley...

$21.95
eBay 2bk40h Cast Iron 3.95 Pulley For Electric Motor 2 Groove
Free Shipping
/2bk40h-cast-iron-395/bOjFHJm5Yb3ewDQR3D2TrQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
As pictured: 2BK40H CAST IRON 3.95 PULLEY FOR ELECTRIC MOTOR 2 GROOVE …………………………………………… …………………………………………… …………………………………………… ……………………….... ***We have a limited quantity of all items, please buy now so it will not get away.*** **All items are sold as pictured. Please examine the photographs closely before making a purchase. If there are any questions, please message us.** *If ther
More

LEESON Pressure Washer Duty...

$379.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -3/4 HP, 115/208-230V, 1725 RPM, TEFC, Rigid Base, Model 110022
+ $19.99 shipping
/leeson-pressure-washer/0rgUPd8ckK55qiW01yaxDA==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 3/4 HP LEESON Pressure Washer Duty Electric Motor provides owners with a strong and durable motor that can be applied in hot or cold pressure washer applications. These motors are used where minimum starting and running amperages are required. CSA Yes, Frame Type 56, Reversible Yes, Totally Enclosed Housing Yes, Rigid Base Yes, Motor Phases 1, Hertz 60, Rotation Direction Selective CCW, Amps 5.4, Rated RPM 1,725, UL Yes, Manual Overload Protection Yes, Capacitor Run Yes, HP 3/4, Capacitor Start Yes, Shank Length in. 2 1/8, Volts 115/208-230, Shank Diameter in. 5/8. Double shielded ball bearings are pre-lubricated with a special formulation for moisture resistance and provides extra long life Allows operating temps ranging from -20F to +350F Extra heavy varnish to provide... Less
More

ELECTRIC MOTORS AND...

$121.50
Zoro ELECTRIC MOTORS AND SPECIALTIES UTBCF1551E56C Unit Bearing Fan Motor,1/62 HP
Free Shipping
/electric-motors-and/PK76f8oiZN02GMVWWDzgtg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Unit Bearing Motor, ECM, Totally Enclosed AirOver, 1/62 HP, 1550 Nameplate RPM, Frame NonStandard, Voltage 115, Hz 60, 1 Phase, Full Load Amps 0.30, Output Watts 12, Rear/Foot Motor Mounting Type, Thermal Protection Electronic, Insulation Class B, Unit Bearings, Frame Material Cast Iron, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CWLE, Overall Length 439/64 In., Motor Shaft Design Threaded, Includes Mounting Screws and Fan Nut
More

LEESON Pressure Washer Duty...

$539.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 3600 RPM, TEFC, C-Face with Base, Model 114995
+ $26.49 shipping
/leeson-pressure-washer/Kc2iZu08qZszq1HDU8pBBg==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Capacitor Start Yes, Frame Type 56HC, Rotation Direction Reversible, Auto Overload Protection No, Open Drip Proof Housing No, Shank Diameter in. 5/8, Manual Overload Protection Yes, CSA Yes, Volts 115/208-230, Rated RPM 3,600, Motor Phases 1, Reversible Yes, UL Yes, Hertz 60, Resilient Base No, Rigid Base Yes, Shank Length in. 2, Amps 9.2, Capacitor Run Yes, HP 2, Totally Enclosed Housing Yes. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

Electric Powered Rotating...

$17.99
GardenFun.com Electric Powered Rotating Motor (30 RPM)
+ $8.95 shipping
/electric-powered-rotating/qn6oMlyxFNKn5zN4y4XO9Q==/info
GardenFun.com
IN_STOCK ( In stock )
Store not rated
No wind for your spinner? Want your spinner indoors? Need something to spin a display? No problem.Simply attach your wind spinner to this handy Electric Powered motor and watch your decoration spin night and day. On/Off switch on side. Come with 50 inch cord to plug in the wall.A perfect 30 RPM spin speed at all times!
More

LEESON Pressure Washer Duty...

$399.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -1/3 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 116485
+ $19.99 shipping
/leeson-pressure-washer/OJk8L9vqj6A4ODXscg83yg==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 1/3 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Manual Overload Protection Yes, Shank Length in. 2, Rated RPM 1,800, Amps 3.2, UL Yes, CSA Yes, Totally Enclosed Housing Yes, Capacitor Run No, Open Drip Proof Housing No, Auto Overload Protection No, Shank Diameter in. 5/8, Rigid Base Yes, HP 1/3, Reversible Yes, Hertz 60, Motor Phases 1, Frame Type 56C, Capacitor Start Yes, Resilient Base No, Rotation Direction Reversible, Volts 115/208-230. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

LEESON Pressure Washer Duty...

$444.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -1 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 115879
+ $21.49 shipping
/leeson-pressure-washer/Pv0HtRuvjtQ6D7D04smRGw==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 1 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Capacitor Run No, Amps 6.4, Auto Overload Protection No, Rotation Direction Reversible, Shank Length in. 2, Totally Enclosed Housing Yes, CSA Yes, HP 1, Frame Type 56C, Shank Diameter in. 5/8, Capacitor Start Yes, Manual Overload Protection Yes, Motor Phases 1, Rigid Base Yes, Open Drip Proof Housing No, Hertz 60, Reversible Yes, UL Yes, Rated RPM 1,800, Volts 115/208-230, Resilient Base No. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

ELECTRIC MOTORS AND...

$121.50
Zoro ELECTRIC MOTORS AND SPECIALTIES UTBCF1701E56C Unit Bearing Fan Motor,1/57 HP
Free Shipping
/electric-motors-and/Z_prL-bNomfL9bmzpSQmkw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Unit Bearing Motor, ECM, Totally Enclosed AirOver, 1/57 HP, 1725 Nameplate RPM, Frame NonStandard, Voltage 115, Hz 60, 1 Phase, Full Load Amps 0.30, Output Watts 13, Rear/Foot Motor Mounting Type, Thermal Protection Electronic, Insulation Class B, Unit Bearings, Frame Material Cast Iron, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CWLE, Overall Length 439/64 In., Motor Shaft Design Threaded, Includes Mounting Screws and Fan Nut
More

LEESON Pressure Washer Duty...

$559.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 3600 RPM, TEFC, Rigid Base, Model 120395
+ $28.99 shipping
/leeson-pressure-washer/Xxl0QGoP7rqfQkQgXDJ51A==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Capacitor Run Yes, Frame Type 145T, Amps 10, UL Yes, CSA Yes, Capacitor Start Yes, Rigid Base Yes, Resilient Base No, HP 2, Motor Phases 1, Rotation Direction Reversible, Rated RPM 3,600, Shank Diameter in. 7/8, Open Drip Proof Housing No, Auto Overload Protection No, Shank Length in. 2.375, Manual Overload Protection Yes, Reversible Yes, Totally Enclosed Housing Yes, Hertz 60, Volts 115/208-230. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

WARN 2000DC Electric Winch,...

$144.30
Walmart.com WARN 2000DC Electric Winch, 1-3/5HP, 12VDC
Free Shipping
/warn-2000dc-electric/CGI8XO-r1xPydLABGBprWg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Electric Winch, Voltage Rating 12VDC, Motor HP 1-3/5, Gear Type Split Ring, 1st Layer Line Pull 2000 lb., Full Load Line Speed 4.4 fpm, Full Load Amps 83, Clutch Release Yes, Clutch Type Knob - Pull and Turn, Pulley Block No, Included Rope Dia. 3/16 In., Included Rope Length 35 ft., Mechanical Brake No, Overall Length 13 In., Overall Width 4 In., Overall Height 6 In., Series CMI, No Load Line Speed 7 fpm, Gear Ratio 153:1, 1st Layer Line Speed 7 fpm, Rope Material Wire Features Full Load Amps : 83 Item : Electric Winch Motor HP : 1-3/5 Voltage Rating : 12VDC Clutch Type : Knob - Pull and Turn Gear Ratio : 153:1 Overall Height : 6 Overall Length : 13 Overall Width : 4 Series : CMI Rope Material : Wire Clutch Release : Yes Pulley Block : No Mechanical Brake : No 1st Layer Line Pull : 2000... Less
More

LEESON Pressure Washer Duty...

$699.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 1800 RPM, TEFC, Rigid Base, Model 120867
+ $30.99 shipping
/leeson-pressure-washer/_fp6CopOFSReqkSW5Isa5g==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Totally Enclosed Housing Yes, Capacitor Run Yes, Hertz 60, Manual Overload Protection Yes, Resilient Base No, HP 2, Rated RPM 1,800, Motor Phases 1, Rotation Direction Reversible, Reversible Yes, Rigid Base Yes, UL Yes, Shank Diameter in. 7/8, Shank Length in. 2 3/8, CSA Yes, Capacitor Start Yes, Volts 115/208-230, Open Drip Proof Housing No, Auto Overload Protection No, Frame Type 145T, Amps 9.2. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for... Less
More

Milwaukee® 6232-20 Deep Cut...

$279.00
Global Industrial Milwaukee® 6232-20 Deep Cut Variable Speed Band Saw
No Shipping Info
/milwaukee-623220-deep/w_WyzB7OdQp9zg7uAitVLQ==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee 6232-20 Deep Cut Variable Speed Band Saw The new Deep Cut Band Saws deliver 2X more durability, best-in-class power at 11 Amps, revolutionary cut visibility and the industrys largest cut capacity at 5 by 5. These Band Saws still deliver on the heritage of long-term reliability and performance that make Milwaukee Band Saws the standard in industrial metalworking, but now feature a new, exclusive Job Site Armor Technology and all metal direct drive system that provide game-changing durability. The Job Site Armor Technology is made of a proprietary composite material and has crush zone barriers that provide long lasting rugged protection. The all metal direct drive gearing system delivers maximum tool life, while requiring less servicing than a chain drive. In addition, a gear... Less
More

LEESON Pressure Washer Duty...

$489.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -1 1/2 HP, 115/208-230V, 1800 RPM, TEFC, Rigid Base, Model 120009
+ $27.99 shipping
/leeson-pressure-washer/dsblVefw996Z_BZRHT8TPA==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 1 1/2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Amps 8.6, Rigid Base Yes, UL Yes, Auto Overload Protection No, Capacitor Start Yes, Shank Length in. 2.375, Open Drip Proof Housing No, Resilient Base No, Capacitor Run Yes, Frame Type 145T, Rated RPM 1,800, Hertz 60, CSA Yes, Totally Enclosed Housing Yes, HP 1 1/2, Manual Overload Protection Yes, Reversible Yes, Volts 115/208-230, Motor Phases 1, Rotation Direction Reversible, Shank Diameter in. 7/8. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for... Less
More

LEESON Pressure Washer Duty...

$549.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -2 HP, 115/208-230V, 3600 RPM, TEFC, Rigid Base, Model 110402
+ $25.99 shipping
/leeson-pressure-washer/gRj9413-KGR16j4fGAoTFg==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Open Drip Proof Housing No, Rated RPM 3,600, UL Yes, Manual Overload Protection Yes, Shank Length in. 2, CSA Yes, Volts 115/208-230, Rotation Direction Reversible, Amps 10, HP 2, Frame Type 56H, Motor Phases 1, Capacitor Start Yes, Resilient Base No, Shank Diameter in. 5/8, Capacitor Run Yes, Reversible Yes, Auto Overload Protection No, Rigid Base Yes, Totally Enclosed Housing Yes, Hertz 60. Double shielded ball bearings are pre-lubricated with a special formulation for moisture resistance and provides extra long life Allows operating temps... Less
More

LEESON Pressure Washer Duty...

$519.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -3/4 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 116487
+ $20.49 shipping
/leeson-pressure-washer/vDNkQU6VH96b-27iJJHXJQ==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 3/4 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Capacitor Run No, Rigid Base Yes, Volts 115/208-230, Resilient Base No, Shank Diameter in. 5/8, Manual Overload Protection Yes, Hertz 60, Rated RPM 1,800, UL Yes, Frame Type 56C, Capacitor Start Yes, Auto Overload Protection No, Amps 5.4, Totally Enclosed Housing Yes, Rotation Direction Reversible, HP 3/4, Open Drip Proof Housing No, Shank Length in. 2, CSA Yes, Motor Phases 1, Reversible Yes. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

LEESON Pressure Washer Duty...

$449.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -1/2 HP, 115/208-230V, 1800 RPM, TEFC, C-Face with Base, Model 116486
+ $19.99 shipping
/leeson-pressure-washer/zlGfiTdzw67i3AtKsiI0fA==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 1/2 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Shank Length in. 2, HP 1/2, Auto Overload Protection No, Resilient Base No, Frame Type 56C, Totally Enclosed Housing Yes, Capacitor Run Yes, Open Drip Proof Housing No, Reversible Yes, Motor Phases 1, Rigid Base Yes, Rated RPM 1,800, Amps 4.4, Manual Overload Protection Yes, UL Yes, Rotation Direction Reversible, Volts 115/208-230, Capacitor Start Yes, Shank Diameter in. 5/8, CSA Yes, Hertz 60. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

8066184 Motor Pulley 60 Hz

$21.96
Easy Appliance Parts 8066184 Motor Pulley 60 Hz
+ $7.49 shipping
/8066184-motor-pulley-60/H8yKS9WpDqUAdsb38XOjiw==/info
Easy Appliance Parts
IN_STOCK ( In stock )
Store not rated
We Give You The Lowest Prices On Dryer Parts. Order Today, Ships Today.
More

LEESON Pressure Washer Duty...

$339.99
Northern Tool LEESON Pressure Washer Duty Electric Motor -1 HP, 115/208-230V, 3600 RPM, 6.0 Amps @ 230V, Model M6C34FK78
+ $20.99 shipping
/leeson-pressure-washer/TLBW-jsDqoLkZ8QWgzLBDQ==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 1 HP LEESON Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. HP 1, Shank Diameter in. 5/8, Rigid Base Yes, Frame Type 56C, Auto Overload Protection No, Motor Phases 1, Volts 115/208-230, Manual Overload Protection Yes, Open Drip Proof Housing No, CSA Yes, Capacitor Run No, Reversible Yes, UL Yes, Amps 6, Capacitor Start Yes, Hertz 60, Rotation Direction Reversible, Shank Length in. 2, Totally Enclosed Housing Yes, Resilient Base No, Rated RPM 3,600. Double-shielded ball bearings are pre-lubricated with a special formulation for moisture resistance to provide extra long life Allows for operating... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355