Category

Tools and Accessories
Showing results for "electric hoof trimming tools"
Results 1 - 40 of 1500+

Amana Tool DT14842 Ditec...

$240.94
Toolstoday.com Amana Tool DT14842 Ditec Extended Trimming 14 x 84T x TCG Grind x 1 Inch Bore Saw Blade for MDF
Free Shipping
/amana-tool-dt14842-ditec/6VSoKoVkbbU2_f4XhwzC0w==/info
Toolstoday.com
IN_STOCK ( In stock )
Free Shipping
Ditec Extended Life Trimming Saw Blades for Cutting MDF
More

Amana Tool DT12962 Ditec...

$225.45
Toolstoday.com Amana Tool DT12962 Ditec Extended Trimming 12 x 96T x TCG Grind x 1 Inch Bore Saw Blade for MDF
Free Shipping
/amana-tool-dt12962-ditec/rz2UnmRRQcCI57ClIHFRbA==/info
Toolstoday.com
IN_STOCK ( In stock )
Free Shipping
Ditec Extended Life Trimming Saw Blades for Cutting MDF
More

Hoof Knife Sharpening File

$10.95
KV Supply Hoof Knife Sharpening File
Free Shipping
/hoof-knife-sharpening-file/3FgdrM_bsp_2zZeH1FaoUg==/info
KV Supply
IN_STOCK ( In stock )
Store not rated
Free Shipping
COOPER HORSESHOES & FARRIER TOOLS This tool is designed epecially to sharpen and hone Hoof Knives and similar tools. For best results, use a continuous motion from handle to hook. Also excellent for sharpening small knives, and other tools that need a keen, sharp edge. American pattern tooth type - etched file cut - 8 inches in length. Wear safety goggles to protect your eyes. Never use a file without a tight fitting handle.
More

LEESON Contractor Power Tools...

$349.99
Northern Tool LEESON Contractor Power Tools Electric Motor - 3/4 HP, Double-Shafted, 115/208-230V, 3600 RPM, Model 101782
+ $17.49 shipping
/leeson-contractor-power/4xcy7rYO55NbMnDmhG7RPg==/info
Northern Tool
IN_STOCK ( In stock )
The 3/4 HP Leeson Contractor Power Tools Electric Motor is a powerful single-phase motor specially designed for woodworking applications that require a double-shafted motor. UL listed. CSA certified. Capacitor Start Yes, CSA Yes, Frame Type 48Z, Auto Overload Protection No, Capacitor Run Yes, Motor Phases 1, Open Drip Proof Housing No, Hertz 60, HP 3/4, Manual Overload Protection No, Rotation Direction Selective CCW, Shank Diameter in. 1/2, Shank Length in. 1 1/2, Resilient Base No, Reversible No, Rigid Base Yes, Totally Enclosed Housing Yes, UL Yes, Volts 115/208-230, Amps 4.9, Rated RPM 3,600. Double shaft design Electronic starting switch for quick and easy starts High starting and breakdown torques Open drip-proof ODP housing allows for venting and prevents drops of liquid from... Less
More

Hoof Knife By Apex Tool Group

$9.49
Sears Hoof Knife By Apex Tool Group
No Shipping Info
/hoof-knife-by-apex-tool/6bydPRZl_p8o3oYFlNmQtA==/info
Sears
IN_STOCK ( In stock )
8 Narrw Rght Hoof Knife: Knife Hoof
More

Shoplet Select Replacement...

$74.52
Shoplet.com Shoplet Select Replacement Bag Trimming Blades Shptdprodeb3
Free Shipping
/shoplet-select/XYoxA_HSx8JLZFbsU_ByMQ==/info
Shoplet.com
IN_STOCK ( In stock )
Free Shipping
Shoplet select SHPTDPRODEB3 Replacement Bag Trimming Blades. Replacement Blades for trimming bags. Use these replacement trimming blades for taper stock numbers TDPRODHD, TDPRODSS and TDPRODWN. For replacement tape cutting blades, use stock numbers TDPRODEB1 or TDPRODEB2. Available in cases of 10.
More

Wood Handle For Diamond Hoof...

$7.29
Valley Vet Supply Wood Handle For Diamond Hoof Rasp
+ $7.00 shipping
/wood-handle-for-diamond/oHqq-xJ3CGIRx8Axrm6-ZQ==/info
Valley Vet Supply
IN_STOCK ( In stock )
Wood handle, designed to fit 14 Diamond Hoof Rasp #19822.
More

Tree Trimming Chainsaw...

$176.78
eBay Tree Trimming Chainsaw Extension Pole Bar Saw Chain Accessories Blade Electric
Free Shipping
/tree-trimming-chainsaw/SoMAMR8x1EsGbFM3ds-ZjQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
higherenergy store Tree Trimming Chainsaw Extension Pole Bar Saw Chain Accessories Blade Electric 12” arm extension Pruning chain saw Chain guard included Safe cutting on ground Steel teeth for holding while cutting Auto tension model Automatic chain oiler with indicator No kickback Can be used with or without extension pole 2 –year warranty 5-amp power source Weighs 20 lbs.I ship to the lower 48 states only. I cannot combine shipping and there is no local pick up. I cannot ship to P.O. box
More

Milwaukee® 1 Ton Electric...

$1,903.00
Global Industrial Milwaukee® 1 Ton Electric Chain Hoist - 15' Lift 115/230v, 1-Phase
No Shipping Info
/milwaukee-1-ton-electric/JfmYVXDKE_Qkvf0oWi67GA==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee 1 Ton Electric Chain Hoist - 15' Lift 115/230V, 1-Phase All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation. Single-phase, 115/230 voltage (AC), 16.0 amps at low voltage1 ton rated load, 15 ft. lift height, 16 ft./min. lifting... Less
More

LEESON Contractor Power Tools...

$349.99
Northern Tool LEESON Contractor Power Tools Electric Motor - 1 HP, 115/208-230V, 3600 RPM, Model 114216
+ $20.49 shipping
/leeson-contractor-power/IXhdCwS9X7KBaw7uIWFkCw==/info
Northern Tool
IN_STOCK ( In stock )
The 1 HP Leeson Contractor Power Tools Electric Motor is a powerful single-phase motor specially designed for woodworking applications that require a double-shafted motor. UL listed. CSA certified. CSA Yes, Frame Type 56Z, Hertz 60, Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, Open Drip Proof Housing No, Resilient Base No, HP 1, Manual Overload Protection No, Motor Phases 1, Shank Diameter in. 5/8, Totally Enclosed Housing Yes, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, UL Yes, Volts 115/208-230, Shank Length in. 1.875, Amps 6, Rated RPM 3,600. Electronic starting switch for quick and easy starts High starting and breakdown torques Open drip-proof ODP housing allows for venting and prevents drops of liquid from falling into the motor Rigid base... Less
More

Milwaukee® 1 Ton Electric...

$1,815.00
Global Industrial Milwaukee® 1 Ton Electric Chain Hoist 10' Lift 115/230v 1-Phase
No Shipping Info
/milwaukee-1-ton-electric/KRhRA5dyla2P91uisSMl3g==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee 1 Ton Electric Chain Hoist - 10' Lift 115/230V, 1-Phase All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation. The chain container/box comes separately. Single-phase, 115/230 voltage (AC), 16.0 amps at low voltage1 ton rated... Less
More

Lincoln Electric X-Tractor...

Free Shipping
3 stores Lincoln Electric X-Tractor 1GC Portable Smoke Extraction System, 120 Volt AC Single Phase, 50/60 Her... (K6521)
Fume Extractor, Filter Media 2.8 m2 (30 ft2), Air Flow 55/115 CFM, Sound Level dBA 74, Input...
More

Kreg 1-Spindle Electric...

$3,075.00
Max Tool Kreg 1-Spindle Electric Pocket Hole Jig Machine - DK1100-FE
Free Shipping
/kreg-1spindle-electric/PinPNdz2X1PRZeunaqYxkA==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
The DK1100 FE is a floor-standing electric, fully-automatic pocket hole boring machine. 110VAC is required to power the drill spindle of the machine and 100 psi of air pressure is needed to cycle the hold-down clamp and forward motion cylinder. The DK1100 series features a reliable, one-step drilling operation through a hardened steel drill guide to produce the pocket hole. The hole is round sided with a flat bottom that allows a screw head to seat flush in the bottom of the pocket and the hole to be plugged with wooden dowel. The DK1100 series are built to be extremely quiet for operator comfort and their simple design results in very fast drill bit changes.The Kreg DK1100-FE Features * Hardened steel drill guide to maximize drill bit life * One-touch, foot pedal operation * Swing stops... Less
More

Campbell/Diamond /Nichon Hoof...

$31.23
Hayneedle Campbell/Diamond /Nichon Hoof Nipper Multicolor - 026088
+ $5.99 shipping
/campbelldiamondnichon/hZ-HzasCOxOgdZ4z7JNuMg==/info
Hayneedle
IN_STOCK ( In stock )
Shop for Electrical Tools from Hayneedle.com! The Campbell/Diamond/ Nichon Hoof Nipper makes hoof clipping effective and easy. Constructed from high-quality materials, these extra long hoof clippers keep you out of harm s way while you re helping your animal. The easy-to-use handle is a lightweight eight ounces.About Bradley Caldwell, Inc.On February 1996, Caldwell Supply Company and New Holland Supply merged, and a new and unique approach to distribution was created. The result is Bradley Caldwell Inc., a company with more than 100 years of industry experience. Located in the Pocono Mountains of Eastern Pennsylvania, its service area covers 17 states and extends from Maine to Michigan to North Carolina. BCI is the only full-line distribution warehouse in the region, with more than 30,000... Less
More

Milwaukee® 1/2 Ton Electric...

$1,749.00
Global Industrial Milwaukee® 1/2 Ton Electric Chain Hoist - 15' Lift 115/230v, 1-Phase
No Shipping Info
/milwaukee-12-ton/T4RmhG-mw86BUh81r6TVYQ==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee 1/2 Ton Electric Chain Hoist - 15' Lift 115/230V, 1-Phase All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation. Single-phase, 115/230 voltage (AC), 9.8 amps at low voltage1/2 ton rated load, 15 ft. lift height, 16 ft./min... Less
More

Tanged Hoof Rasp 14

$11.49
Valley Vet Supply Tanged Hoof Rasp 14
+ $7.00 shipping
/tanged-hoof-rasp-14/wHDL9w86heJnyXuAPFk4tw==/info
Valley Vet Supply
IN_STOCK ( In stock )
Heavy duty hoof rasp is designed specifically for smoothing and filing hooves. Coarse teeth on one side, fine teeth on other. 14 long.
More

Milwaukee® 1/2 Ton Electric...

$1,613.00
Global Industrial Milwaukee® 1/2 Ton Electric Chain Hoist - 10' Lift 115/230v, 1-Phase
No Shipping Info
/milwaukee-12-ton/dw8bbGdg1gzjetEZfBaXPw==/info
Global Industrial
IN_STOCK ( In stock )
Milwaukee 1/2 Ton Electric Chain Hoist - 10' Lift 115/230V, 1-Phase All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights, you can order a Milwaukee Electric Chain Hoist to meet your roughest needs. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. You can get single or three-phase voltage motors to meet your operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation. Single-phase, 115/230 voltage (AC), 9.8 amps at low voltage1/2 ton rated load, 10 ft. lift height, 16 ft./min... Less
More

Lincoln Lube Electric...

$188.93
Ohio Power Tool Lincoln Lube Electric PowerLuber Grease Gun AC2440
No Shipping Info
/lincoln-lube-electric/hRVqJypDtBCKAGj6blkWyg==/info
Ohio Power Tool
IN_STOCK ( In stock )
Lincoln Lube Outstanding durability and dependability Patented pump design that ensures uninterrupted grease flow Variable-speed trigger Ergonomic styling provides comfort and balance 30? high-pressure hose with coupler and attachment clip Includes a combination filler nipple and bleeder valve Superior flow performance obtained through advanced design
More

LEESON General Purpose...

$279.99
Northern Tool LEESON General Purpose Electric Motor -1 1/2 HP, 208-230/460V, 1800 RPM, Three Phase, C-Face No Base, Model 110125
+ $19.99 shipping
/leeson-general-purpose/1m_avodUkjlDS9So_oYgNg==/info
Northern Tool
IN_STOCK ( In stock )
The 1 1/2 HP LEESON General Purpose 3-Phase Electric Motor can be used in various applications such as pumps, conveyors, compressors, blowers, fans, and many other standard industrial applications. Perfect for applications that are continuous duty and where water and dust exposure is minimal. UL listed and CSA certified. Frame Type 56C, Hertz 60, HP 1 1/2, CSA Yes, Rotation Direction REV, Shank Diameter in. 5/8, Shank Length in. 1.41, Motor Phases 3, Reversible Yes, Totally Enclosed Housing Yes, UL Yes, Volts 208-230/460, Amps 5, Rated RPM 1,800. Double-shielded ball bearings for long life Reversible rotation direction adds versatility Continuous duty operation Durable rolled steel construction Totally enclosed, fan-cooled TEFC housing has an external fan to provide cooling by blowing air... Less
More

LEESON Reversible Electric...

$329.99
Northern Tool LEESON Reversible Electric Motor - 3/4 HP, 1800 RPM, Model 100008.00
+ $18.49 shipping
/leeson-reversible/Dz5-UgTfR9Eml7SUyoXk2w==/info
Northern Tool
IN_STOCK ( In stock )
This LEESON reversible 3/4 HP general purpose motor has NEMA frame #S56, and rigid base. For use where water and dust exposure is minimal. Ideally suited for use on pumps, compressors, blowers, fans and other standard industrial applications. U.S.A. Volts 115/208-230, Shank Diameter in. 5/8, Shank Length in. 1 7/8, Manual Overload Protection No, Motor Phases Single, Rigid Base Yes, Frame Type NEMA S56, HP 3/4, Capacitor Start Yes, Amps 5.4 at 230V, Auto Overload Protection No, Rated RPM 1,800. Durable rolled steel construction NEMA design B performance Meets or exceeds NEMA service factors Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified Service Factor 1.25. Model Number: 100008
More

LEESON Compressor Duty...

$429.99
Northern Tool LEESON Compressor Duty Electric Motor - 5 HP, 230V, 3600 RPM, Model 111275
+ $27.49 shipping
/leeson-compressor-duty/SV08loDOLMJ9e8UtnDD6rA==/info
Northern Tool
IN_STOCK ( In stock )
The 5 HP Leeson Compressor Duty Electric Motor is a powerful single-phase motor designed especially for use with air compressors, pumps, and fan and blower applications that require high breakdown torque and rugged mechanical construction. The motor features high torque to assure your compressor quickly reaches full speed. UL listed. CSA certified. Amps 20.8, CSA Yes, Frame Type 56H, Hertz 60, Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, Open Drip Proof Housing Yes, Resilient Base No, HP 5, Manual Overload Protection Yes, Motor Phases 1, Shank Diameter in. 5/8, Shank Length in. 2, Totally Enclosed Housing No, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, UL Yes, Volts 230, Rated RPM 3,600. Prelubricated, double-shielded, amply-sized ball bearings... Less
More

LEESON General Purpose...

$239.99
Northern Tool LEESON General Purpose Electric Motor -3/4 HP, 208-230/460V, 1800 RPM, Three Phase, TEFC, C-Face No Base, Model 110048
+ $18.49 shipping
/leeson-general-purpose/uj0-L9rTp4hx5jCSsPq-nA==/info
Northern Tool
IN_STOCK ( In stock )
The 1 HP LEESON General Purpose 3-Phase Electric Motor can be used in various applications such as pumps, conveyors, compressors, blowers, fans, and many other standard industrial applications. Perfect for applications that are continuous duty and where water and dust exposure is minimal. Meets or exceeds NEMA service factors. UL listed and CSA certified. HP 1, Motor Phases 3, CSA Yes, Frame Type 56C, Hertz 60, Shank Length in. 1.41, Totally Enclosed Housing Yes, UL Yes, Reversible Yes, Rotation Direction REV, Shank Diameter in. 5/8, Volts 208-230/460, Amps 3.8, Rated RPM 1,800. Double-shielded ball bearings for long life Reversible rotation direction adds versatility Continuous duty operation Durable rolled steel construction Totally enclosed, fan-cooled TEFC housing has an external fan... Less
More

Campbell/Diamond /Nichon Hoof...

$31.23
Hayneedle Campbell/Diamond /Nichon Hoof Nipper Multicolor - 026088
+ $5.99 shipping
/campbelldiamondnichon/9ywSUImgvmkmWZpCKXdx9Q==/info
Hayneedle
IN_STOCK ( In stock )
Shop for Electrical Tools from Hayneedle.com! The Campbell/Diamond/ Nichon Hoof Nipper makes hoof clipping effective and easy. Constructed from high-quality materials, these extra long hoof clippers keep you out of harm s way while you re helping your animal. The easy-to-use handle is a lightweight eight ounces.About Bradley Caldwell, Inc.On February 1996, Caldwell Supply Company and New Holland Supply merged, and a new and unique approach to distribution was created. The result is Bradley Caldwell Inc., a company with more than 100 years of industry experience. Located in the Pocono Mountains of Eastern Pennsylvania, its service area covers 17 states and extends from Maine to Michigan to North Carolina. BCI is the only full-line distribution warehouse in the region, with more than 30,000... Less
More

MILLER ELECTRIC 228 028 Tool...

$34.99
Zoro MILLER ELECTRIC 228 028 Tool Bag,22x14x21/2 In,22 Pocket G7622456
Free Shipping
/miller-electric-228-028/_GoY1841Vr9nqdqQ9MP25Q==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Tool Bag, General Purpose, Canvas, Number of Pockets 22, Width 22 In., Depth 14 In., Height 21/2 In., Color Black, Number of Pieces 1, Material Polyester w/ PVC backing, Number of Inside Pockets 9, Number of Outside Pockets 13, Features Comfortable and Well Padded Shoulder Strap, Includes Shoulder Strap
More

Northern Industrial Tools...

$289.99
Northern Tool Northern Industrial Tools Heavy-Duty Electric Hoist - 2,000-Lb. Double Line/1,000-Lb. Single Line Capacity
+ $51.99 shipping
/northern-industrial-tools/EN5Hioz5HjASt8_30zCnhw==/info
Northern Tool
IN_STOCK ( In stock )
The Northern Industrial Tools Heavy-Duty 2000-lb. Load Capacity double line Electric Hoist is great for lifting engines, tables, lumber, shop equipment and a whole range of other products. No need to climb a ladder and crank a lever with this hoist you can remain on the ground to control operations. Includes remote switch, 39ft. cable with cable guard, stopper and hook with safety latch. Amps 17, Cable Length ft. 39, Dimensions L x W x H in. 19 3/4 x 7 9/10 x 11, HP 2 1/4, Lift Height ft. 36-single line, 18-double line, Lifting Speed FPM 33 minimum-single line, 16 1/2 minimum-double line, Single Line Lift Capacity lbs. 1,000, Double Line Lift Capacity lbs. 2,000, Duty Cycle min. S3 20-10min., Volts 110, Cable Diameter in. 7/32. Compact size makes unit easy to mount in tight spaces Single... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145