Ratchet Binder, Working Load Limit 9200 Lb, 1/2 Trade Size G30/g43, 3/8 Trade Size G70, Hook To Hook Min/max 22 1/2 To 31 In, Heat Treated, High Strength Drop Forged Steel Construction, For Use In The Trucking And Marine Industry, Standards Us Dot Title 49/commercial Vehicle Safety Alliance

A/c Compressor, R-22, Nominal Hp 2 1/2, 28,000 Btuh, Voltage 230/208, 60 Hz, 1 Phase, 14.9 Amps, Line Connection Suction Id 3/4 In, Line Connection Discharge Id 1/2 In, 7 1/2 Base Mount Length (in), 7 1/2 Base Mount Width (in), Height 14 In, Width 9 3/4 In, Length 7 1/4 In, Run Capacitor Mf/volt 45/370, Start Cap Mfd/volts 145-175/250, Application A/c / Heat Pump Equipment, Agency Compliance Ul/csa, Includes Installation Instructions, Motor Protector And Mounting Parts

A/c Compressor, R-22, Nominal Hp 1 1/2, 18,000 Btuh, Voltage 230/208, 60 Hz, 1 Phase, 7.4 Amps, Line Connection Suction Id 5/8 In, Line Connection Discharge Id 3/8 In, 8 Base Mount Length (in), 4 3/4 Base Mount Width (in), Height 13 1/2 In, Width 9 3/4 In, Length 7 1/4 In, Run Capacitor Mf/volt 30/370, Start Cap Mfd/volts 161-193/250, Application A/c / Heat Pump Equipment, Agency Compliance Ul/csa, Includes Installation Instructions, Motor Protector And Mounting Parts

Industrial Generator, Rated Watts 4500, Surge Watts 7000, Engine Brand Honda, 120/240 Voltage, 41.7/20.8 Amps @ 120/240v, Yes Circuit Breaker, Engine Size 389cc, Engine Alternator Iavr, 8.1 Run Time @ Full Load (hr./tank), 11.2 Run Time @ 1/2 Load (hr./tank), 72 Sound Level Db, 6.2 Fuel Tank Capacity (gal.), Recoil Starter Type, Air Cleaner Type Foam, Low Oil Shut Down Yes, 41.9 Length (in.), 27.2 Width (in.), 29.2 Height (in.), Portable Mounting Type, 5000 Max. Ac Watts, Full Power Switch Yes

Cargo Bar, One Piece, E-track Type, Service Range 92 To 102 In, 2 5/8 X 3 3/4 Tubing, Aluminum, For Use With Standard E-track Like 2yv60 And 2yv61

The Precision Twist EB6302 series of end mills are a extra length, ball nose, two flutes are made of carbide with a bright finish is used for high speed machining of curved surfaces and best performance in steel (not hardened), cast iron, stainless steel and copper. Ball nose end mills have a smooth geometry of the cutting tip, which facilitates lower cutting forces, giving the cutter added strength under pressure. They can also produce radii in the bottom of slots or pockets for added strength, reducing stress concentrations. Two flute end mills are generally used for cutting slots or groves. The two flute design offers a large chip space, easy chip ejection, a little less rigidity due to a small section area and a lower quality of surface finish. End mills are tools with cutting... Less

Cargo Bar, One Piece, E-track Type, Service Range 85 To 96 In, 2 5/8 X 3 3/4 Tubing, Aluminum, For Use With Standard E-track Like 2yv60 And 2yv61

Air Circulator, Mobile, Satellite, Industrial Oscillating Misting, Propeller Dia 30 In, Propeller Material Steel, Cfm Low 4893, Cfm Medium 5621, Cfm High 6420, 115 Voltage, 60 Hz, 1 Phase, Operating Amps 2.6, Motor Type Permanent Split Capacitor, Number Of Blades 3, Max Ambient Temp 107 F, Width 32 3/4 In, Height 78 In, Max Depth 29 1/2 In, Requires 4arj8 Or 4arj9 Misting Air Circulator Includes 30 Foot Water Line

Air Circulator, Mobile, Satellite, Industrial Oscillating Misting, Propeller Dia 24 In, Propeller Material Steel, Cfm Low 4031, Cfm Medium 4899, Cfm High 6277, 115 Voltage, 60 Hz, 1 Phase, Operating Amps 2.6, Motor Type Permanent Split Capacitor, Number Of Blades 3, Max Ambient Temp 107 F, Width 23 3/4 In, Height 75 In, Max Depth 29 1/2 In,requires 4arj8 Or 4arj9 Misting Air Circulator, Includes 30 Foot Water Line

Come to our store for further discounts on a Brand new General Woodworking Machinery Osborne Miter Gauge Guide Sturdy triangular design provided tight and smooth miter joint time after time, Sliding stop features allows you to flip the gauge up out of the way when not in use, Index graduations are marked in high contrast and easy to ready even in a cloud of sawdust, Quickly and easily find any angle you need and lock it right into place with the patented extension arm assembly, Fence can be adjusted from side to side allowing tight clearances near the blade

EB2 - EB2

A/c Compressor, R-22, Nominal Hp 2, 24,000 Btuh, Voltage 230/208, 60 Hz, 1 Phase, 12.5 Amps, Line Connection Suction Id 3/4 In, Line Connection Discharge Id 1/2 In, 7 1/2 Base Mount Length (in), 7 1/2 Base Mount Width (in), Height 14 In, Width 9 3/4 In, Length 7 1/4 In, Run Capacitor Mf/volt 30/370, Start Cap Mfd/volts 145-175/250, Application A/c / Heat Pump Equipment, Agency Compliance Ul/csa, Includes Installation Instructions, Motor Protector And Mounting Parts

A/c Compressor, R-22, Nominal Hp 2, 24,000 Btuh, Voltage 230/208, 60 Hz, 1 Phase, 12.5 Amps, Line Connection Suction Id 5/8 In, Line Connection Discharge Id 3/8 In, 8 Base Mount Length (in), 4 3/4 Base Mount Width (in), Height 14 In, Width 9 3/4 In, Length 7 1/4 In, Run Capacitor Mf/volt 30/370, Start Cap Mfd/volts 145-175/250, Application A/c / Heat Pump Equipment, Agency Compliance Ul/csa, Includes Installation Instructions, Motor Protector And Mounting Parts

EB42 1 5/16 HEAVY DUTY 1/4 BLADES H.S

The Precision Twist EB6304 series of end mills are a extra length, ball nose, four flutes are made of carbide with a TiN finish is used for high speed machining of curved surfaces and best performance in steel, stainless steel, cast iron, and copper. The TiN finish is a gold-colored ceramic coating that combines hardness and low friction to extend cutting tool life and permit faster cutting speeds than with uncoated tools. You can be more productive and spend less time working. The regular length trades off rigidity for length, so you can work with thicker pieces of material or be able to reach out of the way locations. Ball nose end mills have higher feed rates due to the smooth geometry of the cutting tip, which facilitates lower cutting forces, giving the cutter added strength under... Less

This is the ROHL Collection bringing authentic luxury to the kitchen and bath Authentic luxury is defined by quality authenticity innovation and value Every faucet fixture and accessory we offer is designed by acclaimed architects and craftsmen to re...

This is a New Dynapac EB-35 Air Consumption 616 Frequency 8,800 rpm Max centrifugal force 3,564 N

The Precision Twist EB6304V series of end mills are a extra length, ball nose, two flutes are made of carbide with a TiAIN finish is used for high speed machining of curved surfaces and best performance in steel, cast iron, stainless steel, unalloyed titanium, and unalloyed nickel. TiAIN is a multi-layer coating applied by PVD coating technology, which exhibits high toughness and oxidation stability. These properties make it ideal for higher speeds and feeds, while at the same time, improving tool life. It is recommended to use TiAIN when machining dry. Four flutes have the highest rigidity, the largest section area and a small chip space. They also give the best surface finish and are recommended for profiling, side milling and shallow slotting. End mills are tools with cutting... Less

Wall Guard, Material Epdm Rubber, Aluminum (retainer), Color Black, Length 12 Ft., Width 2-1/2 In.

EB48 1 1/2 HEAVY DUTY 1/4 BLADES H.S

The Precision Twist EB6304 series of end mills are a extra length, ball nose, four flutes are made of carbide with a TiN finish is used for high speed machining of curved surfaces and best performance in steel, stainless steel, cast iron, and copper. The TiN finish is a gold-colored ceramic coating that combines hardness and low friction to extend cutting tool life and permit faster cutting speeds than with uncoated tools. You can be more productive and spend less time working. The regular length trades off rigidity for length, so you can work with thicker pieces of material or be able to reach out of the way locations. Ball nose end mills have higher feed rates due to the smooth geometry of the cutting tip, which facilitates lower cutting forces, giving the cutter added strength under... Less

Double Handle 8" to 16" Widespread Lavatory Faucet with American Lever Handles and Brass Drain Assembly from the Heritage CollectionElement s of Design s primary mission is to become the leading provider of cost effective, high quality products in the plumbing community. Their focus has made them grow by leaps and bounds in just a few years by identifying the key problems in manufacturing today and solving them. Elements of Design produces high quality products ranging from kitchen, bath, and lavatory faucets to accessories such as diverters, towel bars, robe hooks, supply lines, and miscellaneous parts. With our low price, amazing stock times and quality products, you can rest assured that when you order a Elements of Design product you will love every part of the experience, and it will... Less

Unit Cooler, Walk-in, Fan Quantity 1, Air Flow 845 Cfm, Motor Type Ec Motor, Motor Volts/hz 115/60, Liquid Line Size 0.5 In., Suction Line Size 0.625 In., Additional Features Low Silhouette, Flush To Ceiling With Under 16 In Headroom, Plastic Fan Guard, Front Access To Refrigeration Components, Electrical Panel Located Behind Front Access, Hinged Aluminum Cover, Rifled Tubing And Fin Design Improve Heat Transfer

Unit Cooler, Walk-in, Fan Quantity 4, Air Flow 3,760 Cfm, Motor Type Ec Motor, Motor Volts/hz 115/60, Suction Line Size 1.125 In., Additional Features Low Silhouette, 12 In Clearance, 2-way Air Discharge, Plastic Fan Guard, Front Access To Refrigeration Components, Electrical Panel Located Behind Front Access Hinged Aluminum Cover, Rifled Tubing And Fin Design Improve Heat Transfer

Unit Cooler, Walk-in, Fan Quantity 2, Air Flow 1,200 Cfm, Motor Type Ec Motor, Motor Volts/hz 115/60, Suction Line Size 0.875 In., Additional Features Low Silhouette, 18 In Clearance, 2-way Air Discharge, Plastic Fan Guard, Front Access To Refrigeration Components, Electrical Panel Located Behind Front Access Hinged Aluminum Cover, Rifled Tubing And Fin Design Improve Heat Transfer

Unit Cooler, Walk-in, Fan Quantity 1, Air Flow 900 Cfm, Motor Type Ec Motor, Motor Volts/hz 115/60, Suction Line Size 0.875 In., Additional Features Low Silhouette, 12 In Clearance, 2-way Air Discharge, Plastic Fan Guard, Front Access To Refrigeration Components, Electrical Panel Located Behind Front Access Hinged Aluminum Cover, Rifled Tubing And Fin Design Improve Heat Transfer

Unit Cooler, Walk-in, Fan Quantity 6, Air Flow 5,640 Cfm, Motor Type Ec Motor, Motor Volts/hz 115/60, Suction Line Size 1.375 In., Additional Features Low Silhouette, 12 In Clearance, 2-way Air Discharge, Plastic Fan Guard, Front Access To Refrigeration Components, Electrical Panel Located Behind Front Access Hinged Aluminum Cover, Rifled Tubing And Fin Design Improve Heat Transfer