Ducati 250 Cars and Accessories - Shopping.com

Category

Motorcycle Parts and A...
Showing results for "ducati 250"
Results 1 - 40 of 1500+

Ducati 250 Side Panel Decal

$10.00
eBay Ducati 250 Side Panel Decal
Free Shipping
/ducati-250-side-panel/_65J8sPIYKB4Cf-0WTu0qw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
HERE IS A HI QUALITY VINYL PEEL AND STICK SIDE PANEL DECAL FOR 250 DUCATI, USED ON SPANISH DUC, I HAVE THEM IN BLACK OR WHITE, PLEASE MENTION YOUR CHOSE, THIS AUCTION IS FOR 1 DECAL, YOU MAY BUY MORE WITH COMBINED SHIPPING. I SHIP USPS
More

Ducati 250 350 450 Single 14...

$29.99
eBay Ducati 250 350 450 Single 14 Piece Engine Seal Kit Made In Italy
+ $3.99 shipping
/ducati-250-350-450-single/_X_ZDToO0eTwgSUIj8tVqg==/info
eBay
IN_STOCK ( In stock )
valtermotousa Store Ducati 250 350 450 single 14 piece engine seal kit Made In Italy 1960's-70's Ducati 250 350 450 OHC single cylinder 14 piece engine seal kit. Includes valve stem seals and carb insulator gasket blocks in both 29mm and 32mm. Made in Italy by Ariete using top quality rubber exactly matched to the technical requirements of the application. These parts are really expensive, but made to last. Don't use Chinese junk in your classic bike! Gladly shipped around the world to foreign
More

Ducati Single Toolbox Knob...

$19.50
eBay Ducati Single Toolbox Knob Stainless 250 450 Bevel
+ $3.45 shipping
/ducati-single-toolbox/g25REhjQ9WfqFyj0zTyY6Q==/info
eBay
IN_STOCK ( In stock )
Condition is PERFECT!! It should fit just about ALL Ducati singles of the sixties and seventies, to my knowledge. These versions are 100% stainless steel, for that custom or racing look you may be looking for... I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:31:33 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me)
More

Ducati Narrowcase Single...

$38.61
eBay Ducati Narrowcase Single Stainless Bolt 160 250 Bevel
Free Shipping
/ducati-narrowcase-single/aIwsTRXc1DDwKpZJyVLU9g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
DUCATI NARROWCASE 250. This kit contains all the screws/nuts and bolts on the engine - including case bolts. All bolts/nuts HAND polished stainless (mirror finish). all hex heads have all markings ground off. all allen heads have knurls removed. The whole kit is sorted, labeled and includes instructions. perfect for your basket case, restoration, or what have you. This kit is specifically designed to fit all DUCATI NARROWCASE 160/200/250/350 (MONZA/SCRAMBLER/ 250GT/MACH 1/ELITE/DIANA/ETC ..),(if yo
More

1968on Ducati 250 350...

$18.75
eBay 1968on Ducati 250 350 Scrambler Right Hand Folding Foot Peg Assembly 0689-69-150
+ $4.99 shipping
/1968on-ducati-250-350/7A0ciHwI1zIBHP1g5Mv7jw==/info
eBay
IN_STOCK ( In stock )
1968on Ducati 250 350 Scrambler right hand folding foot peg assembly 0689-69-150 Believed to be late 1968-on wide case Ducati 250 350 450 Scrambler right hand folding foot peg assembly 0689-69-150, but please check your bike and ask any questions before buying! Brand new old stock!Add me to your Favorite Sellers Payment by PayPal please. We will combine shipping on multiple items so long as they fit in the same box. Payment by PayPal as soon as possible and always within 7 days. No returns or r
More

1960's Ducati 250 Ohc 5 Speed...

$22.74
eBay 1960's Ducati 250 Ohc 5 Speed Single Cyl Engine Poster
+ $4.99 shipping
/1960s-ducati-250-ohc-5/DN0T8kxxOEIjnm60hoGGbw==/info
eBay
IN_STOCK ( In stock )
valtermotousa store 1960's Ducati 250 OHC 5 speed single cyl engine poster 1960's Ducati 250 OHC 5 speed single cylinder engine poster, believed to be a reprint, high quality heavy paper, VERY NICE! Size is 27.5 X 22 inches.New condition and perfect; shipped in a tube to you.Add me to your Favorite Sellers Visit My eBay Store We will combine shipping on multiple items so long as they fit in the same box. Thank you for looking and please check back to see our latest high quality motorcycle produ
More

1960's Ducati 250 350 Right...

$17.49
eBay 1960's Ducati 250 350 Right Hand Non-folding Foot Peg 0440-69-150 Street Models
+ $4.99 shipping
/1960s-ducati-250-350/R4CxcNJ6OywHTkjS5Eb-ng==/info
eBay
IN_STOCK ( In stock )
1960's Ducati 250 350 right hand NON-folding foot peg 0440-69-150 street models Believed to fit narrow case Ducati 250 350 450 models LATER THAN first 175/200 , right hand NON-folding street model foot peg 0440-69-150, but please check your bike and ask any questions before buying! Brand new old stock! Last list price was $76.22 each!Add me to your Favorite Sellers Payment by PayPal please. We will combine shipping on multiple items so long as they fit in the same box. Payment by PayPal as soon
More

Ducati 250 350 450 Wide Case...

$39.95
eBay Ducati 250 350 450 Wide Case Singles Battery Tray 10914
+ $4.99 shipping
/ducati-250-350-450-wide/dq9uVJI5E-iOjFsWi4V1KA==/info
eBay
IN_STOCK ( In stock )
valtermotousa Store Ducati 250 350 450 wide case singles battery tray 10914 1968-on Ducati 250 350 450 wide case OHC singles battery tray 0684.38.830 in fresh rubber. 125mm long, 90mm wide, 30mm tall. Made in Italy by Ariete using top quality rubber exactly matched to the technical requirements of the application. These parts are really expensive, but made to last. Don t use Chinese junk on your classic bike! Gladly shipped around the world to foreign countries for actual cost, which depends up
More

Ducati 250/350/450, Mv Agusta...

$12.49
eBay Ducati 250/350/450, Mv Agusta 175, Morini, Grey Cushion Grips 1 + 7/8
Free Shipping
/ducati-250350450-mv/lkPL2T1bsKhbI0vtfXpbvQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ducati 250/350/450, MV Agusta 175, Morini, NOS grey cushion grips 1 + 7/8 Ducati 250/350/450, MV Agusta 175, Morini, NOS grey cushion handlebar grips 1 + 7/8 = 25.4mm X 18mm, 4 1/4 = 111mm long .Brand new.Add me to your Favorite Sellers Visit My eBay Store We will combine shipping on multiple items so long as they fit in the same box. Thank you for looking and please check back to see our latest high quality motorcycle products. Payment by PayPal please. We will combine shipping on multiple i
More

Ducati 250 350 450 Carb To...

$26.99
eBay Ducati 250 350 450 Carb To Air Cleaner 11 Rubber Flex Tube 0692-91-110 =03912/a
+ $4.99 shipping
/ducati-250-350-450-carb/r6wnY9QJKE1T8MwqE7pWhA==/info
eBay
IN_STOCK ( In stock )
Ducati 250 350 450 carb to air cleaner 11 rubber flex tube 0692-91-110 =03912/A Ducati 250 350 450 carb to air cleaner 11 long rubber flex tube hose 0692-91-110 has 34mm opening at carb end and approximately 50mm X 70mm oval opening at air cleaner. Verify size for your own bike before you buy! Very well made with excellent materials. The Real Deal from Italy. Made in Italy by Ariete using top quality rubber exactly matched to the technical requirements of the application. These parts are rea
More

1960's Ducati 250cc Pair Peg...

$69.95
eBay 1960's Ducati 250cc Pair Peg Rubbers With Logo Recreated For Museum Bikes 01539
+ $4.99 shipping
/1960s-ducati-250cc-pair/vaNP2Qq1aFdPuN5yFQomJQ==/info
eBay
IN_STOCK ( In stock )
valtermotousa Store Auctiva's FREE Scrolling Gallery will enhance your listings. 1960's Ducati 250cc PAIR peg rubbers with logo recreated for museum bikes 01539 1960's Ducati 175cc 250cc Monza PAIR peg rubbers with logo recreated for museum bikes recreated by hand for museum bikes, using the original old molds , which cannot be used with modern production machines. I did not realize that they were so expensive, 79.02 Euro per PAIR, until I saw the invoice , and there were very few made. You
More

Gold Ducati Timing Plug...

$26.00
eBay Gold Ducati Timing Plug Clutch Primary Case Bevel As 250 450 750 900
+ $3.45 shipping
/gold-ducati-timing-plug/NXCfLokvKlVyAZooi8MeRg==/info
eBay
IN_STOCK ( In stock )
At hand is a brand-new Ducati timing plug, part # 0400-49-090. It should suit ANY Ducati single or bevelhead twin. (Though some later twins had different cast script noting Agip, dimensions are exactly the same.) These plugs are die-cast from solid zinc, then GOLD ANODIZED. Finish and fit are perfect and the plating should hold up very well, unlike paint. They will finish off your restoration very well. Please also find the special 14mm tool elsewhere in my store.I will answer legitimate ques
More

Ducati Widecase Single...

$38.61
eBay Ducati Widecase Single Stainless Bolt Set 250 350 450 Polished
Free Shipping
/ducati-widecase-single/NuKeUHDDdz7BGTzm3OysnQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
DUCATI WIDECASE 250/350/450. This kit contains all the screws/nuts and bolts on the engine - including case bolts - All bolts/nuts HAND polished stainless (mirror finish). all hex heads have all markings ground off. all allen heads have knurls removed. PLEASE LET US KNOW IF YOU HAVE A 450 - 2 bolts are different The whole kit is sorted, labeled and includes instructions. perfect for your basket case, restoration, or what have you. This kit is specifically designed to fit all DUCATI WIDECASE 250/
More

Ducati Bevel Single Engine...

$22.95
eBay Ducati Bevel Single Engine Seal Set 250 350 N/c
+ $3.95 shipping
/ducati-bevel-single/PXQS9XBwa14dbJ3fC2XAsQ==/info
eBay
IN_STOCK ( In stock )
Freshly made engine seal set for Ducati 250/350 N/C models. Made in Italy by Ariete and Includes all parts pictured.Foreign bidders: Due to the increased USPS shipping cost for over seas delivery has become very expensive to send this part individually. If you are interested in purchasing different or multiple items from our E-Bay store we would be glad to give you a quote for combined shipping cost. Grazie, MotoGuzzino.com
More

1960's-on Ducati Ohc 250 350...

$12.99
eBay 1960's-on Ducati Ohc 250 350 450 Cam Drive Tower Casting Into Head
+ $4.99 shipping
/1960son-ducati-ohc-250/TR4cuJnn8cpF2EIcbfMuXA==/info
eBay
IN_STOCK ( In stock )
1960's-on Ducati OHC 250 350 450 NOS cam drive tower casting into head 1960's-on Ducati OHC 250 350 450 NOS cam drive tower casting into the head. holes for 6mm bolts are 55mm apart, and hole for tower is 31mm in diameter. Brand new part from the original Ducati factory inventory. Please watch this eBay store in the future for great deals on new old stock genuine Ducati parts, sold at huge discounts! We only have what is listed here for sale, with no other availability. Add me to your Favorite
More

Ducati Single Seat Badge...

$24.00
eBay Ducati Single Seat Badge Plate 160 250 350 450 Bevel
+ $4.45 shipping
/ducati-single-seat-badge/-bgCjwTGRrY-JyIxwWJ4iw==/info
eBay
IN_STOCK ( In stock )
To suit many later Ducati singles of the sixties, to my knowledge.This plate is crafted in ALUMINUM, just like the original, and the silkscreen is brilliant. This is NOT some cheapo mylar copy or a crumply amateur effort. IT'S PERFECT. Dimensions 95mm x 18mm. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:31:08 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished,
More

Ducati Bevel Single Engine...

$22.95
eBay Ducati Bevel Single Engine Nut Set, 250 350 450 Desmo
Free Shipping
/ducati-bevel-single/0NLhZmgXGP5akSJQp66CyQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Ducati engine nut set for 250/350/450cc N/C W/C Bevel singles. This 4 piece nut set includes two 14mm cam/crank nuts and two 16mm clutch/sprocket nuts. Please measure you existing nuts to make sure you are ordering the correct size. Ducati part # 0400.29.050 and 0250.16010 and sold in a set of 4 as shown.!!! Free Domestic Shipping !!!Foreign bidders: Due to the increased USPS shipping cost for over seas delivery it has become very expensive to send this part individually. If you are interested
More

2 Stainless Ducati Single...

$18.00
eBay 2 Stainless Ducati Single Lever Adjuster Set 250 350 450
+ $4.45 shipping
/2-stainless-ducati-single/0P3lD_nGHHo3UnzCSuyb6Q==/info
eBay
IN_STOCK ( In stock )
Variation #2 for Ducati singles, to suit the chrome steel lever mounts of the day. Adjuster is bored for a 6mm outer cable housing. OD of thumbwheel is 14mm, OD of lockring is 15mm, thread is 8mm x 1mm pitch. These parts are fabricated completely in rust-free, tarnish-free stainless steel. This listing is for the pair shown.I have two other versions of these adjusters in my Ebay store. Surely one of them will work for you!I will answer questions promptly, good luck and thanks for looking. On Fe
More

Ducati Single Frame Id Plate...

$32.00
eBay Ducati Single Frame Id Plate 250 350 450 750 Bevel Late Single/early Twin
+ $4.45 shipping
/ducati-single-frame-id/3yAIvgsF0vZzIYr2NJtooA==/info
eBay
IN_STOCK ( In stock )
To suit Ducati singles of the very late '60s/early '70s, and very early twins, to my knowledge.This plate is crafted in ALUMINUM, just like the original, and the silkscreen is brilliant. This is NOT some cheapo mylar copy or a crumply amateur effort. IT'S PERFECT, with adhesive back. Stamp in your info and you're ready for the show... I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:31:08 PST, seller added the following information: Buyers please note: If yo
More

Ducati Single Brake Switch...

$6.00
eBay Ducati Single Brake Switch Spring 250 350 450 Bevel 0445-38-485
+ $3.45 shipping
/ducati-single-brake/Grv4M-OpOMIRwVP6mGLtkQ==/info
eBay
IN_STOCK ( In stock )
Impossible to find. Stainless steel, no more rust, always perfect. Ducati part number should be 0445-38-485. This beautiful spring should fit just about all Ducati single with the separate switch, narrow or wide case. I will answer questions promptly, good luck and thanks for looking. Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice. Ebay's shipping calculator is terr
More

Ducati Bevel Single Brake...

$22.00
eBay Ducati Bevel Single Brake Spring Set Stainless 250 350 450 (inner Springs)
+ $3.64 shipping
/ducati-bevel-single-brake/Ib_p2aYgT7eyXMJoVlFqZQ==/info
eBay
IN_STOCK ( In stock )
To suit nearly all Ducati singles, please check your parts book. Ducati's original numbers for these internal brake shoe springs are 0440-77-590 for the front, 0180-77-590 for the rear. Fit and finish guaranteed fantastic. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:20:04 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Se
More

Ducati Single Alternator Wire...

$35.00
eBay Ducati Single Alternator Wire Nut Assy 160 250 350 450 Stainless Steel
+ $4.45 shipping
/ducati-single-alternator/LgqC3W5sv-aDl5grZtDkZQ==/info
eBay
IN_STOCK ( In stock )
Machined from stainless steel and beautifully polished, these parts (0400-46-020 and 0400-46-040) make up the bulk of the crimp nut assembly for the alternator cable on just about ALL Ducati singles. You will need your own crush washer and o-ring complete installation. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:38:20 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're
More

Ducati Single Swingarm Zerk...

$18.00
eBay Ducati Single Swingarm Zerk Set Stainless 250 350 450 Bevel Grease Nipple
+ $3.45 shipping
/ducati-single-swingarm/_HiPDQM0-a7JopC_2FGyyw==/info
eBay
IN_STOCK ( In stock )
New production stainless steel, custom-made in the short size Ducati used in the old days. The listing is for BOTH shown, and they should fit most Ducati swingarms, narrow- or wide-case, to my knowledge.Note that these pieces have NOT been demagnetized from the machining process, but we promise they're stainless....I will answer questions promptly, good luck and thanks for looking.
More

1 Stainless Ducati Single...

$18.00
eBay 1 Stainless Ducati Single Lever Adjuster Set 250 350 450 Bevel Handlebar
+ $3.45 shipping
/1-stainless-ducati-single/nCRSxu32KWF0VSITzMUKIA==/info
eBay
IN_STOCK ( In stock )
Variation #1 for Ducati singles, to suit the chrome steel lever mounts of the day. Adjuster is bored for a 7mm outer cable housing. OD of thumbwheel is 20mm, OD of lockring is 15mm, thread is 8mm x 1mm pitch . These parts are fabricated completely in rust-free, tarnish-free stainless steel. This listing is for the pair shown.I have two other versions of these adjusters in my Ebay store. Surely one of them will work for you!I will answer questions promptly, good luck and thanks for looking. On F
More

3 Stainless Ducati Single...

$18.00
eBay 3 Stainless Ducati Single Lever Adjuster Set 250 350 450
+ $3.45 shipping
/3-stainless-ducati-single/tkGMNOJLB3nonaaB-143Fg==/info
eBay
IN_STOCK ( In stock )
Variation #3 for Ducati singles, to suit the chrome steel lever mounts of the day. Adjuster is bored for a 6mm outer cable housing. OD of thumbwheel is 14mm, OD of lockring is 20mm, thread is 7mm x 1mm pitch. These parts are fabricated completely in rust-free, tarnish-free stainless steel. This listing is for the pair shown.I have two other versions of these adjusters in my Ebay store. Surely one of them will work for you!I will answer questions promptly, good luck and thanks for looking. On Fe
More

Ducati Bevel Single Manifold...

$16.95
eBay Ducati Bevel Single Manifold Rubber 27mm, 250 350 450
+ $3.95 shipping
/ducati-bevel-single/yl8m-c-AyI5tvF4_35BS_w==/info
eBay
IN_STOCK ( In stock )
Ducati intake manifold insulator for all bevel singles with 27mm carbs. These rubber insulators are freshly made in Italy and not some dusty old thing left over from the 1960's. Insulators have the usual 52mm bolt hole spacing found on both narrow and wide case singles. These bikes are frequently modified so please measure you existing rubber to make sure you are getting the correct size before ordering. Foreign bidders: Due to the increased USPS shipping cost for over seas delivery it has beco
More

1960's Ducati 250 Monza &...

$12.49
eBay 1960's Ducati 250 Monza & Others Kickstart Leaf Spring 0400-07-183 Old Stock
+ $4.99 shipping
/1960s-ducati-250-monza/Ery5MpF2cYGQM1yCRdYxUw==/info
eBay
IN_STOCK ( In stock )
1960's Ducati 250 Monza others kickstart leaf spring 0400-07-183 new old stock 1960's Ducati 250 Monza others kickstart leaf spring 0400-07-183 new old stock. Recent retail price was $27.00 each! Each bike normally uses two of these springs, or some people combine with used ones for more tension.Add me to your Favorite Sellers Payment by PayPal please. We will combine shipping on multiple items so long as they fit in the same box. Payment by PayPal as soon as possible and always within 7 days.
More

1960's Ducati 250 350 Zinc...

$15.99
eBay 1960's Ducati 250 350 Zinc Plated 0400-84-250 Exhaust Clamp Fits 36-39mm Muffler
+ $4.99 shipping
/1960s-ducati-250-350/FPbFya7eTTNC85YCbd3t5g==/info
eBay
IN_STOCK ( In stock )
1960's Ducati 250 350 zinc plated 0400-84-250 exhaust clamp fits 36-39mm muffler 1960's Ducati 250 350, and similar bikes, zinc plated 0400-84-250 38mm exhaust clamp fits 36- 39mm  diameter mufflers and pipes . New old stock; 38 stamped on clamp. Gladly shipped around the world to foreign countries for actual cost, which depends upon the weight and country. We will combine shipping on multiple items so long as they fit in the same box. Thank you for looking and please check back to see our la
More

Ducati 250 350 450 Tommaselli...

$79.00
eBay Ducati 250 350 450 Tommaselli Compression Release Lever
+ $5.00 shipping
/ducati-250-350-450/xDF4Ococee9WBrFCg-Dg6A==/info
eBay
IN_STOCK ( In stock )
DUCATI 250 350 450 TOMMASELLI COMPRESSION RELEASE LEVER NOS
More

Ducati Single Fork Steering...

$26.00
eBay Ducati Single Fork Steering Nut Stainless 200 250 350 0460-37-110 Narrowcase
+ $3.45 shipping
/ducati-single-fork/3QLottcxMCqg4cUNjTjuSw==/info
eBay
IN_STOCK ( In stock )
To suit just about ANY Ducati single with 31.5mm forks, ie, most narrow case models. Fabricated in beautiful stainless steel. Ducati part number is 0460-37-110. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:37:59 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice. Ebay's shipping calcul
More

Ducati Single Cable-end Set...

$18.50
eBay Ducati Single Cable-end Set Stainless Steel Bevel 160 200 250 350 450
+ $3.45 shipping
/ducati-single-cableend/5iK0X7iIIoDv7_UlctzhgQ==/info
eBay
IN_STOCK ( In stock )
Amazingly intricate and lovely. A complete kit, all in stainless steel. Should be suitable for just about any Ducati single, and many other Italian brands of the era. From left to right, cable ends for front brake, clutch and throttle. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:20:24 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request
More

Ducati Bevel Single Hand Grip...

$39.95
eBay Ducati Bevel Single Hand Grip Set, 98 125 160 175 250 350cc Desmo Italy
+ $3.95 shipping
/ducati-bevel-single-hand/7uVTyF3Oh0539jGHgLSEmw==/info
eBay
IN_STOCK ( In stock )
Just in from Italy freshly made Ducati logo grips with the red rings . These grips were used on lots of Ducati singles of the 1950's and 60's: 98/125/160/175/20 0/250/350cc. Grips are 115mm long and fit 7/8' handle bars or clip-ons. Why bother with crusty 40 year old hard grips that can split when installing or poor quality Indian knock offs when new rubber grips are available.NOTE: If you want them with open ends let us know when ordering and we will send them open.
More

Ducati Timing Plug All Bevel...

$24.00
eBay Ducati Timing Plug All Bevel As 175 250 450 750 900 1000 0400-49-090
+ $3.45 shipping
/ducati-timing-plug-all/J7UHiROZNFeyokCGvK2eUw==/info
eBay
IN_STOCK ( In stock )
At hand is a brand-new Ducati timing plug, part # 0400-49-090. It should suit ANY Ducati single or bevelhead twin. (Though some later twins had different cast script noting Agip, dimensions are exactly the same.) These plugs are die-cast from solid zinc and appear EXACTLY the same as the original cadmium-plated brass. Finish and fit are perfect with no pesky plating to flake off. They will finish off your restoration very well. Please also find the special 14mm tool elsewhere in my store.I wi
More

Ducati Bevel Single 10mm...

$32.95
eBay Ducati Bevel Single 10mm Rocker Arm Shafts, 175 250 350 Non Desmo
+ $3.95 shipping
/ducati-bevel-single-10mm/NEvfQAhoguEromenWcZRTw==/info
eBay
IN_STOCK ( In stock )
Very nice 10mm rocker arm shafts for Ducati NON-Desmo 175/250/350cc N/C W/C Singles. Precision ground and hardened these Italian made shaft are top quality. Ducati part # 0600.92.250 and sold by the pair. Lots of other Ducati single parts available.
More

Ducati Single Overhead Oil...

$34.00
eBay Ducati Single Overhead Oil Line Bolt Set Stainless Bevel 200 250 350 450
+ $4.64 shipping
/ducati-single-overhead/co3KwXjWRN2PeVurYWZHgQ==/info
eBay
IN_STOCK ( In stock )
Beautiful new parts.To suit any Ducati ohc single, to my knowledge, part number 0400-92-020. This listing is for a full set of three, all CNC machined and polished in lovely stainless steel. Includes copper washers shown. So dress her UP! I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:20:13 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Reque
More

Ducati Points/condenser ...

$42.00
eBay Ducati Points/condenser Ignition Set Bevel Single 200 250 350 450 Italy-made
+ $4.64 shipping
/ducati-pointscondenser/ek3ghKLkREodchZuNKfUYQ==/info
eBay
IN_STOCK ( In stock )
Condition is new and perfect, Italian-made. Suitable for all Ducati bevel singles, to my knowledge.Note that condenser mount is slightly different from original, new 4mm threaded hole will have to be drilled in backing plate for fitment, fairly simple...I will answer questions promptly, good luck and thanks for looking. Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice
More

Ducati Single Camshaft...

$16.55
eBay Ducati Single Camshaft Nut/tab Washer/woodruff Key Set 250 350 450 Bevel
+ $3.45 shipping
/ducati-single-camshaft/hwBYfPaypWEij1SFz_Dmyg==/info
eBay
IN_STOCK ( In stock )
To suit ANY bevel Ducati single of the sixties and seventies, to my knowledge. Current production, made in Italy. Listing includes everything shown: l/h threaded nut, tab washer, key. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:37:57 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice.
More

Ducati Single Stainless Shock...

$32.00
eBay Ducati Single Stainless Shock Nut Set 50 80 90 100 160 200 250 350 450
+ $4.64 shipping
/ducati-single-stainless/itIL2T6ENBLvaOkcUa5Dng==/info
eBay
IN_STOCK ( In stock )
Machined from stainless steel and beautifully polished, these nuts (0170-59-080)were used to attach the rear shocks and used on just about ALL Ducati singles. This listing is for the complete set of four nuts shown. I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:38:24 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (
More

Ducati Bevel Single Front...

$42.00
eBay Ducati Bevel Single Front Fender Stay Hardware Set 250 350 450 Stainless
+ $4.64 shipping
/ducati-bevel-single-front/qeTtqyO8VdUzk0FqQKKpwQ==/info
eBay
IN_STOCK ( In stock )
Suitable for most '70s Ducati single front fender apps, mounted to 35mm Marzocchi forks. These parts are beautiful stainless steel, copied from original parts. Should fit perfectly.I will answer questions promptly, good luck and thanks for looking. On Feb-17-10 at 18:38:00 PST, seller added the following information: Buyers please note: If you're buying multiple items (and lots of folks do), then when you're finished, please either 'Request Total from Seller' (me) or just wait for an invoice. Eb
More

Ducati Single O/h Oil Drain...

$12.00
eBay Ducati Single O/h Oil Drain Stat-o-seal Kit 250 350 450
+ $3.45 shipping
/ducati-single-oh-oil/sBtgUhrbyngPzQbfFXewSg==/info
eBay
IN_STOCK ( In stock )
To replace 0400-92-010, the aluminum crush washers Ducati used on ALL ohc singles. On offer is a complete set of six Stat-o-Seal washers, steel with embedded neoprene o-rings.Yeah, aluminum or copper washers work ok, sorta. THESE THINGS, though, are perfect. Aircraft-quality- expensive, but your top end will be bone-dry around the oil line area, guaranteed.I will answer questions promptly, good luck and thanks for looking.On Feb-17-10 at 18:38:02 PST, seller added the following information:Buyer
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388