DTC525LC / DTC550LC Hard Case

YMCFKOK RIBBON FOR DTC550 DUAL 350 IMAGES

Part Number 82235 250 Count Half-patch - perfect for magnetic stripe side of cards Perfect for smart cards Clear Overlaminate 1.0 Mil Thickness For use in the DTC500 series card printers: DTC515-LC DTC525-LC DTC550-LC HDP600-LC HDP820-LC HDP825-LC Pro-L, Pro-LX Cheetah II Persona II Overlaminates are also available with your own custom patterns, logos and/or security features - call our experts for assistance (800) 910-5987

Part Number 81774-001 125 Count Full patch with left side cut-out for use with smart cards. Perfect for smart cards Clear Overlaminate 1.0 Mil Thickness For use in the DTC500 series card printers: DTC515-LC DTC525-LC DTC550-LC HDP600-LC HDP820-LC HDP825-LC Pro-L, Pro-LX Cheetah II Persona II Overlaminates are also available with your own custom patterns, logos and/or security features - call our experts for assistance (800) 910-5987

Part Number 82263 150 count; will cover 75 cards front and back Alternating full-patch with smart chip cut out/half-patch Perfect for smart cards with a magnetic stripe on the back Clear Overlaminate 1.0 Mil Thickness For use in the DTC500 series card printers: DTC515-LC DTC525-LC DTC550-LC HDP600-LC HDP820-LC HDP825-LC Pro-L, Pro-LX Cheetah II Persona II Overlaminates are also available with your own custom patterns, logos and/or security features - call our experts for assistance (800) 910-5987

Plate Stock, Corrosion Resistant, Aluminum, Alloy Type 6061, Thickness 3/16 In, Width 24 In, Length 48 In, Mill Finish, Temper T6, Thickness Tolerance +/-0.0100 In, Width Tolerance +/-0.125 In, Length Tolerance +/-0.125 In, Typical Tensile Strength 45,000 Psi, Typical Yield Strength 40,000 Psi, Typical Hardness 95, Hardness Scale Bhn, Astm B209, Ams 4027, Qq-a-250/11 Standards

Alternating full patch, high resolution Globe design holograph and clear half patchPerfect for use with magnetic stripe cards1.0 mil thickness150 count; will cover 75 cards front and backFor use in the following Fargo printers: DTC500 series: DTC525-LC only (NOT for use with DTC515-LC) DTC550-LC HDP600-LC HDP820-LC HDP825-LC Pro-L Pro-LX Cheetah II Persona II Unless otherwise noted

Got a Question? Call Toll Free 1-877-437-3028 Manufactuer: Fargo MFG Part Number: 086201 Description: DTC Ribbon (YMCKOK Color Ribbon, 400 Images) for the DTC550 Weight: 0.4500 Fargo's new DTC resin ribbons use RFID (Radio Frequency Identification) technology to sense whether you have the correct ribbon installed and alert you if the wrong ribbon has been installed.

LifeCore LC550 Elliptical The LifeCore LC550 Center Drive Elliptical Trainer Features Compact 46" Frame, Close 2" Pedal Spacing, and The Perfect Stride with 17"-25" Manual Adjustment. Compact, Cost Effective, and with the latest engineering technology is what the LifeCore LC550 C-DRIVE Series of Ellipticals deliver every time you use it. You will instantly love the LifeCore LC550 Elliptical Trainer and truly enjoy every workout because of the remarkable feel the C-DRIVE Ellipticals provide. Ellipticals in general, support a great workout without the impact of most cardio equipment. The LifeCore LC550 Center Drive Elliptical Trainer takes it a step further by postioning your body perfectly upright throughout its motion and essentially providing a better, more comfortable workout, and... Less

The Pride Elegance Line LC-550 Medium is a 3-position lift chair with a contemporary split-back design and a full padded chaise between the front edge of seat and the footrest. This padded chaise adds comfort and reduces strain on your legs by providing additional support. The 21" seat width and 19" seat-to-floor height makes it a great choice for average height users.*Formerly known as the LL-550M.

Plate Stock, Corrosion Resistant, Aluminum, Alloy Type 6061, Thickness 1/8 In, Width 12 In, Length 48 In, Mill Finish, Temper T6, Thickness Tolerance +/-0.0070 In, Width Tolerance +/-0.125 In, Length Tolerance +/-0.125 In, Typical Tensile Strength 45,000 Psi, Typical Yield Strength 40,000 Psi, Typical Hardness 95, Hardness Scale Bhn, Astm B209, Ams 4027, Qq-a-250/11 Standards

ATandT 457/458

Plate Stock, Corrosion Resistant, Aluminum, Alloy Type 6061, Thickness 1/8 In, Width 24 In, Length 48 In, Mill Finish, Temper T6, Thickness Tolerance +/-0.0070 In, Width Tolerance +/-0.125 In, Length Tolerance +/-0.125 In, Typical Tensile Strength 45,000 Psi, Typical Yield Strength 40,000 Psi, Typical Hardness 95, Hardness Scale Bhn, Astm B209, Ams 4027, Qq-a-250/11 Standards

Plate Stock, Corrosion Resistant, Aluminum, Alloy Type 6061, Thickness 3/16 In, Width 12 In, Length 48 In, Mill Finish, Temper T6, Thickness Tolerance +/-0.0100 In, Width Tolerance +/-0.125 In, Length Tolerance +/-0.125 In, Typical Tensile Strength 45,000 Psi, Typical Yield Strength 40,000 Psi, Typical Hardness 95, Hardness Scale Bhn, Astm B209, Ams 4027, Qq-a-250/11 Standards

Fargo's PolyGuard lamination material is a secure, tamper-resistant overlaminate. PolyGuard provides superior durability, far exceeding the lamination capabilities of other card printers. Independent tests have shown cards printed with PolyGuard can withstand 50,000 swipes through a magnetic stripe reader before showing signs of wear, while competitive cards begin to show wear after only 300 swipes. PolyGuard is ideal for applications which require long, highly secure card life. Part Number 82260 Alternating Full-Patch, High Resolution Globe Design/Half- Patch, Clear 150 count; will cover 75 cards front and back Perfect for use with magnetic stripe cards Fargo 82260 1.0 Mil thickness Long Lasting For use in the DTC500 series card printers: DTC525-LC only (NOT for use with DTC515-LC)... Less