Category

Tools and Accessories
Showing results for "drill press pulleys"
Results 1 - 40 of 1500+

Dake Corporation 977600-1v...

$2,753.15
eBay Dake Corporation 977600-1v Drill Press,pulley,110v , 2 Hp,phase 1
Free Shipping
/dake-corporation/hR6F0rFwbBY8d1nolNlLUA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . DAKE CORPORATION 977600-1V Drill Press,Pulley,110V, 2 HP,Phase 1 DAKE CORPORATION Item Specifics Item Type Amps AC 20 Includes Keyed Chuck, Plexiglas Chip, Chuck Guard and Drift Item Drill Press Motor HP 2 Number of Speeds Variable Overall Depth 23-5/8 Phase 1 Drive Type Pulley Hz 60 Overall Height
More

Craftsman 15 Drill Press...

Free Shipping
Craftsman 15 Drill Press Pulley Part Number 71363 Fits 113.213853 113.213852
More

Jet J-2500, 15 in. Floor...

$599.00
CPO Jet Jet J-2500, 15 in. Floor Model Drill Press 354400
Free Shipping
/jet-j2500-15-in-floor/7ST4BOPnsYDs7Tn3DuPsCQ==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
J-2500, 15 in. Floor Model Drill Press - 354400. Cast iron head. Large quill allows greater accuracy. Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life. Table tilts 45 degrees. Large ground steel column diameter for maximum head and table support. Hinged metal belt and pulley cover. Accurate depth stop displays inch/mm and has quick set bolt for fast, accurate adjustments. 5/8 drill chuck and arbor
More

Jet J-2530, 15 in. Bench...

$569.00
CPO Jet Jet J-2530, 15 in. Bench Model Drill Press 354401
Free Shipping
/jet-j2530-15-in-bench/qdKtkSbKQbYYUMGp0pN6cg==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
J-2530, 15 in. Bench Model Drill Press - 354401. Cast iron head. Large quill allows greater accuracy. Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings in an enclosed quill for longer life. Table tilts 45 degrees. Large ground steel column diameter for maximum head and table support. Hinged metal belt and pulley cover. Accurate depth stop displays inch/mm and has a quick set bolt fast. 5/8 in. Drill chuck and arbor
More

Drill Presses Press General...

Free Shipping
2 stores Drill Presses Press General International Pres. 17 in. Extended Stroke 75-260 M1
More

JET 354550 J-A5816 15-in Var...

Free Shipping
3 stores JET 354550 J-A5816 15-in Var. Speed Floor Drill Press
More

JET Floor Drill Press - 20in...

Free Shipping
4 stores JET Floor Drill Press - 20in. (354170)
Floor drill press has a 1in. drilling capacity, a 1 1/2 HP, single-phase 115/230V motor and a...
More

Proxxon 38128 Bench Drill...

Free Shipping
3 stores Proxxon 38128 Bench Drill Press TBM 115 - For Drilling Micro Holes
More

Craftsman 17 Drill Press...

$25.00
eBay Craftsman 17 Drill Press Spindle Pulley P/n 817333 For 113.213170 0430
+ $5.35 shipping
/craftsman-17-drill-press/D_uMkgTit2_NFcn4OzPyDg==/info
eBay
IN_STOCK ( In stock )
You are purchasing one new Craftsman variable speed 5 step spindle pulley that fits Craftsman Drill Press models 113.213170 and 113.213171. The height of this 5 step spindle pulley is approximately 3 3/8 inches. The overall diameter of the pulley is 6 inches. It has 5 steps (different diameter for v-belt insertion). The steps uses a 4L v-belt that is 1/2 inch wide belt. Approximate step diameters: Step 1: 2 7/16 inches diameter Step 2: 3 inches Step 3: 3 3/4 inches Step 4: 4 1/2 inches Step 5:
More

Craftsman 17 Drill Press...

$25.00
eBay Craftsman 17 Drill Press Spindle Pulley P/n 817333 For 113.213170 113.213171
+ $5.35 shipping
/craftsman-17-drill-press/O3hLsFnJ-Di65qctkbEulw==/info
eBay
IN_STOCK ( In stock )
You are purchasing one new Craftsman variable speed 5 step spindle pulley that fits Craftsman Drill Press models 113.213170 and 113.213171. The height of this 5 step spindle pulley is approximately 3 3/8 inches. The overall diameter of the pulley is 6 inches. It has 5 steps (different diameter for v-belt insertion). The steps uses a 4L v-belt that is 1/2 inch wide belt. Approximate step diameters: Step 1: 2 7/16 inches diameter Step 2: 3 inches Step 3: 3 3/4 inches Step 4: 4 1/2 inches Step 5:
More

Drill Presses: Drill Press:...

$532.00
Home Depot Drill Presses: Drill Press: JET 15 in. 16-Speed Woodworking Bench Top Drill Press 354165
+ $55.00 shipping
/drill-presses-drill/IdkcUXg-Ofyo8YfxT_m0jg==/info
Home Depot
IN_STOCK ( In stock )
Shop for Tools & Hardware at The Home Depot. At just under 40 in. tall, the JET bench-mounted drill press is moderate in stature but big in productivity and versatility. Drill perfectly perpendicular holes up to 15 in. and select among 16 speed settings from the heavy-duty 9 amp motor. Easily position the 10 in. x 13 in. work surface with the quick-release clamp and tilt it up to 45 degrees to perform a variety of drilling actions. The pulley cover unlatches quickly to make alterations to the motor mount and spindles when putting the machine to use in other spin capacities, for actions such as plating, shaping, sanding, routing or mortising.
More

Wilton JET354170 Floor Drill...

$1,036.99
Sears Marketplace Wilton JET354170 Floor Drill Press, 20
No Shipping Info
/wilton-jet354170-floor/ng0ELrIr9qQRf7C_146tSg==/info
Sears Marketplace
IN_STOCK ( In stock )
20 FLOOR DRILL PRESS Hinged metal belt and pulley cover coupled with quick adjustment motor mount allow rapid changing of spindle speeds Rotating, 45 tilting, crank-operated worktable with quick release clamp On/off switch located on front of the drill press head A 1/2 diameter external positive depth stop with three nut locking feature for quick adjustment
More

Craftsman 12 Drill Press with...

$214.99
Sears Craftsman 12 Drill Press with Laser and LED Light 5/8 in.
Free Shipping
/craftsman-12-drill-press/n_X_xDop6peQzgYaYfuEEg==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The 12 Drill Press with Laser and LED Light Gets it Done RightCut holes in steel, aluminum, wood, plastics and more with ease and precision with the Craftsman 12 drill press with laser and LED light. Made with a rigid frame and positioned on a sturdy steel post, this drill press uses a powerful 1/2 HP motor to spin anywhere between 355 and 3065 revolutions per minute. It powers through metal and rips through wood with speed and accuracy. Featuring smooth turning at high speed and high torque spindle settings, this drill press is designed for sharp and consistent results. You can count on this 12 drill press with laser and LED light to move fluidly from project to project, helping you get more done with laser precision on every job. Perfect as a bench top or temporary jobsite accessory,... Less
More

Craftsman 10 Bench Drill...

$134.99
Sears Craftsman 10 Bench Drill Press with Laser 1/2 in.
Free Shipping
/craftsman-10-bench-drill/fy4xNTSVFocTRBvPWDsM5Q==/info
Sears
IN_STOCK ( In stock )
Free Shipping
10 Bench Drill Press with Laser Merges Ultimate Precision and Reliable PerformanceDrilli ng clean, perfect holes into the toughest material is all in a day's work for the Craftsman 10 bench drill press with laser. With a 1/2 HP motor and a speed range of 680 to 3,150 RPM, this design combines high torque and speed to deliver remarkable performance. 1/2-inch chuck is fitted to the model so you can work comfortably with metal, wood and sanding drums. With a depth gauge and a guiding laser, you can enjoy fast machining and split accuracy in all your jobs.The 10 bench drill press with laser is designed to eliminate guesswork by improving precision. Laser gives you accurate X and Y axis positioning, and the drill table adjusts to help you make flawless corner holes and bevel sanding. Rack and... Less
More

Milwaukee Electromagnetic...

$739.20
Ohio Power Tool Milwaukee Electromagnetic Drill Press MT3 Motor 4292-1
No Shipping Info
/milwaukee-electromagnetic/8-i5aiOcJRk--GFHGDPXhA==/info
Ohio Power Tool
IN_STOCK ( In stock )
Milwaukee No. 3 MT Motor for Electromagnetic Drill Press 4292-1 No job is too large or heavy duty for this durable, reliable drill press motor Specifically designed for production drilling, this 11.5 amp drill motor can handle the toughest drilling jobs with up to a 1-1/4 threaded hole capacity The two-speed unit runs at 750 and 375 RPM, geared low for maximum torque Up to 1600 pounds of drill point pressure with a 1 steel plate Features a # 3 MT chuck for fast and easy bit changes while eliminating slippage and breakage Dual-mount gear case with reverse mount permits tight quarter drilling Use with the larger 4203 adjustable base (sold separately) for the toughest applications Powerful 11.5-amp motor engineered for the toughest applications,... Less
More

Wilton Industrial Drill Press...

$139.99
CPO Powermatic Wilton Industrial Drill Press Vise, 6 in. Jaw Width, 6 in. Jaw Opening, 2 in. Jaw Depth 11676
+ $6.99 shipping
/wilton-industrial-drill/6IB_VFZ4UzQWYvc0Lxu-KA==/info
CPO Powermatic
IN_STOCK ( In stock )
Store not rated
Industrial Drill Press Vise - 11676. Precision machined for accurate and versatile usage on the base, sides, and end. Durable construction with fine grain cast iron castings, and hardened steel jaws. Precision ground for square and parallel accuracy to ±.0001 per inch. Center of the base is open for workholding through the vise. Hardened V-Grooved Jaws hold round shaped objects both vertically and horizontally. Attach to drill press with one of Wilton's clamping kits 660038, 660012, or 660058. (not included). Zinc plated fine thread screw provides smoothing clamping. Designed for applications including drilling, tapping, reaming, and grinding
More

Skil 10 in. Drill Press with...

$129.99
Skil Shop Skil 10 in. Drill Press with Laser 3320-01
Free Shipping
/skil-10-in-drill-press/EohZp4TeK58-JosTpSG8Eg==/info
Skil Shop
IN_STOCK ( In stock )
Store not rated
Free Shipping
10 in. Drill Press with Laser - 3320-01. Cast Iron Base/Work Table. (2) AA Batteries. Chuck Key. Laser X2 dual beam laser for precise drilling and hole alignment. Depth adjustment system provides simple depth control. Five variable-speed gearing system offers speed control for various material types. 1/2 in. keyed chuck accepts larger diameter bits designed for woodworking and cutting. Adjustable depth stop offers accurate measurements and repetitive drilling motion. 0 to 45 degree tilting square work surface for precise and accurate drilling. Bump-off switch for added safety
More

Yost Drill Press Vise - 2 1/2...

$104.99
Northern Tool Yost Drill Press Vise - 2 1/2 Inch Jaw, Swivel Base, Model 1104
+ $9.99 shipping
/yost-drill-press-vise-2/ZF31muGjQOjngjbCb7KsKg==/info
Northern Tool
IN_STOCK ( In stock )
The Yost Drill Press Vise features a removable swivel base that can be rotated and locked in any position. The base can be removed to use as a conventional drill press vise. Jaw Capacity in. 2 1/2, Jaw Length in. 2 1/2, Longitudinal Travel in. 2 1/2, Material Gray iron. High strength 30,000 PSI gray iron castings Machined smooth for accurate movement with no lateral end play Sides and bottoms are machined flat and perpendicular to adjacent sides to allow vise to be used on either side or on end Fast action coarse-pitch main screw thread Replaceable hardened steel jaws Stationary jaw is grooved vertically and horizontally to hold round pieces Meets Federal Specifications GGG-V-443A, Type 1, Class II, Style B Meets NSN 3460-00-221-1104. Model Number: 01104
More

Milwaukee Magnetic Drill...

$319.99
CPO Milwaukee Milwaukee Magnetic Drill Press Motor, 600 RPM with 1/2 in. Chuck 4253-1
Free Shipping
/milwaukee-magnetic-drill/gzzQAI1QReE854TMTPTOWA==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 600 RPM with 1/2 in. Chuck - 4253-1. Product Manual. 1/2 in. capacity, 6.2 amp motor, 600 RPM. 1/2 in. keyed chuck. Taps up to 5/8 in.-18 threaded hole - 5/8 in.-11 and 1/2 in.-13 taps not recommended. Develops up to 1,650 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

Jet J-2500 354400 15 Floor...

$729.00
eBay Jet J-2500 354400 15 Floor Drill Press 1/2hp 115v - Free Shipping
Free Shipping
/jet-j2500-354400-15/W0Y0vWieADqH3MLWc298bg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Jet J-2500 15 Floor Model Drill Press Brand New in Box with Manufacturer's Warranty (Replaces Wilton 2500)Standard Features Cast iron head Large quill allows greater accuracy Head casting features a pemanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life. Table tilts 45° Large ground steel column diameter for maximum head and table support Hinged metal belt and pulley cover Accurate depth stop displays inch/mm a
More

Jet Jdp-15m, 15 In. Bench...

$532.00
eBay Jet Jdp-15m, 15 In. Bench Mount Drill Press
Free Shipping
/jet-jdp15m-15-in-bench/m6RxjXYY8cIn50D-JkFUow==/info
eBay
IN_STOCK ( In stock )
Free Shipping
JET JDP-15M, 15 In. Bench Mount Drill Press MPN:354165 SKU:354165 Got limited space in the shop? You need the versatility of the JDP-15M 15 In. bench mounted drill press. In addition to cutting perfectly perpendicular holes, its 16 speeds allow you to use it for non-drilling chores such as sanding, mortising, shaping, routing, plating, and other practical jobs. Reconfiguration is pretty slick, too, with a hinged metal belt and pulley cover providing easy access to the quick adjustment motor mou
More

29DY68 Drill Press Guard,...

$131.82
Zoro 29DY68 Drill Press Guard, 25/8in.Chuck
Free Shipping
/29dy68-drill-press-guard/URwGKkHfpMWgF3vYzv8oHg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Drill Press Guard, Max. Chuck Dia. (In.) 25/8, Quill Dia. (In.) 13/4 to 31/2, Max. Stroke (In.) 101/2, Min. Stroke (In.) 43/4, Bright Orange
More

Rikon 8 Drill Press 1/2 in.

$104.99
Sears Rikon 8 Drill Press 1/2 in.
Free Shipping
/rikon-8-drill-press-12/JfGMzarpAt5wDrM4OpNQmQ==/info
Sears
IN_STOCK ( In stock )
Free Shipping
This 8-Inch Drill Press is Durable Enough for the Most Hard-working ShopTradesmen of all kinds can find use for the Rikon 8 drill press. It is just as helpful in the carpenter's wood shop for woodworking as it is in the mechanics shop for metal work. Whether you need to drill through a thin piece of wood or a heavy piece of metal, this drill press is ready for any job.The 8-inch drill press features five spindle speeds from 620 to 3100 rpm, which means you can vary the speed depending on the size of hole required and type of material your are drilling. Large holes drilled into harder materials require a lower speed, and small holes in softer material such as wood can be done much quicker at a higher speeds. The keyed chuck is easy to adjust and has a capacity of half an inch for a wide... Less
More

Milwaukee Adjustable Position...

$1,399.99
CPO Milwaukee Milwaukee Adjustable Position Magnetic Drill Press with 3/4 in. Motor 4206-1
Free Shipping
/milwaukee-adjustable/zvM6plPT9-aI4UkCtXYTHQ==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Adjustable Position Magnetic Drill Press with 3/4 in. Motor - 4206-1. Electromagnetic Drill Press Base - 4203. 3/4 in. Motor - 4262-1. Product Manual. 3/4 in. capacity, 12.5 amp motor, 350 RPM. Solid state electronic switching. Feedback speed control. Line lock-out prevents tool from operating should voltage be restored to an interrupted line. This item may ship in the original manufacturer's packaging.
More

Milwaukee Magnetic Drill...

$529.99
CPO Milwaukee Milwaukee Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck 4262-1
Free Shipping
/milwaukee-magnetic-drill/LEJOWi-dh-lhDV7TrfDntQ==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Magnetic Drill Press Motor, 350 RPM with 3/4 in. Chuck - 4262-1. Product Manual. 3/4 in. capacity, 11.5 amp motor, 350 RPM. Dual mount gear case, reverse mount for tight quarter drilling. Taps up to 1-in-14 threaded hole. Develops up to 1,670 lbs. of drill point pressure with a 1 in. steel plate. This item may ship in the original manufacturer's packaging.
More

Craftsman 17 Drill Press with...

$579.99
Sears Craftsman 17 Drill Press with Laser and LED Light 5/8 in.
+ $227.88 shipping
/craftsman-17-drill-press/wMY3jSasjc_9RDc3IVo-yw==/info
Sears
IN_STOCK ( In stock )
17 Drill Press with Laser and LED Light Gives You Smooth PowerThe Craftsman 17 drill press with laser and LED light has the speed you need, whether you're cutting metal, wood or plastic. That's 1 1/2 horsepower worth of speed at 240 to 3,020 rpm to keep everything neat, smooth and precise at depths of up to 4.72 inches.The 17 drill press with laser and LED light gives you the flexibility to do it your way. Three handles with molded grips let you keep the drill press steady, even when you tilt the table up to 5 degrees to the right or 45 degrees to the left. Sturdy cast iron and steel construction gives it the durability to last for years, so whether you're on the job or in your garage you can count on sturdy, stable performance.
More

Wilton Industrial Drill Press...

$139.99
CPO Jet Wilton Industrial Drill Press Vise, 6 in. Jaw Width, 6 in. Jaw Opening, 2 in. Jaw Depth 11676
+ $6.99 shipping
/wilton-industrial-drill/hdQMyw2oCv59NW7JmUzqOQ==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Industrial Drill Press Vise - 11676. Precision machined for accurate and versatile usage on the base, sides, and end. Durable construction with fine grain cast iron castings, and hardened steel jaws. Precision ground for square and parallel accuracy to ±.0001 per inch. Center of the base is open for workholding through the vise. Hardened V-Grooved Jaws hold round shaped objects both vertically and horizontally. Attach to drill press with one of Wilton's clamping kits 660038, 660012, or 660058. (not included). Zinc plated fine thread screw provides smoothing clamping. Designed for applications including drilling, tapping, reaming, and grinding
More

Milwaukee Adjustable Position...

$1,499.99
CPO Milwaukee Milwaukee Adjustable Position Magnetic Drill Press with #3 MT Motor 4208-1
Free Shipping
/milwaukee-adjustable/tMxrXmCBFo3dqlvAqipacw==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Adjustable Position Magnetic Drill Press with *3 MT Motor - 4208-1. Electromagnetic Drill Press Base - 4203. No. 3 MT Motor - 4297-1. Product Manual. 1-1/4 in. capacity, 12.5 amp motor, 500/250 RPM. Solid state electronic switching. Feedback speed control. Line lock-out prevents tool from operating should voltage be restored to an interrupted line. This item may ship in the original manufacturer's packaging.
More

Universal Drill Press Base

$34.99
Northern Tool Universal Drill Press Base
+ $6.99 shipping
/universal-drill-press-base/Q2Iky5oiYA3e6S2Q75Vk6g==/info
Northern Tool
IN_STOCK ( In stock )
Allows for set up and dedication of a small drill press for tube notching. Adjustable for out-of-square tables, the RTN-Base also makes it easy to lay the notcher over horizontally while still bolted to the table to handle long or cumbersome tubing that can't be notched in a vertical position. Minimum requirements 1/3HP drill press with 3-1/2in. to 4in. of travel and 14in. from the table or base to the chuck. Bolts for attachment included. For use with our Item# 152391. U.S.A.. Model Number: RTN BASE
More

Milwaukee Adjustable Position...

$1,499.99
CPO Milwaukee Milwaukee Adjustable Position Magnetic Drill Press with #3 MT Motor 4209-1
Free Shipping
/milwaukee-adjustable/RRZzLQlLhwalF4HFJ1wB4g==/info
CPO Milwaukee
IN_STOCK ( In stock )
Store not rated
Free Shipping
Adjustable Position Magnetic Drill Press with *3 MT Motor - 4209-1. Electromagnetic Drill Press Base - 4203. No. 3 MT Motor - 4292-1. Product Manual. 1-1/4 in. capacity, 12.5 amp motor, 750/375 RPM. Solid state electronic switching. Feedback speed control. Line lock-out prevents tool from operating should voltage be restored to an interrupted line. This item may ship in the original manufacturer's packaging.
More

Drill Presses: Drill Press:...

$119.99
Home Depot Drill Presses: Drill Press: Genesis 8 in. Drill Press GDP500
Free Shipping
/drill-presses-drill/yoGZvSbiOt4-P3H9pTRZzw==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. The Genesis GDP500 8 in. 5-Speed Drill Press is an essential shop tool for anyone making repeated holes in wood, metal or plastic. 5 speeds allow you to match the tool to the material you are cutting and the bit being used. A 2.5-amp induction motor and heavy cast iron base makes this a smooth, quiet and stable machine. A fully adjustable tilting table and adjustable depth stop for convenience and a large capacity 1/2 in. chuck so you can use larger bits. Chuck key Included.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-25816