Structural Plastic Adhesive, Plastic Bonder, Size 35 Ml, Black, Temp Range -67 To 250 F, Curing Time 3 Hours, Application Time 3 Minutes, Viscosity 27,500, Specific Gravity 1.00, Shear Strength 2,100 Psi, Substrates Many Grades Of Polyethylene, Polypropylene And Thermoplastic Elastomers (tpe's), Two-part Structural Acrylic-based Adhesive. No Surface Preparation Required. Will Bond At Room Temperature, For Bonding Low Surface Plastics, Package Quantity 12

High Speed Steel Involute Gear Cutter with 14-1/2 Pressure Angle. HSS TMX Involute Gear Cutters, 14.5 Pressure Angle, Diametrical Pitch = 3 with 4-3/4" cutter diameter x 1-1/4" hole diameter - cutter # 3 for 35-54 range of teeth. Designed to mill spur gears, 8 cutters are required to provide a full set of gears from 12 teeth to a rack

New Genuine Original DQ-UH35H PANASONIC DP-190 DRUM BLACK Each

2-Pack - Filtrete® 4" Allergen Reduction Filter from 3M - 20x20x4 # DP02DC Nominal size: 20" x 20" x 4" Actual size: 19 3/4" X 19 3/4" X 4 3/16" This filter is designed to fit filter housing units accomodating 20x20x4 nominal size filters. Replaces: Honeywell filter # FC100A1011 in air cleaner models F25, F35, F100, F150, F200 This new high performance filter is 97% effective at attracting and capturing large airborne allergena like pollen, mold spores and dust mites. This carries 3M's microparticle rating of 1550 (approximately equivalent to MERV 11 rating). Media is electrostatically charged. This filter should be changed at least every twelve months. Certain conditions in your home will significantly add particle to the air. This will cause the filter to capture more... Less

Hose Reel, General Industrial, Low Pressure, Auto Retractable, Spring Return Drive Type, Reel Inlet 1/2 In. (f)npt, Hose Inside Dia. 1/2 In., Hose Length 35 Ft., Hose Ends 3/8 (m)npt, Max. Pressure (psi) 300, Max. Temp. (f) 150, Powder Coated Finish, Permanently Lubricated Bearings, Vibrationproof, Self Locking Latch, Aflas Seal Type, Nickel Plated Steel Swivel Material, Floor, Wall, Ceiling, Bench And Truck Mounting, Air Water, Height 16-3/8 In., Length 14-3/8 In., Width 9 In.

High Speed Steel Involute Gear Cutter with 14-1/2 Pressure Angle. HSS TMX Involute Gear Cutters, 14.5 Pressure Angle, Diametrical Pitch = 4 with 4-1/4" cutter diameter x 1-1/4" hole diameter - cutter # 3 for 35-54 range of teeth. Designed to mill spur gears, 8 cutters are required to provide a full set of gears from 12 teeth to a rack

The Sigma DP2x compact Digital camera features a 14 Megapixel FOVEON X3 direct image Sensor (2,652 1,768 3 layers). The new Sigma DP2x is the latest DP2 series model and incorporates AFE (Analog Front End) and high-speed auto focus. AFE is also used in the DP1x compact Digital Camera and SD15 digital SLR and converts full Color data, which the FOVEON X3 capture system records, into a digital signal. This enables the camera to reproduce High Definition and richly colored images. In addition, the new AF Algorithm provides high-speed auto focus, ensuring convenient shooting.-Accessor ies included with the camera: Li-ion Battery BP-31, Lens cap LCP-11, Neck Strap NS-11, soft case, Hot shoe cover, USB Cable, A/V cable & SIGMA Photo Pro CD ... Less

Hose Reel, General Industrial, Low Pressure, Auto Retractable, Spring Return Drive Type, Reel Inlet 1/2 In. (f)npt, Hose Inside Dia. 1/4 In., Hose Length 35 Ft., Hose Ends 1/4 In. (m)npt X 1/4 In. (m)npt, Max. Pressure (psi) 300, Max. Temp. (f) 150, Powder Coated Finish, Permanently Lubricated Bearings, Vibrationproof, Self Locking Latch, Aflas Seal Type, Nickel Plated Steel Swivel Material, Floor, Wall, Ceiling, Bench And Truck Mounting, Air Water, Height 16-3/8 In., Length 14-3/8 In.

Get The 35-1/4" x 25-1/2" Diamond Glass Pattern Replacement Glass Block Windows From Lowe's Today.

Hose Reel, General Industrial, Low Pressure, Auto Retractable, Spring Return Drive Type, Reel Inlet 1/2 In. (f)npt, Hose Inside Dia. 3/8 In., Hose Length 35 Ft., Hose Ends 1/4 In. (m)npt X 1/4 In. (m)npt, Max. Pressure (psi) 300, Max. Temp. (f) 150, Powder Coated Finish, Permanently Lubricated Bearings, Vibrationproof, Self Locking Latch, Aflas Seal Type, Nickel Plated Steel Swivel Material, Floor, Wall, Ceiling, Bench And Truck Mounting, Air Water, Height 16-3/8 In., Length 14-3/8 In.

High Speed Steel Involute Gear Cutter with 14-1/2 Pressure Angle. HSS TMX Involute Gear Cutters, 14.5 Pressure Angle, Diametrical Pitch = 32 with 1-3/4" cutter diameter x 7/8" hole diameter - cutter # 3 for 35-54 range of teeth. Designed to mill spur gears, 8 cutters are required to provide a full set of gears from 12 teeth to a rack

High Speed Steel Involute Gear Cutter with 14-1/2 Pressure Angle. HSS TMX Involute Gear Cutters, 14.5 Pressure Angle, Diametrical Pitch = 24 with 1-3/4" cutter diameter x 7/8" hole diameter - cutter # 3 for 35-54 range of teeth. Designed to mill spur gears, 8 cutters are required to provide a full set of gears from 12 teeth to a rack

The latest version, the Sigma DP1x, remains true to that objective and maintains its wide focal length lens, but reflects several Upgrades from the initial introduction of the DP series back in 2008. Specifically, it now houses the "True II" image Processing engine, the new AF Algorithm provides high speed auto focusing, ensuring convenient shooting and the Power Save Mode lowers the Battery consumption allowing for a greater number of pictures to be taken with a single battery charge. The new rear design makes the User Interface easier to interpret and use with quick, easy button recognition as the addition of red buttons enables easier operation of the camera controls. The DP1x is accompanied by the latest RAW image processing software, Sigma Photo Pro 4.0 which has superior image... Less

Hose Reel, General Industrial, Low Pressure, Auto Retractable, Spring Return Drive Type, Reel Inlet 1/2 In (f)npt, Hose Inside Dia 3/8 In, Hose Length 35 Ft, Hose Outlet 1/4 (m)npt, Max Pressure 4000 Psi, Max Temp 210 F, Powder Coated Finish, Permanently Lubricated Bearings, Vibrationproof, Self Locking Latch, Aflas Seal Type, Nickel Plated Steel Swivel Material, Floor, Wall, Ceiling, Bench And Truck Mounting, Length 14 3/8 In, Width 9 In, Height 16 3/8 In

High Speed Steel Involute Gear Cutter with 14-1/2 Pressure Angle. HSS TMX Involute Gear Cutters, 14.5 Pressure Angle, Diametrical Pitch = 20 with 2" cutter diameter x 7/8" hole diameter - cutter # 3 for 35-54 range of teeth. Designed to mill spur gears, 8 cutters are required to provide a full set of gears from 12 teeth to a rack

The Panasonic DP 8035 Copier has some incredible standard features! How about 35 fast copies per minute! The Panasonic 8035 Copier also has standard network printing and document management software!

Diamond 5 Diamond Grinding Discs and Resin Polishing Pads (7 STEP PROCESS) - Ohio Power Tool

High Speed Steel Involute Gear Cutter with 14-1/2 Pressure Angle. HSS TMX Involute Gear Cutters, 14.5 Pressure Angle, Diametrical Pitch = 14 with 2-1/8" cutter diameter x 7/8" hole diameter - cutter # 3 for 35-54 range of teeth. Designed to mill spur gears, 8 cutters are required to provide a full set of gears from 12 teeth to a rack

Lamp module is new and includes both housing and bulb. Manufactured to the highest ISO9001 standards to fit projector model(s) listed under Specifications tab. Carries a Free manufacturers warranty as specified above, and has undergone strict quality checks for beam performance, ignition, voltage, appearance, connections, and run-time, so you can trust it to work flawlessly in your projector. Extended warranty is available at an additional cost. Item ships the same day if you place your order by 4 pm ET, Monday through Friday. Orders placed after 4 pm ET and before 5 pm ET may ship the same day. Orders placed over the weekend, on a holiday or after 5 pm ET during the week will ship the next business day. Please contact us to confirm when it will ship... Less

Digital Security Controls Ltd. (DSC) announces the launch of their latest motion detector, the Digital Encore swivel-mount PIR. The Encore PIR motion detector brings an exciting new look to DSC's extensive offering of PIR detectors. Its clean lines, sleek styling, and tremendous installation flexibility let it fit discreetly into any installation. The Encore motion detector can be mounted with or without the provided wall/ceiling swivel-mount bracket (included). When mounted to the bracket, it has a + 35deg. horizontal adjustment and a -30deg. to +10deg. vertical adjustment (one of the largest adjustment ranges in the Industry). Another unique feature of the swivel-mount bracket is the built-in wire channel, which eliminates exposed wiring resulting in a more secure and esthetically... Less

Phylrich Deck Tub Set With Hand Shower - Trim OnlyValencia CollectionBeige Marble HandleIncludes K6541 Hand ShowerIncludes K6005 Deck BracketIncludes K5141 Deck SpoutIncludes 59" (1499mm) Hand Shower HoseHand Shower, Deck Bracket, Deck Spout, Handles and Hose are All Included30" (762mm) Maximum Centers From Diverter to Hand Shower1-1/2" (38mm) Hole Size for Valves and Diverter1-1/8" (29mm) Hole Size for Spout1-3/8" (35mm) Hole Size for Hand ShowerIntegral Check Valves for Backflow ProtectionLess Rough-In ValveRough-In Valve RequiredRough-In Valve Must be Added to Complete Trim