Category

Tools and Accessories
Showing results for "dovetail cutter"
Results 1 - 40 of 1500+

Cryo-Treated Dovetail Cutter...

$41.50
Brownells Cryo-Treated Dovetail Cutter - 65° X .330''''
+ $7.95 shipping
/cryotreated-dovetail/bCYE0NHvD-ogBjY8W_doOQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Carbide Front Sight Dovetail...

$80.99
Brownells Carbide Front Sight Dovetail Cutter - 65°carbide Front Sight Dovetail Cutter
+ $7.95 shipping
/carbide-front-sight/85527lO2W7it6h5d-9xpaw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300'''' (7.3mm) dia. cut, 3/8'''' (9.5mm) dia. shank. 60° or 65° shoulder. Mfg: Brownells
More

Carbide Front Sight Dovetail...

$77.99
Brownells Carbide Front Sight Dovetail Cutter - 60°carbide Front Sight Dovetail Cutter
+ $7.95 shipping
/carbide-front-sight/JyJ0EZsXLzC4sVX3c1kc_g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300'''' (7.3mm) dia. cut, 3/8'''' (9.5mm) dia. shank. 60° or 65° shoulder. Mfg: Brownells
More

Powermatic 1791305 1-Phase...

$5,599.99
CPO Outlets Powermatic 1791305 1-Phase 1-Horsepower 230V Pneumatic Clamping Dovetail Machine
Free Shipping
/powermatic-1791305/NY1YdaQ_PQit0qyrbMpLaA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
DT65 1 HP Pneumatic Clamping Dovetail Machine - 1791305. Four-Sided Template. Work Stops. Cutter. Tool Kit. Four separate dovetail centerlines at 1 in, 1-1/2 in, 2 in, and 2-1/2 in.. 1 HP, 1 Phase, 230V TEFC motor. Eccentric spindle collet for resharpened cutters. Cutter height of 3/16 in. to 3/4 in.. Pneumatic clamping provides quick locking and unlocking of the workpiece. Extra-large soft grip handle provides positive control and comfort. The precision carriage bearings are sealed on both ends to eliminate dust buildup. Visual stylus and template aids in guiding the carriage. Spring-loaded carriage makes for smooth, effortless dovetail cutting. Material stops provide convenient positioning of the workpiece. Cast-iron and steel construction for added stability and durability
More

Powermatic 1791305 DT65...

Free Shipping
2 stores Powermatic 1791305 DT65 Single End Dovetailer with Pneumatic Clamping 1 HP P
More

Powermatic 1791304 DT45...

Free Shipping
3 stores Powermatic 1791304 DT45 1-Phase 1-Horsepower 115 230 Volt Manual Clamping Dovetail Machine
More

Powermatic 1791304 1-Phase...

$3,429.99
CPO Outlets Powermatic 1791304 1-Phase 1-Horsepower 115/230V Manual Clamping Dovetail Machine
Free Shipping
/powermatic-1791304/HaEzlBO0v17x9yb-SBvFaA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
DT45 1 HP Manual Clamping Dovetail Machine - 1791304. Four-Sided Template. Work Stops. Dovetail Bit. Dust Chute with Hose. Tool Kit. Four separate dovetail centerlines at 1 in, 1-1/2 in, 2 in, and 2-1/2 in.. 1 HP, 1 Phase, 115/230V TEFC motor. Eccentric spindle collet for resharpened cutters. Cutter height of 3/16 in. to 3/4 in.. Manual eccentric clamping. Extra-large soft grip handle provides positive control and comfort. The precision carriage bearings are sealed on both ends to eliminate dust buildup. Visual stylus and template aids in guiding the carriage. Spring-loaded carriage makes for smooth, effortless dovetail cutting. Material stops provide convenient positioning of the workpiece. Cast-iron and steel construction for added stability and durability
More

Meprolight Dovetail Cutter -...

$44.99
Brownells Meprolight Dovetail Cutter - Dovetail Cutter, .250'''' X 74°
+ $7.95 shipping
/meprolight-dovetail/9uPJoVsw28JTmYilqvfHqw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Cuts the .250'''' x 74° dovetail required when altering ramp-style front sights to accept Meprolight's Universal front sight inserts. Cutter can be used to open up a standard ramp when installing Brownells Colored Sight Inserts. DO NOT EXCEED 700 RPM. HIGHER SPEED WILL BREAK TEETH. Mfg: Brownells
More

Cryo-Treated Dovetail Cutter...

$41.46
Brownells Cryo-Treated Dovetail Cutter - 60° X .290''''
+ $7.95 shipping
/cryotreated-dovetail/BfbQRhuFtFuImKh07xYZ4A==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Cryo-Treated Dovetail Cutter...

$39.97
Brownells Cryo-Treated Dovetail Cutter - 60° X .245''''
+ $7.95 shipping
/cryotreated-dovetail/QtH8jM5-6Imm8z59CPwc3Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Cryo-Treated Dovetail Cutter...

$46.99
Brownells Cryo-Treated Dovetail Cutter - 60° X .330''''
+ $7.95 shipping
/cryotreated-dovetail/SP8ZEtkmmHdMld2BkhRmuQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Cryo-Treated Dovetail Cutter...

$45.99
Brownells Cryo-Treated Dovetail Cutter - 65° X .300''''
+ $7.95 shipping
/cryotreated-dovetail/W8qoluKzzptWVq8wEgkBbQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Cryo-Treated Dovetail Cutter...

$52.99
Brownells Cryo-Treated Dovetail Cutter - 65° X .490''''
+ $7.95 shipping
/cryotreated-dovetail/XrthV_4S3CR9RwPaB8RWtw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Cryo-Treated Dovetail Cutter...

$45.99
Brownells Cryo-Treated Dovetail Cutter - 60° X .359''''
+ $7.95 shipping
/cryotreated-dovetail/bcFcpiwrL6RMck4kFQNHzg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Cryo-Treated Dovetail Cutter...

$54.46
Brownells Cryo-Treated Dovetail Cutter - 60° X .300''''
+ $7.95 shipping
/cryotreated-dovetail/vJf5fMBYM08aMCop8fhEQg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320°F to change the molecular structure of the metal alloy, making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools, so we've added two rings near the working end to differentiate them from our regular cutters. Do Not Exceed 700 RPM or cutters will break. Mfg: Brownells SPECS: Cryo-treated, high-speed steel.
More

Carbide Wilson Dovetail Cutter

$79.99
Brownells Carbide Wilson Dovetail Cutter
+ $7.95 shipping
/carbide-wilson-dovetail/QhBvNZCRV8kylNtd5j4pxQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Solid carbide 2'''' (5cm) long. .375'''' (9.5mm) diameter shaft. 60° shoulder. Mfg: Brownells
More

Hss Front Sight Dovetail...

$36.99
Brownells Hss Front Sight Dovetail Cutter - 65°hss Front Sight Dovetail Cutter
+ $7.95 shipping
/hss-front-sight-dovetail/OUqsLLtxI_EZiRCDMRKdyg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. High speed steel. .300'''' (7.3mm) diameter cut, 3/8'''' (9.5mm) diameter shank. 60° or 65° shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH. Mfg: Brownells
More

Dovetail Cutter 1-7/8...

$32.75
eBay Dovetail Cutter 1-7/8 Diameter 45degree Angle High Speed Steel New/unused$32.75
+ $5.95 shipping
/dovetail-cutter-178/YkeZOTtNLe09Q9SHourhkw==/info
eBay
IN_STOCK ( In stock )
HIGH SPEED DOVETAIL CONDITION = NEW HIGH SPEED DOVETAIL MANUFACTURER = INDIA HIGH SPEED DOVETAIL DIAMETER =1-7/8 HIGH SPEED DOVETAIL FACE WIDTH = 9/16 HIGH SPEED DOVETAIL OVERALL LENGTH = 3-1/4 HIGH SPEED DOVETAIL SHANK DIAMETER = 7/8 NUMBER OF FLUTES =12 HIGH SPEED DOVETAIL CUT DIRECTION = RIGHT HAND CUT COATING = NONE (POLISHED) YOUR COST = $32.75 EACH THANKS FOR ALL YOUR SUPPORT P/N = 284-014 DONT FORGET TO ADD US TO YOUR FAVORITES VISIT OUT OUR E-BAY STORE FOR OTHERS DEALS WE ALWAYS COM
More

Hss Front Sight Dovetail...

$44.99
Brownells Hss Front Sight Dovetail Cutter - 60°hss Front Sight Dovetail Cutter
+ $7.95 shipping
/hss-front-sight-dovetail/gaqi84RJT4HsHPm4yL2zXQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. High speed steel. .300'''' (7.3mm) diameter cut, 3/8'''' (9.5mm) diameter shank. 60° or 65° shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH. Mfg: Brownells
More

High Speed Steel Wilson...

$36.99
Brownells High Speed Steel Wilson Dovetail Cutter - Wilson Dovetail Cutter, .290'''' X 60°
+ $7.95 shipping
/high-speed-steel-wilson/fMonaJsI7DxQJiABLfahpA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
2 (5cm) long. .375 (9.5mm) diameter shaft. 60° shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH. Sight is a .300 x 60 degree dovetail that may require machining of slide. See the correct 080-621-290 dovetail cutter. Mfg: Brownells SPECS: Sight body steel with matte black (blued) finish, .300 x 60 degree dovetail. Installation may require machining of slide.
More

Porter-Cable 12 in. Deluxe...

$179.99
CPO Porter Cable - Delta Porter-Cable 12 in. Deluxe Dovetail Jig Combination Kit 4216
+ $6.99 shipping
/portercable-12-in/eWNZOSXD8S7QQR7ca9P7CQ==/info
CPO Porter Cable - Delta
IN_STOCK ( In stock )
Store not rated
12 in. Deluxe Dovetail Jig - 4216. Through Dovetail/Box Joint Template - 4213. Miniature Template - 4215. Half- Blind/Sliding Dovetail Template - 4211. (4) Router Bits - 43776PC, 43743PC, 43014PC and 43777PC. (4) Template Guides - 42037, 42040, 42046 and 42054. (2) Lock Nuts - 42237. Wrench. Instruction Manual. Includes template 4211 for half-blind, rabbeted half-blind and sliding dovetails. Includes template 4213 for through dovetails and box joints. Includes template 4215 for miniature through and half-blind dovetails, and miniature box joints. Template alignment lines and router bit depth gauges allow for quick, easy set-up. Router bit depth gauges allow the user to set bit depth without measuring. On-board instructions provide clear user guidance for the various applications. Machined... Less
More

60 Degree Hss Dovetail Cutter...

$63.95
eBay 60 Degree Hss Dovetail Cutter End Mills 3/8 1/2 3/4 Cnc
+ $6.00 shipping
/60-degree-hss-dovetail/OIqpjo8EF7a7wD0y9cN-UQ==/info
eBay
IN_STOCK ( In stock )
60 DEGREE HSS DOVETAIL CUTTER CUTTERS MILLING END MILLS NEW Product code 404-1620 Product description Cutter Dia. 3/8,1/2,3/4,1-3/8S hank Dia. 3/8,5/8Overall Length: 2-1/8,2-7/8Cutting Dia(Width): 3/16,1/4,5/16,9/16 Product features Designed to take the place of arbor and threaded hole type cutters Can be used in manual and CNC machinery 60°FOR CUTTING DOVETAILS AND ANGLES IN MATERIALS CAN BE USED IN MANUAL CNC MACHINERY COMES WITH NICE PLASTIC CASE WELDON SHANK All Available to Ship NOW! at
More

Porter-Cable 24 in. Omnijig -...

$649.99
CPO Porter Cable - Delta Porter-Cable 24 in. Omnijig - Dovetail Jig Joinery System 77240
Free Shipping
/portercable-24-in/lTIUmEdwq-6DIKq33eJthg==/info
CPO Porter Cable - Delta
IN_STOCK ( In stock )
Store not rated
Free Shipping
24 in. Omnijig - Dovetail Jig Joinery System - 77240. 24 in. Variable Finger Template - 77241. Left and Right Template Stops - A4, B1 & C1. Dovetail Bit - D4. Straight Bit - S2. 7 Template Guides - G0, G1, G2, G3, G4, G5 & G6. Router Bit Depth Pod. Dovetail Set-Up Guide. Square Screwdriver. Wrench. (2) O-Rings. How-To Video. Operating Manual. Durable base design allows for clamping or bolting directly onto work bench. Router bit depth gauges allow user to quickly and accurately set the depth without taking measurements. Stabilizer bar enhances router control while deflecting chips downward for a cleaner work environment. Single-hand clamping system allows for easy positioning of wood on the jig. Durable steel and alloy construction provides longevity. Fix-spaced, half-blind dovetails can... Less
More

5 Piece Dovetail Cutter Set...

$80.95
eBay 5 Piece Dovetail Cutter Set 45 Degrees 02/24/12
+ $8.95 shipping
/5-piece-dovetail-cutter/C0F5JhoXb_oZGGcV4kHjrg==/info
eBay
IN_STOCK ( In stock )
5 PIECE DOVETAIL CUTTER SET 45 DEGREES NEW 02/24/12 SET CONSISTS OF 1 EACH: 3/8, 1/2, 3/4, 1-3/8 & 1-7/8
More

Woodstock W1805 SHOP FOX®...

$4,185.00
Elite Metal Tools Woodstock W1805 SHOP FOX® 16-1/2 Dovetail Machine
Free Shipping
/woodstock-w1805-shop-fox/jlc2Lskvj3PjUCLW7-lmjw==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
SpecificationsHP1 HPPower110/220 prewired 220VPhase1 PHCycle60 HzPower TransferV-belt drivenSpindle Speed18,500 RPMTable Size24W x 73/4 LThis model is the luxury version of our W1804 11 Dovetail Machine. Instead of cam-lock clamps this machine features pneumatic clamps that are faster and easier to use, a larger workpiece capacity, and magnetic switch control. Also, the motor is inverted so vertical workpieces are inserted/removed from above rather than below, which makes it easier and more ergonomic to operate. 
More

5 Piece Dovetail Cutter Set...

$80.95
eBay 5 Piece Dovetail Cutter Set 60 Degrees 02/24/12
+ $8.95 shipping
/5-piece-dovetail-cutter/OatStgXkjRsWeoIyrPbTNA==/info
eBay
IN_STOCK ( In stock )
5 PIECE DOVETAIL CUTTER SET 60 DEGREES NEW 02/24/12 SET CONSISTS OF 1 EACH: 3/8, 1/2, 3/4, 1-3/8 1-7/8PICTURE MAY NOT BE ACTUAL ITEM. S IF YOU NEED HELP CALL 1-440-951-2138 ASK FOR SALES 8:30 TO 5:00 EST ONLY MONDAY THRU FRIDAY. BUYING MULTIPLE ITEMS? BE SURE TO REQUEST A COMBINED SHIPPING INVOICE FROM US BEFORE YOU PAY.* IF YOU LIVE IN THE STATE OF OHIO YOU MUST PAY THE OHIO SALES TAX.***THIS IS AN AUCTION PLEASE READ BEFORE YOU BUY.*****A $10.00USD HANDLING FEE WILL BE ACCESSED TO ALL SH
More

Porter-Cable 4216 12 in...

$179.99
CPO Outlets Porter-Cable 4216 12 in. Deluxe Dovetail Jig Combination Kit
+ $6.99 shipping
/portercable-4216-12-in/qHrRkJb_fjg08Yh7Q-UMAA==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
12 in. Deluxe Dovetail Jig - 4216. Through Dovetail/Box Joint Template - 4213. Miniature Template - 4215. Half- Blind/Sliding Dovetail Template - 4211. (4) Router Bits - 43776PC, 43743PC, 43014PC and 43777PC. (4) Template Guides - 42037, 42040, 42046 and 42054. (2) Lock Nuts - 42237. Wrench. Instruction Manual. Includes template 4211 for half-blind, rabbeted half-blind and sliding dovetails. Includes template 4213 for through dovetails and box joints. Includes template 4215 for miniature through and half-blind dovetails, and miniature box joints. Template alignment lines and router bit depth gauges allow for quick, easy set-up. Router bit depth gauges allow the user to set bit depth without measuring. On-board instructions provide clear user guidance for the various applications. Machined... Less
More

Carbide Semi-Auto Pistol...

$85.99
Brownells Carbide Semi-Auto Pistol Sight Base Cutter - 60°carbide Semi-Auto Sight Base Cutter
+ $7.95 shipping
/carbide-semiauto-pistol/b0bMArqP3H41uUewkjyNSQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is .330'''' so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistol Mfg: Brownells
More

Carbide Semi-Auto Pistol...

$89.99
Brownells Carbide Semi-Auto Pistol Sight Base Cutter - 65°carbide Semi-Auto Sight Base Cutter
+ $7.95 shipping
/carbide-semiauto-pistol/q1JnLg2RUoUiOfjuKDAkLg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Our special 65° shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like Wichita Hi-Mount, older Bo- Mar and others with a 65° shoulder. Some makers use a 60° dovetail on their rear sights and we also have a cutter to match them. For low-mount adjustable sights use the Standard Sight Base Cutter shown on this page. Actual cutting diameter is .330'''' so more than one pass will be required to install most sights. This is done on purpose to allow for factory variations in base width as well as milling tolerances. CAUTION: For use in milling machine only. Solid carbide cutter resists wear when cutting pistol Mfg: Brownells
More

45 Degree Hss Dovetail Cutter...

$63.95
eBay 45 Degree Hss Dovetail Cutter End Mills 3/8 1/2 3/4 Cnc
+ $8.50 shipping
/45-degree-hss-dovetail/sxYBBB3yQliymf4B_EvY4Q==/info
eBay
IN_STOCK ( In stock )
45 DEGREE HSS DOVETAIL CUTTER CUTTERS MILLING END MILLS NEW Product Code 404-1610 Product description Cutter Dia. 3/8,1/2,3/4,1-3/8S hank Dia. 3/8,5/8Overall Length: 2-1/8,2-7/8Cutting Dia(Width): 3/16,1/4,5/16,9/16 Product features Designed to take the place of arbor and threaded hole type cutters Can be used in manual and CNC machinery 45°FOR CUTTING DOVETAILS AND ANGLES IN MATERIALS CAN BE USED IN MANUAL CNC MACHINERY COMES WITH NICE PLASTIC CASE WELDON SHANK All Available to Ship NOW! a
More

1/2 45d Hss Dovetail Cutter

$27.99
eBay 1/2 45d Hss Dovetail Cutter
+ $3.94 shipping
/12-45d-hss-dovetail/shZgdL5f_jnER6edmfYVog==/info
eBay
IN_STOCK ( In stock )
1/2 45 DEGREE HSS DOVETAIL CUTTER 2-1/8 Overall Length 1/8 Cut Width 3/8 Shank 8 Teeth Quality Import
More

1/2 60d High Speed Steel...

$39.89
eBay 1/2 60d High Speed Steel Dovetail Cutter Made In Usa
+ $3.94 shipping
/12-60d-high-speed-steel/WBpBroftlXyibYHTTxZDLQ==/info
eBay
IN_STOCK ( In stock )
1/260 DEGREE HSS DOVETAIL CUTTER 2-1/8 Overall Length 7/32 Cut Width 3/8 Shank 8 Teeth MADE IN USA 21025
More

5 Degree Carbide Dovetail...

$20.00
eBay 5 Degree Carbide Dovetail Cutter (aa1902-2)
Free Shipping
/5-degree-carbide-dovetail/DOP-dJPoLnXZkwzTuxcG8Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
5 DEGREE SOLID CARBIDE DOVETAIL CUTTER MADE IN USA 2 PCS On Feb-24-11 at 18:20:40 PST, seller added the following information: toolandequipment store Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Your browser does not support JavaScript. To view t
More

PACIFIC HANDY CUTTER, INC S4R...

$4.22
Walmart.com PACIFIC HANDY CUTTER, INC S4R Safety Cutter, 5-3/4 In., Green
+ $5.00 shipping
/pacific-handy-cutter-inc/f7n1Or3L6yyKIt9FltK_3g==/info
Walmart.com
IN_STOCK ( In stock )
Safety Utility Knife, Retractable, Blade Change Push Button, Overall Length 5-3/4 In., Blade Material Carbon Steel, Handle Color Green, Handle Material Plastic, Number of Blades Included 1, Standard Tool(Accessory Needed for Tethering), Overall Width 1-1/4 In., 3 Position, Overall Thickness 5/8 In., Handle Type Ergonomic/Right Handed, Tape Notch, (2) Tray Cut and (1) Top Cut Positions, Stores (5) Blades, Boxes, Cartons, Includes Blade Features Application : Boxes, Cartons Color : Green Features : Tape Notch, (2) Tray Cut and (1) Top Cut Positions Handle Type : Ergonomic/Right Handed Includes : Blade Item : Safety Utility Knife Blade Type : SP017 Utility Handle Color : Green Overall Length : 5-3/4 Overall Width : 1-1/4 Position : 3 Blade Material : Carbon Steel Stores : (5) Blades Knife... Less
More

45° Dovetail Cutter M42 1-3/8...

$91.94
eBay 45° Dovetail Cutter M42 1-3/8 Diameter X 7/16 Width Of Cut X 5/8shank Toolmex
+ $10.22 shipping
/45-dovetail-cutter-m42/UUkBE4UwmLMK5hqAl1qbGQ==/info
eBay
IN_STOCK ( In stock )
LISTING DESCRIPTION GOES HERE Made in Poland TMX Cobalt 45° Dovetail Milling Cutter For milling dovetails, and other angular milling operations.M42 Cobalt.Right hand cut.Provided with weldon flat for secure clamping. We accept PayPal for payment. We will ship within 24 hours of cleared payment Monday through Friday, excluding Holidays.Most of our items in our store will calculate and combine with the correct shipping rates in the US. For our overseas account please request combine shipping bef
More

3/8 60d High Speed Steel...

$25.99
eBay 3/8 60d High Speed Steel Dovetail Cutter
+ $3.54 shipping
/38-60d-high-speed-steel/2Ayi7OahEYRHDzFWneKoLA==/info
eBay
IN_STOCK ( In stock )
3/8 60 DEGREE HSS DOVETAIL CUTTER 2-1/8 Overall Length 3/16 Cut Width 3/8 Shank 8 Teeth Quality Import
More

45° Dovetail Cutter M42 3/4...

$53.88
eBay 45° Dovetail Cutter M42 3/4 Diameter X 1/4 Width Of Cut X 3/8 Shank Toolmex
+ $10.22 shipping
/45-dovetail-cutter-m42/J6Z06eksYlpbTWCudJIFdg==/info
eBay
IN_STOCK ( In stock )
LISTING DESCRIPTION GOES HERE Made in Poland TMX Cobalt 45° Dovetail Milling Cutter For milling dovetails, and other angular milling operations.M42 Cobalt.Right hand cut.Provided with weldon flat for secure clamping. We accept PayPal for payment. We will ship within 24 hours of cleared payment Monday through Friday, excluding Holidays.Most of our items in our store will calculate and combine with the correct shipping rates in the US. For our overseas account please request combine shipping bef
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe143.sp14-28392