dlink power supply jta0302a

? Input :100-120V ~ 0.5A. (50-60Hz) ? Output : 5Vdc 2A - ---C--- + ? Output cord terminated with Yellow tipped 90 Degree right angle Size of pin: 2 x 5 x 9.5 mm Round Barrel jack. Center positive.

Mean Well power supplies are some of the highest quality power supplies made.  They are great for commercial/indust rial use where they will be on all the time. * Input Voltage Range: 90 ~ 264VAC     135 ~ 370VDC* Input Current: 1.4A / 115VAC  /  1A / 230VAC* Overload Protection type : Hiccup mode, recovers automatically after fault condition is removed* Over Temp Protection type : Shut down o/p voltage, re-power on to recover* Minimum Rated Hours Before Fail (MTBF): 711K Hrs* Energy Star 2.0 Compliant, Efficiency Level V  (88%)* Meet EISA 2007 (Energy Independence and Security Act)* ErP step 2 compliant* Short circuit / Overload / Over Voltage / Over Temperature Protections* LED Indicator for power on* AC Mating Connector: IEC 320/C14 Cord* Working Temp -10C ~ +50C (Refer to... Less

Mean Well power supplies are some of the highest quality power supplies made.  They are great for commercial/indust rial use where they will be on all the time. *Input Voltage Range: 88 ~ 132VAC / 176 ~ 264VAC selected by switch *Input Current: 3A @ 115VAC   /  2A @ 230VAC*Overload Protection type : Short circuit/Over load/Over voltage*Over Temp Protection type : Shut down o/p voltage, re-power on to recover*Minimum Rated Hours Before Fail (MTBF): 244K Hrs min*Working Temp Range: -25C ~ +70C (Refer to output load derating curve) *Efficiency Level (83%)*Output Voltage Adj Range: 11.4 ~ 13.2V DC*Cooling by free air convection*LED indicator for power on*All using 105°C long life electrolytic capacitors *High operating temperature up to 70°C*Withstand 5G vibration test*3 years warranty

Mean Well power supplies are some of the highest quality power supplies made.  They are great for commercial/indust rial use where they will be on all the time. *Input Voltage Range: 88 ~ 132VAC / 176 ~ 264VAC selected by switch *Input Current: 3A @ 115VAC  /  2A @  230VAC *Overload Protection type : Short circuit/Over load/Over voltage*Over Temp Protection type : Shut down o/p voltage, re-power on to recover*Minimum Rated Hours Before Fail (MTBF): 244K Hrs min*Working Temp Range: -25C ~ +70C (Refer to output load derating curve) *Efficiency Level (86%)*Output Voltage Adj Range: 22.8 ~ 26.4V DC*Cooling by free air convection*LED indicator for power on*All using 105°C long life electrolytic capacitors *High operating temperature up to 70°C*Withstand 5G vibration test*3 years warranty

UL Listed 12 Volt 3 Amp DC Power Supply Adapter (36 Watts) Ultra high quality 12 Volt 3 Amp Power Supply available. These units are used by our customers in the medical industry, in the scientific testing, in high end video and audio applications where stability and low noise is critical. Connector Size: 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: Positive. Technical Specs: -Power Rating:36W -Input Current:0.8A -Lead Length:140cm -Max Frequency:60Hz -Min Frequency:50Hz -No. of Outputs:1 -Weight: 12 oz -Efficiency 80% -Applications: Commercial -Line Regulation: ±0.5% -Load Regulation: ±0.5% -Lead Free Status Lead Free

The XP-15 Power Supply features an output voltage variable from 0 to 15V at 0.3 ampere maximum current. The voltage is regulated to within 0.1V when going from no load to full load. Varying the input AC voltage from 110 to 130V will have practically no effect on the output voltage. This is because of the specially designed IC circuit used in the XP-15. Severe overloading or even short circuiting the output will not damage the supply. Special turn-off circuits in the IC sense the overload and turn off the output. A great power supply for bread board proto typing

Feature: Input Voltage: 100~120V AC, 200~240V AC (Preset 230V)Output Voltage: 12V DCOutput Current: 0~20.0AShell Material: Metal case / Aluminum baseProtection: Shortage Protection, Overload Protection, Over Voltage ProtectionWidely used in Industrial automation, LED display, communications, etc.Safety Compliance: CCC/ FCC / CEWorking Temperature: 0~40¡æStorage Temperature: -20~60¡æAmbient Humidity: 0~95% Non- CondensationSuppl y THREE LED StripIN-DOOR USE ONLY!* This Power Supply Unit DOES NOT come with installation instruction, wiring cable, on/off switch, or screws. Professional installation of qualified electrician is highly recommended. Compatible Models:Suitable for CCTV, Radio, Computer projectSupplied 1 package which includes1 x Switch Power Supply Driver For LED Strip light

For sale is a brand new lab grade DC regulated power supply from Mastech, Model number HY5005-2. This high quality power supply has two outputs that are continously adjustable at 0-50V DC and 0-5A. What's more, the two outputs can be used either in independent, series or parallel mode, providing either two independent outputs, or one output with twice the voltage or twice the current output, up to 100V or 10A. The unit comes with 4 bright LED displays, providing accurate and clearly visible readout for the voltage and current value, both in well-lit and dark environment. LED displays are much brighter nowadays, more durable than LCD displays; for this reason they are the new trend in the instrument panels. This unit has toggle switch at the back that allows you to operate it in 110V AC or... Less

We've sold thousands of Cambridge Audio DacMagic and Musical Fidelity V-DAC USB DACs over the years. Our customers love their outstanding performance for the money. Being audiophiles, the folks at Pangea Audio wondered how they could make these DACs sound even better. Using better cables makes a big difference, but they wanted to dig even deeper. The answer to better performance from the components is the Pangea Audio P-100, a new highly regulated power supply created by legendary audio designer Peter Madnick exclusively for Pangea Audio. Compared to the power supplies that come with the DacMagic and V-DAC, the P-100 boasts better filtering, better regulation, and a much lower output impedance. You might say that the P-100 is just plain better in every way. And the circuitry is housed... Less

JTA-350 PC Time Clock:  Data Collection Terminal for Jupiter Time & Attendance System    The JTA-350PC card reader time clock is the standard data collection terminal for the Jupiter series of Time and Attendance and Job Costing systems. Employees use these swipe card terminals to punch IN and OUT, and to record department or job transfers. In addition, the JTA-350 badge swipe time clock can display multiple private and public messages via the large, easy to read LCD screen. Employees can request to see their total hours worked to date for the current pay period, and review previous punches. With more memory, stability and optional features than other clocks, this badge reader is for companies serious about their employee’s time. The JTA-350 badge clock can be programmed to... Less

The SP500 from Star Micronics combines renowned reliability and a multitude of high-end features into a compact, value-driven solution. Features such as the logic seeking mechanism, high-speed print head and the electronics contribute to the high print speed of the SP500. This print speed of over 4 lines per second enables the SP500 to outperform the competitors in its class.The hinged cover of the SP500, with its integrated 'rain channel', protects the printer form liquid spills and other debris. Protection from the elements and the single color highlight feature of the SP500 series provide an excellent solution for food service and kitchen applications where airborne debris is a sure factor.An internal universal power supply yields a small footprint, combined with the recessed cable... Less

D-Link JTA0302C 5VDC 3A AC Adapter

UL Listed 12 Volt 6 Amp DC Power Supply Adapter This is the highest grade 12V 6A Power Supply available. When failure is not an option, these are the units to choose. The failure rate for these units is 0%. They are used by our customers in the medical industry, in the scientific testing, in high end video and audio applications where stability is critical. Connector Size: 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: Positive. Technical Specs: -Power Rating:72W -Input Current:0.8A -Lead Length:140cm -Max Frequency:60Hz -Min Frequency:50Hz -No. of Outputs:1 -Weight: 12 oz -Efficiency 80% -Applications: Commercial -Line Regulation: ±0.5% -Load Regulation: ±0.5% -Lead Free Status Lead Free

siniconelectronic s New 5V 2.5A AC Adapter Power Supply for D-Link JTA0302E-E Router A*SPC*18*G Item Specification Input: AC 100-120V, 50-60Hz Output: DC 5V 2.5A Tip Size: 5.5mm/2.5mm , Round Tip Note: Please make sure the DC output and tip size of ac adapter are accordant before you bid.Condition: Brand New AC Adapter Power Supply for D-Link Wireless Router. Compatible Models D-Link JTA0302E-E JTA0302E Router Please make sure the output and the connector is same if yes it will fit for. Country

Module parameters: Module properties: non-isolated step-up module Module Size: length 45MM, 20MM wide, high-13MM. This module has a constant current limit of the pressure function, can be used as adjustable boost power, but also as a charging module to use: Simply limit the set output current (to replace the resistance of the R1R2 can change the output current), Input voltage: 3V-24V Adjustment: first, the correct input power (3V-24V) and then the multimeter to monitor the output voltage and adjust the potentiometer (generally along turn the boost, the inverse transfer buck) Output Voltage: 5-25V output voltage is continuously adjustable (Note: default shipping voltage 12V) Output power: Input 3.7V output 5V 600MA 3W Input 5V output 12V 0.5A 6W ... Less

High Quality 12V 4A DC Power Supply Adapter for any device that requires stable DC power. Examples: Audio and Video Devices, Digital Media, Hard Drives, Computer Peripherals, Amplifiers, Satellite Radio receivers, and many more. This adapter will protect your valuable electronics against spikes and dips in power, and will shut itself off if the power supply becomes unstable. It can be reset by being unplugged and replugged in. It is vastly superior to cheap look alike power supply adapters and normally retails for $40.00. Connector Size: 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: Positive.

Universal AC Input Uninterrupted power to 48 V loads Optional 1146B2 Power Distribution Unit provides 32 standard 110 type load connections Easily wall or rack mounted Buy with Confidence. Your order also includes: MetrolineDirect's Rock Solid One Year Warranty

High Quality 12V 3A DC Power Supply Adapter for any device that requires stable DC power. Examples: Audio and Video Devices, Digital Media, Hard Drives, Computer Peripherals, Amplifiers, Satellite Radio receivers, and many more. This adapter will protect your valuable electronics against spikes and dips in power, and will shut itself off if the power supply becomes unstable. It can be reset by being unplugged and replugged in. It is vastly superior to cheap look alike power supply adapters and normally retails for $25.00. Connector Size: 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: Positive.

UL Listed 12 Volt 4 Amp DC Power Supply Adapter (48 Watts) Ultra high quality 12 Volt 4 Amp Power Supply available. These units are used by our customers in the medical industry, in the scientific testing, in high end video and audio applications where stability and low noise is critical. Connector Size: 5.5mm (Outside barrel) x 2.5mm (Inside Barrel) Center: Positive. -Power Rating:48W -Input Current:0.8A -Lead Length:140cm -Max Frequency:60Hz -Min Frequency:50Hz -No. of Outputs:1 -Weight: 12 oz -Efficiency 80% -Applications: Commercial -Line Regulation: ±0.5% -Load Regulation: ±0.5% -Lead Free Status Lead Free

Universal AC-DC Power adpater for Grandstream IP Phones, ATAs, products. It is light weight and compact in size. Takes less space from power strip (see attached picture.) It is compatible with Grandstream Enterprice phone: GXP2120, GXP2110, GXP2100, GXP2010, GXP1450, GXP285, GXP280, GXP1200, GXP2000, GXP2020, GXP1405, GXP1400, BudgeTone: BT101, BT102, BT200; HandyTone HT286, HT386, HT486, HT496, HT488 * Manufacturer: TPI I.T.E Power Supply* Model No: TSA1-050120WA * Input: 100-240V AC 50/60Hz 0.2A * Output: 5V DC 1.2A * Center + * DC Coaxial Plug: 2.1mm (ID) x 5.5mm (OD) * PLUG / SOCKET TYPE: A used in, among others, North and Central America and Japan) * UL, CUS, FCC Listed. *** This power supply is compatible with Grandstream IP phone products. If you would like to purchase to use with... Less

Features Specifications ：Input Voltage : AC 100-240V (Worldwide AC Input)Input Frequency : 50-60Hz Output : 5V 3A Industry Quality : Over Voltage Protection, Over Heat Protection Confirmed Compatible with:Replacement Charger for 5V 3A AC DC Adapter Charger Power Supply For D-Link JTA0302E-E JTA0302E Router Package include:1 x Adapter Charger Warranty:30 days Money Back Promised 60 Days Free Exchange With Paid Return Label 360 Days Anytime Worry-Free Warranty!Bid With Confidence!!! Nobody Beat

Features: 1.This adapter at home or at work makes power access convenient and tailored to your needs 2.Easy to use 3.Also keep one in your carrying case at all times and never be without a adapter when you travel 4.It enables you to keep your battery fully charged when you really need it most on the road Specifications: 1.Input: AC100-240V 50~60Hz 2.Output: DC12V 5A 3.Power: 60W 4.length: 47.2inches / 1.2m 5.Inside diameter: 0.2inch / 5.5mm 6.Outer diameter: 0.08inch / 2.1mm Package include: 1 x AC Adapter Power Supply for LCD monitor TV+Cord 12V 5A Compatible with: Models: Acer LCD Monitors: AC501, AC711, AC915, AF705, AL506, AL511, AL512, AL532, AL712, AL713, AL715, AL716, AL722, AL732, AL922 BenQ LCD Monitors:  FP2081 , FP450 , FP547 , FP553 , FP557 , ... Less

Updated 10 ~ 32V to 35~60V 80W Boost Power Module Updated: Input and output are used ruby ZLH series 35V 1000UF and YAX 63V 330UF high frequency low impedance series capacitor. With a wing of the heat sink, cooling effect has improved significantly. Low output ripple, at 48V output, the output ripple less than 0.5%. Specification: Input Voltage: DC 10~32 V Output Voltage: DC 35~60 V ( adjustable, O/p Voltage >I/p Voltage by 2V ) Maximum Input Current: 16 A ( >10A Need cooling ) Maximum output Current: 5 A Maximum Power: 125W, 80W Natural cooling Efficiency: 90 % typical Module Properties: Non-isolated step-up module (BOOST) Full Load temperature rise: 45 ? Switching Frequency: 100KHz Output ripple: 2%(max) 20M bandwidth No-load Current: ... Less

Module parameters 1, size: 48 * 22.8 * 13.5mm (with potentiometer). Input: IN + input is level. IN-Input Negative Output: OUT + output is level. OUT-output negative Module properties: non-isolated. Automatically. Step-up. Buck. Module 1, the input voltage :3-35V Adjust the way: first pick the correct input power (3-35V between) and then a multimeter to monitor and adjust the potentiometer output voltage (typically clockwise turn boost, buck turn counterclockwise) . 2 output 2.25-30V continuously adjustable (building load debugging) default delivery voltage 12V. For other voltages can be its own regulation. Input Current: 2A (MAX) Output Current: 1.5A (9-35V output 12V input time) so you can output 5V to 1.5-2A Output power: natural cooling 12W (input voltage greater... Less

Module parameters Module Properties: BOOST Input voltage :3-5V (3V input voltage is less than the rated output current step to achieve) Output Voltage: 5.0V Output current: rated 3A (input voltage greater than 3V), short 5A (less than 10 seconds) Conversion efficiency: 92% (the higher the input voltage, the higher the efficiency) Switching frequency: 500KHz Output ripple: Input 4.2V Output 5V 3A 40mV (MAX) Input 3.7V Output 5V 3A 50mV (MAX) 20M-bandwidth Voltage indication: LED lights with a load (input voltage less than 2.7V LED indicator off) Operating Temperature: Industrial (-40 Celsius to +85 Celsius) (Ambient temperature 85 degrees less than 1A output current) Full load temperature rise: 40 Celsius Quiescent Current: 200uA Load regulation: ± 1% Voltage regulation:... Less

1,Input: IN + input is level, IN-type negative Output: OUT + output is level, OUT-output negative 2, the input voltage :4.5-35V Adjust the way: first pick the correct input power (4.5-35V between) and then a multimeter to monitor and adjust the potentiometer output voltage (typically clockwise turn boost, buck turn counterclockwise) . 3, out 3-33.5V adjustable (building load debugging) Our default shipping 5V voltage regulator for other voltage can own or purchase, please inform the treasurer. 4, the output current: rated current of 3A, peak 5A (need to add heat sink), if the output power greater than 15W, suggested adding the heat sink of about 25W or so 5, the conversion efficiency: up to 92% (the higher the output voltage, the higher the efficiency) 6, the static power... Less

*All Super Power Supply® Products are CE/FCC/RoHS/UL certified. * Our products include a 30 Day Money Back Guarantee and 1 Year Exchange. Super Power Supply® pays for shipping / Email us if you have an issue! * All Products trademarked Super Power Supply® are sold exclusively by Super Power Supply®. * We ship your order the same or next business day (Amazon order processing time varies)! Super Power Supply® AC adapters are tested and designed to meet the power needs of your device. This adapter converts AC power into the DC power required by your device. This supply allows you to operate your device or charge it's battery from electrical power outlets. Super Power Supply® Adapters are a portable power source for when your on the go, at home or office. This adapter has been validated and... Less

The Plush P-3 Power Station 9V DC power supply saves you money and ends the hassle of loading fresh batteries for every gig. Can be used with your favorite Plush pedals.