Category

Tools and Accessories
Showing results for "dayton 85 amp welder"
Results 1 - 40 of 1500+

DAYTON 2HXZ4, Float Safety...

$12.86
Zoro DAYTON 2HXZ4, Float Safety Switch, Max. Amps Running 10
Free Shipping
/dayton-2hxz4-float/BVKNCQc_h7f6rwREmiF6tA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Float Safety Switch, Max. Amps Running 10, HP 1 Phase 115V 1/2, HP 1 Phase 230V 1/2, Voltage 125 to 250 VAC, Wire Gauge 18, Width 41/2, Height 31/2, Body Material ABS, Wire Lead 17 In. Length, Agency Compliance UL
More

DAYTON 11A345 Grinder Pump,2...

$1,083.98
Zoro DAYTON 11A345 Grinder Pump,2 HP,230 Volts,11 Amps,SS
Free Shipping
/dayton-11a345-grinder/H4vGJUqmP9iLp1NipvRNCA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Grinder Pump, 2 HP, 230 Volts, 11 Amps, Dia. 9.31 In., Cord Length 16.4 Ft., Discharge NPT 11/4 In., Max. Head 98 Ft., Max. Temp. 104 F F, Max. Dia. Solids 0.12 In., Base Material Cast Iron
More

MIG Welder 250 Amps Eastwood...

$899.99
Eastwood.com MIG Welder 250 Amps Eastwood 20279
+ $59.04 shipping
/mig-welder-250-amps/mShr4T2NvTsokpZfgejkag==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Our new 250 amp Mig welder is the only truly portable unit on the market today. Operates on either 120 or 240VAC Lightweight unit ships to your door via FedEx or UPS eliminating costly truck shipping freight fees. Welds steel, stainless or aluminum, with optional spool gun, or outdoors with flux core wire. Powerful inverter based power supply is capable of over 250 amp output on 240VAC with a 60 at 250amp duty cycle. Unique wire spool mount is configured to hold either 2lb or 10lb spools of wire and utilizes 0.023 inch up to 0.045 inch steel or stainless wire diameters for complete versatility. Weld quarter panels, patch panels, floor pans, etc with the 0.023 inch wire or switch to 0.045 inch wire to handle any fabrication job you run into up to inch steel plate The mig 250 doesn't stop... Less
More

DAYTON 11A342 Grinder Pump, 2...

$1,083.98
Zoro DAYTON 11A342 Grinder Pump, 2 HP, 230 Volts, 11 Amps
Free Shipping
/dayton-11a342-grinder/NzhA40dAGKUbC4gVoQwRLA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Grinder Pump, 2 HP, 230 Volts, 11 Amps, Dia. 9.31 In., Cord Length 16.4 Ft., Discharge NPT 11/4 In., Max. Head 82 Ft., Max. Temp. 104 F F, Max. Dia. Solids 0.12 In., Base Material Cast Iron
More

Dual Flux Mig Welder Wire...

$239.98
eBay Dual Flux Mig Welder Wire Core Welding 25-85 Amp 110 Volt
Free Shipping
/dual-flux-mig-welder-wire/D8usCXw34UegkiMgs2AAig==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Dual Flux Mig Welder Wire Core Welding 25-85 AMP 110 Volt FREE SHIPPING Dual Flux/Mig Welder Welding Current: 25-85 Amp Duty Cycle : 20% @ 75 Amp Power Consumption: 120VAC, 19 amps at 60Hz G round Cable: 8AWG Single Insulation Torch Power Cable: 8AWG Single Insulation Power Cord: 3-Core, 14AWG Double Insulated, UL Listed Thermal Overload: Both settings: 10 minutes shutdown, 3 minutes back on with light Welder Tip : 0.023---0.040 Wire Size:0.023---0.035 steel and stainless and 0.030: flux cor
More

DAYTON 11A344 Grinder...

$869.01
Zoro DAYTON 11A344 Grinder Pump,1.5 HP,230 Volts,9 Amps,SS
Free Shipping
/dayton-11a344-grinder/Qup6bKQauRWdKZWToxwyUg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Grinder Pump, 1.5 HP, 230 Volts, 9 Amps, Dia. 9.31 In., Cord Length 16.4 Ft., Discharge NPT 11/4 In., Max. Head 98 Ft., Max. Temp. 104 F F, Max. Dia. Solids 0.12 In., Base Material Cast Iron
More

Miller Msw-41 Lightweight...

$639.00
Baker's Gas and Welding S Miller Msw-41 Lightweight Portable Spot Welder
Free Shipping
/miller-msw41-lightweight/sPXCT-gnkXsnBn9GgW0FLw==/info
Baker's Gas and Welding S
IN_STOCK ( In stock )
Store not rated
Free Shipping
Note: Tongs and tips must be ordered separately. One standard set of tips is supplied with each set of tongs. Click HERE for available tongs and tips.MSW models weld up to 1/8 in (3.2 mm) total material thickness or two pieces of 20 gauge (1.8 mm) galvanized metal.LMSW Models weld up to 3/16 in (4.8 mm) total material thickness or two pieces of 16 gauge (3 mm) galvanized metal.T models include a timer panel with a 0 to 5 second weld timer and power on/off switch, and come with a 10ft. (3m) input power cord and 10ft. (3m) interconnecting cord. The timer panel can be mounted on the optional SWP-2 pedestal, or any other convenient location.Hand lever locks tongs firmly on material, ensuring positive, accurate fit-up.Accommodate s a wide variety of tongs and tips.Quick and easy adjustment for... Less
More

DAYTON 4TM85 Direct Drive...

Free Shipping
2 stores DAYTON 4TM85 Direct Drive Tubeaxial Fan 24 In. 230V
Tubeaxial Fan, Voltage 200 to 230/460, 3 Phase, Number of Speeds 1, Blade Dia. 24 In., CFM 0.000In....
More

Dayton Belt Grinder (3/4 Hp)...

$660.50
Grainger Dayton Belt Grinder (3/4 Hp) 120/240 volt, 7/3.5 Amps, 4x36. Model: 2RYN8
+ $24.08 shipping
/dayton-belt-grinder-34/rpbYB7INrGKL8hIjItPs0w==/info
Grainger
IN_STOCK ( In stock )
Belt Grinders, 3/4 Hp, Voltage 120/240, 7.0/3.5 Amps Ac, 1 Phase, 60 Hz, Disc Dia. (in.) -, Disc Speed (rpm) -, Belt Size (in.) 4 X 36, Belt Sfpm 3600, Idler Drum Size (in.) 4x5, Disc Table Size (in.) -, Table Work Surface (in.) 2-1/2 X 5, Disc Table Tilt-in Angle (deg.) 45, Disc Table Tilt-out Angle (deg.) -, Belt Table Tilt Angle (deg.) -, Platen Size (in.) 4 1/2 X 7 1/2, Dust Collection Port Size (in.) 2-1/2, Table Material Steel, Overall Width (in.) 20, Overall Depth (in.) 19
More

Dayton Belt Grinder (1/2hp)...

$269.75
Grainger Dayton Belt Grinder (1/2hp) 120/240, 5.0/2.5 Amps, 1x42. Model: 2RYN6
+ $21.83 shipping
/dayton-belt-grinder/1pzRsSrqoRv3vXp1qxOB8g==/info
Grainger
IN_STOCK ( In stock )
Belt Grinders, 1/2 Hp, Voltage 120/240, 5.0/2.5 Amps Ac, 1 Phase, 60 Hz, Disc Dia. (in.) -, Disc Speed (rpm) -, Belt Size (in.) 1 X 42, Belt Sfpm 1800, Idler Drum Size (in.) 1x4, Disc Table Size (in.) -, Table Work Surface (in.) 3 X 3, Disc Table Tilt-in Angle (deg.) 45, Disc Table Tilt-out Angle (deg.) -, Belt Table Tilt Angle (deg.) -, Platen Size (in.) 10 X 1-1/2, Dust Collection Port Size (in.) 2-1/2, Table Material Steel, Overall Width (in.) 16, Overall Depth (in.) 22
More

DAYTON 3BB85 Pump, Effluent,...

$844.94
Zoro DAYTON 3BB85 Pump, Effluent, 1hp G2663936
Free Shipping
/dayton-3bb85-pump/le_QIUqHBoKGs3007IrAWg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Submersible Effluent Pump, Automatic Operation Type, 1 HP, Tether, Base Material Cast Iron, Housing Cast Iron, Top Material Cast Iron, SiC/Buna, Impeller Material Polypropylene, 240V, 8.3 Amps, Height 163/4 In., 123/16 In. Diameter, Cord Length 20 ft., Discharge NPT 2 In., Shaft Seal Silicon Carbide/Buna N, Max. Dia. Solids 3/4 In., GPM of Water 10 Ft. of Head 85, Max. Head 109 ft., Max. Temp. 104 Degrees F, 1 Phase
More

DAYTON 3YB85G Elec Chain...

$2,009.43
Zoro DAYTON 3YB85G Elec Chain Hoist,1/2T,20ft Lift,16fpm
Free Shipping
/dayton-3yb85g-elec-chain/iy9nC9uZta8jFMOSzOoFbA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Electric Chain Hoist, Capacity 1000 lb., Lift 20 ft., Classification H4, Number of Speeds 1, Lift Speed 16 fpm, Motor HP 0.5, Voltage 115/230, 1 Phase, Min. Between Hooks 18 In., 8.4 Amps Low Volts, Housing Depth 811/16, Housing Length 243/8 In., Housing Width 811/16 In., Brake Multiple Disc Motor, Clutch Overload Limiting, Control Ergonomic Nema 3R 24V Push Button Pendant w/Strain Relief, Control Cord 16 ft., Red, 60 Hz
More

MIG Welder 175 Amp Versa-Cut...

$949.99
Eastwood.com MIG Welder 175 Amp Versa-Cut Plasma Cutter 40 Eastwood 13946
+ $83.85 shipping
/mig-welder-175-amp/aXIpcy8a1xOeOR25jTLdIQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa-Cut Plasma Cutter Click on the individual links below for all the specs, but you must click the Add To Cart button above to get the special savings over individual prices Eastwood's 220v MIG 175 Welder uses its 175-amp output to handle almost any welding job, and comes with a spool gun for aluminum, stainless and steel. MIG welder welds mild and stainless steel, 24-ga. to 5/16Welds aluminum, 14-ga. to 1/430-175-amp welding range The Eastwood Versa Cut Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8 thick. 110v or 220v AC input with inverter technology20' torch cable 10' ground cable with clampRated 40-amp output The perfect match for all your... Less
More

DAYTON 1XHV4 Sump Pump,...

$763.60
Zoro DAYTON 1XHV4 Sump Pump, Stainless 1/2 HP, 4.7 Amps AC
Free Shipping
/dayton-1xhv4-sump-pump/366S36axR7DlzIbqhUPdqQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Dewatering/Utilit y Pump, Chemical Resistant Submersible, 1/2 HP, Voltage 115, Amps 4.7 AC, Cord Length 20 ft., Discharge NPT 2 In., GPM 1 Ft. of Head 75, Maximum Head 36 ft., Height 165/16 In., Diameter 91/8 In., Housing Stainless Steel, Top Material 304 SS, Base Material 304 SS, Impeller Material 304 SS, Length 9.1 In., Width 6.3 In., Max. Dia. Solids 1/4 In., Max. Liquid Temp. 104 Degrees F, Suction Slotted Bottom
More

POWERLAND 210 Amp Welder &...

$1,349.00
Sears POWERLAND 210 Amp Welder & 4000 W Generator 16 HP / Electric Start
+ $216.95 shipping
/powerland-210-amp-welder/61GZbqwJDIjq9iKkFjNgEA==/info
Sears
IN_STOCK ( In stock )
210 AMP Welder and 4000 W Gas Generator. Perfect portable welder and gas generator for your welding project. Features: Powerful 16 HP OHV gasoline engine with low oil shutoff & a super quiet muffler.Engine is EPA and CARB approvedFull power panel with 50 to 210 amp DC welding current adjustment, (3) 120 V AC power outlets & 12V DC battery charger.Heavy duty steel frame with four point fully isolated motor mounts for smooth and quiet operation.Both electric key & recoil pull start.It is designed for stick welding with quick & easy arc start.Idle control holds RPM at a constant level even under heavy loads for fuel savings and noise reduction.Ideal for farm/ranch, maintenance, construction, home and even emergency power outages. Specifications Generator: Rated Watts: 3500wSurge Watts:... Less
More

Dayton Belt Grinder (3/4hp)...

$442.25
Grainger Dayton Belt Grinder (3/4hp) 120/240 volt, 7/3.5 Amps, 2x48. Model: 2RYN7
+ $24.98 shipping
/dayton-belt-grinder/oUSWZDBN6OHw2DDgMZUZ0A==/info
Grainger
IN_STOCK ( In stock )
Belt Grinders, 3/4 Hp, Voltage 120/240, 7.0/3.5 Amps Ac, 1 Phase, 60 Hz, Disc Dia. (in.) -, Disc Speed (rpm) -, Belt Size (in.) 2 X 48, Belt Sfpm 4500, Idler Drum Size (in.) 2x5, Disc Table Size (in.) -, Table Work Surface (in.) 2-1/2 X 5, Disc Table Tilt-in Angle (deg.) 45, Disc Table Tilt-out Angle (deg.) -, Belt Table Tilt Angle (deg.) -, Platen Size (in.) 12-1/4 X 2-1/2, Dust Collection Port Size (in.) 2-1/2, Table Material Steel, Overall Width (in.) 16-1/2, Overall Depth (in.) 25
More

Dayton 6mk85 Gearmotor,ac,345...

$534.52
eBay Dayton 6mk85 Gearmotor,ac,345 Rpm
Free Shipping
/dayton-6mk85/puxUrHg7Rxxvu2kTFt928A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
About Zoro Shipping Returns Terms Payment FAQs Contact Store Categories All categories Click here to view full size. Full Size Image Click to close full size. For warranty information see our terms . DAYTON 6MK85 Gearmotor,AC,345 RPM DAYTON Item Specifics Item AC Gearmotor Type Parallel Shaft Voltage Rating 230/460 Thermal Protection None Seals Single Lip, Spring Loaded, Heavy Duty Mounting All Position Gear Case Die Cast Aluminum Ambient (C)40 Full Load Amps 1.60 Full Load Torque (In.-Lbs.)55
More

DAYTON 2HXZ4, Float Safety...

$12.86
Zoro DAYTON 2HXZ4, Float Safety Switch, Max. Amps Running 10
Free Shipping
/dayton-2hxz4-float/BVKNCQc_h7f6rwREmiF6tA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Float Safety Switch, Max. Amps Running 10, HP 1 Phase 115V 1/2, HP 1 Phase 230V 1/2, Voltage 125 to 250 VAC, Wire Gauge 18, Width 41/2, Height 31/2, Body Material ABS, Wire Lead 17 In. Length, Agency Compliance UL
More

DAYTON 5PXX2 Centrifugal...

$301.91
Zoro DAYTON 5PXX2 Centrifugal Pump, 36 VDC, 3 Amp
Free Shipping
/dayton-5pxx2-centrifugal/Envbjj6NqjQabSnnM3rvKg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pump, Centrifugal, 1/8 HP, Voltage 36VDC, 3 Amps, 3/4 In Inlet, 3/4 In Outlet, Motor Enclosure Closed, Stainless Steel Housing, Impeller Semi Open, Stainless Steel Impeller, Max. Head 22 Ft., Seal Material Carbon/Ceramic, Viton, Stainless Steel, Mechanical Seal, Max. Case Pressure 16 PSI, Max. Fluid Viscosity 31 SSU, Intermittent Duty, 1/8 In Max. Dia. Solids, Manufacturers Warranty Length 1 Year
More

DAYTON, 13F062, Roll About...

$462.31
Zoro DAYTON, 13F062, Roll About Floor Stand,Steel
Free Shipping
/dayton-13f062-roll/8SxW2LTOSNfd1nTVvw86Tg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Roll About Floor Stand, Material Steel, Finish Gray Polyester Coating, For Use With Dayton Heavy Duty Air Cannons, 18 to 20 In.
More

Dayton Model 3xa85 Dc Gear...

$463.47
eBay Dayton Model 3xa85 Dc Gear Motor 90 Rpm 1/4 Hp Tenv 90vdc
+ $13.53 shipping
/dayton-model-3xa85-dc/bBeKx1U2fxk0rRMbsiyifw==/info
eBay
IN_STOCK ( In stock )
Canadian Ground Shipments by Purolator Click Here for Details Ships from Michigan Dayton Electric Motor DC Right Angle Shaft Gear Motor 90 Volt DC Permanent Magnet TENV Shaft: 5/8 x 1 1/2Rotation = Reversible Thermal Protection = None Mounting: All Position Continuous Duty Output Shaft Is Reversible, And Can Be Removed To Use 3/4 Hollow Shaft Mounting Bracket Can Be Base Or End Mounted Machined Pilot Mounting Supplied Thermal Protection = None 90 RPM 1/4 hp 2.33 amps, 90 Volts DC 100 Torque
More

DAYTON 3HGE4 Condensate...

$76.11
Zoro DAYTON 3HGE4 Condensate Pump,1/30 HP, 230V,1 Amp,90W
Free Shipping
/dayton-3hge4-condensate/rAvbjP6Qtt_Id3mQTDwZpw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Condensate Pump, Vertical, 1/30 HP, 90 Watts, Voltage 230, 1.0 Amps, Reservoir Capacity 2 qt., Height 611/16 In., Length 1113/16 In., Width 57/8 In., 3/8 In. Barb Discharge, Float Material Polyethylene, ShutOff 20 ft., Max. Temp. 160 Degrees F, Cord Length 6 ft., Shaft Material Stainless Steel, Standards , Includes 20 ft. of 3/8 In. Tube, 6 Ft Power Cord, Fan Cooled Motor and Control Float
More

DAYTON 4JPG7 Pump,Coolant,1/3...

$573.53
Zoro DAYTON 4JPG7 Pump,Coolant,1/3 HP,230/460V,1.1/0 .56Amp
Free Shipping
/dayton-4jpg7/qhmXHvhZhkCEAnEyAU_lqg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pump, Coolant, HP 1/3, Phase 3, Amps 1.1/0.56, Voltage 230/460, Length 11 In., Width 8 7/16 In., Height 19 7/16 In., Inlet/Outlet 1 1/4 In., RPM 1750, Motor Enclosure TEFC, GPM of Water 1 Ft. of Head 57.6, GPM of Water 3 Ft. of Head 56, GPM of Water 5 Ft. of Head 54, GPM of Water 9 Ft. of Head 47.3, 21.3, Max. Immersion Depth 6 3/8 In., Max. Recommended Viscosity 500 SSU, Max. Temp. 200 F
More

DAYTON 4JPD9 Turbine Pump,...

$1,065.72
Zoro DAYTON 4JPD9 Turbine Pump, 3/4 HP, 1 Ph, 10.7/5.3 Amp G1417543
Free Shipping
/dayton-4jpd9-turbine/lsA8-9-zdhBxSBlqHZbZ1g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Turbine Pump, Close Coupled, 3/4 HP, 1 Phase, Voltage 115/208230, 10.7/5.25.3 Amps, 60 Hz, Inlet 1 In., Outlet 1 In., Max. Pressure 120 PSI, Length 15 1/2 In., Height 8 1/8 In., Width 7 13/16 In.
More

DAYTON 10E030 Exhaust/Supply...

$1,034.18
Zoro DAYTON 10E030 Exhaust/Supply Fan, 18 In,3 Phase
Free Shipping
/dayton-10e030/IysiiUyATFfMstojQoWkMQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Exhaust/Supply Fan, Direct Drive Reversible, Propeller Dia. (In.) 18, Exhaust/Supply CFM 0.000In. SP 3280/3264, Max. Ambient Temp. (F) 104, Speed 1, Voltage 208230/460, 60 Hz, Phase 3, Operating Amps 1.71.9/0.85, Fan RPM 1750, Motor RPM 1750, Motor HP 1/3, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (In.) 22, Width (In.) 22, Mounting Position Horizontal or Vertical, Propeller Material Aluminum, Number of Blades 4, Shaft Dia. (In.) 1/2, Includes Reversing Switch
More

DAYTON 4YC57 Supply Vent,16 In

$880.63
Zoro DAYTON 4YC57 Supply Vent,16 In
Free Shipping
/dayton-4yc57-supply/MeTIoIiMy7Yo1H8svJal_w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Direct Drive Axial Supply Ventilator, Propeller Dia. 16 In., CFM 0.000In. SP 2920, Sones 0.125In. SP 5 Ft. 21, Sones 0.250In. SP 5 Ft. 20, Voltage 115, 60 Hz, 1 Phase, Max. Operating Amps 5.0, Max. Operating Watts , Motor HP 3/4, Max. BHP 0.52, RPM 1750, Max. Inlet Temp. 120 Degrees F, Base Width 26 In., Base Length 26 In., Base Height 13/4 In., Base Top to Shroud 61/4 In., Overall Height 171/4 In., Overall Dia. 351/4 In., Roof Mounting Location, Housing Material Spun Aluminum
More

DAYTON 4YC59 Supply Vent,18 In

$1,059.91
Zoro DAYTON 4YC59 Supply Vent,18 In
Free Shipping
/dayton-4yc59-supply/Nj2HOqwYzF4k47Xldt4nhQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Direct Drive Axial Supply Ventilator, Propeller Dia. 18 In., CFM 0.000In. SP 4247, Sones 0.125In. SP 5 Ft. 30, Sones 0.250In. SP 5 Ft. 30, Voltage 115/208230, 60 Hz, 1 Phase, Max. Operating Amps 12.8/6.46.4, Max. Operating Watts , Motor HP 1, Max. BHP 1.00, RPM 1750, Max. Inlet Temp. 120 Degrees F, Base Width 30 In., Base Length 30 In., Base Height 13/4 In., Base Top to Shroud 61/4 In., Overall Height 171/4 In., Overall Dia. 351/4 In., Roof Mounting Location
More

DAYTON 10E028 Exhaust/Supply...

$837.47
Zoro DAYTON 10E028 Exhaust/Supply Fan, 16 In,3 Phase
Free Shipping
/dayton-10e028/nFM6pw4pbafwLe8j3Ke0VA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Exhaust/Supply Fan, Direct Drive Reversible, Propeller Dia. (In.) 16, Exhaust/Supply CFM 0.000In. SP 1922/1858, Max. Ambient Temp. (F) 104, Speed 1, Voltage 208230/460, 60 Hz, Phase 3, Operating Amps 1.51.6/.85, Fan RPM 1750, Motor RPM 1750, Motor HP 1/4, Bearing Type Ball, Motor Enclosure Totally Enclosed Air Over, Height (In.) 20, Width (In.) 20, Mounting Position Horizontal or Vertical, Propeller Material Aluminum, Number of Blades 4, Shaft Dia. (In.) 1/2, Includes Reversing Switch
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145