datsun competition

Competition Clutch Stage 2 - Street Series 2100 Clutch Kit: The Competition Clutch Stage 2 - Street Series 2100 Clutch Kit provides approximately 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. The 2100 Series kit includes a performance pressure plate a high torque sprung disc with antiburst steel backed Carbon Kevlar facings all applicable bearings and the appropriate alignment tool.

The AAM Competition S-Line Short Tail is perfect for someone looking to dramatically change the sound of their Z without having to break the bank. Built from 304 stainless steel the S-Line Short Tails feature 2.5 inch pipes from the flanges to the 4 inch diameter polished stainless exhaust tips. These short tails replace the factory rear section improving exhaust flow and saving approximately 18 lbs in the process.Produced in our US facility the AAM Competition S-Line short tail exhaust upgrade is a cost effective way to give your 370z an aggressive exhaust tone (Check out the video below for a sound preview!) without the cost of a full cat back exhaust system.This kit is easy to install and fits all 2009 & up 370z.Please Note: To fit the S-Line Short Tail Exhaust properly requires... Less

This is the perfect exhaust for both NA (naturally aspirated / non-supercharged or turbocharged) applications and forced induction (supercharged or turbocharged) applications. Maintaining a refined yet aggressive sound with sleek appearance this true dual design provides the perfect gain in power vs. sound and features dual 2.5 inch mandrel bent T-304 stainless-steel. This is a true cat-back exhaust system as it replaces both the restrictive factory y-pipe mid-pipe and rear exhaust muffler section. Average horespower gain with this exhaust system is 12-16hp and torque!The AAM Competition 2.5 True Dual Exhaust System has been proven up to 500hp on forced induction applications. Factory Y-Pipe & Exhaust System: approx 63lbsAAM Competition 2.5 True Dual: approx 57lbsWeight savings - 6 lbs!

Let's be honest the factory GT-R exhaust note is not exotic. There is plenty of room for improvement. AAM Competition's Resonated Midpipe is the ultimate entry level upgrade for your GT-R. Our midpipe will improve engine power response and efficiency as well as enhance the Nissan GT-R's signature exhaust note. Your GT-R will finally sound as good as it looks.Produced from highly durable 16-gauge T-304 stainless steel here in our US facility. The front pipes on the GT-R Resonated Midpipe measure 3 inches in diameter and the single rear collector measures 3.5 inches.Dyno testing has yielded broad gains of 15-22 AWHP on an otherwise factory equipped GT-R.Weighing in at only 17.6lbs the AAM Competition GT-R Resonated Mid-Pipe trims 12.4lbs of weight from the factory mid-pipe!! (further weight... Less

Let's be honest the factory GT-R exhaust note is not very exotic. There is plenty of room for improvement.AAM Competition's 3 (76mm)to 3.5 (90mm) Non-Resonated Midpipe is the ultimate first upgrade for your GT-R. Our midpipe will improve engine power response and efficiency as well as enhance the Nissan GT-R's signature exhaust note. Your GT-R will finally sound as good as it looks.Produced from highly durable 16-gauge T-304 stainless steel here in our US facility.Dyno testing showed broad gains of 15-22 AWHP on an otherwise factory equipped GT-R.Adds 15-22 horsepowerEnhance d exhaust notePrecision TIG welded T-304 Stainless SteelTwin 3(76mm) to Single 3.5(90mm) DesignHigh quality Stainless Steel Flex SectionLaser Cut T-304 Stainless Steel FlangesMade in the USA

All of the benefits of William Micklem's thoughtful design, in an upgraded style. The Micklem Competition bridle is made from high quality, hand-rubbed leather in a rich tobacco color. Crown piece, browband and noseband are softly padded for horse comfort and for a finished look. In addition, the D-ring has been removed from the noseband for a cleaner, show-ring-ready look. Stainless steel hardware. Bit-less converter is not included. Rubber reins are included. Suitable for use in show jumping and cross country competition. Check with your individual organization for other eligibility. Click here to learn more about measuring for a bridle.

Magnecor's KV85 Competition (8.5mm) and R-100 Racing (10mm) Ignition Cables feature Magnecor's exclusive 2.5mm high capacity Metallic Inductance EMI Suppressed conductor consisting of stainless steel wire precisely wound at 200 turns per inch over a ferromagnetic core. The insulating jacket is made entirely of Magnecor's exclusive TC-1500-HS high strength aerospace grade silicone rubber and its single layer construction will prolong the jacket's insulating ability by conducting extreme heat away from hot-spots that occur near over-the-limit heat sources. The KV85 8.5mm jacket has a service heat resistance of 600 degrees F (320 degrees C) and up to 1 000 degrees F (540 degrees C) for short burst 3 minutes. The R-100 10mm jacket has a service heat resistance of 700 degrees F (380 degrees C)... Less

The white t-shirt is a timeless classic for a reason; it should be a staple in every wardrobe. It is clean, simple, and durable. The best part is you can wear it with anything. This 100% cotton T-shirt is so comfortable you'll want to wear it to bed.. About our White T-Shirt: The white t-shirt is a timeless classic for a reason; it should be a staple in every wardrobe. It is clean, simple, and durable. The best part is you can wear it with anything. This 100% cotton T-shirt is so comfortable you'll want to wear it to bed.. Datsun z 280z 260z 240z nissan sunset Tee, TShirt, Shirt

All of the benefits of William Micklem's thoughtful design, in an upgraded style. The Micklem Competition bridle is made from high quality, hand-rubbed leather in a rich tobacco color. Crown piece, browband and noseband are softly padded for horse comfort and for a finished look. In addition, the D-ring has been removed from the noseband for a cleaner, show-ring-ready look. Stainless steel hardware. Bit-less converter is not included. Rubber reins are included. Suitable for use in show jumping and cross country competition. Check with your individual organization for other eligibility. Click here to learn more about measuring for a bridle.

Perfect for the active equestrian and carefully styled to suit all competition arenas, the Animo Classic Competition Coat returns with all the signature details you've come to expect from this Italian designer. It combines cutting-edge fabric technology with a European-style 4-button front, ultrasuede collar and double-vented back with contrasting trim, along with classic tailored touches such as button cuffs and traditional pockets. In Animo's super lightweight technical BETA CX fabric, this show jacket is anti-static, anti-odor and easy-care, offering superior stretch, recovery and breathability. Hidden zipper under placket for a smooth line. Body-conscious fit; order one size up for a less slim fit. Logo on sleeve.

Datsun 240 260 280ZX 610 710 810 Nissan Maxima 3/4 Bore Clutch Slave Cylinder Brand new, not remanufactured Bore Size: Concentric Replaces dealer part numbers: 30620-18V00, 30620-18V01, 30620-69F03, 30620-69F70, 30620-P9500, 30620-S0100, 30620-U7000, 306

The rectangular aluminum hand guard has a satin finish. Half tang construction. Blade is not sharpened. Three lengths to choose from. Total Length: 28 inches Blade Details: 19 inches long, Aircraft Grade Aluminum Total Length: 33-1/2 inches Blade Details: 23 inches long, Aircraft Grade Aluminum Total Length: 38 inches Blade Details: 26 inches long, Aircraft Grade Aluminum

This is a premium gold finished eyelet collar pin with detailed ball shaped ends. One end unscrews to allow the device to slide through the holes in your eyelet pin dress shirt collar (not designed for a standard dress shirt). This fits on a narrow or standard point collar shirt.

Here we have an auction for a very nice unique vintage leather keychain with the DATSUN Z Logo as shown in the center. This has a leather backing with metal emblem in the center and is a nice vintage and I do not believe any longer produced piece great for anyone's collection. This is a nice quality piece, new and ready to display The leather is ideal for early models as they do not scratch the dash and steering column like metal keychains can and do. Feel free to ask any questions.

No one does Body Lift Kits better than Performance Accessories. They are proud to offer the most complete line of body lift kits in the world. When you purchase a lift kit for your truck or SUV you want to go home and install it, with no problems. Performance Accessories work hard to make that reality. When installing your Performance Accessories Body Lift Kit, remember to order your set of custom fit urethane Gap Guards to hide the gap between frame and body, and keep the engine compartment clean.No one does Body Lift Kits better than Performance AccessoriesThe most complete line of body lift kits in the worldEasy installationOrder a set of custom fit urethane Gap Guards to hide the gap between frame and body, and keep the engine compartment clean

Provides Additional Safety. Add additional safety and strength to your uni-body SN95 Mustang with a Competition Engineering eight point roll bar featuring 1-3/4 x 0.134 wall mild steel tubing. This Mustang roll bar meets both NHRA and IHRA requirements for track use. Kit Includes. This Competition Engineering 8 point roll bar includes the main hoop, main hoop crossbrace, two rear struts, two front door bars, two diagonal hoop supports, six weld joint gussets. Superior Strength And Construction. Competition Engineering spent countless hours developing and perfecting their kits to offer the utmost in strength and fit without adding unnecessary weight. All tubing exceeds the requirements of racing sanctioning bodies and is mandrel formed on computer controlled equipment for uniform wall... Less

1-800-458-2734 Datsun 240Z 260Z Chevy V8 Engine Conversion Manual 1970 1971 1972 1973 1974 1975 Datsun Z V-8 Conversion Manual by Mike Knell. This book shows you how to install carbureted small block Chevy V8s into Datsun Z cars. You'll find invaluable advice on how to choose and buy a good V8 for your conversion, from a Chevy, or Buick, Olds, or Pontiac. The author will lead you through your project in by outlining the elements of the system, and then giving tips on installation as well as s

The aftermarket replacement product offered on this page does not have a UPC (Universal Product Code) associated with it. Without a UPC, the manufacturer of this aftermarket product cannot be verified, and the brand name has been labeled as unknown. However, the product on this page does have an ABPA (Automotive Body Parts Association) Partslink number that specifies the year, make and model as well as product type and details that confirm the fitment of this product.

1984-1986 Datsun 720 Go Rhino Truck Bed Bars. Go Rhino Bed Bars Features - Go Rhino Bed Bars add intimidating off-road style to your pickup. 3 diameter steel tubing for extra strength. Black powder coat, chrome or polished stainless finish. Complete bolt-together construction with no exposed welds. Includes hard plastic gaskets to prevent metal-to-metal contact. Go Rhino Bed Bars, Go Rhino Truck Bed Bar. For the top selection of Datsun 720 1984-1986 Go Rhino Truck Bed Accessories shop online today. The Go Rhino Bed Bars, Go Rhino Truck Bed Bar will improve and personalize your vehicle. Datsun Truck Bed Bars by Go Rhino - selected by many auto enthusiasts in the top automotive discussion forums. Go Rhino Bed Bars for your 86 Datsun 720 will deliver the results you are looking for! Go Rhino... Less

These are premium eyelet collar pins. One end unscrews to allow the device to slide through the holes in your eyelet pin dress shirt collar (not designed for a standard dress shirt).

Provides Additional Safety. Add additional safety and strength to your uni-body SN95 Mustang with a Competition Engineering eight point roll bar featuring 1-3/4 x 0.134 wall mild steel tubing. This Mustang roll bar meets both NHRA and IHRA requirements for track use. Kit Includes. This Competition Engineering 8 point roll bar includes the main hoop, main hoop crossbrace, two rear struts, two front door bars, two diagonal hoop supports, six weld joint gussets. Superior Strength And Construction. Competition Engineering spent countless hours developing and perfecting their kits to offer the utmost in strength and fit without adding unnecessary weight. All tubing exceeds the requirements of racing sanctioning bodies and is mandrel formed on computer controlled equipment for uniform wall... Less

One new speedometer cable, part number 5563-010, 07-00531 or factory # 25050-M4900. This fits: Datsun F10 with A.C. 1976 - 1978 Before purchase, be sure to check ***Review Payments Shipping Tab!*** VEHICLE COMPATIBILITY NOTES to verify fitment on your particular year/make/model. CUSTOMER SUPPORT If you have questions about the product or your order please contact us via eBay Messages for assistance. Thank you.Business Hours: 8 a.m. to 4 p.m. EST (Mon - Fri)Phone: 937-550-4509 CONTACT US If you

One new distributor cap, part number EP331. This fits Datsun 240Z 1971 - 1973 *** Application information is listed to the best of our knowledge. We try our best to be as thorough as possible. While the part may fit alternate applications we can only verify what is stated in the listing. *** IMPORTANT INFORMATION: ALL BUYERS: ESTIMATED DELIVERY DATES GIVEN BY EBAY IN THESE LISTINGS ARE INACCURATE! PLEASE DO NOT BASE YOUR PURCHASE ON EBAY'S ESTIMATED TIME OF DELIVERY. THEY DO NOT FACTOR IN WEEKE

The aftermarket replacement product offered on this page does not have a UPC (Universal Product Code) associated with it. Without a UPC, the manufacturer of this aftermarket product cannot be verified, and the brand name has been labeled as unknown. However, the product on this page does have an ABPA (Automotive Body Parts Association) Partslink number that specifies the year, make and model as well as product type and details that confirm the fitment of this product.