Category

Tools and Accessories
Showing results for "cylinder reamer"
Results 1 - 40 of 1500+

Lisle Cylinder Ridge Reamer...

$70.61
Quill.com Lisle Cylinder Ridge Reamer 2-11/16 To 5-5/16In.
Free Shipping
/lisle-cylinder-ridge/BwJHzlCyHqdcXyTACD8PHA==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Product Type: Tools. Use: Cylinder
More

Lisle Cylinder Ridge Reamer...

$70.61
Quill.com Lisle Cylinder Ridge Reamer 2-11/16 To 5-5/16In.
Free Shipping
/lisle-cylinder-ridge/BwJHzlCyHqdcXyTACD8PHA==/info
Quill.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Product Type: Tools. Use: Cylinder
More

Ridge Reamer Engin Cylinder...

$61.69
Sears Marketplace Ridge Reamer Engin Cylinder 3to5 Bore
No Shipping Info
/ridge-reamer-engin/aWim2r9SO11b1wgpJISYhA==/info
Sears Marketplace
IN_STOCK ( In stock )
Ridge Reamer Engin Cylinder 3to5 Bore
More

ENGINE CYLINDER REAMER RIDGE...

$73.76
Sears Marketplace ENGINE CYLINDER REAMER RIDGE 3 TO 5IN.
No Shipping Info
/engine-cylinder-reamer/AbWs1a4-wQTzVNQ49L42bw==/info
Sears Marketplace
IN_STOCK ( In stock )
Lifetime warranty does not cover abuse
More

Automotive Repair Tools -...

$94.94
Sears Marketplace Automotive Repair Tools - ENGINE CYLINDER REAMER RIDGE 3 TO 5IN. - ISN
No Shipping Info
/automotive-repair-tools/Q8RzvvW5j8RwW9rYUUtjuw==/info
Sears Marketplace
IN_STOCK ( In stock )
Engine Cylinder Ridge Reamer
More

KD Tools Engine Cylinder...

$55.26
Walmart.com KD Tools Engine Cylinder Reamer Ridge 3 To 5In.
Free Shipping
/kd-tools-engine-cylinder/bG5icuL5Cu5Gug2qq_Fzhg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
More

Automotive Repair Tools -...

$88.96
Sears Marketplace Automotive Repair Tools - CYLINDER RIDGE REAMER 2-11/16 TO 5-5/16IN. - ISN
No Shipping Info
/automotive-repair-tools/k3jZBmxW_HVKGy45WUbmpg==/info
Sears Marketplace
IN_STOCK ( In stock )
2-11/16 to 5-5/16 Cylinder Ridge Reamer
More

2-11/16 to 5-5/16 Cylinder...

$51.51
Sears Marketplace 2-11/16 to 5-5/16 Cylinder Ridge Reamer
No Shipping Info
/21116-to-5516/cBNYqlmodOLQigSMg7Qziw==/info
Sears Marketplace
IN_STOCK ( In stock )
Features and Benefits: Rollers assure easy turning in cylinder Exclusive stabilizer spring allows operator to take selective cut to minimize chatter Spring-loaded carbide cutter follows contour of cylinder Complete ridge removed in just a few easy turns Offset jaw guides assure rigidity throughout the range When replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time.
More

Yellow 10 Ton Hydraulic Punch...

$155.00
eBay Yellow 10 Ton Hydraulic Punch Press & Ridgid Spiral Reamer Tool
+ $28.95 shipping
/yellow-10-ton-hydraulic/Q8zpte5NIcV_ntQ89ex43Q==/info
eBay
IN_STOCK ( In stock )
Yellow 10 Ton Hydraulic Punch Press RIDGID SPIRAL REAMER TOOL PUNCH SET 10 TON CYLINDER 22MM 27.5MM 34MM 43MM 49MM 60.5MM ASSOCIATED SCREWS,HOSE, CASE AND INSTRUCTION ALSO INCLUDED IS A USED RIDGID SPIRAL REAMER TOOL.
More

Lisle 36500 2-11/16in to...

$70.61
Sears Marketplace Lisle 36500 2-11/16in to 5-5/16in Cylinder Ridge Reamer
No Shipping Info
/lisle-36500-21116in-to/cBQvgLiIvGw0dB7DjrEJxw==/info
Sears Marketplace
IN_STOCK ( In stock )
Rollers assure easy turning in cylinder Exclusive stabilizer spring allows operator to take selective cut to minimize chatter Spring-loaded carbide cutter follows contour of cylinder Complete ridge removed in just a few easy turns Offset jaw guides assure rigidity throughout the range When replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time.
More

Pipe Reamer, Spiral Ratchet,...

$121.68
Zoro Pipe Reamer, Spiral Ratchet, Capacity 1/4 to 2, OAL 211/2
Free Shipping
/pipe-reamer-spiral/1_MlgHjNEaOG26iPxnOKyw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Pipe Reamer, Spiral Ratchet, Capacity 1/4 to 2 In, Overall Length 211/2 In, Blade Type Self Feeding Design, Blade Material Hardened Steel, Handle Type Straight, Handle Material Steel, For Pipe, Tubing, Conduit, Countersinking and Deburring
More

RIDGID 2S/34955 Reamer,...

$262.29
Zoro RIDGID 2S/34955 Reamer, Spiral Pipe
Free Shipping
/ridgid-2s34955-reamer/xcJtSNkI1cCriu47EjWCNw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Ratcheting Spiral Pipe Reamer, Pipe Capacity 1/4 to 2 In, Overall Length 20 1/4 In, Self Feeding, Includes Handle
More

2212 Heavy-duty Ridge Reamer...

$54.95
eBay 2212 Heavy-duty Ridge Reamer Made In Usa
+ $8.10 shipping
/2212-heavyduty-ridge/2j4V4rb9mLekOYW3nxFkMQ==/info
eBay
IN_STOCK ( In stock )
2212 HEAVY-DUTY RIDGE REAMER Removes ridges from top of cylinder to achieve smooth wall surface on engine bores from 3 to 5 (76 to 127mm) including canted and most short stroke types. Tungsten carbide blade is reversible for long life. Reamer can be set to change from one cylinder to another without readjusting.THIS TOOL IS MADE IN USA Buy with confidence! This is a terrific item, it is a must have for professional mechanics. This Tool is a Brand New Warranty Policy:Limited Lifetime Warrant
More

Ridge Reamer

No Shipping Info
/ridge-reamer/D9poWse3oIBEEa0b7JXElw==/info
Sears Marketplace
IN_STOCK ( In stock )
Rollers assure easy turning in cylinder. Exclusive stabilizer spring allows operator to take selective cut to minimize chatter. Spring-loaded carbide cutter follows contour of cylinder. Complete ridge removed in just a few easy turns. Offset jaw guides assure rigidity throughout the range. 2 11/16 to 5 5/16
More

Stens part #750-331, Ridge...

$84.45
Sears Marketplace Stens part #750-331, Ridge Reamer
No Shipping Info
/stens-part-750331/fYyBOG10b8FN_yIv6dlEwA==/info
Sears Marketplace
IN_STOCK ( In stock )
Product Details Ridge Reamer Product Features Ridge Reamer Product Description For small motors 2 to 3 bore , This will prevent recurring trouble , For correct ring job, the upper ridge in the cylinder must be removed SKU: ADIB001OK4KYC
More

Pipe Reamer

+ $9.99 shipping
/pipe-reamer/bUoFPBzHIwC41upkgc0NGg==/info
Windy City Cigars
IN_STOCK ( In stock )
Store not rated
This heavy duty pipe reamer may very well be the nicest pipe reamer on the market today. Made of durable metal, this design allows it to adjust to fit nearly any size pipe bowl, and the removable drill bit in the cap is perfectly sized for reaming shanks.Please browse our wide selection of cigars, pipe tobacco and accessories to find everything you need to enjoy a rich, satisfying experience with WindyCityCigars. com.
More

Gearwrench 2389 Engine...

$69.95
eBay Gearwrench 2389 Engine Cylinder Reamer Ridge 3 To 5in.
Free Shipping
/gearwrench-2389-engine/Y0aPcV36YRcPpzH5jxquhg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Product Description Features and Benefits: Reamer removes ridges from top of engine cylinders with bore diameters 3 to 5 Tungsten carbide cutters and fine thread feed-up ensure smooth cutting action Unique design lets yo change from one cylinder to another without readjusting Shipping Most items ship within 1 business day from the time you place your order. We ship with UPS and FedEx (heavy items may ship using truck freight). We are unable to ship to PO Box address, please provide a physical a
More

Adjustable Hand Reamer Set,...

$43.37
Zoro Adjustable Hand Reamer Set, Number of Pieces 3, Straight Shank
+ $5.00 shipping
/adjustable-hand-reamer/5H_4nEOY_0-XjPYpUOvWnA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Adjustable Hand Reamer Set, Number of Pieces 3, Straight Shank, Hardened And Precision Ground Tool Steel , Black Oxide Finish, Sizes Included 3/8 to 15/32
More

Baker Adjustable Reamer Size...

$31.49
MidwayUSA Baker Adjustable Reamer Size 3/A .406 to .437 Diameter for 410 Bore Choke Alterations
+ $3.99 shipping
/baker-adjustable-reamer/Nzm3YgAVheXTgaB0rgH35A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality.
More

BeadSmith Bead Reamer Set...

$3.75
Beadcorp BeadSmith Bead Reamer Set (4pcs.)
No Shipping Info
/beadsmith-bead-reamer-set/9NqmIdut7x0sDlssAfCxEQ==/info
Beadcorp
IN_STOCK ( In stock )
Store not rated
BeadSmith Bead Reamer Set (4pcs.)
More

Golfsmith .350 Manual...

$12.98
Golfsmith Golfsmith .350 Manual Straight Hosel Bore Reamer
+ $6.99 shipping
/golfsmith-350-manual/Q2tECpihBkSNFIGyDhM7jA==/info
Golfsmith
IN_STOCK ( In stock )
Golfsmith Straight Fluted Hand Reamer - .350 The Golfsmith Straight Fluted Hand Reamer is excellent for finishing and re-conditioning hosel bores for re-shafting purposes, providing a high degree of accuracy and surface finish. It is made to exacting specifications, to offer a good allowance between the shaft and hosel for the perfect epoxy bond. This reamer removes as much as 0.003 (0.1mm) of material per side from standard-sized hosel bores and is further distinguished by the slightly longer leads to guide and centralize the reamer in the hole. While specifically designed for hand reaming operations, this reamer can also be used on a drill press at 150 RPM's or below. N/A
More

Stainless Single Pipe Reamer

$9.99
Windy City Cigars Stainless Single Pipe Reamer
+ $9.99 shipping
/stainless-single-pipe/GatYSmUPMkSQPk085_h8cg==/info
Windy City Cigars
IN_STOCK ( In stock )
Store not rated
This Stainless Single Pipe Reamer is lightweight and durable.Please browse our wide selection of cigars, pipe tobacco and accessories to find everything you need to enjoy a rich, satisfying experience with WindyCityCigars. com.
More

PTG T-Handle Reamer Extension

$41.49
MidwayUSA PTG T-Handle Reamer Extension
+ $7.19 shipping
/ptg-thandle-reamer/UFQASJDg54rmXsnjBZ-n6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 9 extension fits any PTG reamer with a 3/8 square drive shank. It allows the reamer to be used when a standard tap handle will not work.
More

Usa Expansion Reamer 31/32

$115.00
eBay Usa Expansion Reamer 31/32
+ $7.00 shipping
/usa-expansion-reamer-3132/HqwTIKgMnTgo3_QSnwJE1A==/info
eBay
IN_STOCK ( In stock )
31/32 USA REAMER YANKEE LIST $175.35 SALE $115 HIGH SPEED STEEL, STRAIGHT FLUTE, STRAIGHT SHANK, EXPANSION CHUCKING REAMER Expansion Chucking Reamers are size renewable. After reamer is worn undersize, the end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use NUMBER OF FLUTES - 8 FLUTE LENGTH - 1-1/2 OAL - 10 SHANK DIA. - 3/4
More

GENERAL 130 Reamer,Pipe,T...

$12.13
Zoro GENERAL 130 Reamer,Pipe,T Handle
+ $5.00 shipping
/general-130-reamerpipet/-6efNTvEpuqv50jZpkBaJw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
T Handle Pipe Reamer, Capacity 1/8 to 1/2 Inch, Length 5 5/8 Inches
More

GENERAL 131 Reamer,Pipe

$10.30
Zoro GENERAL 131 Reamer,Pipe
+ $5.00 shipping
/general-131-reamerpipe/AOdQItyyjZcvPSrxqv75hA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Screwdriver Handle Pipe Reamer, Capacity 1/8 to 3/8 Inch, Length 6 1/4 Inches
More

General Tools T-Handle Reamer

$13.79
MidwayUSA General Tools T-Handle Reamer
+ $3.99 shipping
/general-tools-thandle/qVV0IC0ComzPxMzAHsQqNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
With a precision- machined, tempered tool steel reamer attached to a stout T-handle for leverage, the chores of removing burrs and rough edges from holes will take far less time and effort to accomplish. The reamer measures 1/2 at its largest diameter and tapers steadily to a minimum diameter of 1/8, and can be used on most common materials including steel, brass, aluminum, plastic and wood. Technical InformationFeatur es:(from the manufacturer's website) Made of hardened and tempered tool steel with precision ground cutting edges T-handle provides leverage for easier reaming
More

Chucking Reamer High Speed...

$7.50
eBay Chucking Reamer High Speed 13/32 Diameter With Pilot Of.390 Usa $7.50
+ $5.95 shipping
/chucking-reamer-high/VJ2naFU4kvtLWXBTpY7VGA==/info
eBay
IN_STOCK ( In stock )
REAMER CONDITION = NEW REAMER MANUFACTURER = ALVORD POLK (USA) STRAIGHT SHANK CHUCKING STYLE REAMER REAMER MATERIAL =HIGH SPEED STEEL REAMER DIAMETER = .4062 (13/32) PILOT DIAMETER = .390 REAMER FLUTE LENGTH = 1-3/8 NOT INCLUDING PILOT LENGTH PILOT FLUTE LENGTH = 3/8 (.375) REAMER OVERALL LENGTH = 7 INCLUDING PILOT REAMER SHANK DIAMETER = .312 NUMBER OF FLUTES =6/CHAMFERED REAMER FLUTE STYLE =STRAIGHT FLUTE / RIGHT HAND CUT (2) FEMALE CENTER HOLES (1) EACH END YOUR COST 9.50 P/N REA-406
More

Usa Expansion Reamer 1-7/16

$183.95
eBay Usa Expansion Reamer 1-7/16
Free Shipping
/usa-expansion-reamer/aGOYpNnX-ZCbkovYh6Ru1w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
1-7/16 USA REAMER YANKEE LIST $282.87 SALE $183.95 HIGH SPEED STEEL, STRAIGHT FLUTE, STRAIGHT SHANK, EXPANSION CHUCKING REAMER Expansion Chucking Reamers are size renewable. After reamer is worn undersize, the end screw can be tightened to enlarge the reamer, which can then be reground to original size for re-use NUMBER OF FLUTES - 8 FLUTE LENGTH - 2 OAL - 12 SHANK DIA. - 1
More

Golfsmith .335 Manual...

$12.98
Golfsmith Golfsmith .335 Manual Straight Fluted Reamer
+ $6.99 shipping
/golfsmith-335-manual/RYUcLbt3C65dOIFzaWv7Eg==/info
Golfsmith
IN_STOCK ( In stock )
Golfsmith Straight Fluted Hand Reamer - .335 The Golfsmith Straight Fluted Hand Reamer is excellent for finishing and re-conditioning hosel bores for re-shafting purposes, providing a high degree of accuracy and surface finish. It is made to exacting specifications, to offer a good allowance between the shaft and hosel for the perfect epoxy bond. This reamer removes as much as 0.003 (0.1mm) of material per side from standard-sized hosel bores and is further distinguished by the slightly longer leads to guide and centralize the reamer in the hole. While specifically designed for hand reaming operations, this reamer can also be used on a drill press at 150 RPM's or below. N/A
More

Reaming HDX Inner/Outer...

$10.72
Home Depot Reaming HDX Inner/Outer Reamer HDX085
+ $5.99 shipping
/reaming-hdx-innerouter/AWmbXXM_nbhP8RngAChuUg==/info
Home Depot
IN_STOCK ( In stock )
Shop for Hand Tools at The Home Depot. HDX provides a complete line of quality professional plumbing tools at a competitive price. All products have been reviewed and tested by a third party testing lab. In addition, internal testing facilities have inspected and tested all products in the program for durability, function ability and product longevity. The Inner/Outer Reamer is ideal for removing burrs from the inside and outside of 1/8 - 5/8 in. copper, plastic, iron, steel and brass tubing and piping. This reamer features 3 precision-ground cuttings blades for excellent performance and a grooved body for an easy grip.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145