Category

Tools and Accessories
Showing results for "cylinder reamer"
Results 1 - 40 of 1500+

Stens Ridge Reamer

$102.99
Sears Stens Ridge Reamer
Free Shipping
/stens-ridge-reamer/DQdPOBndWUlC670peuZi9Q==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Stens Replacement Ridge Reamer For small motors 2 to 3 bore , This will prevent recurring trouble , For correct ring job, the upper ridge in the cylinder must be removed
More

Stens Ridge Reamer

$102.99
Sears Stens Ridge Reamer
Free Shipping
/stens-ridge-reamer/DQdPOBndWUlC670peuZi9Q==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Stens Replacement Ridge Reamer For small motors 2 to 3 bore , This will prevent recurring trouble , For correct ring job, the upper ridge in the cylinder must be removed
More

Revolver Cylinder Throating...

$80.00
Brownells Revolver Cylinder Throating Reamer - .45 Cal. Throat Reamer
+ $7.95 shipping
/revolver-cylinder/SdT0rPnvCYOKmdJNLak0Jw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Easy to use, hand turned reamer opens the cylinder throat to a uniform diameter for best accuracy with lead and jacketed bullets. Removable pilots let you select the correct pilot for the closest possible fit to individual chambers. .45 Caliber corrects out of spec, smaller-than-bore- diameter cylinder throats on .45 Colt and other .45 caliber revolvers. Opens throat to .4525. Provided with .4480 diameter pilot. .44 Caliber fits .44 Magnum, .44 Special and .44-40 revolvers. Opens throat to .431. Furnished with .4270 pilot. .357 Caliber from .3545 to .357. Open the throat to .358. .357 furnished with a .354 pilot. Pilot Pac Mfg: Manson Precision SPECS: High-speed steel. 4 (10cm) long, ¼ shank, 6 flute, helical ground.
More

GearWrench 2389D Engine...

$51.46
Walmart.com GearWrench 2389D Engine Cylinder Ridge Reamer
+ $6.67 shipping
/gearwrench-2389d-engine/bG5icuL5Cu5Gug2qq_Fzhg==/info
Walmart.com
IN_STOCK ( In stock )
Features:Reamer removes ridges from top of engine cylinders with bore diameters 3 to 5 Tungsten carbide cutters and fine thread feed-up ensure smooth cutting action Unique design lets yo change from one cylinder to another without readjusting
More

Cylinder Ridge Reamer Cutting...

$52.05
eBay Cylinder Ridge Reamer Cutting Professional Auto Mechanics Sharp Tool Engine
Free Shipping
/cylinder-ridge-reamer/BiJchctv2XB_ey5uur-4aQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Cylinder Ridge Reamer Cutting Professional Auto Mechanics Sharp Tool Engine New This Cylinder Ridge Reamer has a range of 3.0 inch to 5.0 inch (76.0 mm to 127.0 mm). Reversible tungsten carbide cutter with fine pitch screw for smooth cutting action. Equally easy to use on conventional as well as slant-block engines. The lathe action follows the contours and imperfections of the worn cylinder to remove the entire ridge with one go. This Cylinder Ridge Reamer stays sharp indefinitely and never ne
More

Lisle 36500 Cylinder Ridge...

Free Shipping
2 stores Lisle 36500 Cylinder Ridge Reamer 2-11 16 To 5-5 16in.
More

Kd Tools KDS2389 Engine...

$59.00
Walmart.com Kd Tools KDS2389 Engine Cylinder Ridge Reamer
+ $10.62 shipping
/kd-tools-kds2389-engine/373DAbzNgUgfBVhtfMxRxg==/info
Walmart.com
IN_STOCK ( In stock )
Engine Cylinder Reamer Ridge 3 To 5in.
More

PTG Tooling Floating Reamer...

$119.99
MidwayUSA PTG Tooling Floating Reamer Holder
+ $7.59 shipping
/ptg-tooling-floating/B-1kLFw-trLe_i63V8tEQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Reamer Holder completely supports the reamer in the lathe for hands-free reaming. 3 thumb screws offer complete adjustment for perfect alignment with the bore. #3 MT shank Technical InformationMateri al: Steel Notes: Fully supports reamer and is adjustable to center the pilot Provides 360° support of the reamer
More

Lisle 36500 2-11/16 To 5-5/16...

$58.95
Walmart.com Lisle 36500 2-11/16 To 5-5/16 Cylinder Ridge Reamer
+ $10.26 shipping
/lisle-36500-21116-to/wubJ8dQLTJ4XY3i9D62d9Q==/info
Walmart.com
IN_STOCK ( In stock )
features and benefits: rollers assure easy turning in cylinder exclusive stabilizer spring allows operator to take selective cut to minimize chatter spring-loaded carbide cutter follows contour of cylinder complete ridge removed in just a few easy turns offset jaw guides assure rigidity throughout the rangewhen replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time.
More

General Tools T-Handle Reamer

$13.99
MidwayUSA General Tools T-Handle Reamer
+ $4.99 shipping
/general-tools-thandle/qVV0IC0ComzPxMzAHsQqNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
With a precision- machined, tempered tool steel reamer attached to a stout T-handle for leverage, the chores of removing burrs and rough edges from holes will take far less time and effort to accomplish. The reamer measures 1/2 at its largest diameter and tapers steadily to a minimum diameter of 1/8, and can be used on most common materials including steel, brass, aluminum, plastic and wood. Technical InformationFeatur es:(from the manufacturer's website) Made of hardened and tempered tool steel with precision ground cutting edges T-handle provides leverage for easier reaming
More

Tubing Reamer, Inner/Outer,...

$67.39
Zoro Tubing Reamer, Inner/Outer, Imperial, 208-FSS
Free Shipping
/tubing-reamer/Wsx8box9ot_Nu-r3UB9L_A==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Tubing Reamer, Inner/Outer, Capacity (In.) 3/16 to 11/2, Overall Length (In.) 21/4, Blade Type 5 Flutes, Blade Material Hardened Steel, Handle Type Fluted Body, Handle Material Aluminum, For Stainless Steel, Copper, Steel, Aluminum Pipe, Tubing, Conduit, Clockwise and Counterclockwise
More

Lisle 36500 2-11/16 in. to...

$64.98
Walmart.com Lisle 36500 2-11/16 in. to 5-5/16 in. Cylinder Ridge Reamer
+ $6.45 shipping
/lisle-36500-21116-in/GGoyuEtUMB_-2wwifHYTuA==/info
Walmart.com
IN_STOCK ( In stock )
Satisfy the growing demand for high quality tools that you need with the best-selling tools from Lisle! FeaturesRollers assure easy turning in cylinderExclusive stabilizer spring allows operator to take selective cut to minimize chatterSpring- loaded carbide cutter follows contour of cylinderComplete ridge removed in just a few easy turnsOffset jaw guides assure rigidity throughout the rangeWhen replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinderThe pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first timeIncludes2- 11/16 in. to 5-5/16 in. Cylinder Ridge Reamer - 36500Specificatio nsBase Size: CARB Compliant: Capacity: 2-11/16 in. - 5-5/16... Less
More

GearWrench 2389 Engine...

$44.99
CPO Outlets GearWrench 2389 Engine Cylinder Reamer Ridge 3 To 5in.
+ $6.99 shipping
/gearwrench-2389-engine/LkGGFAW66L3F9sxJn8i6lw==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Engine Cylinder Reamer Ridge 3 To 5in. - 2389. Dimensions: 7.5 L x 4.6 W x 2.8 H. Reamer removes ridges from top of engine cylinders with bore diameters 3 to 5. Unique design lets yo change from one cylinder to another without readjusting. Tungsten carbide cutters and fine thread feed-up ensure smooth cutting action
More

Gearwrench Engine Cylinder...

$66.08
eBay Gearwrench Engine Cylinder Ridge Reamer / Automotive Specialty Tools Mechanics
Free Shipping
/gearwrench-engine/wy0fisfY-4IoipuNSN-c0w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
STORE HOME NEW ARRIVAL HOT ITEMS SHIPPING ADD TO FAVS CONTACT US FEEDBACK Store home GearWrench Flexible Retrieving Tool / Automotive Specialty Tools Mechanics 19.5 Craftsman 4 pc. Pick Set / Automotive Specialty Tools Mechanics Auto 14.16 GearWrench Double Flaring Tool Kit / Automotive Specialty Tools Mechanics 74.24 GearWrench Steering Wheel Puller Kit / Automotive Specialty Tools Mechanics 66.25 Apex Tools Tie Rod Separator / Tie Downs, Straps, Bars Nets Emergency, 34.3 GearWrench Engine Cyl
More

Draft Beer Reamer Drill Bit

$45.95
Beverage Factory.com Draft Beer Reamer Drill Bit
+ $3.77 shipping
/draft-beer-reamer-drill/AiLGdW-XhJuX_fE9hAf2cA==/info
Beverage Factory.com
IN_STOCK ( In stock )
1/4 Draft Beer Reamer Drill Bit
More

GearWrench Engine Cylinder...

$62.45
National Tool Warehouse GearWrench Engine Cylinder Reamer Ridge 3 To 5in. KDT2389
+ $9.95 shipping
/gearwrench-engine/CkM36nVHmT_39XDnk7vLRQ==/info
National Tool Warehouse
IN_STOCK ( In stock )
Store not rated
Engine Cylinder Reamer Ridge 3 To 5in.
More

PTG T-Handle Reamer Extension

$32.99
MidwayUSA PTG T-Handle Reamer Extension
+ $7.59 shipping
/ptg-thandle-reamer/UFQASJDg54rmXsnjBZ-n6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 9 extension fits any PTG reamer with a 3/8 square drive shank. It allows the reamer to be used when a standard tap handle will not work.
More

HSS Straight Shank Machine...

$2.38
Banggood HSS Straight Shank Machine Reamer H7 Drill Bit 2/3/4/5/6/7/8/9/ 10mm
Free Shipping
/hss-straight-shank/vwtnb5QaA_xfnW5HTG6NXA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: HSS Straight Shank Machine Reamer H7 Drill Bit 2/3/4/5/6/7/8/9/1 0mm Specification: Material: HSS / High Speed Steel Shank Diameter: 2/3/4/5/6/7/8/9/1 0mm Length: 50mm-132mm Resolution: H7 Qunatity: 1pc Note: Please make sure the diameter before purchasing. Features: Sharp cutting-edge Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials. Durable and high quality. Widely used for bore machining. Package Included: 1x Machine Reamer More Details:
More

1 X Culinary Accessories -...

$7.93
Our Pampered Home 1 X Culinary Accessories - Lemon Reamer, Wood
Free Shipping
/1-x-culinary-accessories/NHvkiO6j4c4LoCd08Vgr7A==/info
Our Pampered Home
IN_STOCK ( In stock )
Store not rated
Free Shipping
Wood lemon reamer. Made in Taiwan.
More

Plunger Tube Reamer - Plunger...

$30.50
Brownells Plunger Tube Reamer - Plunger Tube Reamer Set
+ $7.95 shipping
/plunger-tube-reamer/jJ1vfHdpQaCjE_4j0IEYZw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Extra long reamers return the plunger tube to correct I.D. after staking - and provide plenty of spring clearance for positive operation. Mfg: Brownells SPECS: Tool steel reamers. Approximately 7-1/2 (17.7cm) long. Includes (1) .0925 (2.34mm) and (1) .108 (2.74mm) diameter reamer.
More

Baker Adjustable Reamer Size...

$32.99
MidwayUSA Baker Adjustable Reamer Size 3/A .406 to .437 Diameter for 410 Bore Choke Alterations
+ $4.99 shipping
/baker-adjustable-reamer/Nzm3YgAVheXTgaB0rgH35A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality.
More

HUOT 12000 Reamer Index, Steel

$24.51
Zoro HUOT 12000 Reamer Index, Steel
+ $5.00 shipping
/huot-12000-reamer-index/0iewsEAcs2X995Ce6As-2g==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Reamer Index, Holds A to Z, Steel, Overall Case Width (In.) 4, Overall Case Depth (In.) 821/64, Overall Case Height (In.) 13/16, Number of Compartments 26, Number of Drawers 1, Lock Included No, Tools Not Included
More

Baker Adjustable Reamer Size...

$32.99
MidwayUSA Baker Adjustable Reamer Size C .593 to .656 Diameter for 20 and 16 Gauge Choke Alterations
+ $4.99 shipping
/baker-adjustable-reamer/zxCZTdHn4kxZtURCXvnhEA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality.
More

Dave Reamers Floating Reamer...

$26.00
Brownells Dave Reamers Floating Reamer Holder - #3 Morse Taper Shank
+ $7.95 shipping
/dave-reamers-floating/L96y5_dsqpqW4sU8gb6p3Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Allows the reamer to remain parallel with the bore, while compensating for up to .030 of misalignment or wear between tailstock and chuck. Wide bearing surface, plus hardened and ground components give smooth movement with no cam-to-center lockup. Low mass, aluminum head lets the tool quickly respond to the slightest out of roundness. Hardened steel bushing eliminates wear in the reamer socket. Features interchangeable shanks; holder is reamed to accept shank with #2 Jacobs taper. Furnished with 1/2 diameter straight shank. Mfg: Manson Precision SPECS: Steel and aluminum. Holder - 1¾ (4.5cm) diameter, 2½ (6.4cm) long. Shanks - approx. 4 (10.2cm) long.
More

55232 Chucking Reamer, 1/2...

$58.97
Zoro 55232 Chucking Reamer, 1/2 In, 0.5 In
Free Shipping
/55232-chucking-reamer/MxGdrO7Edc4ETFmltYaYmQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 0.5000 In.,Size 1/2 In.,Number of Flutes 6,Flute Length 2 In.,Overall Length 8 In.,Bright Finish,Shank Type Straight,Shank Size 0.4375 In.,Chamfer 45 Degrees
More

Baker Adjustable Reamer Size...

$35.99
MidwayUSA Baker Adjustable Reamer Size E .718 to .781 Diameter for 12 and 10 Gauge Choke Alterations
+ $4.99 shipping
/baker-adjustable-reamer/gOrXnFaBCSfi_B5T-jVr5A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This high quality adjustable reamer is the perfect tool for opening up a shotgun's fixed choke constriction. By turning both of the adjusting nuts in the same direction, the reamer's diameter can be made larger or smaller. For best results, begin with the reamer set to a slightly larger diameter than the barrel's original constriction. Adjust the reamer a little bit at a time, removing material incrementally until the desired diameter has been achieved. In order to avoid damaging the barrel, work slowly, use cutting oil generously, and make sure that your tap handle is of good quality. Handle size measures .355.
More

HUOT 12125 Reamer Index, Steel

$24.48
Zoro HUOT 12125 Reamer Index, Steel
+ $5.00 shipping
/huot-12125-reamer-index/UMRYzOGhpBSD2h7WsBHzYA==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Reamer Index, Holds Dowel Pin Reamers .123 to .4995, Steel, Overall Case Width (In.) 4, Overall Case Depth (In.) 81/2, Overall Case Height (In.) 11/4, Number of Compartments 14, Number of Drawers 1, Lock Included No, Tools Not Included
More

Diamond Coated Bead Reamer...

$12.97
eBay Diamond Coated Bead Reamer Set With 5 Assorted Diamond Files
+ $3.24 shipping
/diamond-coated-bead/PXf5J1AAR3dOTr7D8kSvYQ==/info
eBay
IN_STOCK ( In stock )
Diamond Bead Reamer 5 pc Set • Set Includes:- 1pc Cone Tip: 1-3/4”- 1pc Cylinder with Cone Tip: 1- 3/4”- 1pc Tapered Tip: 2- 3/4”- 1pc Pointed Tip: 2”- 1pc Wood Handle with Metal Collet • Wood Handle Holds Tips up to 3mm Diameter • Used to File, Grind Shape Beads Made of Ceramics, Plastic,, Tile, Glass, Stone, Gold, Metals, Rock, Carbide, Wood Etc 5 Pc Assorted Mini Diamond Needle File Set 100 mm PVC Dipped Handles Assorted Shapes Approx. 4 Long PVC Dipped Handles Please take a l
More

Diamond Bead Reamer 5 Pc Set

$5.97
eBay Diamond Bead Reamer 5 Pc Set
+ $2.94 shipping
/diamond-bead-reamer-5-pc/Tt8N71Rp113_WqYFHEKCnQ==/info
eBay
IN_STOCK ( In stock )
Diamond Bead Reamer 5 pc Set • Set Includes: - 1pc Cone Tip: 1-3/4”- 1pc Cylinder with Cone Tip: 1- 3/4”- 1pc Tapered Tip: 2- 3/4”- 1pc Pointed Tip: 2”- 1pc Wood Handle with Metal Collet • Wood Handle Holds Tips up to 3mm Diameter • Used to File, Grind Shape Beads Made of Ceramics, Plastic,, Tile, Glass, Stone, Gold, Metals, Rock, Carbide, Wood Etc • Great for Jewelers, Hobby, Crafts, Modelers Etc Please take a look at my other items.More Hobby Craft Tools I will combine shippin
More

55216 Chucking Reamer, 1/4...

$42.99
Zoro 55216 Chucking Reamer, 1/4 In., Letter Size E
+ $5.00 shipping
/55216-chucking-reamer/XeIfNZpVSsmzBlGcdrSWyg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Chucking Reamer,Through Hole,Straight,Cutt ing Direction Right Hand,Carbide Tipped,Dimension Type Fractional Inch,Decimal Equivalent 0.2500 In.,Size 1/4 In.,Number of Flutes 4,Flute Length 11/2 In.,Overall Length 6 In.,Bright Finish,Shank Type Straight,Shank Size 0.2343 In.,Chamfer 45 Degrees
More

PTG Micrometer Adjustable...

$249.99
MidwayUSA PTG Micrometer Adjustable Reamer Stop
+ $4.99 shipping
/ptg-micrometer-adjustable/zgvLHp1Q2dWirkJNdm508w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This 8 piece kit makes chambering a barrel easier, and is for use by experienced gunsmiths and machinists only. Detailed instructions are included. Technical InformationNotes: 8-piece kit (5 different length bodies (ranging from .750-1.750), 2 collars (.375 and .625) and a micrometer dial) Each body has four laser-engraved marks that sit 90 degrees from each other for reference marks Each body fits standard .4375 reamer shank and are counter-bored .640 Each body is threaded 40tpi for .500 Micrometer dial has 25 even-spaced markings, with every 5th marking represented by a reference number Micrometer dial has approximately .250 adjustment with each body There are extensive and well written instructions for the use of this product This is intended for use by professional gunsmiths and... Less
More

Hinge Reamer Arm Pin, Ridgid,...

$4.16
Zoro Hinge Reamer Arm Pin, Ridgid, 47065
+ $5.00 shipping
/hinge-reamer-arm-pin/vF_i_VnkWFMe1kSATgYMDQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Hinge Reamer Arm Pin, For Use With Mfr. Model Number 15682, 15722, 41855, 67182, Fits Brand Ridgid
More

Lisle 2-11/16 to 5-5/16...

$54.99
National Tool Warehouse Lisle 2-11/16 to 5-5/16 Cylinder Ridge Reamer LIS36500
+ $9.95 shipping
/lisle-21116-to-5516/rUesUk99l3N622Mz1ZK7mQ==/info
National Tool Warehouse
IN_STOCK ( In stock )
Store not rated
Rollers assure easy turning in cylinder Exclusive stabilizer spring allows operator to take selective cut to minimize chatter Spring-loaded carbide cutter follows contour of cylinder Complete ridge removed in just a few easy turns Offset jaw guides assure rigidity throughout the range When replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time.
More

Lisle 36500 2-11/16 in. to...

$47.99
Tyler Tool Lisle 36500 2-11/16 in. to 5-5/16 in. Cylinder Ridge Reamer
+ $6.99 shipping
/lisle-36500-21116-in/9A2Gc39XkLUB3gVSz80kjw==/info
Tyler Tool
IN_STOCK ( In stock )
2-11/16 in. to 5-5/16 in. Cylinder Ridge Reamer - 36500. Rollers assure easy turning in cylinder. Exclusive stabilizer spring allows operator to take selective cut to minimize chatter. Spring-loaded carbide cutter follows contour of cylinder. Complete ridge removed in just a few easy turns. Offset jaw guides assure rigidity throughout the range. When replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time
More

Lisle 36500 2-11/16 in. to...

$52.99
CPO Outlets Lisle 36500 2-11/16 in. to 5-5/16 in. Cylinder Ridge Reamer
+ $6.99 shipping
/lisle-36500-21116-in/iAsBW39Zd2QMOnBmDsL6LQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
2-11/16 in. to 5-5/16 in. Cylinder Ridge Reamer - 36500. Rollers assure easy turning in cylinder. Exclusive stabilizer spring allows operator to take selective cut to minimize chatter. Spring-loaded carbide cutter follows contour of cylinder. Complete ridge removed in just a few easy turns. Offset jaw guides assure rigidity throughout the range. When replacing pistons or rings, or whenever you're rebuilding or overhauling an engine, always remove the ridge that forms at the top of the cylinder. The pistons and rings will suffer damage if the ridge is left in place when the engine starts up for the first time
More

Oemtools 25051 Lathe-type...

$44.75
eBay Oemtools 25051 Lathe-type Ridge Reamer
Free Shipping
/oemtools-25051-lathetype/wBOrARgAsbsPJXMbfWVVAg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
OEMTOOLS 25051 Lathe-Type Ridge Reamer The OEM Ridge Reamer has a range of 3-inch to 5-inch (76mm to 127mm). Reversible tungsten carbide cutter with fine pitch screw for smooth cutting action. Equally easy to use on conventional as well as slant-block engines. The lathe action follows the contours and imperfections of the worn cylinder to remove the entire ridge with one go. Stays sharp indefinitely and never needs adjusting. Comes with instructions and parts diagram. Designed for professional
More

Carr Tool Reamer Assembly...

$25.99
eBay Carr Tool Reamer Assembly Cm-1200-17
Free Shipping
/carr-tool-reamer-assembly/XdEapyPdFFsKIofbKgEQ_w==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Carr Tool Reamer Assembly CM-1200-17 *NEW* This listing is for (1) Carr Tool Reamer NEW. ShelfD7Bin198 Box12A 091251JB Sales tax MUST be charged with local pick up OR if item is shipped to an Indiana address, unless a proper tax exempt for is filed with our company. No exceptions.With International shipments, we
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335