Thermal Magnetic Circuit Breaker, Shunt Trip, Current Rating 100 Amps, Maximum Voltage 480 Volts, Number Of Poles 3, Air Rating 18k, Molded Case

The BM-1 is designed to monitor performance of 12 volt lead acid battery systems with capacities of up to 650 Amp hours. It is supplied complete with a precision 100 AMP shunt and a prefabricated cable assembly to enable simple DIY installation. The unit continuously monitors voltage, current (charge or discharge), number of amp/hours (charge or discharge), the batteries state of charge and the time to charge or discharge. This information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. Specifications: Supply voltage: 8-16 volts DC Supply current: 3 milliamps Battery capacities: 5-650 AMP Hour Load Current: 100 Amps Max Charge Current: 100 Amps Max Shunt: Standard 50 millivolt @ 100 AmpCables Supplied:100 Amp shunt link to M8 Ring... Less

Construction: Base Material: Reinforced Thermoplastic PolyesterFace Material: NylonTerminal Screws: #10 BronzeTerminal Clamp: 040" (10) Copper AlloyTerminals 040" (10) Copper AlloyGround Contact: 040" (10) Copper AlloyGround Shunt: 015" (3) Copper AlloyMounting Strap: 050" (13) Steel (Nickel-Plated)Sel f Ground Clip: Stainless SteelMounting Screw: Plated SteelBack Plate: 040" (10) Plated Copper AlloyTechnical Specs: Dielectric Voltage: Withstands 3500V per UL498Maximum working Voltage: 600V AC or 250V DCCurrent Interupting: Certified for current interrupting at full rated currentTemperatur e rise: Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL498Terminal Identification: (X, Y Z Brass Hot)... Less

Ideal for use with Blue Sea DC Ammeters, this current shunt is designed for continuous operation. Should not be run at more than 66% the rated current under normal conditions. Intermittent Duty: 100% @ 5 minutes, 300% @ 3 seconds Continuous Duty: 66% of rated current 50 Milivolts at full scale Shunt type: Resistive, manganin metal element

Variable Dc Speed Control, Output Voltage 90/180 Vdc, Shunt Wound Voltage 100/200 Vdc, Power Rating @ Lower Voltage 1/8-1 1/2 Hp, @ Higher Voltage 1/4-3 Hp, Input Voltage 120/240 Vac, Speed Range 50:1, Maximum Current 15.0 Amps, Chassis Mount, Adjustable Acceleration, Deceleration, Torque Limit, Current Limit, Minimum/maximum Speed, Ir Compensation, Voltage Follower 0-10 Vdc, Accepts Tach Feedback, Fuse Protected, Length 9.00 Inches, Depth 2.00 Inches, Width 6.70 Inches

Construction: Base Material: Reinforced Thermoplastic PolyesterFace Material: NylonTerminal Screws: #10 BronzeTerminal Clamp: 040" (10) Copper AlloyTerminals 040" (10) Copper AlloyGround Contact: 040" (10) Copper AlloyGround Shunt: 015" (3) Copper AlloyMounting Strap: 050" (13) Steel (Nickel-Plated)Sel f Ground Clip: Stainless SteelMounting Screw: Plated SteelBack Plate: 040" (10) Plated Copper AlloyTechnical Specs: Dielectric Voltage: Withstands 3500V per UL498Maximum working Voltage: 600V AC or 250V DCCurrent Interupting: Certified for current interrupting at full rated currentTemperatur e rise: Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL498Terminal Identification: (X, Y Z Brass Hot)... Less

Construction: Base Material: Reinforced Thermoplastic PolyesterFace Material: NylonTerminal Screws: #10 BronzeTerminal Clamp: 040" (10) Copper AlloyTerminals 040" (10) Copper AlloyGround Contact: 040" (10) Copper AlloyGround Shunt: 015" (3) Copper AlloyMounting Strap: 050" (13) Steel (Nickel-Plated)Sel f Ground Clip: Stainless SteelMounting Screw: Plated SteelBack Plate: 040" (10) Plated Copper AlloyTechnical Specs: Dielectric Voltage: Withstands 3500V per UL498Maximum working Voltage: 600V AC or 250V DCCurrent Interupting: Certified for current interrupting at full rated currentTemperatur e rise: Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL498Terminal Identification: (X, Y Z Brass Hot)... Less

Digital Panel Meter, Dc Current, Input Range 50/200mv Dc, Display Span 0-200 Adc, Display Digits 4 1/2, Display Red Lcd, Use With External 50 Or 200 Mvdc Shunt, Fits Standard 3/64 Din Cutout, Connector Type Screw Terminal, Power Required 85-250vac, Depth 2.36 In, Mounting Unique, Allows Stacking Of Multiple Meters, Style Mini-max, Includes Instructions

Construction: Base Material: Reinforced Thermoplastic PolyesterFace Material: NylonTerminal Screws: #10 BronzeTerminal Clamp: 040" (10) Copper AlloyTerminals 040" (10) Copper AlloyGround Contact: 040" (10) Copper AlloyGround Shunt: 015" (3) Copper AlloyMounting Strap: 050" (13) Steel (Nickel-Plated)Sel f Ground Clip: Stainless SteelMounting Screw: Plated SteelBack Plate: 040" (10) Plated Copper AlloyTechnical Specs: Dielectric Voltage: Withstands 3500V per UL498Maximum working Voltage: 600V AC or 250V DCCurrent Interupting: Certified for current interrupting at full rated currentTemperatur e rise: Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL498Terminal Identification: (X, Y Z Brass Hot)... Less