Category

Tools and Accessories
Showing results for "craftsman 10 in. table saw model 21805"
Results 1 - 40 of 1500+

Craftsman 10 Table Saw with...

$284.58
Sears Craftsman 10 Table Saw with Laser Trac (21807) 5/8 in.
Free Shipping
/craftsman-10-table-saw/4iqG9e2Ih7thfOM90mXaNg==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Craftsman 21807 Table Saw: Precision, Speed and a Clean Cut with Every Pass Ripping sheets of plywood, slotting boards and building perfect boxes, a solid table saw is the center of any shop and strong support for countless projects, which is why the Craftsman 21807 is loaded with features. Line up every cut with the Laser Trac guidance system and use the smooth gliding t-slot miter gauge and 10 inch carbide tipped blade to slice perfect angles. No matter what kind of work you ve got ahead, this table saw is ready to lend a hand. Perfect for long work pieces, the Craftsman 21807 Table Saw features an extendable out-feed support that gives you more control so you can focus on smooth feeding. And if you ve got a wide cut to make, the extendable support tables and quick moving fence allow... Less
More

Bosch 1.5mm steel Table Saw...

Free Shipping
8 stores Bosch 1.5mm steel Table Saw Stand (TS2000)
Bosch TS2000 Gravity-Rise(TM) Wheeled Table Saw Stand The Bosch TS2000 table saw stand is easy to...
More

Bosch 4100-09 Table Saws

Free Shipping
2 stores Bosch 4100-09 Table Saws
10-in Worksite Table Saw - 4100. 10-in 40-Tooth Carbide Tip Saw Blade. Sliding Miter Gauge. Hex...
More

Craftsman 10 Single Bevel...

$199.99
Sears Craftsman 10 Single Bevel Sliding Compound Miter Saw (21237) 5/8 in.
Free Shipping
/craftsman-10-single-bevel/aqH7TnJTq3LEuQUxg57kzw==/info
Sears
IN_STOCK ( In stock )
Free Shipping
A Craftsman 10' Sliding Compound Miter Saw Gets the Job Done Precisely RightSmooth cutting with laser guided precision, lightweight, portable and slicing seamlessly through thick materials, the Craftsman 10' single bevel sliding compound miter saw is the perfect addition to a job site and home shop alike. Spinning at 4,800 revolutions per minute, no matter which blade you slip onto the collar of this compound, you'll cut through wood both hard and soft, leaving sharp edges and tight corners with every cut. The perfect way to save money on any job, the Craftsman 10' sliding compound miter saw uses smaller, easy-to-maintain blades than larger models, but this saw still delivers the reach to spin through boards up to 12 inches wide. Perfect for quick work, this saw features a Laser Trac that... Less
More

Makita 10 in. Portable...

$799.99
CPO Makita Makita 10 in. Portable Contractor Table Saw with Table Saw Stand 2705X1
Free Shipping
/makita-10-in-portable/eb95ka5AMg2Z5rXeKu1dsQ==/info
CPO Makita
IN_STOCK ( In stock )
Store not rated
Free Shipping
10 in. Contractor Table Saw w/ Table Saw Stand - 2705X1. Carbide Tipped Blade - A-94459. Tool-less Blade Guard System. Rip Fence - 122740-1. Angled Miter Gauge - 122735-4. Wrench *5 - 783203-8. Wrench *19 - 781038-1. Socket Wrench *13-22 - 782024-5. Portable Table Saw Stand - 194093-8. Right extension table allows for greater cutting capacity with the capability to rip 4X8 sheets of plywood. Two pole slide system for raising and lowering blade for the most efficient and smoothest adjustment of the blade depth. Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy. Large cutting capacity (3-5/8 in. at 90 degrees and 2-1/2 in. at 45 degrees) can rip 4x material in one pass, can use up to a 13/16 in. dado blade. Large on and off switch and easy to... Less
More

Craftsman 50 cc 20 Gas Chain...

$189.98
Sears Craftsman 50 cc 20 Gas Chain Saw - Case Included
Free Shipping
/craftsman-50-cc-20-gas/1WxO-QhsoIltz-EMnsYT-A==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Choose This 20 Gas Chain Saw for a Comfortable Sawing ExperienceStylish ly designed, this Craftsman 20 Gas Chain Saw is a cut above the rest in its class. Powered by a powerful 50cc, two-cycle engine, this chain saw can take on any sawing job. The reduced vibration design minimizes user fatigue and enables you to comfortably work. Featuring a convenient in-handle storage, you can easily access your scrench whenever you need it.Designed for optimum operator control, this 20 Gas Chain Saw features a wraparound handle to give you a good grip. It also helps you easily alternate between horizontal and sideways grips while working. Security mechanisms like a safety kill switch with a safety lock and a reduced kickback bar and chain make it user-friendly and easy to operate. The automatic chain... Less
More

Oliver 9510 10' Table Saw

$12,421.50
Elite Metal Tools Oliver 9510 10' Table Saw
Free Shipping
/oliver-9510-10-table-saw/wdXuZDVXoh51imBz6ELmWQ==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
• Powerful 7.5HP, 3Ph Motor• Manufactured with State of the Art CNC Machining Centers EnsurePrecision Components and Perfect Fit• The Aluminum Alloy Multi-Chamber Carriage is Machine and Importedfrom Europe with Strict Attention Paid to the Anodizing and HardeningProcesse s• High Tensile, Heat Treated Steel Guide Rods are Chrome Plated toEnsure Perfect Lifetime Cutting Accuracy• Both the Blade Height and Tilt Adjustments are Conveniently Located• LED Displays for Both Tilt Angle and Blade Speed• Simple and Accurate Scoring Blade Adjustment• Overhead Saw Guard
More

Skil 10 in. Benchtop Table...

$249.99
Skil Shop Skil 10 in. Benchtop Table Saw 3410-02
Free Shipping
/skil-10-in-benchtop/uWnlh1ZDfew9xvfxhh4E2Q==/info
Skil Shop
IN_STOCK ( In stock )
Store not rated
Free Shipping
120V 10 in. Table Saw - 3410-02. Heavy-Duty Folding Stand. Carbide-Tooth Blade. (2) Blade Wrenches. Self Aligning Rip Fence. Miter Gauge. Heavy-duty folding stand for fast setup and easy transport. 3-1/2 in. cut height capacity cuts through 4x materials. Self-aligning rip fence for accurate measurements. Miter gauge guides work pieces when making cross cuts. EZ View measurement system for accurate settings. On-tool storage for all accessories and guarding system
More

JET B3NCH 10 in. Jobsite...

$669.99
CPO Jet JET B3NCH 10 in. Jobsite Table Saw with Stand 707000
Free Shipping
/jet-b3nch-10-in-jobsite/rG8TeX5RZqXexZFjwBa3Sg==/info
CPO Jet
IN_STOCK ( In stock )
Store not rated
Free Shipping
B3NCH, JBTS-10MJS, 10 in. Jobsite Table Saw with Stand - 707000. Easy folding stand for convenient storage, quick setup and portability on the jobsite. Rubber hand grips on each end of the table allow you to conveniently carry without stand. Heavy-Duty 15 Amp motor with soft start. Aluminum extruded rails ensure a square fence and sliding precision. Large telescoping extension wing provides a wide 25 in. ripping capacity. Unique dust shroud design enhances dust and chip removal. Rear extension provides outfeed support and keeps the workpiece flat. New riving knife system complies with UL standards and prevents kickback. Sheet metal outfeed table with height adjustment supports long workpieces
More

DeWALT Dewalt 10'' Jobsite...

$579.00
Max Tool DeWALT Dewalt 10'' Jobsite Table Saw w/ 32-1/2'' Rip Capacity & Rolling Stand - DWE7491RS
Free Shipping
/dewalt-dewalt-10/OiknDK_MWGO1hj0gi4u2HA==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
10 Jobsite Table Saw 32 - 1/2 (82.5cm) Rip Capacity, and a Rolling Stand easily cuts a variety of larger shelving and trim materials Dewalt 10'' Jobsite 15 Amps 4,800 rpm Table Saw w/ 32-1/2'' Rip Capacity & Rolling Stand
More

Evolv 15 Amp 10 in. Table Saw...

$151.98
Sears Evolv 15 Amp 10 in. Table Saw 28461 5/8 in.
Free Shipping
/evolv-15-amp-10-in-table/5WdagI3Hf9RXWxPcC2ZGLQ==/info
Sears
IN_STOCK ( In stock )
Free Shipping
10 Inch Table Saw: Make Every Cut Straight and True With , balance and accuracy, this 10 Inch Table Saw delivers smooth cuts for perfect miters, mortises and tight fitting dado's that will slip together tight and stay in one piece for decades. Built from rugged steel, this table saw is designed for years of heavy use, from home renovation, to yard projects to building the perfect tree house. Versatile, durable and packing enough power to slice through the toughest timber, this saw will be a workshop fixture for decades. Easy to maneuver and ultra stable, the 10 Inch Table Saw s rip fence gives you solid backing whether you re feeding planks, boards or full sheets of ply, and equipped with an adjustable anti-kickback pawl, every pass will be stable, true and safe. A solid start to a... Less
More

Woodstock W1811 Shop Fox® 10...

$3,330.40
Elite Metal Tools Woodstock W1811 Shop Fox® 10 Sliding Table Saw - 5HP Single Phase
Free Shipping
/woodstock-w1811-shop-fox/VJyRsmrCiP_UutztlYVrWQ==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
Made for cutting wide panels with ease and accuracy, this 10 Sliding Table Saw features a scoring blade to eliminate cross grain tear-out, a 63 long crosscut capacity, fully adjustable miter fence with two swing stops, adjustable extruded fence, adjustable riving knife and large blade guard with integral dust port. This 10 Sliding Table Saw makes quick work of all standard plywood panels. Accepts 10 saw blades with 5/8 arbor bores. CSA certified meeting CSA C22.2 #105-1953 standards! Specifications: Motor: 5 HP, 230V, single-phase, TEFC, 3450 RPM, 19ABlade tilt: 0° - 45°Table size without extension wings: 27L x 14-3/8WTable size with extension wings: 47L x 40WSliding table size: 63L x 12-1/4WMain blade arbor speed: 4000 RPMMain blade diameter: 10Main blade arbor diameter: 5/8Scoring blade... Less
More

Bosch 10 in. Portable Jobsite...

$349.00
Skil Shop Bosch 10 in. Portable Jobsite Table Saw GTS1031
Free Shipping
/bosch-10-in-portable/wnZVA728VpYYPIBEHdH4MA==/info
Skil Shop
IN_STOCK ( In stock )
Store not rated
Free Shipping
10 in. Portable Jobsite Table Saw - GTS1031. 24T Blade. Rip Fence. Smart Guard. Miter Gauge. Blade Wrenches. L-Wrench. 4.0 HP, 5,000 RPM motor is powerful and long-lasting for smooth effortless cuts. Ergonomic one-handed carry handle for ultimate portability. Stacks on side for easier transport and storage. Protective under tool storage for rip fence, Smart Guard, miter gauge and wrenches. Durable all steel base design is lightweight and can handle jobsite abuse. Squarelock rip fence, self-aligning design for accurate performance. 18 in. rip capacity, 1/2 in. dado, and expanding table top for a broad range of applications. Smart Guard modular blade guard system that is easy to install/remove and does not interfere with work. Tool-free dust chute clear-out
More

Craftsman 26 in. 4-Drawer...

$149.99
Sears Craftsman 26 in. 4-Drawer Standard Duty Ball Bearing Rolling Cabinet - Black 4 x 2 in.
Free Shipping
/craftsman-26-in-4drawer/719VEf2AqszvmysX7mbKYQ==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Make Your Workspace Work for You with the Craftsman 4-Drawer Rolling Cabinet You ll love this rollaway chest for its functionality, ease and great price. The Craftsman tool storage rolling cabinet gives you more options for mobility and storage so you can easily move your tools when and where you need them and store them neatly away when you re done. With a variety of drawer sizes to sort and store parts, hand or power tools and everything in between, it keeps you on top of your projects so you ll never need to scramble through clutter looking for your things or waste money buying misplaced parts again. The chest s ball bearing drawers glide open and close with smooth operation giving you quick and easy access your tools, while its external locking system keeps them secure so your tools... Less
More

Craftsman C3 3/8-in. Impact...

$129.98
Sears Craftsman C3 3/8-in. Impact Wrench 3/8 in.
Free Shipping
/craftsman-c3-38in/5K2kKwD8cJgW2L5wveun_A==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Craftsman's 3/8 Impact Wrench Lets You Tackle Big Jobs Whether you're a seasoned builder or an around-the-house handyman, you'll find the Craftsman CM C3 3/8 Impact Wrench is one of the most valuable and versatile sets of equipment you'll ever own. Why? Because it's crafted with both the mechanic and the homeowner in mind, meaning that it's a jack-of-all-trades set that gives you 0-2500 RPM no load speeds to tighten and loosen all your nuts and bolts and get your job done swiftly and easily. Packed with power, Craftsman's 3/8 Impact Wrench is backed by the quality of the Craftsman name so you know you'll be able to trust that it's going to withstand whatever job you tackle. Powered by a 19.2-volt DieHard battery, this wrench is compact and lightweight with an overmold mid-handle design... Less
More

Bosch 10 in. Portable Jobsite...

$349.00
CPO Bosch Bosch 10 in. Portable Jobsite Table Saw GTS1031
Free Shipping
/bosch-10-in-portable/eWYExAvlj_JlX1ptqIKzQA==/info
CPO Bosch
IN_STOCK ( In stock )
Free Shipping
10 in. Portable Jobsite Table Saw - GTS1031. 24T Blade. Rip Fence. Smart Guard. Miter Gauge. Blade Wrenches. L-Wrench. 4.0 HP, 5,000 RPM motor is powerful and long-lasting for smooth effortless cuts. Ergonomic one-handed carry handle for ultimate portability. Stacks on side for easier transport and storage. Protective under tool storage for rip fence, Smart Guard, miter gauge and wrenches. Durable all steel base design is lightweight and can handle jobsite abuse. Squarelock rip fence, self-aligning design for accurate performance. 18 in. rip capacity, 1/2 in. dado, and expanding table top for a broad range of applications. Smart Guard modular blade guard system that is easy to install/remove and does not interfere with work. Tool-free dust chute clear-out
More

SHOP FOX W1824 2 H.P. 10...

$1,196.00
Max Tool SHOP FOX W1824 2 H.P. 10 Hybrid Cabinet Table Saw with Extension Table - W1824
Free Shipping
/shop-fox-w1824-2-hp-10/BYCc1DZr2UUHATzpjsH36Q==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
2 H.P. 10 Hybrid Cabinet Table Saw with Extension Table SHOP FOX W1824 2 H.P. 10 Hybrid Cabinet Table Saw with Extension Table
More

Craftsman 32 in. Spread Width...

$179.99
Sears Craftsman 32 in. Spread Width Aerator/Spreader Combo, 100 lb. Capacity 10 x 1.75 in.
+ $19.95 shipping
/craftsman-32-in-spread/6WWQv6ygMDDdF6ix-oU0SA==/info
Sears
IN_STOCK ( In stock )
The Craftsman Aerator Spreader Offers Two-in-One VersatilityProvid ing two jobs at once, the Craftsman 32 in aerator spreader combo 100 lb. capacity will not only aerate your soil, but will also fertilize your lawn at the same time. The heavy-duty aerator punctures the soil to prevent run-off of fertilizers, and it helps herbicides to get directly into the worked soil. The aerator/spreader has 96 heavy-duty steel tine tips that penetrate soil up to two inches for tough, dependable operation. The 100% rustproof polypropylene hopper delivers long-lasting, all-weather durability and a large, 100 lb. capacity for getting the job done in less time.Spread fertilizer, weed killers, ice melt or sand in half the time with the Craftsman aerator spreader. A convenient lift lever raises it and lowers... Less
More

Baileigh STS-14120 Sliding...

$11,845.00
Elite Metal Tools Baileigh STS-14120 Sliding Table Saw
Free Shipping
/baileigh-sts14120/1dl_iAe2_ZDCTrt383mI8A==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
When Baileigh Industrial does something we do it right, the STS-14120 is no exception.  This class leading sliding table saw has all the features the most discerning shop could want.  The STS-14120 comes standard with a 12” blade but will take a 14” blade without modification and turns on a 1” arbor.  The 7.5 hp 220 volt three phase motor has three speeds in which it will cut, by moving the belts.  The rpm range is between 3000 and 5000 rpm with a digital readout.  A 1 hp scoring blade is also standard and spins at 8000 rpm to ensure a crisp, clean cut.The STS-14120 has a 15’ x 125” sliding table.  The fully extruded table slides on four precision shafts for the greatest accuracy possible.  The blade tilting uses a manual hand wheel system with digital readout for telling the degrees. ... Less
More

Makita 10'' 15A 4,800 Rpm...

$829.99
Max Tool Makita 10'' 15A 4,800 Rpm Table Saw w/ Folding Wheeled Stand - 2705X1
Free Shipping
/makita-10-15a-4800-rpm/X95_aeEwWpz_cxHfNU3Qrg==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
The Makita 2705X1 Features: Blade guard assembly with cam lock provides easy tool-less installation or removal Makita 10'' 15 Amp 4,800 RPM Table Saw with Stand
More

Baileigh STS-14120-CNC Table...

$23,987.00
Elite Metal Tools Baileigh STS-14120-CNC Table Saw
Free Shipping
/baileigh-sts14120cnc/rNsJJRf7poeWtNK1W_wpbw==/info
Elite Metal Tools
IN_STOCK ( In stock )
Store not rated
Free Shipping
The STS-14120-CNC table saw from Baileigh Industrial is based from our other sliding table saw designs, but adds a CNC twist.  The CNC function really helps with accuracy and efficiency of any project.  The 5.7” CNC touchscreen control has a 300 profile memory capacity.  It controls the cutting width, blade tilting, and main saw blade height. The scoring blade height is also motorized.This class leading sliding table saw has all the features the most discerning shop could want.  The STS-14120-CNC comes standard with a 12” blade but will take a 14” blade without modification and turns on a 1” arbor.  The 7.5 hp 220 volt three phase motor has four speeds in which it will cut, by moving the belts.  The rpm range is between 3000 and 6000 rpm with a digital readout.  A 1 hp scoring blade is... Less
More

Craftsman C3 3/8-In Impact...

$89.99
Sears Craftsman C3 3/8-In Impact Wrench Add-On Tool 3/8 in.
Free Shipping
/craftsman-c3-38in/2Tj6ZA_aLXr49FVJ7zZxOw==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Count on this Craftsman Impact Wrench Tool to Sink it Right A muscly addition to your C3 system, this Craftsman C3 3/8 in impact wrench tool delivers 130 foot pounds of torque at up to 3,500 impacts per minutes to get the toughest fasteners turning. Whether you re swapping tires on the side of the road, or torquing your way through a complete engine overhaul, this tool gives solid performance in a flexible, cordless package. Built to get into tight areas, it s compact in design and features a low mounted LED light that illuminates every nut and bolt within reach. Part of the C3 system, this Craftsman impact wrench tool shares batteries with drills, drivers, saws, lights and more, while providing much needed muscle to countless jobs. Built tough, it stands up to the rigors of garage and... Less
More

Skil 15-Amp 10-in Table Saw...

$149.00
Lowe's Skil 15-Amp 10-in Table Saw 3310-01
+ $13.99 shipping
/skil-15amp-10in-table/guLpLnU260890J73fmVQHA==/info
Lowe's
IN_STOCK ( In stock )
Includes saw fixed stand 10-in blade miter gauge and push stick. 15-amp motor generates up to 5000-RPM to rip and crosscut with ease. 10-in carbide-tipped blade is durable.
More

SHOP FOX W1819 10 3 H.P...

$1,800.00
Max Tool SHOP FOX W1819 10 3 H.P. Cabinet Table Saw with Riving knife - W1819
Free Shipping
/shop-fox-w1819-10-3-hp/Vw_zOEegsoCNfdc-yPCMmQ==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
10 3 H.P. Cabinet Table Saw with Riving knife SHOP FOX W1819 10 3 H.P. Cabinet Table Saw with Riving knife
More

Makita 10 in. Portable...

$869.99
Tyler Tool Makita 10 in. Portable Contractor Table Saw with Table Saw Stand 2705X1
Free Shipping
/makita-10-in-portable/HKw6Xc_wcjMue3vcH93ebg==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
10 in. Contractor Table Saw w/ Table Saw Stand - 2705X1. Carbide Tipped Blade - A-94459. Tool-less Blade Guard System. Rip Fence - 122740-1. Angled Miter Gauge - 122735-4. Wrench *5 - 783203-8. Wrench *19 - 781038-1. Socket Wrench *13-22 - 782024-5. Portable Table Saw Stand - 194093-8. Right extension table allows for greater cutting capacity with the capability to rip 4X8 sheets of plywood. Two pole slide system for raising and lowering blade for the most efficient and smoothest adjustment of the blade depth. Aluminum die cast, precision machined table top remains flat and true for out of the box accuracy. Large cutting capacity (3-5/8 in. at 90 degrees and 2-1/2 in. at 45 degrees) can rip 4x material in one pass, can use up to a 13/16 in. dado blade. Large on and off switch and easy to... Less
More

Craftsman 48 Steel Black...

$299.99
Sears Craftsman 48 Steel Black Storage Chest
Free Shipping
/craftsman-48-steel-black/3dOdBmujokofRKHcCjP12g==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The Craftsman 48 Steel Black Storage Chest[ provide secure storage for truck owners or on the jobsite storage needs. Often found in back of pickups as it fits between wheel wells.
More

Table Saws: Genesis Saws -...

$179.99
Home Depot Table Saws: Genesis Saws - Table 10 in. Table Saw with Stand GTS10SB
Free Shipping
/table-saws-genesis-saws/eIPICae8s-Db4SLffFy9Lg==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. The Genesis GTS10SB 10 in. Table Saw is a powerful, durable and portable machine for all your wood cutting needs. Make rip cuts, crosscuts, miter cuts, bevel cuts and compound cuts in plywood, flooring, molding or dimensional lumber. A heavy duty 15 amp motor drives the blade at 4800 RPM for fast, smooth cutting. The easy-to-use height and bevel controls, sliding miter gauge, and self-aligning rip fence all make it easy to get an accurate cut. An oversized 20 in. x 24 in. die cast aluminum table can accept an optional extension table that expands your rip capacity from 9-1/2 in. to 24 in. Your Genesis 10 in. Table Saw comes complete with a 40T carbide blade installed and a heavy duty metal stand.
More

Craftsman Test Instrument Kit

$99.99
Sears Craftsman Test Instrument Kit
Free Shipping
/craftsman-test-instrument/VLhNt-jtozyeR1VEBMsd2w==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Expert Measures with the Craftsman Test Kit Test for voltage, current, resistance, capacitance, frequency and more with the Craftsman test instrument kit. Kit includes a multimeter, ammeter, infrared thermometer and a voltage detector along with a handy case to keep everything together. Go with the quality you trust in Craftsman when it comes to electrical work. The non-contact laser-directed infrared thermometer can even measure a one-inch spot from eight inches away! . Your four test instruments come with a clamp adapter for high-current AC measurements. When your work is finished, simply secure your test instruments in the included storage case.
More

DELTA 13-Amp 10-in Table Saw...

$549.00
Lowe's DELTA 13-Amp 10-in Table Saw 36-725
+ $79.00 shipping
/delta-13amp-10in-table/IcHK5WkcRqHc2sUCHbzGzw==/info
Lowe's
IN_STOCK ( In stock )
Includes saw rolling stand 10-in blade and locking rip fence. 13-amp enclosed induction motor generates 3600-RPM to rip thick stock or challenging dados. 10-in carbide-tipped blade is durable and the built-in arbor lock allows for quick and easy blade changes.
More

Craftsman® Industrial™...

$17.75
Global Industrial Craftsman® Industrial™ 9-23847 10 Flex T Handle 3/8 Drive
No Shipping Info
/craftsman-industrial/2nfn4gdmIgAijlt329F1Mw==/info
Global Industrial
IN_STOCK ( In stock )
Craftsman 10 Flex T Handle 3/8 Drive Features: T HandleDrive Size: (In.) 3/8Overall Length (In.): 11-1/2247-Chrome FinishLimited Lifetime Warranty 11.50 L. 3.00 W. 1.50 H.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355