copper fittings

Flange, Pipe Size 3 In.Nominal Size 3 In., Outside Dia. 3-1/8 In., Connection C x C, Material of Construction Cast Copper, Temp. Range 0 to 400 Degrees F, Max. Pressure 95 psi @ 100 Degrees F, Standards ANSI B16.18

Flange, Pipe Size 2 1/2 In.Nominal Size 2-1/2 In., Outside Dia. 2-5/8 In., Connection C x C, Material of Construction Cast Copper, Temp. Range 0 to 400 Degrees F, Max. Pressure 100 psi @ 100 Degrees F, Standards ANSI B16.18

You are bidding on a large lot of copper fittings. All of these fittings are unused. There are 2 1, 41 3/4, 98 1/2 fittings, one copper connecter and some nails and brackets. Some of them may be discolored, but they are all unsed. These fittings total

Here is a lot of 2 copper fittings all are new there is two 2 copper ells four 2 copper couplings one 2 copper by male adt one 2 copper street 45 one 2: copper union one 2 copper cap and one 2 x 11/4 reducing coupling I have over 10.000 plumbing

TeeNominal Size 3/4 In., Outside Dia. 7/8 x 7/8 x 3/4 In., Connection C x C x F, Material of Construction Cast Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 582 psi @ 100 Degrees F, Standards ANSI B16.18

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

Cello Products Inc. is the premier copper solder fittings manufacturer in North America and is one of the only cast brass fittings producers. These products are used in plumbing, heating and related mechanical applications. Cello produces fittings ranging in use from underground water and gas services to water distribution and air conditioning systems as well as drainage, waste and vent piping for use in residential, commercial, industrial and institutional applications.

Reducing Tee, Pipe Size 3/4 x 3/4 x 1/2 In.Nominal Size 3/4 x 3/4 x 1/2 In., Outside Dia. 7/8 x 7/8 x 1/2 In., Connection C x C x F, Material of Construction Cast Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 582 psi @ 100 Degrees F, Standards ANSI B16.18

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

Up for sale--22 assorted 11/2 inch,copper fittings, includes: 3- 11/2tee 7- 11/290 elbow 3-11/2 90 street elbow 5-11/2 45 elbow 2-11/2 male adapter 2-11/2 female adapter I've closed my shop and selling my inventory. These are all new,unused fittings. Some fittings have tarnished,some have not,some are in boxes,some are not.I'm packing as many fittings,as I can into medium flat rate USPS boxes.Look for other sizes in my store, all at 1/2 price or less. A nice assortment for the service plum

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

GE SmartWater Compatible Inline Filter Kit w/fittings - GXRTQ-6PK RC-GXRTQ-6PK. GE GXRTQ-6PK SmartWater Compatible Inline Refrigerator Filter Features: The GE SmartWater Inline Refrigerator Filter Kit GXRTQ and the replacement cartridge GXRTQR have been discontinued. Fittings available for plastic or copper tubing. Be sure to select the appropriate fittings.The GE GXRTQ-6PK Inline Refrigerator Filter has been discontinued. This compatible kit offers the same level of filtration and the same style of quick coupling fittings.This kit is available with fittings that will work with copper tubing or with plastic tubing. You will need to make sure you select the correct option for your application. Convenient 6 pack Reduces chlorine taste & odor Reduces rust & sediment NSF 42 Certified Replace... Less

8 Loop 1 Type L Copper Header Manifold with 1/2 male copper fittings. These are most often used for radiant floor heat applications. These come pressure tested to insure trouble free installation. This listing is for one header. Check out our store where we also have manifolds with 1/2 pex crimp fittings and 1/2 pex crimp mini-ball valves.

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

Flange, Pipe Size 2 In.Nominal Size 2 In., Outside Dia. 2-1/8 In., Connection C x C, Material of Construction Cast Copper, Temp. Range 0 to 400 Degrees F, Max. Pressure 100 psi @ 100 Degrees F, Standards ANSI B16.18

Viega ProPressG fittings are built to last, composed of copper that is heavier than Type K pipe. A Viega ProPressG connection provides a strong, durable seal that will last the life of the piping system when installed properly. Viega ProPressG has a yellow HNBR sealing element which clearly differentiates Viega gas fittings from the standard Viega ProPress fittings. Exceeds the most rigorous testing codes and standards in North America.

Flange, Pipe Size 1 In.Nominal Size 1 In., Outside Dia. 1-1/8 In., Connection C x C, Material of Construction Cast Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 105 psi @ 100 Degrees F, Standards ANSI B16.18

Viega ProPressG fittings are built to last, composed of copper that is heavier than Type K pipe. A Viega ProPressG connection provides a strong, durable seal that will last the life of the piping system when installed properly. Viega ProPressG has a yellow HNBR sealing element which clearly differentiates Viega gas fittings from the standard Viega ProPress fittings. Exceeds the most rigorous testing codes and standards in North America.

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

Copper Tube | Type: Water (l) | Outside Diameter: 3/4 (inch)

GE SmartWater Compatible Inline Filter Kit w/fittings - GXRTQ-3PK. GE GXRTQ-3PK SmartWater Compatible Inline Refrigerator Filter Features: The GE SmartWater Inline Refrigerator Filter Kit GXRTQ and the replacement cartridge GXRTQR have been discontinued. Fittings available for plastic or copper tubing. Be sure to select the appropriate fittings.The GE GXRTQ-3PK Inline Refrigerator Filter has been discontinued. This compatible kit offers the same level of filtration and the same style of quick coupling fittings.This kit is available with fittings that will work with copper tubing or with plastic tubing. You will need to make sure you select the correct option for your application. Convenient 3 pack Reduces chlorine taste & odor Reduces rust & sediment NSF 42 Certified Replace every 12... Less

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

Viega ProPressG fittings are built to last, composed of copper that is heavier than Type K pipe. A Viega ProPressG connection provides a strong, durable seal that will last the life of the piping system when installed properly. Viega ProPressG has a yellow HNBR sealing element which clearly differentiates Viega gas fittings from the standard Viega ProPress fittings. Exceeds the most rigorous testing codes and standards in North America.

Viega ProPressG fittings are built to last, composed of copper that is heavier than Type K pipe. A Viega ProPressG connection provides a strong, durable seal that will last the life of the piping system when installed properly. Viega ProPressG has a yellow HNBR sealing element which clearly differentiates Viega gas fittings from the standard Viega ProPress fittings. Exceeds the most rigorous testing codes and standards in North America.

Union, Pipe Size 1 In.Nominal Size 1 In., Outside Dia. 1-1/8 In., Connection C x C, Material of Construction Cast Copper, Temp. Range -20 to 400 Degrees F, Max. Pressure 494 psi @ 100 Degrees F, Standards ANSI B16.18

The ApolloXpress small diameter fittings feature copper-body construction for most configurations. The lead-free design offers a Leak Before Press feature. The forward lip aids in the alignment of the copper tube during insertion, reducing the risk of o-ring damage. These fittings are approved for underground applications and are ideal for service and repair. Pre-lubricated, they are fast and simple to install. Copper fittings are Made in the USA.

Viega ProPressG fittings are built to last, composed of copper that is heavier than Type K pipe. A Viega ProPressG connection provides a strong, durable seal that will last the life of the piping system when installed properly. Viega ProPressG has a yellow HNBR sealing element which clearly differentiates Viega gas fittings from the standard Viega ProPress fittings. Exceeds the most rigorous testing codes and standards in North America.

3 Loop 1 Type L Copper Header Manifold with 1/2 male copper fittings. These are most often used for radiant floor heat applications. These come pressure tested to insure trouble free installation. This listing is for one header. Check out our store where we also have manifolds with 1/2 pex crimp fittings and 1/2 pex crimp mini-ball valves.