Other Pipes / Joints

The NIBCO 4803-2 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a spigot connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a male spigot connection on one end for fitting into a female unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits... Less

The NIBCO 4803-2 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a spigot connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a male spigot connection on one end for fitting into a female unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits... Less

The NIBCO 435 schedule 40 adapter pipe fitting is made of PVC and has a slip connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female slip opening on one end for sliding over a male unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution... Less

The NIBCO 435 schedule 40 adapter pipe fitting is made of PVC and has a slip connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female slip opening on one end for sliding over a male unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution... Less

The NIBCO 4804 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a hub connection and a male National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end for connecting to a male unthreaded pipe and male NPT threads on the other for connecting to a female threaded pipe. The hub end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal... Less

The NIBCO 4803-2 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a spigot connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a male spigot connection on one end for fitting into a female unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits... Less

The NIBCO 4801-2-7 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a spigot connection and a slip-joint connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a male spigot connection on one end and a slip joint opening on the other for connecting to unthreaded pipes or fittings. Tightening the slip nut against the slip joint washer creates a compression seal against leaks and loosening the slip nut allows disassembly of the joined parts. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal. PVC can be connected... Less

The NIBCO 4803-2 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a spigot connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a male spigot connection on one end for fitting into a female unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the spigot end has the same diameter as the pipe it connects to, minimizing turbulence and creating a tight seal. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits... Less

The NIBCO 4801-7 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a hub connection and a slip-joint connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end and a slip joint opening on the other for connecting to unthreaded pipes. Tightening the slip nut against the slip joint washer creates a compression seal against leaks and loosening the slip nut allows disassembly of the joined parts. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal. PVC can be connected to other materials... Less

The NIBCO 4803 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a hub connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end for connecting to a male unthreaded pipe and female NPT threads on the other for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the hub end connects to pipes with a smooth bore for enhanced flow. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal... Less

The NIBCO 436 schedule 40 adapter pipe fitting is made of PVC and has a slip connection and a male National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female slip opening on one end for sliding over a male unthreaded pipe and male NPT threads on the other end for connecting to a female threaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution... Less

The NIBCO 436 schedule 40 adapter pipe fitting is made of PVC and has a slip connection and a male National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female slip opening on one end for sliding over a male unthreaded pipe and male NPT threads on the other end for connecting to a female threaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution... Less

The NIBCO 5801-7 schedule 40 adapter pipe fitting is made of acrylonitrile butadiene styrene (ABS) for use in drain, waste, and vent systems (DWV) and has a hub connection and a slip-joint connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end and a slip joint opening on the other for connecting to unthreaded pipes. Tightening the slip nut against the slip joint washer creates a compression seal against leaks and loosening the slip nut allows disassembly of the joined parts. This schedule 40 (standard wall) fitting is made of acrylonitrile butadiene styrene (ABS) for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. ABS resists most household chemicals... Less

The NIBCO 4804 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a hub connection and a male National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end for connecting to a male unthreaded pipe and male NPT threads on the other for connecting to a female threaded pipe. The hub end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal... Less

The NIBCO 4803 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a hub connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end for connecting to a male unthreaded pipe and female NPT threads on the other for connecting to a male threaded pipe. The NPT threads create a tighter seal than straight threads, and the hub end connects to pipes with a smooth bore for enhanced flow. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal... Less

The NIBCO 435 schedule 40 adapter pipe fitting is made of PVC and has a slip connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female slip opening on one end for sliding over a male unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution... Less

The NIBCO 435 schedule 40 adapter pipe fitting is made of PVC and has a slip connection and a female National Pipe Taper (NPT) threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female slip opening on one end for sliding over a male unthreaded pipe and female NPT threads on the other end for connecting to a male threaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow, and the NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution... Less

The NIBCO 447 schedule 40 cap pipe fitting is made of PVC and has a slip connection. This cap fitting covers the outside of a pipe or fitting to close and terminate its end. It has a female slip opening for sliding over the end of a male unthreaded pipe. The slip end connects to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides... Less

The NIBCO 450 schedule 40 plug pipe fitting is made of PVC and has a male National Pipe Taper (NPT) threaded connection. This plug fitting inserts into a pipe or fitting to close and terminate its end. It has male NPT threads for connecting to a female threaded pipe, creating a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow... Less

The NIBCO 429 schedule 40 coupling pipe fitting is made of PVC and has slip connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female slip openings for sliding over the ends of male unthreaded pipes. The slip ends connect to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition... Less

The NIBCO 429 schedule 40 coupling pipe fitting is made of PVC and has slip connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female slip openings for sliding over the ends of male unthreaded pipes. The slip ends connect to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition... Less

The NIBCO 4551-H schedule 80 flange pipe fitting is made of PVC and has socket connections. This flange fitting joins two pipes or valves in a piping system or attaches a pipe to a flat surface or flange. It has female socket openings for sliding over the ends of male pipes. The socket end connects to pipes with a smooth bore for enhanced flow. This schedule 80 (thick wall) fitting is made of (Chemtrol) PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 80 PVC pipes and fittings, and is suitable for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. PVC can be connected to other materials such as steel, copper, or cast... Less

The NIBCO 4517-3 schedule 80 cap pipe fitting is made of PVC and has a female National Pipe Taper (NPT) threaded connection. This cap fitting covers the outside of a pipe or fitting to close and terminate its end. It has female NPT threads for connecting to a male threaded pipe, creating a tighter seal than straight threads. This schedule 80 (thick wall) fitting is made of (Chemtrol) PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 80 PVC pipes and fittings, and is suitable for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. PVC can be connected to other materials such as steel, copper, or cast iron using transition... Less

The NIBCO 429 schedule 40 coupling pipe fitting is made of PVC and has slip connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female slip openings for sliding over the ends of male unthreaded pipes. The slip ends connect to pipes with a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition... Less

The NIBCO 4501-3-3 schedule 80 coupling pipe fitting is made of PVC and has female National Pipe Taper (NPT) threaded connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. This schedule 80 (thick wall) fitting is made of (Chemtrol) PVC for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 80 PVC pipes and fittings, and is suitable for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. PVC can be connected to other materials such as steel,... Less

The NIBCO 4801-7 adapter pipe fitting is made of PVC for drain, waste, and vent systems (DWV) and has a hub connection and a slip-joint connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has a female hub opening on one end and a slip joint opening on the other for connecting to unthreaded pipes. Tightening the slip nut against the slip joint washer creates a compression seal against leaks and loosening the slip nut allows disassembly of the joined parts. This fitting is made of PVC for use in non-pressure residential and commercial drain, waste, and vent (DWV) sanitary systems. PVC resists corrosion and chemicals, exhibits high strength, and weighs less than fittings made from metal. PVC can be connected to other materials... Less