conductivity meter

The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe... Less

Digital Pocket Conductivity Meter With ATC & CAS This is a new Digital Pocket Conductivity Meter Digital display Pocket-sized Automatic temperature compensation Lightweight CE and RoHS approved Electrode extends to 3.15 Range: 10 to 9990 ppm Dimensions: 6.2 x 1.5 x 1.3 (157 x 38 x 33mm) Power Source: 1 â??9Vâ? battery (included) Includes hard carrying case, calibration solution, calibration screwdriver

Provides a fast and dependable way to measure the Total Dissolved Solids in your fountain solution from 0-to-1999 µS/cm with readouts in 1 µS/cm. It is ideally suited for frequent conductivity readings with its easy-to-read LCD. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature. Quality Control has never been easier. The conductivity meter uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and the meter automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds, the meter recognizes the calibration solution and calibrates itself! Conductivity Meter is supplied... Less

HI 8633 and HI 8733 have been designed specifically for use in areas of production and quality control. It is often necessary to test samples with different concentrations ranging from deionized water to brine. The amperometric system would require constant recalibration and probe changes, thus making the measurement process very time consuming and unreliable. To solve this problem, HANNA has developed the HI 8633, which uses a 4-ring potentiometric probe. The rugged probe is made of PVC - ideal for indoor, as well as outdoor measurements. By using one point calibration, it is now possible to obtain accurate readings across a very wide range, from 0.1 to 199900 ?S/cm. If temperature of the solution fluctuates, HI 8733, with a built-in temperature sensor and Automatic Temperature... Less

The Hanna Instruments HI 2315 Bench-Top Conductivity Meter with built-in auto-temperature compensation is a multi-range meter with built-in automatic temperature compensation for testing Conductivity. The Hanna Instrument HI2315 replaces EC 215 and features a large, easy to read LCD, solution holders and an attractive redesigned case. The Hanna Instruments HI2315 utilizes a four ring potentiometric probe with platinum sensor that offers greater versatility and accuracy over amperometric designs. + A potentiometric probe works on the principal of induction which eliminates the effects of polarization (a common problem of amperometric systems). Two outer rings apply an alternating voltage and induce a current loop in the solution while two inner rings measure the voltage drop induced by the... Less

This waterproof device measures Conductivity, TDS, and Salt and provides reliable results in seconds. Simply press a button and dip in water sample for instant readings. This meter measures 6x1/2 and comes with a scoop, pocket clip, and an extra battery.

The YSI Model 3100 Instrument is a benchtop, microprocessor- based conductivity, salinity, and temperature meter for laboratory use, with automatic temperature compensation, one-point calibration, adjustable temperature coefficient, an LCD screen, and automatic range searching for easy operation. The meter has a 7-pin mini DIN cell connector and takes a wide variety of YSI cells (3200 and 3400 series) including dip, fill, and flow-through types (not included). Some of these cells require an adapter (not included). The meter has UL, CSA, and CE certifications. Conductivity meters are commonly used in the water- quality testing, waste-water treatment, hydroponics, agriculture, and aquaculture industries, in cosmetics manufacturing, and in laboratory research. SpecificationsSpe cifications... Less

This Oakton pH/CON 10 Meter is a waterproof, portable pH, conductivity, and temperature meter for a variety of applications including environmental, agricultural, industrial, water quality testing, laboratorial, and educational. It has automatic temperature compensation, four-point calibration for conductivity, auto-buffer recognition for pH calibration, and auto-ranging for conductivity. The LCD screen has dual display of pH (or conductivity) plus temperature. It displays error messages, keypad and program functions, and various indicators. The waterproof, dustproof housing meets IP67 ratings. Conductivity meters, also known as electrical conductivity (EC) meters, measure the ability of a solution or material to conduct an electrical current. This measurement helps determine if the... Less

Specifications Product Type Conductivity Meters Meter style Portable Dimensions ( W) ... Less

Combination flat surface pH electrode with auto ranging high accuracy Conductivity cellFeatures: Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode9 units of measure: pH, ?S/cm, mS/cm, ppm, ppt, mg/L, g/L, ?C, ?FAnalog barograph indicates trendsMemory stores up to 25 labeled readingsAdjustabl e Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratioRENEW feature alerts user when electrode needs replacementOrder Conductivity standards and pH buffers separatelyComplet e with meter and electrode, protective cap, sample cup, four 3V CR-2032 batteries, and 48 (1.2m) neck strap

If you need a reliable, accurate electrical conductivity meter with automatic temperature compensation, the EC-3 is an excellent choice. Capable of dual ranges, either 0-999 or 1000 to 9990 micro-siemens, it is designed for a wide range of applications. With 1000 hour estimated battery life, you will appreciate the convenience and accuracy of the EC-3 for a long time.

Conductivity Meter Tester A very simple and easy unit to compare conductivity of different solutions, acids or salts. Dip the probes, press the button and note. The conductivity can be compared in 6 levels. Red LED gives a quick visual comparison. Stainless Steel probes 0.08 inch (2mm) dia. x 3.25 inch (80mm) L. Total length with probes 7 inch (180mm). Body 3.5 inch (90mm) L x 2.25 inch (60mm) x 1 inch (25mm) Thick. Requires 2 AA batteries, not included. Powered by eBay Turbo Lister The free li

Ultrameter II models deliver performance of +/-1% of reading (not merely full scale). This high level of accuracy has been achieved through advanced four-electrode conductivity cell technology and powerful microprocessor based circuitry. With displayed values of up to 9999, the full four-digit LCD ensures resolution levels never before possible in such affordable instruments. Factory calibrated with NIST traceable solutions, each Ultrameter II may be supplied with both certification of traceability and NIST traceable solutions for definitive calibration. á Features: Ultrameter II, Model 4PII Multi-Parameter: Conductivity, TDS, Resistivity, Temperature +/-1% Accuracy of Reading Memory Storage: Save up to 100 samples w/ Date & Time stamp... Less

This portable Liquidynamics Diesel Exhaust Fluid Conductivity Meter determines the conductivity of the Grade-3 de-ionized water used to flush new DEF equipment in order to meet ISO 22241-3 specific...

Pure Water Test (PWT) enables you to check the purity of your distilled or demineralized water in laboratory or industrial environments. Ultra Pure Water (UPW) is an ideal tester for Megohm checks. PWT is ideally suited for applications such as Printed Circuit Board washing, laundry, steam cleaning, checking car battery water and all areas where distilled, demineralized or pure water is used. This tester is housed in a durable case that provides excellent protection against harsh industrial environments. The casing also features a larger LCD than previous models and is easier to handle with a more ergonomic shape.HI 98308 (PWT) is supplied complete with protective cap, calibration screwdriver, batteries and instructions.

Simple 3-Button Operation Bright LCD Display with Ready Indicator Meet All USP Requirements VWR Three-Year Limited Warranty Ideally suited for soil testing and water/wastewater analysis, these dustproof and splashproof benchtop meters and waterproof handheld meters offer easy operation and a clear, intuitive user interface. Meters display conductivity, resistivity, salinity, TDS, and temperature. Meters also accept both four-electrode and two-electrode cells. A simple set-up menu and icon prompts simplify the measurement process for non-technical users. Up to 10 setup parameters and calibrations may be stored and password- protected, making them ideal for multiple users. Additional methods, as well as software updates, may be downloaded via the Web. Meters feature waterproof... Less

BlueLab Combo Meter SKU: BLU2300E The Bluelab Combo Meter is a conductivity, pH, and temperature meter all in one. It comes with a pH probe and conductivity and temperature probe.Just place it into the solution and the selected reading is displayed on screen. The Bluelab Combo Meter is portable and does not require a power supply. Calibration of the pH is very easy using the push buttons on the meter and fresh Bluelab calibration solutions. Conductivity and temperature do not need to be calibra

2 ranges: 2 mS, 20 mS. Digit height: 21.5 mm.

If you work with reverse osmosis or deionized water in a commercial or laboratory setting, you almost certainly need to own an electrical conductivity meter. A TDS meter would work, but then you would need to do the conversion math every time. An EC meter like the AP-2 with a +/- 2% accuracy rating will give you the exact information you want in the format you need. With a 0-9999 micro-siemen range, this meter will work for almost every water type.

Our laboratory/low cost light industrial conductivity sensors feature Graphite or Platinum ring technology. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. The low cost yet high quality Sensorex conductivity probes are suitable for use with most portable conductivity meters. By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe T fitting, or submerse them into a tank. Our general purpose models CS150 and CS150TC feature graphite measuring elements and the same durable epoxy body. For many applications, the epoxy body conductivity sensors are the lowest cost, most reliable conductivity sensor to use, especially for process or portable applications. Models CS200... Less

Digital Conductivity Meter This is a new digital conductivity meter Ideal for field checks of water-based solutions Includes CP4300 conductivity probe Also accepts optional CTOP2001conductiv ity/TDS probe Measures conductivity from 0 to 20 mS over two ranges Jumbo LCD display with 0.84 in. (21.5mm) digit height ATC Data hold RS-232 interface CE and RoHS approved Power Source: 1 â??9Vâ? battery (not included

The YSI 63 is a waterproof, portable pH, conductivity, salinity, and temperature meter with Automatic Temperature Compensation (ATC), automatic calibration, a multilevel LCD screen, a combination pH, electro- conductivity (EC), and salinity electrode with internal temperature sensor, and a housing with built-in probe storage chamber. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The multilevel screen simultaneously displays the current measurement and the current temperature. The meter stores 50 sets of readings with on-screen recall. The meter has Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures. Calibration can be performed at one, two, or three... Less

The YSI 63 is a waterproof, portable pH, conductivity, salinity, and temperature meter with Automatic Temperature Compensation (ATC), automatic calibration, a multilevel LCD screen, a combination pH, electro- conductivity (EC), and salinity electrode with internal temperature sensor, and a housing with built-in probe storage chamber. A pH meter is commonly used to measure the pH of substance such as water, food, beer, or wine in laboratory, industrial, and food applications. The multilevel screen simultaneously displays the current measurement and the current temperature. The meter stores 50 sets of readings with on-screen recall. The meter has Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures. Calibration can be performed at one, two, or three... Less