Cnc Stepper Motor Home and Garden - Shopping.com

Category

Building Supplies
Showing results for "cnc stepper motor"
Results 1 - 40 of 693

Cnc Stepper Motor Driver...

$48.66
eBay Cnc Stepper Motor Driver Controller 1.0-4.5a Dc20-50v For X-y Table Machine Diy
Free Shipping
/cnc-stepper-motor-driver/N6YRU5lR31MlaVAH6H_QjQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
CNC Stepper Motor Driver Controller 1.0-4.5A DC20-50V For X-Y Table Machine DIY More..   ΔTop Descriptions CNC Stepper Motor Driver Board Controller M542 1.0A-4.5A Descriptions The M542 Stepper Driver Board Controller is a high performance microstepping driver based on pure-sinusoidal current control technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoothe
More

JKM Nema 17 0.9 Degree 42mm...

$12.55
Banggood JKM Nema 17 0.9 Degree 42mm Two Phase Hybrid Stepper Motor 1.33A 34mm For CNC-Motor
Free Shipping
/jkm-nema-17-09-degree/Frl_hbx5Sjx-8j0MaLNY_g==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: JKM Nema 17 0.9 Degree 42mm Two Phase Hybrid Stepper Motor 1.33A 34mm For CNC Specification: Brand: JKM Model Number: JK42HM34-1334 Diameter of axle: 5mm Motor length: 34mm Boundary Dimension: 42*42mm Size: 42mm x 42mm x 34mm Holding Torque:2.2Kg.cm Certification: CE Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Stage Lighting,ect. Genaral Specification: Item Specifications Step Angle 0.9 Temperature Rise 80max Ambient Temperature -20~+50 Insulation Resistance 100 M Min. , 500VDC Dielectric Strength 500VAC for 1minute Shaft Radial Play 0.02Max. (450g-load) Shaft Axial Play 0.08Max. (450g-load) Max. radial force 28N (20mm from the flange) Max. axial force 10N Electrical Specification: Model No. Step Angle Motor Length Rate... Less
More

Diy 3 Axis Cnc Stepper Motor...

$9.95
eBay Diy 3 Axis Cnc Stepper Motor Driver Emi/noise Driver Protection Kit
+ $3.00 shipping
/diy-3-axis-cnc-stepper/JL2mg92ftvgO-qaKNuo2QA==/info
eBay
IN_STOCK ( In stock )
US Ship 3 Axis CNC Stepper Motor Driver EMI/Noise Driver Protection Kit Protect your CNC Stepper Drivers from motor feedback and noise.Kit Includes: (3) X,Y,Z axis Ferrite Rings (see pic #3 for use) about 4 or 5 turns work great.(1) Split Block Ferrite for your mains power.Ferrite beads prevent interference in two directions: from a device or to a device. A conductive cable acts as an antenna – if the stepper motors produce RF, Back EMI this can be transmitted through the cable,ferrite acts a
More

Diy 4 Axis Cnc Stepper Motor...

$10.95
eBay Diy 4 Axis Cnc Stepper Motor Driver Emi/noise Driver Protection Kit
+ $3.00 shipping
/diy-4-axis-cnc-stepper/wbmYW6LEip__F4AsVLrWIw==/info
eBay
IN_STOCK ( In stock )
US Ship 4 Axis CNC Stepper Motor Driver EMI/Noise Driver Protection Kit Protect your CNC Stepper Drivers from motor feedback and noise.Kit Includes: (4) X,Y,Z,A axis Ferrite Rings (see pic #3 for use) about 4 or 5 turns work great.(1) Split Block Ferrite for your mains power.Ferrite beads prevent interference in two directions: from a device or to a device. A conductive cable acts as an antenna – if the stepper motors produce RF, Back EMI this can be transmitted through the cable,ferrite acts
More

JKM Nema 11 Stepper Motor...

$12.04
Banggood JKM Nema 11 Stepper Motor 1200g.cm/0.67A Mill Laser Engraving-Motor
Free Shipping
/jkm-nema-11-stepper-motor/8vl8VEBoJ5fi0M63FOLCTw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: JKM Nema 11 Stepper Motor 1200g.cm/0.67A CNC Router Cut Mill Laser Engraving Brand: JKM Model: JK28HS51-0674 Rated Power:3W Rated Voltage: 12V Type: Hybrid Stepping Motor Size: 28MM * 28MM Motor length: 51mm Diameter of axle: 5mm The front shaft length: 18mm Outgoing line: 300mm (Plug is not included) Certification: CE,ROHS Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Stage Lighting,ect. Electrical Specifications: Model Step Angle ( ) Motor Length (mm) Rate Voltage (V) Rate Current (A) Phase Resistance () Phase Inductance (mH) Holding Torque (g.cm) Lead Wire (NO.) Rotor Inertia (g.cm) Motor Weight (KG) JK28HS51-0674 1.8 51 12 0.67 9.2 7.2 1200 4 18 0.2 General Specifications: Step Accurency Temperature RIse Ambient... Less
More

Cnc Servo Stepper Motor...

$37.24
eBay Cnc Servo Stepper Motor Driver 36v 10a Power Supply
Free Shipping
/cnc-servo-stepper-motor/DyVim3KvV46KHzJJIYc5sQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
CNC Servo Stepper Motor Driver 36V 10A Power Supply More..   Hi, you are bidding a 36V 10A DC 360W Regulated Switching Power Supply ! Item condition: 100% Brand New Model: S-350-36 ( *If you need other models, Please feel free to contact us. ) 1 x 36V 10A Power Supply Shipping Payment Warranty Estimated Delivery Time USA (excl. Alaska, Hawaii, Puerto Rico) USPS First-Class Package/UPS SurePost/UPS Ground 3-7 business days Other Countries (May depart from other stock location) International Air
More

23 Cnc Stepper Motor...

$24.50
eBay 23 Cnc Stepper Motor 1.9nm(269oz.in) Cnc Mill Lathe Router Robot
+ $7.35 shipping
/23-cnc-stepper-motor/OYmex5U2Hi2PLIaCrY-Kmg==/info
eBay
IN_STOCK ( In stock )
Description: This bipolar Nema 23 stepper motor is most popular, it with 1.8°step angle (200 steps/revolution) . Each phase draws 2.8A, allowing for a holding torque of 1.9Nm(269oz.in). Specifications: Manufacturer Part Number: 23HS30-2804S Step Angle: 1.8° Step Accuracy: 5% Holding Torque: 1.9Nm(269oz.in) Rated Current/phase: 2.8A Phase Resistance: 1.13ohms Voltage: 3.2V Inductance: 5.4mH±20%(1KHz) Weight: 1.1kg Lead length: 30cm Package Content: 1 x Nema 23 stepper Motor Payment Policy: We
More

4 Axis Cnc Stepper Motor...

$57.25
eBay 4 Axis Cnc Stepper Motor Driver Board Controller 4 Engraving Machine 3.5a Tb6560
Free Shipping
/4-axis-cnc-stepper-motor/toDA2_Jlh_G_a4GfHPlvbg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Shop All Categories - 4 Axis CNC Stepper Motor Driver Board Controller 4 Engraving Machine 3.5A TB6560 High power, maximum 3.5A drive current chipset ! 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step! Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors *Attention: This driver is the 1.5A-3A version, it's specially designed for stepper motors with rated current from 1.5A to
More

NEMA 24 2 Phase Robot Lathe...

$105.87
Walmart.com NEMA 24 2 Phase Robot Lathe CNC Stepper Motor 76mm 4A 311oz.in w Driver
Free Shipping
/nema-24-2-phase-robot/YQky30XsV0R3BjH2g696gw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
It is 2 phase. 1.8 Degree Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects.The driver supply voltage up to DC 50V, Output current up to 4.2A.15 selectable microstep resolutions (SW4: Off=Half Current; On= Full Current), Protection against power leads(+, -)reversal.Half current function refers to no step pulse after 500 ms, the output current of drives is automatically reduced to 70% of the rated output current, to prevent electrical heating.The first... Less
More

Cnc Stepper Motor Driver...

$104.50
eBay Cnc Stepper Motor Driver Board 3 Axis Nema23 Kit 24v 15a Power Supply 3.5a Mach3
+ $36.00 shipping
/cnc-stepper-motor-driver/cIIOGL9cYmCAZdU8m-q6jQ==/info
eBay
IN_STOCK ( In stock )
CNC Stepper Motor NEMA23 Kit 3 Axis 24V 15A Power Supply 3.5A Mach3 This item is located in California, USA/Shenzhen, China USA customers' order will be shipped via our USA California warehouse.NO USA VAT Other countries customers' order will be shipped via our China warehouse. Product Features: Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step Adjustable 1.5A-3A drive current setting
More

TB6560 3A CNC Router 1 Axis...

$6.45
Banggood TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers-Module Board
Free Shipping
/tb6560-3a-cnc-router-1/daHzTETjz-COLjJwGeGM5w==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers is available now from our US warehouse Free shipping to US in 3-6 business days ship to Canada, Brazil in 7-10 days TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers Specification: Size: 75 x 50 x 35mm / 2.95 x 1.96 x 1.37inch (L x W x H) Rated maximum output: 3A, peak 3.5A Working voltage: DC 10V-35V Recommended to use a switching power supply: DC24V power supply Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 Subdivisions. Feature: Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance. For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is... Less
More

Cnc Stepper Motor 3axis Nema...

$379.00
eBay Cnc Stepper Motor 3axis Nema 34 Dual Shaft 878oz.in=7nm 2a 98mm Free Shipping
Free Shipping
/cnc-stepper-motor-3axis/U69lfzyGoiH1NLYulAYL6A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Great News from Longs motor! Ship from USA warehouse, after payment, within 3~5days for receiving products!No taxes from customs for USA customers, no damage, better service, please don't hesitate!Free Ship by UPS!This item includes:1.3 pcs Nema 34 stepper motor 878oz. in bipolar with dual shaft 2.3 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC 3.3PC Power supply 350W-60VDC 4.1 PC Breakout board 1PC DB25 Cable Detailed information:1.Nema 34 stepper motor Mod
More

Tb6560 Cnc Stepper Motor...

$65.79
eBay Tb6560 Cnc Stepper Motor Driver Board Controller 3 Axis With Box Protection
Free Shipping
/tb6560-cnc-stepper-motor/8T469VWAjgjys9AM6Sl3bw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
New TB6560 CNC Stepper Motor Driver Board Controller 3 Axis With Box Protection More..   *NEW* 3 Axis TB6560AHQ Stepper Motor Driver Controller With Aluminium Box (0.5A-3.5A) Product Features Adopt Original Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset! Click here for TB6560AHQ Datasheet. Adjustable 0.5A-3.5A(Peak Current) Drive Current Settings: the ouput current of actual operation on each axis can be set to 20%, 50%, 75%, 100% of the Maximum Current. Adjustable Sub
More

3 Axis Cnc Stepper Motor...

$112.60
eBay 3 Axis Cnc Stepper Motor Driver Tb6560 Box Set + Lcd Display + Handle Controller
Free Shipping
/3-axis-cnc-stepper-motor/A75Miwv6a0BJ-VTnSQYXJQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3 Axis CNC Stepper Motor Driver TB6560 Box Set + LCD Display + Handle Controller More..   Top Descriptions Descriptions I. About the 3rd Generation TB6560 Stepper Controller Box This stepper controller box has been upgraded to an intelligent and industrial-level driver board set . The redesigned PCB board enables smoother control of motors. The totally enclosed optical isolation and bipolar constant-current chopper ensure a low noise low vibration operation environment, helping to avoid creepi
More

JKM NEMA17 Hybrid Stepper...

$12.99
Banggood JKM NEMA17 Hybrid Stepper Motor 2 Phase 1.8 For CNC Router -Motor
Free Shipping
/jkm-nema17-hybrid-stepper/HhUSX5vS8L6lzau1SCL-sw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: JKM NEMA17 Hybrid Stepper Motor 2 Phase 1.8 For CNC Router Milling Machine Brand Name: JKM Model: JK42HS34-1334 Motor length: 34mm Diameter of axle: 5mm The front shaft length: 24mm Static torque: 2.2kg.cm Wire: 4, Red B+ Blue B- Black A+ , Green A- Size: 42mm*42mm*34mm Outgoing line: 300mm (Plug is not included) Certification: CE, ROHS Scope: Widely used for 3D printers,monitor equipment, medical/textile/p ackaging machinery,stage lighting,ect Technique parameter: Item Specifications Step Angle 1.8 Temperature Rise 80max Ambient Temperature -20~+50 Insulation Resistance 100 MMin. , 500VDC Dielectric Strength 500VAC for 1minute Shaft Radial Play 0.02Max. (450g-load) Shaft Axial Play 0.08Max. (450g-load) Max.Radial Force 28N (20mm from the flange) Max.Axial Force 10N Technique... Less
More

Cnc Limit Switch Connection...

$14.99
eBay Cnc Limit Switch Connection Board Stepper Motor System
+ $3.50 shipping
/cnc-limit-switch/nqnVg2qE79ylVEFkfJG7ng==/info
eBay
IN_STOCK ( In stock )
This board makes connecting limit switches and home switches to your computer from your machine easy and gives the most positive active high input that can be used with virtually any CNC Software. It has a power supply input and a 5 volt DC regulator and pull up resistors that will send positive +5 volt input signals from your limit switch to your computer. It allows you to use any or all 5 of your computers input pins (any ones that your software allows) to input home or limit switch signals t
More

Geared Stepper Motor - Crank...

$27.00
eBay Geared Stepper Motor - Crank Voltage Generator Cnc Machine School Lab - Robotic
+ $5.75 shipping
/geared-stepper-motor/6mI-9vqgDqNW10DGfn73IA==/info
eBay
IN_STOCK ( In stock )
===== Yo Ho Me Hearty's ===== Welcome to Pirate Pete Electronics Lot of THREE Geared Stepper Motor - Generators New, taken from original manufacturers packaging. Japan Servo Co. Ltd., type KP48FP8G-504 geared stepper motor. Versatile 24 volt, geared stepper motor/generator. Two phase stepper motor with 3/25 internal gearing for large torque. Since this is a 24 volt motor with gearing, it also works great as a generator. Hand cranking the motor produces up to 100 volts peak! We were able to ligh
More

JKM 42mm Two Phase Hybrid...

$25.85
Banggood JKM 42mm Two Phase Hybrid Linear Stepper Motor 40mm Length For CNC Router-Motor
Free Shipping
/jkm-42mm-two-phase-hybrid/LwXEZX5wMDtAq9MwbMv0AA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: NEMA17 1.8Degree 1.68A JKM 42mm Hybrid Two Phase Stepper Motor 40mm Length For CNC Router Specification: Brand: JKM Model Number: JK42HS40-1704ACL Motor length: 40mm Boundary Dimension: 42*42mm Size: 42mm x 42mm x 40mm Diameter of axle: 8mm Holding Torque: 4.2Kg.cm Length of axis: 295mm, Tr8*2(Pitch) Certification: CE Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Stage Lighting,ect. Genaral Specification: Item Specifications Step Angle 1.8 Temperature Rise 80max Ambient Temperature -20~+50 Insulation Resistance 100 M Min. , 500VDC Dielectric Strength 500VAC for 1minute Shaft Radial Play 0.02Max. (450g-load) Shaft Axial Play 0.08Max. (450g-load) Max. radial force 28N (20mm from the flange) Max. axial force 10N Electrical... Less
More

4 Axis Tb6560 Cnc Stepper...

$81.59
eBay 4 Axis Tb6560 Cnc Stepper Motor Driver Board 0.5a-3.5a(peak) With Aluminum Box
Free Shipping
/4-axis-tb6560-cnc-stepper/sFth-7Kul1FM7CQYkPpvFA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
4 Axis Tb6560 Cnc Stepper Motor Driver Board 0.5A-3.5A(Peak) With Aluminum Box More..   Top Descriptions NEW* 4 Axis TB6560AHQ Stepper Motor Driver Controller With Aluminium Box (0.5A-3.5A) Product Features Adopt Original Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset! Click here for TB6560AHQ Datasheet. Adjustable 0.5A-3.5A(Peak Current) Drive Current Settings: the ouput current of actual operation on each axis can be set to 20%, 50%, 75%, 100% of the Maximum Current.
More

Us Ship 4pcs High Torque Nema...

$132.00
eBay Us Ship 4pcs High Torque Nema 23 Cnc Stepper Motor 425oz.in 4-lead Diy Cnc Kit
Free Shipping
/us-ship-4pcs-high-torque/s_2cDMvTLWLvZWpaEAELDg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
US Ship 4pcs High Torque Nema 23 CNC Stepper Motor 425oz.in 4-Lead DIY CNC Kit From our USA warehouse via fast shipment within one days handling time free shipping and free TAX to USA Package include: · 4x 23HS2430B Dual shaft Stepper Motor (112mm Length 425Oz-in/3A) General Specification: Step angle accuracy:+ - 5%(full step,not load) Resistance accuracy: + - 10% Inductance accuracy:+ -20% Temperature rise: 80deg Max(rated current,2 phase on) Ambient temperature ----------?20deg ---- +50deg I
More

3pcs Nema 23 Cnc Stepper...

$91.69
eBay 3pcs Nema 23 Cnc Stepper Motor 2.8a 179oz.in 56mm Bipolar For Hobby Cnc Kit
Free Shipping
/3pcs-nema-23-cnc-stepper/qv7siOcOXJoiYNFdfSKO5A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
3PCS Nema 23 CNC Stepper Motor 2.8A 179oz.in 56mm Bipolar for Hobby CNC Kit Item Description Package in 3PCS 1.26Nm(178.5oz.in) holding torque NEMA 23 bipolar 2.24x2.24x2.2 4-wire 1.8 deg. step angle(200 steps/rev)Rated current 2.8A resistance 0.9ohms Features This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution) . Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in) . Electrical Specification: * Manufacturer Part Number: 23HS22-2804S * Motor
More

Cnc Power Supply 350w 60v 6a...

$47.65
eBay Cnc Power Supply 350w 60v 6a For Cnc Stepper Motor Driver Ma860h M542h Nema34
Free Shipping
/cnc-power-supply-350w-60v/6WprmTQFaS-8PwRppAFi0Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
CNC Power Supply 350W 60V 6A For CNC Stepper Motor Driver MA860H M542H NEMA34 More..   ΔTop Descriptions S-350-60V 6A Switching Power Supply Description This professional and highpower 350W 60V 6A Switching Power Supply can be widely used in Industrial Automation, personal CNC Stepper/Servo System DIY, CCTV Devices and LED Lighting Devices. Powerful functions(eg. PWM control) and professional designs(Built-in big fan for cooling) ensure high efficiency and high reliability of the power supply
More

NEMA 8 2 Phase Lathe CNC...

$45.69
Walmart.com NEMA 8 2 Phase Lathe CNC Stepper Motor 40mm 0.6A 3.7oz.in w M415B Driver
Free Shipping
/nema-8-2-phase-lathe-cnc/R__bigO-Ra5h17XjSoDE0g==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
It is 2 phase. 1.8 Celsius Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics, RepRap, Markerbot, CNC Router AND OTHER projects..The driver supply voltage up to +40VDC, Output current up to 1.5A. Inaudible 20 KHz chopping frequency. TTL compatible and optically isolated input signals.7 selectable microstep resolutions: 1, 2, 4, 8, 16, 32, 64. Protection against power leads(+, -)reversal.The first three switch (SW1, SW2, SW3) of the DIP switch are used to set the current. Select a setting closest to your... Less
More

Geared 24v Stepper Motor /...

$14.00
eBay Geared 24v Stepper Motor / High Voltage Crank Generator Cnc Machine 24 Volt
+ $2.60 shipping
/geared-24v-stepper-motor/EWIVSdzLiQJr1_fZWtUwWA==/info
eBay
IN_STOCK ( In stock )
===== Yo Ho Me Hearty's ===== Welcome to Pirate Pete Electronics One piece Geared Stepper Motor - Generator New from original manufacturers packaging. One Japan Servo Co. Ltd., type KP48FP8G-504 geared stepper motor. Versatile 24 volt, geared stepper motor/generator. Two phase stepper motor with 3/25 internal gearing for large torque. Since this is a 24 volt motor with gearing, it also works great as a generator. Hand cranking the motor produces up to 100 volts peak! We were able to light up a
More

Nema 23 Cnc Stepper Motor...

$19.00
eBay Nema 23 Cnc Stepper Motor 1.26nm(179oz.in) Bipolar Diy Cnc Router Mill
+ $7.35 shipping
/nema-23-cnc-stepper-motor/8SL4NIjs7-ywhQeA8TY5Tw==/info
eBay
IN_STOCK ( In stock )
Description: This bipolar Nema 23 stepper motor with 1.8°step angle (200 steps/revolution) . Each phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.5oz.in) . Specifications: Manufacturer Part Number: 23HS22-2804S Step Angle: 1.8° Step Accuracy: 5% Holding Torque: 1.26Nm(178.5oz.in) Rated Current/phase: 2.8A Phase Resistance: 0.9ohms Voltage: 2.52V Inductance: 2.5mH±20%(1KHz) Weight: 700g Lead length: 30cm Package Content: 1 x Nema 23 stepper Motor
More

40 Plastic Cable Wire Chain...

$11.95
eBay 40 Plastic Cable Wire Chain Carrier 1523 10/15 For Cnc Stepper Motor C4-5
+ $3.95 shipping
/40-plastic-cable-wire/ifFIU5eQJDqV0LazthANgQ==/info
eBay
IN_STOCK ( In stock )
40 Plastic Cable Wire Chain Carrier 15*23 10/15 for CNC Stepper motor milling This is a 40 long plastic Cable Carrier. Use for protecting electric cables and hoses. Suitable for any application such as CNC, pick and place etc. Feature : Inner height: 10mm Inner width: 15mm Outer height: 15.5mm Outer width: 23mm High Quality Shipping Shipping Options: Domestic Shipping (US): We will ship via the United States Postal Service (USPS), Fedex and UPS. UPS/Fedex does not deliver to PO Boxes. If your
More

JKM Nema 17 42mm Hybrid...

$16.99
Banggood JKM Nema 17 42mm Hybrid Stepper Motor 70oz-in 48mm 2.5A For CNC -Motor
Free Shipping
/jkm-nema-17-42mm-hybrid/VlR3HbgySa6Ii16nAaiCHQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: Nema 17 42mm Hybrid Stepper Motor 70oz-in 48mm 2.5A For CNC Router Specification: Brand: JKM Model: JK42HS48-2504 Motor length: 48mm Diameter of axle: 5mm The front shaft length: 24mm Size: 42mm * 42mm * 48mm Holding Torque:5.0kg.cm 70oz.in Outgoing line: 300mm (Plug is not included) Certification: Certification: CE,ROHS Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery, Stage Lighting,ect. Genaral Specification: Item Specifications Step Angle 1.8 Temperature Rise 80max Ambient Temperature -20~+50 Insulation Resistance 100 M Min. , 500VDC Dielectric Strength 500VAC for 1minute Shaft Radial Play 0.02Max. (450g-load) Shaft Axial Play 0.08Max. (450g-load) Max. radial force 28N (20mm from the flange) Max. axial force 10N Electrical... Less
More

36v Power Supply For Cnc...

$37.71
eBay 36v Power Supply For Cnc Servo Stepper Motor Driver
Free Shipping
/36v-power-supply-for-cnc/D989pSiPEMPUMmW2T0I5bw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
36V Power Supply For CNC Servo Stepper Motor Driver NEW More..   Hi, you are bidding a 36V 10A DC 360W Regulated Switching Power Supply ! Item condition: 100% Brand New Model: S-350-36 ( *If you need other models, Please feel free to contact us. ) 1 x 36V 10A Power Supply Estimated Delivery Time USA (excl. Alaska, Hawaii, Puerto Rico) USPS First-Class Package/UPS SurePost/UPS Ground 3-7 business days Alaska, Hawaii, Puerto Rico (May depart from other stock location) USPS First-Class Package/US
More

Sainsmart Tb6600 Cnc...

$37.52
eBay Sainsmart Tb6600 Cnc Micro-stepping Stepper Motor Driver 4.5a
Free Shipping
/sainsmart-tb6600-cnc/dUObNREQeW2hw3Xrox6Veg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
SainSmart TB6600 CNC Micro-Stepping Stepper Motor Driver 4.5A For lots of other items, visit My Store Description SainSmart TB6600 CNC Micro-Stepping Stepper Motor Driver 4.5A Features SainSmart TB6600 CNC Micro-Stepping Stepper Motor Driver 4.5A Additional Information Manufacturer: SainSmart Shipping Weight: 75 Product Dimensions: Width: 3.62 Length: 5.12 Height: 1.65 Free shipping to the lower 48 states! Most items will ship within 24 hours of receiving payment. All items ship from the USA!Don
More

Sainsmart 4 Axis Tb6560 Cnc...

$85.76
eBay Sainsmart 4 Axis Tb6560 Cnc Stepper Motor Driver Controller Board Kit57 T...
Free Shipping
/sainsmart-4-axis-tb6560/617e5EnQDFO3h68KrMoxmg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
SainSmart New 4 Axis TB6560 CNC Stepper Motor Driver Controller Board Kit,57 two-phase,3A Description Brand New. SainSmart New 4 Axis TB6560 CNC Stepper Motor Driver Controller Board Kit,57 two-phase,3A The ST330 is a compact single axis bipolar 3.0A/phase stepper motor micro stepping driver with step and direction inputs, DIP switch settable step mode (full, half, eight and sixteenth- S3/S4), torque (100%, 75%,50%, 20%-S5/S6) , work Current (0-3A-SW1/SW2/SW3) and decay mode (0%, 25%, 50% and 100%
More

NEMA 23 2 Phase Mill Robot...

$33.26
Walmart.com NEMA 23 2 Phase Mill Robot Lathe CNC Stepper Motor 51mm 2.5A 156oz.in
Free Shipping
/nema-23-2-phase-mill/C4_KMI-PbQbs1sXYmAarIw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
It is 2 phase. 1.8° Step Angle. High Step Accuracy and Resolution. Low Vibration and Noise.Can be Customized for Winding Current, Shaft Options, Cables and Connectors. Typical Applications for Nema Stepper Motor: Inject printers, Analytical and Textile Equipment, Embroidery Machine, Precision Telescope Positioning Systems, High Speed Dome Camera and Robotics.Nema stepper motors for your DIY RepRap, Markerbot, CNC Router AND OTHER projects..For more detail information about the motor, please enter the website:http://54. 235.23.96 /watch_images/57H S5630A4.png
More

Cnc Timing Belt 60 Tooth W...

$5.99
eBay Cnc Timing Belt 60 Tooth W Kevlar For Stepper Motor
+ $3.50 shipping
/cnc-timing-belt-60-tooth/I4H0qi6wNEi2q0VIxUin6Q==/info
eBay
IN_STOCK ( In stock )
WE SHIP INTERNATIONALLY PLEASE ASK FOR A REQUEST! Watch this video to see how to figure pulley centers for belts and pulleys http://www.youtube. com/v/kBk_n2lzzg4 You are buying one brand new timing belt. SPECIFICATIONS: Belt width 3/8 Belt pitch 0.200 XL Number of grooves 60 Belt Structure Urethane with kevlar See also EBAY ITEM # 331110765858 CNC Stepper Motor Servo Motor Belt Sizing Tool for any XL Belt to 120 teeth Brand new product. It is convenient and easy to use to Figure out what XL si
More

Cnc Timing Belt 55 Tooth W...

$5.99
eBay Cnc Timing Belt 55 Tooth W Kevlar For Stepper Motor
+ $3.50 shipping
/cnc-timing-belt-55-tooth/T3ohqlQycwtCVmKiUYa5pA==/info
eBay
IN_STOCK ( In stock )
WE SHIP INTERNATIONALLY PLEASE ASK FOR A REQUEST! Watch this video to see how to figure pulley centers for belts and pulleys http://www.youtube. com/v/kBk_n2lzzg4 You are buying one brand new timing belt. SPECIFICATIONS: Belt width 3/8 Belt pitch 0.200 XL Number of grooves 55 Belt Structure Urethane with kevlar See also EBAY ITEM # 331110765858 CNC Stepper Motor Servo Motor Belt Sizing Tool for any XL Belt to 120 teeth Brand new product. It is convenient and easy to use to Figure out what XL si
More

Cnc Timing Belt 120 Tooth W...

$5.99
eBay Cnc Timing Belt 120 Tooth W Kevlar For Stepper Motor
+ $3.50 shipping
/cnc-timing-belt-120-tooth/TRl1ke3Mvk-yx-ZpZ5O1nw==/info
eBay
IN_STOCK ( In stock )
WE SHIP INTERNATIONALLY PLEASE ASK FOR A REQUEST! Watch this video to see how to figure pulley centers for belts and pulleys http://www.youtube. com/v/kBk_n2lzzg4 You are buying one brand new timing belt. SPECIFICATIONS: Belt width 3/8 Belt pitch 0.200 XL Number of grooves 120 Belt Structure Urethane with kevlar See also EBAY ITEM # 331110765858 CNC Stepper Motor Servo Motor Belt Sizing Tool for any XL Belt to 120 teeth Brand new product. It is convenient and easy to use to Figure out what XL s
More

JK0220 Two Phase Hybrid...

$25.99
Banggood JK0220 Two Phase Hybrid Stepper Motor Driver DC12V-36V 0.3A-2.0A For CNC Robots -Motor
Free Shipping
/jk0220-two-phase-hybrid/-hk6rNRCvO-muJQzeK-yEg==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: JK0220 Two Phase Hybrid Stepper Motor Driver DC12V-36V 0.3A-2.0A For CNC Robots Specification: Type JK0220 DC Input Voltage 12V-36V AC Input Voltage 12-24V Output Current 0.3A - 2.0A Operating Temperature -10 - 45 Storage Temperature -20 - 125 Weight 180g Humidity No condensation, no water droplets Gas Prohibition of combustible gasses and conductive dust Feature: Average current control, two phase sinusoidal current output. Photoelectric isolation signal input and output. With overvoltage undervoltage over-current interphase short circuit protection function. Eight channels subdivison and automatic idle-current reduction. Eight channels output phase current setting. Can drive 2 phase and 4 phase hybrid stepper motor when phase current less than 2.0A. 20KHz PMW Usage:... Less
More

Cnc Timing Belt 65 Tooth W...

$5.99
eBay Cnc Timing Belt 65 Tooth W Kevlar For Stepper Motor
+ $3.50 shipping
/cnc-timing-belt-65-tooth/kGHQCnWroMYfQSrhGEcvNA==/info
eBay
IN_STOCK ( In stock )
WE SHIP INTERNATIONALLY PLEASE ASK FOR A REQUEST! Watch this video to see how to figure pulley centers for belts and pulleys http://www.youtube. com/v/kBk_n2lzzg4 You are buying one brand new timing belt. SPECIFICATIONS: Belt width 3/8 Belt pitch 0.200 XL Number of grooves 65 Belt Structure Urethane with kevlar See also EBAY ITEM # 331110765858 CNC Stepper Motor Servo Motor Belt Sizing Tool for any XL Belt to 120 teeth Brand new produc t. It is convenient and easy to use to Figure out what XL s
More

Cnc Timing Belt 50 Tooth W...

$5.99
eBay Cnc Timing Belt 50 Tooth W Kevlar For Stepper Motor
+ $3.50 shipping
/cnc-timing-belt-50-tooth/kL_oW1tk9borWpxWd2EDXw==/info
eBay
IN_STOCK ( In stock )
WE SHIP INTERNATIONALLY PLEASE ASK FOR A REQUEST! Watch this video to see how to figure pulley centers for belts and pulleys http://www.youtube. com/v/kBk_n2lzzg4 You are buying one brand new timing belt. SPECIFICATIONS: Belt width 3/8 Belt pitch 0.200 XL Number of grooves 50 Belt Structure Urethane with kevlar See also EBAY ITEM # 331110765858 CNC Stepper Motor Servo Motor Belt Sizing Tool for any XL Belt to 120 teeth Brand new product. It is convenient and easy to use to Figure out what XL si
More

Stepper Motor Nema 34 Dual...

$179.55
eBay Stepper Motor Nema 34 Dual Shaft1600oz-in 3.5a Cnc Machine Free Shipping Usa
Free Shipping
/stepper-motor-nema-34/uJgttNq9GfWfiTIP8LEoog==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Great News from Longs motor! Ship from USA warehouse, after payment, within 3~5days for receiving products!No taxes from customs for USA customers, no damage, better service, please don't hesitate!Free Ship by UPS!This item includes:1.1PC Nema34HS5435C- 02B2 stepper motor 1600oz.in=10.5N.m 3.5A 151mm , dual shaft 2.1 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC 3.1PC Power supply 350W-60VDC 4.1 PC Breakout board 1PC DB25 Cable Detailed information:1. Nema34HS
More

Nema23 Cnc Router Stepper...

$48.66
eBay Nema23 Cnc Router Stepper Motor 2 Phase 4-wire Gb23h282-30-4a Single Shaft 2.1nm
Free Shipping
/nema23-cnc-router-stepper/1AtdQEgoW-aUPxngxzxqdw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Nema23 CNC Router Stepper Motor 2 Phase 4-Wire GB23H282-30-4A Single Shaft 2.1Nm More..   CNC NEMA 23 Stepper Motor GB23H282-30-4A 300 Oz-in Descriptions You are watching the latest Nema23 GB23H282-30-4A hybrid stepper motor. It can work very well with the TB6560, M542, M542H, 2M542, DM542A, DQ542MA, MA860H, 2MA860, DM860A and DQ860MA etc stepper drivers sold in the market. Due to the high 300 Oz-in holding torque, low vibration and low noise, this motor can be widely used in office/home autom
More

Stepper Motor Nema 34 Dual...

$629.00
eBay Stepper Motor Nema 34 Dual Shaft1600oz-in 3.5a Cnc Kit Or Mill Free Shipping Usa
Free Shipping
/stepper-motor-nema-34/g0REAGKKCaILfXdPSSXsQg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Great News from Longs motor! Ship from USA warehouse, after payment, within 3~5days for receiving products!No taxes from customs for USA customers, no damage, better service, please don't hesitate!Free Ship by UPS!This item includes:1.4PC Nema34HS5435C- 02B2 stepper motor 1600oz.in=10.5N.m 3.5A 151mm , dual shaft 2.4 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC 3.4PC Power supply 350W-60VDC 4.1 PC Breakout board 1PC DB25 Cable Detailed information:1. 4 PC Nem
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388