Category

Tools and Accessories
Showing results for "cnc stepper motor driver kit"
Results 1 - 40 of 1500+

Cnc Stepper Motor Video...

$9.99
eBay Cnc Stepper Motor Video Mini-course-setti ng-up-hardware
+ $2.99 shipping
/cnc-stepper-motor-video/cVV0_3RmHV2peFbR_o_d7A==/info
eBay
IN_STOCK ( In stock )
21 minute .mpg on CD Video Mini Course, on setting up your CNC hardware Stepper motors, drivers, power supplys, breakout boards. Wiring and testing and getting ready to receive software signals to run. May also be a guideline for what drivers and power supplys, and other hardware,to buy to run your stepper motors if you have not already purchased. Course goes into 4 wire motors, 6 wire motors, 8 wire motors, Unipolar driveres, Bipolar drivers, and Power supplys, and connecting for receiving com
More

Cnc Stepper Motor Booklet...

$6.99
eBay Cnc Stepper Motor Booklet limit Switches For Beginners
+ $3.24 shipping
/cnc-stepper-motor-booklet/kNh3zNXUFrYlFnrw6IAuQg==/info
eBay
IN_STOCK ( In stock )
Also covered are Home switches and reference homeing. Coordinate systems, a simplified explanation to help you better understand Simplified relay control systems connection. Emergency stop buttons and their proper connection explained.
More

AUTONICS A16KG268 Stepper...

$163.75
Zoro AUTONICS A16KG268 Stepper Motor, 2Ph, 56 mm Frame, Shaft Type
Free Shipping
/autonics-a16kg268-stepper/GEYg-O7oJnpZj9YBNn6wfg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Stepper Motor, 2 Phase, Frame Size NEMA 23 / 56mm, Solid Shaft Shaft Type, Max. Holding Torque 1.54 Nm / 218.03 ozin, Resolution 1.8 deg Full Step, Amps Per Phase 2, Rotor Inertia 470.0 gcm2, Winding Resistance 2.50 ohms, Overall Length 31/16 In., Height 23/16 In, Width 23/16 In, Shaft Dia. 8mm, Shaft Length 19mm, Face Mounting, Mounting Pattern 47.14 x 47.14mm, Requires Driver 5PFF7, Controller 5PFF8 or 5PFF9, Cable 5PFG0 or G2197657, CE, RoHS
More

Cnc Stepper Motor Hook Up...

$9.99
eBay Cnc Stepper Motor Hook Up Wire 22/5 Buy 10' Increments
+ $3.99 shipping
/cnc-stepper-motor-hook-up/cYn9ZC3-08zKmpI5NZotKQ==/info
eBay
IN_STOCK ( In stock )
Buy as many as you need, we ship as one continuous piece of wire. This is 22/6 wire with stranded individual wires for flexability and long life 7 strands per wire. The strands are spiraled in an individual wire, and the wires are spiraled down the length
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 1/2 X 1/2 & Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/4kDHI12ZUQwHYT5lBkhd8Q==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 1/2 Bore, and one half 1/2bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don't have to take the coupling off to sep
More

6.35mm to 6.35mm CNC Stepper...

$10.27
Sears Marketplace 6.35mm to 6.35mm CNC Stepper Motor Shaft Coupling Coupler for Encoder
No Shipping Info
/635mm-to-635mm-cnc/InGh9iMgfCfrQg2tsEkLhg==/info
Sears Marketplace
IN_STOCK ( In stock )
Product Details Product Name : Motor Shaft Coupler;Material : Aluminium Inner Diameter : 6.35mm / 1/4, 6.35mm / 1/4;Total Size : 20 x 25mm / 0.8 x 1(DH) Color : Silver Tone Weight : 18g Pacakage Content : 1 x Motor Shaft Coupler Technical Details Part Number: Amico Item Weight: 0.8 ounces Product Dimensions: 5.3 x 3.9 x 0.4 inches Origin: China SKU: ADIB00DCAIU3Y
More

Cnc Stepper Motor Drive...

$9.99
eBay Cnc Stepper Motor Drive Coupling 5/16 Bores
+ $2.49 shipping
/cnc-stepper-motor-drive/kgZS-3-ttDBVCz36qn8GpQ==/info
eBay
IN_STOCK ( In stock )
You are buying one coupling with a 5/16 bore both ends. The coupling specks: Bore 5/16 Torque rating= 23.6 inch pounds Outside Diameter=1 Length=1-1/2
More

Cnc Stepper Motor Drive...

$9.99
eBay Cnc Stepper Motor Drive Coupling 3/8 Bores
+ $2.49 shipping
/cnc-stepper-motor-drive/yLzVQsEOT8PD4f153RiCeA==/info
eBay
IN_STOCK ( In stock )
You are buying one coupling with a 3/8 bore both ends. The coupling specks: Bore 3/8 Torque rating= 23.6 inch pounds Outside Diameter=3/4 Length=1 No keyway, setscrews only PROBLEMS with the Shipment -- Communicate with us ONLY BY EBAY MESSAGE. DO NOT communicate with the paypal email beginning alice.hubbard, this is an order Depository email only, we do not monitor it. Important note about SHIPPING: ·ON Multiple item orders only,NOT on single item orders , SHIPPING COST totals can become
More

Miniature Stepper Motor - 5v...

$7.95
eBay Miniature Stepper Motor - 5v - Driver Circuit Schematic
No Shipping Info
/miniature-stepper-motor/7Uq6hcpO5aEJBKF1PVwUHw==/info
eBay
IN_STOCK ( In stock )
Miniature Stepper Motor - 5V with Driver Circuit Schematic Brand new precision miniature stepper motor Manufactured by Symbol Technologies Operates on 5 VDC 2 phase bi-polar / quadrature motor 20 steps per revolution Motor includes a printed copy of a simple driver circuit schematic Driver circuit schematic uses 1 - 74HC86, 1 - 74HC365 and 1 - 4013 integrated circuit and operates at 5 V Knurled shaft dimensions: .3 L x .06 Diameter Motor dimensions (not including shaft): .8 Dia. x .68 H 5 l
More

Cnc Stepper Motor Spiral...

$9.99
eBay Cnc Stepper Motor Spiral Cupling 1/4 By 1/4 Shaft Bores
+ $2.99 shipping
/cnc-stepper-motor-spiral/62GjfKBlcguTOvVO1AYv4Q==/info
eBay
IN_STOCK ( In stock )
Spiral Cupling for CNC Stepper Motors or Servo Motors. Bore size 1/4 one side and 1/4 on the other side. Material is aluminum with set screws. Overall 3/4 in diameter and 1 in length PROBLEMS with the Shipment -- Communicate with us ONLY BY EBAY MESSAGE. DO NOT communicate with the paypal email beginning alice.hubbard, this is an order Depository email only, we do not monitor it. ·ONMultiple item orders only,NOT on single item orders , SHIPPING COST totals can become UNREASONABLY HIGH due
More

Cnc Stepper Motor Spiral...

$9.99
eBay Cnc Stepper Motor Spiral Cupling 1/4 By 3/8 Shaft Bores
+ $2.99 shipping
/cnc-stepper-motor-spiral/gkdqYvXK3SaP7vIrxcuqag==/info
eBay
IN_STOCK ( In stock )
Spiral Cupling for CNC Stepper Motors or Servo Motors. Bore size 1/4 one side and 3/8 on the other side. Material is aluminum with set screws. Overall 3/4 in diameter and 1 in length PROBLEMS with the Shipment -- Communicate with us ONLY BY EBAY MESSAGE. DO NOT communicate with the paypal email beginning alice.hubbard, this is an order Depository email only, we do not monitor it. ·ONMultiple item orders only,NOT on single item orders , SHIPPING COST totals can become UNREASONABLY HIGH due
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy Keyed 1/2 Bore
+ $2.49 shipping
/cnc-stepper-motor-drive/8whtJxdN1A5tFgj5ptr0Pg==/info
eBay
IN_STOCK ( In stock )
WE SHIP INTERNATIONALLY on REQUEST! See a brief video on how these work http://www.youtube . com/v/uGzWaPYtk1g You are buying one half of a lovejoy coupling with 1/2 bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting buna-N rubber spyder for low noise power transmition, and is super easy to disassemble.To make a complete assembly you will need to buy another Half coupling with the bore size you require, and a hard rubber spyder available in other
More

Cnc Stepper Motor Spiral...

$9.99
eBay Cnc Stepper Motor Spiral Cupling For 1/4 Bore Couple To 1/2 Bore
+ $2.99 shipping
/cnc-stepper-motor-spiral/F7PIWHF_7_yC3gik3_fbNA==/info
eBay
IN_STOCK ( In stock )
Spiral Cupling for CNC Stepper Motors or Servo Motors. Bore size 1/4 one side and 1/2 on the other side. Material is aluminum with set screws. Overall 1 in diameter and 1 1/8 in length PROBLEMS with the Shipment -- Communicate with us ONLY BY EBAY MESSAGE. DO NOT communicate with the paypal email beginning alice.hubbard, this is an order Depository email only, we do not monitor it. ·ONMultiple item orders only,NOT on single item orders , SHIPPING COST totals can become UNREASONABLY HIGH du
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 3/8 X 1/2& Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/8q-RGYxIJ2HJySaw8UKMmw==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 3/8 Bore, and one half 1/2bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don't have to take the coupling off to sep
More

Cnc Stepper Motor Power...

$19.99
eBay Cnc Stepper Motor Power Supply 5v-12 A. 12v- .4 A.
+ $12.65 shipping
/cnc-stepper-motor-power/0NpOxUoS4kbWm_rL5JLfvw==/info
eBay
IN_STOCK ( In stock )
You are buying a power supply with 120 v. ac input. Output DC. +5 volts @ 12 amps, +12 volts @ 0.4 amps, and -12 volts @ 0.4 amp. Dimensions 8 x 4.25 x 2.
More

Cnc Stepper Motor Step & Dir...

$39.99
eBay Cnc Stepper Motor Step & Dir Pulse Generator
+ $5.99 shipping
/cnc-stepper-motor-step/Hrfc3X_lKC_XZtnCETbCdg==/info
eBay
IN_STOCK ( In stock )
-Enter our ebay CNC store by clicking store home on the left or a category. This is a must have device for those of you in CNC. This is a handy little STEP and DIRECTION signal Generator 1-3/4w. X 3l. X 7/8t. It is easy to use, with allagator clips to clip on-to your step and direction inputs and your signal ground inputs on your driver board. Turn the on switch on and the motor will turn if your driver is working. It has a reversing switch, and two pots to tune the step pulse width and the
More

STEPPER MOTOR 14 20MM

$40.89
Sears Marketplace STEPPER MOTOR 14 20MM
No Shipping Info
/stepper-motor-14-20mm/HSKs65zkesHkZyBhnEat5Q==/info
Sears Marketplace
IN_STOCK ( In stock )
20mm Bipolar NEMA 14 Stepper MotorFor any project that requires precise motor control, stepper motors are where the rubber meets the road. Providing both exacting motion at a variety of speeds, and high holding torque, when not in motion, they are at the heart of most CNC projects.
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 5/16 X 5/16+spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/Dca11DKSb_mhBYCXnDxqxA==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 5/16 Bore, and one half 5/16bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don't have to take the coupling off to s
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 3/8 X 5/8& Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/LjmtRKlghExbFmyk93wSpw==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 3/8 Bore, and one half 5/8bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don't have to take the coupling off to sep
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 1/2 X 5/8 & Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/Uw7C8hMfW4_lpKY9f0Q_8A==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 1/2 Bore, and one half 5/8bore and the spider is buna N rubber. No keway, set screw fastening two per half. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. Yo
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 5/8 X 5/8 & Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/cdbinCfupINRYFHehS9Qew==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 5/8 Bore, and one half 5/8bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don't have to take the coupling off to sep
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 5/16 X 1/2+spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/kDHi-D6CYfd2ACX7oZeQVQ==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 5/16 Bore, and one half 1/2bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. Overall length assembled is 1-5/8 You don't
More

Cnc Stepper Motor Lovejoy...

$12.49
eBay Cnc Stepper Motor Lovejoy Coupling 8mm X 12mm & Spider
+ $3.50 shipping
/cnc-stepper-motor-lovejoy/yb6DzJiRwUATcdaO_tDguA==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 8mm Bore, and one half 12mm bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don't have to take the coupling off to sep
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy 14mm Bore
+ $2.49 shipping
/cnc-stepper-motor-drive/dItaJO8c4kLfpC8fNOM3Iw==/info
eBay
IN_STOCK ( In stock )
We will ship outside the USA on request. See a brief video on how these work http://www.youtube . com/v/uGzWaPYtk1g you are buying one half of a lovejoy coupling with 14 mm bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting buna-N rubber spyder for low noise power transmition, and is super easy to disassemble.To make a complete assembly you will need to buy another Half coupling with the bore size you require, and a hard rubber spyder available i
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy 6mm Bore
+ $2.49 shipping
/cnc-stepper-motor-drive/nXdXH9S7Tz9QGbqFZGGbLg==/info
eBay
IN_STOCK ( In stock )
you are buying one half of a lovejoy coupling with 6 mm bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting buna-N rubber spyder for low noise power transmition, and is super easy to disassemble. To make a
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy 8mm Bore
+ $2.49 shipping
/cnc-stepper-motor-drive/vjfcOrYjq-axGCdXUxAQvg==/info
eBay
IN_STOCK ( In stock )
All our Lovejoy motor couplings are madel LO-50 diameter is 1.08, assembled length with spider is 1-5/8 then coupled to the shaft with set screws in each half. There are no keyways unless otherwise noted.We will ship outside the USA on request. See a brief video on how these work http://www.youtube . com/v/uGzWaPYtk1g you are buying one half of a lovejoy coupling with 8 mm bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting buna-N rubber spyder
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy 10mm Bore
+ $2.49 shipping
/cnc-stepper-motor-drive/zGeizusQ8cZzfHdREkE2ww==/info
eBay
IN_STOCK ( In stock )
We will ship outside the USA on request. See a brief video on how these work http://www.youtube . com/v/uGzWaPYtk1g you are buying one half of a lovejoy coupling with 10 mm bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting buna-N rubber spyder for low noise power transmition, and is super easy to disassemble.To make a complete assembly you will need to buy another Half coupling with the bore size you require, and a hard rubber spyder available i
More

STEPPER MOTOR 14 20MM

$41.19
Sears Marketplace STEPPER MOTOR 14 20MM
No Shipping Info
/stepper-motor-14-20mm/yFL0pUAFytwDuqEYH7QP6w==/info
Sears Marketplace
IN_STOCK ( In stock )
20mm Bipolar NEMA 14 Stepper MotorFor any project that requires precise motor control, stepper motors are where the rubber meets the road. Providing both exacting motion at a variety of speeds, and high holding torque, when not in motion, they are at the heart of most CNC projects.
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy 16mm Bore
+ $3.50 shipping
/cnc-stepper-motor-drive/8UA4uiwhf9bGwFdpO2Jd1Q==/info
eBay
IN_STOCK ( In stock )
you are buying one half of a lovejoy coupling with 16 mm bore. There is a 5x2.5mm notch where the screw is located.
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 3/8 X 1/4& Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/BevVyNgJk4un6fKGt-Pezg==/info
eBay
IN_STOCK ( In stock )
L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 3/8 Bore, and one half 1/4 bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don
More

Cnc Stepper Motor Drive...

$5.50
eBay Cnc Stepper Motor Drive Coupling Half Lovejoy 12mm Bore
+ $2.49 shipping
/cnc-stepper-motor-drive/DRFi697ZefNx7ik2lawHVg==/info
eBay
IN_STOCK ( In stock )
We will ship outside the USA on request. See a brief video on how these work http://www.youtube . com/v/uGzWaPYtk1g you are buying one half of a lovejoy coupling with 12 mm bore. Combined with a coupling spyder, and another Half coupling-- this assembly has a tight fitting buna-N rubber spyder for low noise power transmition, and is super easy to disassemble.To make a complete assembly you will need to buy another Half coupling with the bore size you require, and a hard rubber spyder available i
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 3/8 X 5/16& Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/SY5Wy6djmgEwvUoA0_thEA==/info
eBay
IN_STOCK ( In stock )
L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 3/8 Bore, and one half 5/16 bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You do
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 1/4 X 5/8 & Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/U0Eh5NHjWg6OsrbLciKzbQ==/info
eBay
IN_STOCK ( In stock )
L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 1/4 Bore, and one half 5/8 bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 3/8 X 3/8& Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/UVaArDypHYFZ4DEDL1NvKQ==/info
eBay
IN_STOCK ( In stock )
L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 3/8 Bore, and one half 3/8 bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You don
More

Mach3 Cnc Software Stepper...

$175.00
eBay Mach3 Cnc Software Stepper Motor You Get Disks Free Shp
Free Shipping
/mach3-cnc-software/8RDfLOJRQ9BKzS_Rx6Qzmw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Mach 3 software package Icludes two disks and an install manual disk one includes the Mach3 software lockdown version, and a .pdf file of the manual disk two contains your personalized license data file. -Once you purchase this software, we pay to license and register you with Mach3. We can not get a refund from them so we can not refund you once you purchase and receive your package.Converts a standard PC to a fully featured CNC controller. Up to 6 axis cnc control Allows direct import of DXF
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 1/4 X 5/16& Spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/afTmIXqADdGKJxIbkN52Fw==/info
eBay
IN_STOCK ( In stock )
L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 1/4 Bore, and one half 5/16 bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You do
More

Cnc Stepper Motor Lovejoy...

$11.66
eBay Cnc Stepper Motor Lovejoy Coupling 5/16 X 5/8+spider
+ $3.49 shipping
/cnc-stepper-motor-lovejoy/nD6Kp62hQb3w6D2h5Ue2AQ==/info
eBay
IN_STOCK ( In stock )
L-050 lovejoy 3 piece coupling set-consisting of two halfs and a spider one half is 5/16 Bore, and one half 5/8 bore and the spider is buna N rubber. The spider is tight fitting buna n rubber for low viabration transmittion and very low backlash. You do
More

5 X Miniature Stepper Motors...

$31.95
eBay 5 X Miniature Stepper Motors - 5v - Driver Circuit Schematic
No Shipping Info
/5-x-miniature-stepper/dqBlaTnXXewHeHIl0yAu8Q==/info
eBay
IN_STOCK ( In stock )
5 X Miniature Stepper Motors - 5V with Driver Circuit Schematic Brand new precision miniature stepper motors Manufactured by Symbol Technologies You will receive 5 motors Operates on 5 VDC 2 phase bi-polar / quadrature motor 20 steps per revolution Motor includes a printed copy of a simple driver circuit schematic Driver circuit schematic uses 1 - 74HC86, 1 - 74HC365 and 1 - 4013 integrated circuit and operates at 5 V Knurled shaft dimensions: .3 L x .06 Diameter Motor dimensions (not includi
More

Cnc Stepper Motor & Servo...

$5.99
eBay Cnc Stepper Motor & Servo Motor Belt Sizing Tool For Any Xl Belt To 120 Teeth
+ $2.99 shipping
/cnc-stepper-motor-servo/kV8zbUGAMeYcQq_Ywgwc4A==/info
eBay
IN_STOCK ( In stock )
Brand new product. It is convienent and easy to use to Figure out what XL size belt to use on any pulley system.This tool can measure up to 120 tooth XL belts.Please note that the Demo Pulley System is not part of the tool order, ONLY the specially market cogged belt is the tool. Watch our video to learn more about how easy this tool works. PROBLEMS with the Shipment -- Communicate with us ONLY BY EBAY MESSAGE. DO NOT communicate with the paypal email beginning alice.hubbard, this is an order D
More

Cnc Servo Or Stepper Motor Dr...

$6.49
eBay Cnc Servo Or Stepper Motor Dr Pulley 10t 3/16 .2 P Al
+ $2.59 shipping
/cnc-servo-or-stepper/ccYxAJi6z9OkbR82t0iI_g==/info
eBay
IN_STOCK ( In stock )
WE COMBINE SHIPPING TO LOWEST SHIPPING AND HANDLING ON MULTIPLE ORDERS AND WE SHIP INTERNATIONALLY To Watch a short video of our new CNC item and a sample of what's in our ebay CNC store. Click Here-- http://www.youtube . com/v/cVpuQwudbrg You are buying ONE brand new pulley 10 tooth 0.20 XL pitch all aluminum pulley with 2 flanges, 2 set screws and 3/16 bore. We Can also provide this pulley with Metric BORES of 6 mm and 7 mm for $1 more, contact us. Pitch= 0.200XL two tenths inch pitch. Five te
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

Advertisement
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-23342