Category

Tools and Accessories
Showing results for "cmt 135 welder"
Results 1 - 40 of 1500+

MIG Welder 135 Amp...

$104.99
Eastwood.com MIG Welder 135 Amp Replacement Torch with Plastic Plug
Free Shipping
/mig-welder-135-amp/u8cVcPhWxLf6FminYT5y3g==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
This is a replacement Torch (Gun), with plastic plug, for the Eastwood MIG135. It comes ready to install with a nozzle, contact tip, and liner.
More

Cmt Concentrate Paddle

$10.29
Valley Vet Supply Cmt Concentrate Paddle
+ $7.00 shipping
/cmt-concentrate-paddle/cMhtm7IYfopc-syBWAGcVg==/info
Valley Vet Supply
IN_STOCK ( In stock )
CMT Concentrate Paddle
More

MIG Welder 135 Knurled Drive...

$7.55
Eastwood.com MIG Welder 135 Knurled Drive Roller
+ $6.95 shipping
/mig-welder-135-knurled/kZRmo0Q22brcBf4n-MwKVQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
This drive roller fits the Eastwood MIG135 Welder and is a knurled replacement for the original drive roller. This roller has one V groove side for 0.023 (0.6mm) solid wire and one knurled side for 0.030 (0.8mm) to 0.035 (0.9mm) flux cored wire.
More

MIG Welder 175 Amp Versa-Cut...

$949.99
Eastwood.com MIG Welder 175 Amp Versa-Cut Plasma Cutter 40
+ $77.40 shipping
/mig-welder-175-amp/aXIpcy8a1xOeOR25jTLdIQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa-Cut Plasma Cutter! Click on the individual links below for all the specs, but you must click the Add To Cart button above to get the special savings over individual prices! Eastwood's 220v MIG 175 Welder uses its 175-amp output to handle almost any welding job, and comes with a spool gun for aluminum, stainless and steel. MIG welder welds mild and stainless steel, 24-ga. to 5/16 Welds aluminum, 14-ga. to 1/4 30-175-amp welding range The Eastwood Versa Cut 40 Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8 thick. 110v or 220v AC input with inverter technology 20' torch cable; 10' ground cable with clamp Rated 40-amp output
More

Hobart Outdoor Protective...

$129.99
Northern Tool Hobart Outdoor Protective Welder Cover - Model 770714
+ $7.99 shipping
/hobart-outdoor-protective/Oe5J4QeXEXgIMW3DIMgOaw==/info
Northern Tool
IN_STOCK ( In stock )
This Hobart outdoor waterproof welder cover resists stains and mildew, while protecting the finish and internal components of your welder. Designed to fit the Hobart Champion Elite 23 HP Welder/Generator Item #26167, sold separately. U.S.A. Product Type Cover/case. Fits with or without handle and wheel kit installed. Model Number: 770748
More

MIG Welder 250 Amps

$899.99
Eastwood.com MIG Welder 250 Amps
+ $43.20 shipping
/mig-welder-250-amps/mShr4T2NvTsokpZfgejkag==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Powerful, lightweight 250 amp MIG welder at a DIY friendly price Eastwood designed this 250 amp MIG welder from the ground up to be powerful, easy to use, and inexpensive. With its state of the art inverter technology, it weighs1/2 as much as similar welders and costs1/2 as much too. But it still delivers all the power you will ever need to weld steel from 20ga to 1/2 inch thick and aluminum from 14ga to 1/4 thick, with a 60% duty cycle at its full 250 amp setting. Plus, with the efficiency of the inverter and the ability to run on 120v or 240v, you can easily take it to the race track or job site and run it off a generator. It also has infinite adjustability of both its voltage and wire feed speed settings, can take both 4 inch and 8 inch diameter spools, and feed steel, stainless or... Less
More

Buffalo Tools Pro Series 120V...

$113.59
Walmart.com Buffalo Tools Pro Series 120V Arc Welder 70A
Free Shipping
/buffalo-tools-pro-series/yoT7nlUOrNWwZVubHMSHHw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Pro-Series 120-Volt Arc Welder is ideal for doing quick, down and dirty repairs and maintenance in the auto shop, farm or home garage. This is a great welder to have on hand for all general purpose welding or for trying your hand at welding for the first time. A duty cycle of 20 percent at 50A means this Arc Welder will weld continuously for two minutes when set to 50 amps before needing to cool down. Welds mild steel up to 1/8-inch in a single pass. Includes nine-foot welding cable and electrode holder and a six-foot ground cable and earth clamp, clipping hammer/brush and welding face shield.
More

MILWAUKEE 49224076 Welders...

$126.00
Zoro MILWAUKEE 49224076 Welders Hole Saw Kit, 8 Pcs.
Free Shipping
/milwaukee-49224076/POmqIGW5Y3_-es3GDIdOWQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Free Shipping
Welders Hole Saw Kit, Number of Pieces 8, Tooth Material High Speed Steel, Arbor Design Included, Range of Saw Sizes 3/4 In. to 2 In., Saw Sizes Included 3/4 In., 7/8 In., 1 In., 11/4 In., 11/2 In. and 2 In., Max. Cutting Depth 15/8 In., Mild Steel, Stainless Steel, Nail Embedded Wood, Plastic, Duct, Pipe, Tube, Nonferrous Metals, Teeth per Inch 4/5, Pitch Style Variable Pitch, Thread Size 1/220 and 5/818, Replacement Arbor No. Mfr. No. 49567010 or 49567250, Shank Size 3/8 In. Hex
More

MIG Welder 135 Amp Drive...

$6.47
Eastwood.com MIG Welder 135 Amp Drive Roller
+ $6.95 shipping
/mig-welder-135-amp-drive/PiJeqAvMncsvDH__mvQX-Q==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Replacement drive roller for the Mig 135 (12011). This would be utilized if the original drive roller is damaged or the set screw threads are damaged.
More

Hobart Handler 140 Wire...

$499.99
Sears Hobart Handler 140 Wire Feeder Welder Package
Free Shipping
/hobart-handler-140-wire/ifVls0_6Iesl21RJ2o-GvQ==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Get it Together with the Wire Feed Welder Package A smooth feeding, powerful welder, this Hobart handler 140 wire feed welder package delivers smooth seam welds, fast fillets and strong rosettes. Using common shop and household 110 volt current, it s adjustable between 5 arc power settings with 100 points of feed speed adjustment, so you can fine tune your flow for the smoothest, strongest wire weld possible. Packing everything you need to get started, this wire feed welder package is enough to get you ready to repair cracked frames, tools, automotive parts and even fabricate your own equipment from scrap. A performance regulator feeds shielding gas with precision, while the ergonomic handle design delivers a level of control and comfort that makes every arc count. A solid tool that s... Less
More

Lincoln Electric Welding...

$269.00
Home Depot Lincoln Electric Welding Tools Weld Pack HD Feed Welder K2188-1
Free Shipping
/lincoln-electric-welding/TItFohAKU_A8oBlROBVTLw==/info
Home Depot
IN_STOCK ( In stock )
Free Shipping
Shop for Tools & Hardware at The Home Depot. Take a look around your home workshop and you'll find dozens of reasons to pick up this reliable, well-built Lincoln Electric welder. With four output ranges, the Weld-Pak HD is one of the most versatile machines in its class. We've included virtually everything you'll need to weld mild steel with gasless, flux-cored wire electrode gun and cable assembly, work clamp and cable, welding hand shield, chipping hammer/brush, even a spool of our self-shielded flux-cored wire.
More

Cmt Cmt806. 127. 11 . 50 inch...

$17.96
Walmart.com Cmt Cmt806. 127. 11 . 50 inch Dia Flush Trim Bit
+ $8.14 shipping
/cmt-cmt806-127-11-50/Cvh01zwM7ZWkxWuA67obgw==/info
Walmart.com
IN_STOCK ( In stock )
To trim even the most difficult projects, CMT has designed a series of truly indispensible bits- CMT Flush Trim bits are available in a wide range of sizes that are sure to satisfy any woodworking need- Use these carbide faced bits for precision work on laminates or for quick template work with excellent finish results- Ball bearing guide- Cut Diameter: 1/2''- Cut Length / Outside Diameter: 1''- Shank Diameter: 1/4''- SKU: HDSRBR4210
More

Stud Welder Dent Pulling...

$259.99
Eastwood.com Stud Welder Dent Pulling System
Free Shipping
/stud-welder-dent-pulling/BX8zwOYFar46FikexXAxPQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Stud Welder Dent-Pulling System makes a hole-free dent repair, so it won’t weaken the panel, and needs less filler 3-step repair works without drilling holes, so it won't compromise the strength of the panel. The result is a professional- looking dent repair that requires minimal filler. Stud welder spot-welds pins onto the dented metal surface Pull the pins to pull-out the dent Snip the pins, then grind the rest down
More

CMT 815.095.11 V Grooving...

$15.36
Zoro CMT 815.095.11 V Grooving Router Bit, HW, 3/8 in
+ $5.00 shipping
/cmt-81509511-v-grooving/oHQp3KK896uFT-qS41EoxQ==/info
Zoro
IN_STOCK ( In stock )
Store not rated
V Grooving Router Bit, HW, Cutting Dia. (In.) 3/8, Depth of Cut (In.) 1/2, Flute Length (In.) 1/2, Number of Flutes 2, Cutting Length (In.) 1/290 Degrees Angle, Shank Dia. (In.) 1/4Overall Length (In.) 13/7Routing
More

Eastwood TIG Welder, Plasma...

$1,219.99
Eastwood.com Eastwood TIG Welder, Plasma Cutter & Cart Kit
+ $85.80 shipping
/eastwood-tig-welder/EMTnWx9QBaKyvF_4Z-mFVA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut Plasma Cutter, and organize it all on the Cart included! Click on the individual links below for all the specs, but you must click the Add To Cart button below to get the special savings over individual prices! Eastwood- engineered TIG 200 AC/DC Welder offers professional- quality TIG welding at an affordable price! This exceptional TIG welder operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit 1/4-thick welding capacity High-frequency start for precise arc control Square-wave inverter for accurate aluminum welding The Eastwood Versa Cut Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8 thick. 110v or 220v AC input with inverter... Less
More

Super Pro Plus Stud Welder

$399.99
Eastwood.com Super Pro Plus Stud Welder
Free Shipping
/super-pro-plus-stud-welder/MunMf4zlNfjzoT3R9nHIYA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Powerful 2,000-amp Stud Welder makes this Super Pro Plus Dent-Pulling System perfect for most any body repair job You'll use this professional system to repair most dents, pull creases, weld trim rivets, and shrink metal, and the robust 2,000-amp stud welder gun helps you get it done fast. 4 electrodes, for stud, Magna Wire, rivet welding, shrinking 2 sizes of draw pins, for light- and heavy-gauge work Includes twist-on/off slide hammer and T hand puller Do you have a product idea? Click Here to suggest it!
More

Campbell Hausfeld Wheel Kit...

$139.99
Northern Tool Campbell Hausfeld Wheel Kit for Generator/Welder Item 164091, Model GW003100AJ
+ $10.99 shipping
/campbell-hausfeld-wheel/bw5njjjdmaQbxmPIpG3ecg==/info
Northern Tool
IN_STOCK ( In stock )
Campbell Hausfeld wheel/handle kit for the Generator/Welder item# 164091. Allows safe and easy installation for convenient transportation of the Gen/Welder. Includes two wheels, 1 axle, 1 handle and 1 parts kit. Compatible With Item Number s 164091, Wheels qty. 2.. Model Number: GW003100AJ
More

Pro Stinger Stud Welder kit...

$499.99
Eastwood.com Pro Stinger Stud Welder kit with 9-finger claw puller
Free Shipping
/pro-stinger-stud-welder/pBryGl3g5p_4LQ2pKAqAlw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Stinger-Plus 5500 Kit...one of the finest Stud Welders used across the industry Collision shops use pro-grade stud welder kits like this every day for repair of body dents or dings without drilling. Just weld the stud onto the dented panel, pull the dent out, then snip or grind the stud off. Stinger-Plus 5500 Stud Welder was tested on 2 million welds Stud-Ease technology for easy 1-handed operation Includes Deluxe Slide Hammer, 9-Claw Wire Puller, Mini-Puller, and more
More

CMT 818.130.11 Dovetail...

$12.83
Zoro CMT 818.130.11 Dovetail Router Bit, HW, 1/2 in
+ $5.00 shipping
/cmt-81813011-dovetail/FjFAtZuYWWW-D3VsWirv8w==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Dovetail Router Bit, HW, Cutting Dia. (In.) 1/2, Depth of Cut (In.) 1/2, Flute Length (In.) 1/2, Number of Flutes 2, Cutting Length (In.) 1/214 Degrees Angle, Shank Dia. (In.) 1/4Overall Length (In.) 13/7Routing
More

CMT 839.254.11 Beading Router...

$22.85
Zoro CMT 839.254.11 Beading Router Bit, HW, 1 in
+ $5.00 shipping
/cmt-83925411-beading/ISbxhmXE1nF5i_e9YoHwLg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Beading Router Bit, HW, Cutting Dia. (In.) 1, Depth of Cut (In.) 1/2, Flute Length (In.) 1/2, Number of Flutes 2, Cutting Length (In.) 1/2, Radius (In.) 1/4Shank Dia. (In.) 1/4Overall Length (In.) 13/7Routing
More

MIG Welders Pliers

$8.79
Eastwood.com MIG Welders Pliers
+ $6.95 shipping
/mig-welders-pliers/MkKO9IaLBLjKxRa7iR0sTQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
MIG Welder's Pliers make your welding tasks a whole lot easier Unlike typical pliers, these pliers are designed to help you through those specialized MIG welding tasks. Squared-off, spring-loaded tips remove spatter Knurled surfaces hold tips and nozzles for installation Built-in wire cutter Comfortable rubberized handle
More

Cmt Cmt811. 682. 11 23-32...

$26.63
Walmart.com Cmt Cmt811. 682. 11 23-32 inch Dia Plywood Groove Bit
+ $9.74 shipping
/cmt-cmt811-682-11-2332/EE5QDdRD30YkRCMXcMrPbg==/info
Walmart.com
IN_STOCK ( In stock )
Razor-sharp, double-faced cutters perfectly synthesize the characteristics and advantages that define quality CMT products- Made of special Fatigue Proof+ steel and micrograin carbide- CMT straight bits can withstand even the heaviest work load and still give you a smooth, precise cut every time- Exceptional chip ejection to allow cleaner and more constant cutting- All CMT bits are protected with their trademark orange non-stick PTFE to help keep the bit from collecting resin, pitch and other residue- Every bit is submitted to strict quality tests to guarantee perfect cutting tolerance, balance and concentricity- Cut Diameter: 23/32''- Cut Length / Outside Diameter: 1''- Shank Diameter: 1/2''- SKU: HDSRBR4241
More

Smarter Tools 120-Volt MIG...

$429.00
Lowe's Smarter Tools 120-Volt MIG Flux-Cored Wire Feed Welder STWD-MIG-135KIT
+ $79.00 shipping
/smarter-tools-120volt/dB5ZMo6jzwaObZg7u5T3lQ==/info
Lowe's
IN_STOCK ( In stock )
Step-less wire speed control means more reliable welds. Thermal overload protection ensures lasting performance for years to come. Multiple voltage settings for a variety of materials.
More

CMT 8-in 12-Tooth Dado...

$89.98
Lowe's CMT 8-in 12-Tooth Dado Circular Saw Blade Set P08012
+ $5.99 shipping
/cmt-8in-12tooth-dado/uQyovyMjmqvR9peJgce0TA==/info
Lowe's
IN_STOCK ( In stock )
Non-stick PTFE coating - this baked on non-stick PTFE coating reduces friction and heat build-up and allows the blade to cut smoother avoid corrosion. Finest industrial quality micro-grain carbide CMT puts the finest quality at the cutting edge produced by Luxembourgs Cerametal CMTs carbide tips a. Anti-kickback design - the special design virtually eliminates the danger of kickback creating a safer and more efficient work environment.
More

CMT 10-in Continuous Carbide...

$38.28
Lowe's CMT 10-in Continuous Carbide Tooth Circular Saw Blade P10050
+ $5.99 shipping
/cmt-10in-continuous/o0oONCSuHA_dSQ-ZfNUdcw==/info
Lowe's
IN_STOCK ( In stock )
Non-stick PTFE coating - this baked on non-stick PTFE coating reduces friction and heat build up and allows the blade to cut smoother avoid corrosion. Finest industrial quality micrograin carbide CMT puts the finest quality at the cutting edge-produced by Luxembourgs Cerametal CMTs carbide tips ar. Anti-kickback design - the special design virtually eliminates the danger of kickback creating a safer and more efficient work environment.
More

Eastwood MIG Welder 175 Amp...

$499.99
Eastwood.com Eastwood MIG Welder 175 Amp with Spool Gun
+ $54.60 shipping
/eastwood-mig-welder-175/RAjWJhhB4DzDywiUaGUI1w==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Eastwood's MIG 175 Welder: high-end features at a DIY price! As a professional or weekend enthusiast, you can now get industrial- quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive other MIG welders for sale! Welds mild and stainless steel, 24-ga. to 5/16 Welds aluminum, 14-ga. to 1/4 with included FREE spool gun ($199.99 value!) 30-175-amp welding range Ships with regulator and hose for optimum MIG welding. Can also be used for Flux-Core welding. Powered by 220v current Compare to similar welders that sell for over $700 ETL Approved Backed by Eastwood's no-hassle return policy and 3-year warranty... Less
More

Unispotter Deluxe 9000 Stud...

$549.99
Eastwood.com Unispotter Deluxe 9000 Stud Welder
+ $19.41 shipping
/unispotter-deluxe-9000/ZtA0NjEtsfMMCerVTtgC6w==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Uni-Spotter 9000 Deluxe Stud Welder Kit is built to be the best stud welder for the bodywork professional The 9000 Deluxe has the most powerful transformer on the market and will keep operating efficiently in all kinds of high-demand situations, such as multiple users or a low-voltage source at the end of a long extension cord. Exclusive Stud-Ease Technology holds studs tight Transformer tested to produce 10 million welds Includes 2.2mm and 2.6mm copper-coated studs, body side molding rivets See below for complete kit contents
More

Deluxe Stud Welder...

$369.99
Eastwood.com Deluxe Stud Welder Dent-Pulling System
Free Shipping
/deluxe-stud-welder/zt3u-PLhiroRrjo-7b_RKw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
Heavy-Duty Quality Dent-Pulling System. This unit utilizes a wider range of draw pins for greater versatility. Includes heavy-duty Magna Spot 1500 stud welding gun, heavy-duty twist-to-lock slide hammer, 3 electrodes, 500 2mm draw pins, 150 trim rivets, and a convenient molded carrying case. 5-year manufacturer's warranty.
More

MIG Welder Gas Regulator

$31.49
Eastwood.com MIG Welder Gas Regulator
+ $10.95 shipping
/mig-welder-gas-regulator/mu00Up0Vfy8RlFxn3c_N_A==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Dual-gauge CO2, Argon regulator for Eastwood MIG 135 (12011) and MIG 175 (12012).
More

CRESCENT CMT1000 ODD JOB...

$23.49
Walmart.com CRESCENT CMT1000 ODD JOB 11-IN-1 MULTI-TOOL
+ $3.99 shipping
/crescent-cmt1000-odd-job/_nTxycMsoGB1TbhXk-w1lQ==/info
Walmart.com
IN_STOCK ( In stock )
The Odd Job 11-in-1 Multi-Tool from Crescent(R) includes a steel hammer with heft for driving in small nails, tacks and dowels with a nail puller to remove old nails and a soft-faced mallet for tapping without marring or breaking. The fine-toothed reversible ratcheting bit driver tightens and loosens screws quickly and easily while the flexible driver shaft bends to reach into tight corners. Six bits are stored in handle. And the magnetically retained and removable utility knife opens boxes and breaks them down with ease
More

CMT 809.025.11 Trimmer Router...

$17.87
Zoro CMT 809.025.11 Trimmer Router Bit, HW, 3/4 in
+ $5.00 shipping
/cmt-80902511-trimmer/-oS3nyYQmyj5d0Muf0biAw==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Trimmer Router Bit, HW, Cutting Dia. (In.) 3/4, Depth of Cut (In.) 13/32, Flute Length (In.) 13/32, Number of Flutes 2, Cutting Length (In.) 13/3225 Degrees Angle, Shank Dia. (In.) 1/4Overall Length (In.) 13/7Routing
More

CMT 801.317.11 Mortise Router...

$18.92
Zoro CMT 801.317.11 Mortise Router Bit, HW, 11/4 in
+ $5.00 shipping
/cmt-80131711-mortise/PXDjEUXbEu07ApGF2jo9Kg==/info
Zoro
IN_STOCK ( In stock )
Store not rated
Mortise Router Bit, HW, Cutting Dia. (In.) 11/4, Depth of Cut (In.) 1/2, Flute Length (In.) 1/2, Number of Flutes 2, Cutting Length (In.) 1/2Shank Dia. (In.) 1/4Overall Length (In.) 13/7Routing
More

Lincoln Electric Outback 25V...

$3,619.99
Walmart.com Lincoln Electric Outback 25V Engine Driven MIG Welder 185A
Free Shipping
/lincoln-electric-outback/qnIcsR8dpTQy8TLZOnnUGQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
LCL1563 Features Outback 185 engine driven welder More leverage for lifting unit on and off truck beds Extra protection against product damage Easy access for starting, especially when mounted on truck beds Product Type: Mig welders/Engine driven Duty Cycle Percentage: 60pct Duty Cycle Percentage: 20pct Maximum Voltage: 25 Output Amperage: 185 Generic Specifications Up to 185 amps of DC output for many applications Rated output: 130A DC/25V/60pct, 150A DC/25V/20pct Generic Dimensions 25.5'' H x 21.1'' W x 31.5'' D, 275 lbs Dimensions Overall Height - Top to Bottom: 25.5 Overall Width - Side to Side: 21.1 Overall Depth - Front to Back: 31.5 Overall Product Weight: 275
More

Crescent Cmt1000 Odd Job...

$21.75
Walmart.com Crescent Cmt1000 Odd Job 11-in-1 Multi-tool
+ $8.19 shipping
/crescent-cmt1000-odd-job/aZIfGuq5lXClGOsLmLgASg==/info
Walmart.com
IN_STOCK ( In stock )
Multi-tool includes: Steel hammer with heft drives in small nails, tacks & dowels Nail puller removes old nails Soft-faced mallet taps without marring or breaking Fine-toothed reversible & flexible ratcheting bit driver tightens & loosens screws quickly & easily 6 screwdriver bits in handle--Phillips(R ), slotted & hex Magnetically retained & removable utility knife opens boxes & breaks them down with ease
More

H & S Autoshot Stud Welder...

$459.99
CPO Outlets H & S Autoshot Stud Welder Kit with Stud Ease Technology 9000 Uni-Spotter Deluxe
Free Shipping
/h-s-autoshot-stud/BhB4SIS2RgGkVJ3jZa3hyQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
Deluxe Stud Welder - 9190. 2.2mm Flexpert Welding Studs - 1001. 2.6mm Heavy-Weight Studs - 1002. Body Side Molding Rivets - 1003. Stud Welding Tip - 1004. Molding Rivet Welding Tip - 1005. Shrink Welding Tip - 1007. Deluxe Slide Hammer - 1016. Eliminator Side-by-Side Adapter with Stud Ease - 1045. Mini Pull'r - 1095. Custom Molded Tool Box - 9129. Exclusive Stud Ease technology ensures the welding stud doesn't fall out of the welder. Assorted welding tips to handle a variety of stud welding tasks. Most powerful transformer on the market ensures consistent power and performance. Convenient molded storage case keeps parts and accessories organized during and after use
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Most Popular In Tools and Accessories

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe142.sp10-27355