Category

Boating and Sailing Ac...
Showing results for "cmc hydraulic actuator"
Results 1 - 40 of 482

Cmc High Speed Hydraulic...

$1,089.99
eBay Cmc High Speed Hydraulic Power-lift Transom Jack With Gauge
+ $9.99 shipping
/cmc-high-speed-hydraulic/7u_6ZOG_fEKbFMSMQZSBfQ==/info
eBay
IN_STOCK ( In stock )
wakezonemarine Store (Pictures are stock photo and item may vary stightly)Cmc High Speed Hydraulic Power-Lift Transom Jack With Gauge JACK PLATE HIGH SPEED POWER-LIFT (T-H MARINE) This powerful unit will handle anything up to a V-6 300hp motor at full throttle at a full stroke speed of only 8 seconds, twice as fast as some other units! The hydraulic actuator is inside the structure, yet is fully accessible without removing the engine and there are no hoses and no remote hydraulic pump to mount
More

Cmc High Speed Hydraulic...

$899.99
eBay Cmc High Speed Hydraulic Power-lift Transom Jack W/o Gauge
+ $9.99 shipping
/cmc-high-speed-hydraulic/XUC5B0D9bQDPEp97Oz-cWQ==/info
eBay
IN_STOCK ( In stock )
(Pictures are stock photo and item may vary stightly)Cmc High Speed Hydraulic Power-Lift Transom Jack W/O Gauge JACK PLATE HIGH SPEED POWER-LIFT (T-H MARINE) This powerful unit will handle anything up to a V-6 300hp motor at full throttle at a full stroke speed of only 8 seconds, twice as fast as some other units! The hydraulic actuator is inside the structure, yet is fully accessible without removing the engine and there are no hoses and no remote hydraulic pump to mount in the boat. The paten
More

Jack Plate Hydraulic High...

$1,069.95
eBay Jack Plate Hydraulic High Speed Cmc 119- 65001
+ $34.40 shipping
/jack-plate-hydraulic-high/C4ElIHyAnyuaEwHIJ_gBOw==/info
eBay
IN_STOCK ( In stock )
By far one of the finest Jack plates on the market!Why:1. The highest quality materials 2. Fast transit speed 3. No boat mounted pump (saves space)4. No hydraulic lines (self contained unit)HYDRAULIC JACK PLATE Hydraulic Jack plate 119- 65001 -LNS, MSRP (List) $ 1309.49 Hardware Gauge included Features:3/4 1/2 6061 T6 Aluminum Stainless steel fasteners No welds or castings 4417 pounds of thrust V6 300 HP max Hydraulic actuator mounted inside Pump is mounted on actuator - not in boat Permanent
More

Cmc Pt-35 Tilt And Trim...

$488.99
eBay Cmc Pt-35 Tilt And Trim Plate, In Box
+ $31.81 shipping
/cmc-pt35-tilt-and-trim/AC61AbYUunPietHZKItjHA==/info
eBay
IN_STOCK ( In stock )
PT-35 Power Tilt Trim (Item #52100) Rated for 35 H.P. and Smaller Motors. • 5 1/2 Set Back to Enhance Boat Stability and Performance. • 84° of Trim and Tilt. • 1/4 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter. • Weighs Only 24 Pounds! Comes with all necessary wiring and switch to install. Thanks for looking! We do NOT ACCEP
More

Cmc Pt-130 Tilt And Trim...

$579.99
eBay Cmc Pt-130 Tilt And Trim Plate, In Box, W/o Gauge
+ $35.97 shipping
/cmc-pt130-tilt-and-trim/48o3H8ivHEciV8lNal8xcA==/info
eBay
IN_STOCK ( In stock )
PT-130 Power Tilt Trim (Item #13002) PT-130 FEATURES: • Rated for 130 H.P. and Smaller Motors. • 6 Set Back to Enhance Boat Stability and Performance. • 20° of Trim and a Total of 90° of Tilt and Trim. • 1/2 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Standard B.I.A. Bolt Hole Pattern. • Four Stainless Steel Motor Mounting Bolts Included, as well as the wiring harness, relays, and switch.
More

CMC PT-35 Electric Hydraulic...

$663.99
Sears CMC PT-35 Electric Hydraulic Tilt & Trim 52100
No Shipping Info
/cmc-pt35-electric/9eTi7bouJdh95R6ePAp8cQ==/info
Sears
IN_STOCK ( In stock )
CMC PT-35 Electric Hydraulic Tilt & Trim 52100
More

CMC PT-35 Tilt and Trim ...

$594.99
Bass Pro Shops CMC PT-35 Tilt and Trim 16087
+ $26.95 shipping
/cmc-pt35-tilt-and-trim/H3PEffkNLNN53nyCWbV4IA==/info
Bass Pro Shops
IN_STOCK ( In stock )
Designed for up to 35 hp motors Accommodates clamp-on or bolt-on motors without an adapter 11-1/2inch wide with a 5-1/2inch setback Weight: 24 lbs. Customers have asked for a smaller version of the PT-130 and here it is! This is designed for 35 HP and smaller motors. This unit is 11-1/2inch wide with 5-1/2inch setback and only weighs 24 lbs. It utilizes the same hydraulic actuator and will accommodate clamp-on or bolt-on motors without an adapter. This saves you time and money!
More

Cmc Pl-65 Hs Hydraulic Jack...

$864.99
eBay Cmc Pl-65 Hs Hydraulic Jack Plate, In Box W/ Gauge
+ $40.03 shipping
/cmc-pl65-hs-hydraulic/vK7XQj38ilAeS5x4yTk4Tg==/info
eBay
IN_STOCK ( In stock )
This is the Hi Speed model. Make sure to compare features when looking. We do not sell the older, slower version of these jackplates. Don't be fooled!! PL-65 HS 5-1/2 Set-Back High Speed Hyd Jack Plate (Item #65302) ***NEW*** Features Of Patented Hydraulic High Speed Power-Lift® Full Stroke in 8 seconds! (U.S. Patent 4,482,330) 1. Made of 3/4 and 1/2 inch 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners. Ideal for fresh or salt water use. No welds or castings to b
More

CMC Power Tilt and Trim

$99.99
Cabela's CMC Power Tilt and Trim
+ $12.95 shipping
/cmc-power-tilt-and-trim/X3nIT5LP-DdexRLQX_YyIw==/info
Cabela's
IN_STOCK ( In stock )
Rated at more than 7,800 lbs. of thrust, this is the most powerful power trim unit you can put on your boat. Constructed of 1/2, 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. The hydraulic motor with 12-volt DC power unit and pump assembly is completely self-contained with its own fluid reservoir, eliminating the need for a hydraulic tank inside the boat. Rated for 130 hp and smaller motors, the PT-130 will trim the motor 20 and has a total of 65 trim and tilt. Incorporates a 6 setback, which enhances boat stability and puts the prop in cleaner water, eliminating prop slippage and increasing top-end speed and fuel efficiency. 5-year structure warranty. 1-year hydraulic pump warranty... Less
More

Cmc Pl-65 Hydraulic Outboard...

$810.00
eBay Cmc Pl-65 Hydraulic Outboard Power Lift 5.5
+ $25.00 shipping
/cmc-pl65-hydraulic/UjyDkyr_T6WX5cnJ1rI5Fg==/info
eBay
IN_STOCK ( In stock )
This listing is for brand new CMC hydraulic outboard power lift. Model PL-65. 5 1/2 set-back. Rated for V6 and smaller motors. Provides 5 of vertical travel. 1.5 inches of adjustment on the transom and motor brackets. Gauge not included. Mounting hardware included. In order for your outboard engine to perform at its full potential and efficiency, it should be adjusted to different heights for different speeds, waer conditions, and varying loads in your boat. This CMC power lift will position
More

Cmc Pl-65 Hs Hydraulic...

$890.00
eBay Cmc Pl-65 Hs Hydraulic Outboard Power Lift 5.5
+ $25.00 shipping
/cmc-pl65-hs-hydraulic/9Dl8NulD4lqk96PkjgNeMw==/info
eBay
IN_STOCK ( In stock )
This listing is for brand new CMC hydraulic outboard power lift. Model PL-65 High Speed. 5 1/2 set-back. Rated for V6 300 HP and smaller motors. Provides 5 of vertical travel 1.5 inches of adjustment on the transom and motor brackets. Gauge not included. Will raise a 300 HP V6 motor up in approximatly 8 seconds which is almost twice as fast as the normal PL-65 Power Lift. Ideal for boaters who want a jack plate for high speed positioning of their motor. In order for your outboard engine to pe
More

CMC Power Tilt and Trim

$629.99
Cabela's CMC Power Tilt and Trim
+ $27.95 shipping
/cmc-power-tilt-and-trim/A4XfTqU4mRmgO21anlADnw==/info
Cabela's
IN_STOCK ( In stock )
Rated at more than 7,800 lbs. of thrust, this is the most powerful power trim unit you can put on your boat. Constructed of 1/2, 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. The hydraulic motor with 12-volt DC power unit and pump assembly is completely self-contained with its own fluid reservoir, eliminating the need for a hydraulic tank inside the boat. Rated for 130 hp and smaller motors, the PT-130 will trim the motor 20 and has a total of 65 trim and tilt. Incorporates a 6 setback, which enhances boat stability and puts the prop in cleaner water, eliminating prop slippage and increasing top-end speed and fuel efficiency. 5-year structure warranty. 1-year hydraulic pump warranty... Less
More

CMC Power Tilt and Trim

$749.99
Cabela's CMC Power Tilt and Trim
+ $27.95 shipping
/cmc-power-tilt-and-trim/8UYaCGlEYz5vwJLFT-LWoQ==/info
Cabela's
IN_STOCK ( In stock )
Rated at more than 7,800 lbs. of thrust, this is the most powerful power trim unit you can put on your boat. Constructed of 1/2, 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. The hydraulic motor with 12-volt DC power unit and pump assembly is completely self-contained with its own fluid reservoir, eliminating the need for a hydraulic tank inside the boat. Rated for 130 hp and smaller motors, the PT-130 will trim the motor 20 and has a total of 65 trim and tilt. Incorporates a 6 setback, which enhances boat stability and puts the prop in cleaner water, eliminating prop slippage and increasing top-end speed and fuel efficiency. 5-year structure warranty. 1-year hydraulic pump warranty... Less
More

Th Marine Cmc Pt-35 Electric...

$546.88
Wholesale Marine Th Marine Cmc Pt-35 Electric Hydraulic Tilt And Trim
Free Shipping
/th-marine-cmc-pt35/WEoKwl1Ri_oLMq9NEllaDQ==/info
Wholesale Marine
IN_STOCK ( In stock )
Store not rated
Free Shipping
CMC PT-35 Electric Hydraulic Tilt and Trim Features: Rated for 35 HP and Smaller Motors. 5-1/2 Set Back to Enhance Boat Stability and Performance. 84 Degrees of Trim and Tilt. 1/4 6061-T6 Extruded Aluminum Construction with Stainless Steel Fasteners. El
More

Cmc Pl-65 Hs Hydraulic Jack...

$729.99
eBay Cmc Pl-65 Hs Hydraulic Jack Plate, In Box W/o Gauge Hs (high Speed) Model
+ $38.27 shipping
/cmc-pl65-hs-hydraulic/Jou2Ur69DEY3_VWhHNZ6rg==/info
eBay
IN_STOCK ( In stock )
This is the Hi Speed model. Make sure to compare features when looking. We do not sell the older, slower version of these jackplates. Don't be fooled!! PL-65 HS 5-1/2 Set-Back High Speed Hyd Jack Plate (Item #65302) ***NEW*** Features Of Patented Hydraulic High Speed Power-Lift® Full Stroke in 8 seconds! (U.S. Patent 4,482,330) 1. Made of 3/4 and 1/2 inch 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners. Ideal for fresh or salt water use. No welds or castings to b
More

Electric/hydraul ic Transom...

$990.00
eBay Electric/hydraul ic Transom Jack
Free Shipping
/electrichydraulic/5uHx9FhKMd3TrU04lE8Ang==/info
eBay
IN_STOCK ( In stock )
Free Shipping
PL65 Electric/Hydrauli c Transom Jack This unit is powered by a self contained hydraulic actuator with its own fluid reservoir which eliminates the need for a hydraulic tank and hoses inside the boat for easy rigging. All models come standard with 5.5 of set back and a 5 year structural warranty and a 1 year Hydraulic System Warranty. (All Warranties handled factory direct with CMC).
More

COOK MANUFACTURING CORP. CMC...

$1,062.00
Walmart.com COOK MANUFACTURING CORP. CMC Electric Hydraulic Transom Jacks
Free Shipping
/cook-manufacturing-corp/3EFrBreT_sgAlOYQeoPHoA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
More

Cmc Pt35 Pt-35 Boat Engine...

$549.00
eBay Cmc Pt35 Pt-35 Boat Engine Tilt & Trim Part 52100 Tilt Trim Authorized Dealer
+ $39.95 shipping
/cmc-pt35-pt35-boat/iFnuv6egaZVfVCgY9a2h-Q==/info
eBay
IN_STOCK ( In stock )
CMC PT-35 Tilt Trim A USED CMC PT-35 IS NO BARGAIN AT ANY PRICE - OURS ARE NEW WITH FULL WARRANTY CMC PT-35 Power Tilt Trim Part # 52100 MAX 35HP Boat Owners World is an Authorized CMC Dealer FULL MFG WARRANTY WE HAVE BEEN SELLING CMC PRODUCTS FOR 14 YEARS NEW - NO OPEN BOXES IMPORTANT There will be major delays due to the cold weather and heavy snowfall .MORE THAN 900 UNITS SOLD!CMC PT-35 Tilt and Trim 52100 Electric Hydraulic Tilt Trim You Get Power Tilt Trim, Better Boat Handling, More Speed
More

Cmc Pt130 Pt-130 Boat Engine...

$599.95
eBay Cmc Pt130 Pt-130 Boat Engine Tilt & Trim 13002 No Gauge Max 130hp
+ $38.95 shipping
/cmc-pt130-pt130-boat/dM_X-vHGV0XnDI-GOfj_Bw==/info
eBay
IN_STOCK ( In stock )
CMC PT-130 Tilt Trim CMC PT-130 Power Tilt Trim Part # 13002 NO GAUGE Boat Owners World is an Authorized CMC Dealer FULL MFG WARRANTY WE HAVE BEEN SELLING CMC PRODUCTS FOR 14 YEARS NO OPEN BOXES - THIS IS BRAND NEW NOT A RETURN - NOT A REBUILT UNIT IMPORTANT There will be major delays due to the cold weather and heavy snowfall MORE THAN 300 UNITS SOLD! 90 Degrees Of Tilt And Trim !Experience Convenience Improved Performance The CMC PT-130 Tilt Trim incorporates a 6 setback which enhances Boat
More

T-h Marine Jackplate-atlas...

$1,099.99
eBay T-h Marine Jackplate-atlas Hydraulic 12 300
+ $56.24 shipping
/th-marine/8_KlzFh49HBZdrIrXCVyGg==/info
eBay
IN_STOCK ( In stock )
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE MOUNTING BOLTS NOT INCLUDED - ATLAS™ is truly the best hydraulic jack plate in the world - ATLAS™ is factory installed by more boat manufacturers than any other plate - ATLAS™ is used by more Professional fisherman than any other hydraulic jack plate - ATLAS™ hydraulic actuator is made in the U.S.A., our competition's is from China - T-H Marine/CMC pioneered hydraulic jack plates with the actuator inside the plate, the compet
More

Cmc Static Jack Plates – 5”...

$125.00
eBay Cmc Static Jack Plates – 5” Vertical Extension
+ $19.15 shipping
/cmc-static-jack-plates/kwV2iRAOaPl_ItehY_fF3g==/info
eBay
IN_STOCK ( In stock )
This listing is for the CMC 5 INCH VERTICAL EXTENSION The 5 INCH VERTICAL EXTENSION allows the motor to be mounted 5 inches higher than the standard mounting height on the transom. It is a must for conversion from prop to jet drive. Another application includes mounting the 5 inch vertical extension on a hydraulic jack plate to raise the motor higher on shallow running boats that are equipped with tunnel extensions. Constructed of Extruded 6061-T6 Aluminum alloy.
More

CMC PL-65 Electric Hydraulic...

$964.99
Bass Pro Shops CMC PL-65 Electric Hydraulic Transom Jack Plate 1146
+ $36.95 shipping
/cmc-pl65-electric/fTeNRatvSwuvL-22uf5tYA==/info
Bass Pro Shops
IN_STOCK ( In stock )
Set optimum motor height throughout all speeds Self-contained, waterproof hydraulic unit Heavy-duty extruded aluminum mounting bracket 5inch of vertical travel Provides quicker starts, better prop clearance, increased speed and reduced fuel consumption With this powerful transom jack, one switch lets you easily set optimum motor height throughout all speeds. This self-contained and waterproof hydraulic unit, with permanent magnet 12V motor, has 5inch of vertical travel. It features a high-strength extruded aluminum mounting bracket that sets your motor back 5-1/2inch to let it run in cleaner water. This jack has many advantages like quicker starts, better prop clearance, increased speed, more versatility, and reduced fuel consumption. It mounts easily with included hardware--no drilling... Less
More

Mercury Hydraulic Actuator...

$59.95
eBay Mercury Hydraulic Actuator Ram No Part Marine Boat
No Shipping Info
/mercury-hydraulic/uMUo0nmB2W7CelvFa2BVmg==/info
eBay
IN_STOCK ( In stock )
MERCURY HYDRAULIC ACTUATOR RAM NO PART # MARINE BOAT I am selling a Mercury hydraulic actuator ram. It does not have a part # on it. It measures roughly 9 overall. It has minor wear and tear from storage. It is new out of the package and comes as shown with parts shown only. For more information regarding this product contact a dealer in your area. Free Shipping is for the continental United States only. For shipping outside the continental United States, please inquire about shipping costs be
More

Th Marine Atlas 8 Setback...

$1,049.00
eBay Th Marine Atlas 8 Setback Hydraulic All In One Jack Plate Ahj-8v-dp 300 Hp
+ $47.27 shipping
/th-marine-atlas-8-setback/FCmJ0oCYmPo7188GoHzhVQ==/info
eBay
IN_STOCK ( In stock )
5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE MOUNTING BOLTS NOT INCLUDED - ATLAS™ is truly the best hydraulic jack plate in the world - ATLAS™ is factory installed by more boat manufacturers than any other plate - ATLAS™ is used by more Professional fisherman than any other hydraulic jack plate - ATLAS™ hydraulic actuator is made in the U.S.A., our competition's is from China - T-H Marine/CMC pioneered hydraulic jack plates with the actuator inside the plate, the compet
More

Cmc Ml-65 10 Manual Jack Plate

$299.99
eBay Cmc Ml-65 10 Manual Jack Plate
+ $31.96 shipping
/cmc-ml65-10-manual-jack/C7WbJABLExmPgJftMaqfQw==/info
eBay
IN_STOCK ( In stock )
MOUNTING BOLTS SOLD SEPARATE One Piece Manual Features:• Made of 6061 T6 extruded aluminum alloy • Stainless steel fasteners for maximum strength and durability • Centrally located adjustment screw for positive alignment • 5 1/2 and 10” Set Backs from Transom are available • 5 Vertical Adjustment • Designed to fit standard B.I.A. bolt pattern • Aluminum models rated for up to V6 outboards • Stainless model (ML-65SS, item #65212) rated for V8 outboards Two Piece Manual Featur
More

Cmc Ba-130 Breakaway...

$375.99
eBay Cmc Ba-130 Breakaway Jackplate 13003
+ $31.96 shipping
/cmc-ba130-breakaway/7erC6jfnOIywDN79Phu7Ag==/info
eBay
IN_STOCK ( In stock )
The CMC BA-130 Breakaway unit is designed for duck hunters and/or fisherman that use their boat in shallow stumpy areas. It allows small boats and motors to slide over submerged logs or debris at low speeds to get to a downed bird or your favorite fishing hole. The BA-130 is rated for outboard motors up to a maximum of 130 H.P. The unit is mounted between the boat transom and the outboard motor. It is designed to help minimize damage to the outboard motor and boat transom only when an obstructi
More

CMC PL-65 Transom Jack Plates...

$299.99
Cabela's CMC PL-65 Transom Jack Plates by T-H Marine
+ $26.95 shipping
/cmc-pl65-transom-jack/gNXHm3xlDYpWvvqwyIV3BA==/info
Cabela's
IN_STOCK ( In stock )
CMC PL-65 Transom Jack Plate is a unique outboard motor hydraulic lifting device that works independently of your power trim and tilt to allow you to adjust your motor down while underway for better out-of-hole shots or up for more top-end speed and more prop clearance in shallow water. Made of tough, 1/2 aluminum alloy with stainless steel fasteners. These units are designed to fit all standard outboards and provide a 5-1/2 setback and 5 of vertical travel. Position- indicator gauge mounts in dash of boat for easy and safe determination of motor height. Sending unit is completely sealed and waterproof. Maximum lift: 5.CMC Manual Transom Jack is the same size and has the same features as the above model, but with a manual lift jack. Threaded shaft for easy height adjustment with wrench... Less
More

Cmc Ml-65 Manual 5.5 Inch...

$259.99
eBay Cmc Ml-65 Manual 5.5 Inch Jack Plate, In Box
+ $31.81 shipping
/cmc-ml65-manual-55-inch/5sUEq076xPvbgtMwoYZWzg==/info
eBay
IN_STOCK ( In stock )
5-1/2 Manual Power-Lift (Item #65012) Manual Features: • One Piece Design • Made of 6061 T6 extruded aluminum alloy • Stainless steel fasteners for maximum strength and durability • Centrally located adjustment screw for positive alignment • 5 1/2 Set Back from Transom • 5 Vertical Adjustment • Designed to fit standard B.I.A. bolt pattern without drill holes or making modifications in the boat or motor. Comes with stainless mounting bolts. We do not accept Paypal payments that
More

CMC PL-65 Transom Jack Plates...

$809.99
Cabela's CMC PL-65 Transom Jack Plates by T-H Marine
+ $27.95 shipping
/cmc-pl65-transom-jack/AfL7FaqAQOUbuL54zHNR2g==/info
Cabela's
IN_STOCK ( In stock )
CMC PL-65 Transom Jack Plate is a unique outboard motor hydraulic lifting device that works independently of your power trim and tilt to allow you to adjust your motor down while underway for better out-of-hole shots or up for more top-end speed and more prop clearance in shallow water. Made of tough, 1/2 aluminum alloy with stainless steel fasteners. These units are designed to fit all standard outboards and provide a 5-1/2 setback and 5 of vertical travel. Position- indicator gauge mounts in dash of boat for easy and safe determination of motor height. Sending unit is completely sealed and waterproof. Maximum lift: 5.CMC Manual Transom Jack is the same size and has the same features as the above model, but with a manual lift jack. Threaded shaft for easy height adjustment with wrench... Less
More

CMC PL-65 Transom Jack Plates...

$979.99
Cabela's CMC PL-65 Transom Jack Plates by T-H Marine
+ $27.95 shipping
/cmc-pl65-transom-jack/Wiw69zPzyxgkGLTymcOa7w==/info
Cabela's
IN_STOCK ( In stock )
CMC PL-65 Transom Jack Plate is a unique outboard motor hydraulic lifting device that works independently of your power trim and tilt to allow you to adjust your motor down while underway for better out-of-hole shots or up for more top-end speed and more prop clearance in shallow water. Made of tough, 1/2 aluminum alloy with stainless steel fasteners. These units are designed to fit all standard outboards and provide a 5-1/2 setback and 5 of vertical travel. Position- indicator gauge mounts in dash of boat for easy and safe determination of motor height. Sending unit is completely sealed and waterproof. Maximum lift: 5.CMC Manual Transom Jack is the same size and has the same features as the above model, but with a manual lift jack. Threaded shaft for easy height adjustment with wrench... Less
More

Cmc Transom Clamp Motor...

$69.99
eBay Cmc Transom Clamp Motor Adapter Kit 13022
+ $16.20 shipping
/cmc-transom-clamp-motor/jO1sHU0yjFcBLbjCoMMs0Q==/info
eBay
IN_STOCK ( In stock )
Tilt and Trim Transom Clamp Adapter Transom Clamp Adapter (Item #13022) For installation of motors mounted with transom clamps, an adapter kit is available. This adapter kit is made for quick and easy installation of these type motors. Works with CMC PT-130 Tilt Trim, ATLAS THT-130C Tilt Trim (our larger trim units sized for standard outboard engine mounting with BIA hole pattern). Use with the PT-130 / THT-130C for installation of smaller motors mounted with transom clamps. Also works with ATL
More

Raymarine Acu-400 Actuator...

$1,749.99
Sears Raymarine Acu-400 Actuator Control Unit - Use Type 2 N 3 Hydraulic , Linear N Rotary Mechanical Drives
No Shipping Info
/raymarine-acu400/U8NPzQGQE0SrHF9Br65bVg==/info
Sears
IN_STOCK ( In stock )
RAYMARINE ACU-400 ACTUATOR CONTROL UNIT MFG Part#: E70100 MANUFACTURE: Raymarine UPC: 723193768921
More

Th Marine Cmc 5 Inch Motor...

$143.16
Wholesale Marine Th Marine Cmc 5 Inch Motor Mount Vertical Extension
Free Shipping
/th-marine-cmc-5-inch/0I4kAekMK0kwgXe1xRZijQ==/info
Wholesale Marine
IN_STOCK ( In stock )
Store not rated
Free Shipping
CMC 5 Inch Motor Mount Vertical Extension Features: Allows the motor to be mounted 5 inches higher than the standard mounting on the transom. It is a must for conversion from prop to jet drive. Also can be mounted on the hydraulic Power-Lift to raise the
More

Bennett Hydraulic Trim Tab...

$72.00
eBay Bennett Hydraulic Trim Tab Actuator Assembly Shorter Version, 11-3/4 A1200s
+ $9.59 shipping
/bennett-hydraulic-trim/DaClIPIEwtmqSxAKPbw51A==/info
eBay
IN_STOCK ( In stock )
B ENNTETT MARINE HYDRAULIC TRIM TAB ACTUATOR,A1200S Actuator Assembly, Shorter Version (11-3/4) Product Description: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position.A1200S is designed for installations where space is limited.Sold One Each.(A1200S)NEW.( 219-A1200S) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application WE NOW OFFER LOCAL PICK-U
More

Bennett Marine Hydraulic Trim...

$72.00
eBay Bennett Marine Hydraulic Trim Tab Actuator Assembly Standard13-3/4(a1 101a)
+ $7.89 shipping
/bennett-marine-hydraulic/BjtdayebOpTymrW_-9G2vg==/info
eBay
IN_STOCK ( In stock )
BENNTETT MARINE HYDRAULIC TRIM TAB ACTUATOR, STANDARD, A1101A Actuator Assembly - Standard - 13-3/4 Product Description: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator — thus eliminating external hoses subject to damage.A1101A Standard Internal Hydraulic hose connection. Sold One Each.252899 (219-A1101A) Froo www.froo.com | Froo Cro
More

Tie Down Engineering Brake...

$143.49
Walmart.com Tie Down Engineering Brake Actuator
Free Shipping
/tie-down-engineering/28Sl09HS2jdYvz2CCRkLKA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
This is a great companion for marine maintenance.
More

Bennett Hydraulic Trim Tab...

$76.95
eBay Bennett Hydraulic Trim Tab Actuator Assmby External Line, 13-3/4 (a1101ex)
+ $7.89 shipping
/bennett-hydraulic-trim/_cCiaYNomCw2FXarXRJ7TA==/info
eBay
IN_STOCK ( In stock )
B ENNETT MARINE HYDRAULIC TRIM TAB ACTUATOR,A1101EX Actuator Assembly, External Line (13-3/4) Product Description: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position.A1101EX is an external line connection actuator used in cases of total inaccessibility inside the transom. Unlike the standard actuator, the external line hydraulics enter the transom by means of external tubing above the waterline.Sold One Each.252902 (A110
More

Tst Holding Tank Chem 32oz...

$18.44
eBay Tst Holding Tank Chem 32oz Cmc40226
Free Shipping
/tst-holding-tank-chem/nKpi7CnOx7ZETaNV37xLew==/info
eBay
IN_STOCK ( In stock )
Free Shipping
TST Holding Tank Chem 32oz CMC40226 CMC40226 5.08lbs. Original formula takes only 4 ounces to treat an entire 40-gallon tank in any season. Eliminates odors and lubricates sensors. Safe for all septic tanks. Welcome to Sol y Costa Cargo!We offer FREE SHIPPING on everything in our store, so please enjoy your shopping expereince! To make your purchase as simple as possible, please refer to the store policies listed below. International buyers: Please be aware that all electrical devices are USA 1
More

Electric Tilt N Trim, Add...

$695.00
eBay Electric Tilt N Trim, Add Trim To Small Outboard Boat Motor, Cmc Brand Pt35
Free Shipping
/electric-tilt-n-trim-add/8V2VxdZJdlpvATx_sztH-A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW- PT35 Electric Hydraulic Tilt-n-Trim Rated for 35HP and smaller, 5-1/2 set back to enhance boat stability performance, A total of 84 degree of Tilt and Trim. Weighs only 24lbs. WE SHIP WORLDWIDE !!!
More

Lenco 2 1/4 inch - stroke...

$207.99
Sportsman's Guide Lenco 2 1/4 inch - stroke Actuator
+ $18.99 shipping
/lenco-2-14-inch-stroke/YbXRZY1T3BGyGr0drlS3ow==/info
Sportsman's Guide
IN_STOCK ( In stock )
Lenco 2 1/4 - stroke Actuator. Get your boat into ship-shape with top notch replacement parts for bottom dollar!High-qualit y Actuator works with standard, racing, and performance Lenco trim tab set-ups, as well as air boats. 12 volts, includes Deutsch connector, 6' cable, and mounting hardware.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145