Category

Boating and Sailing Ac...
Showing results for "cmc boat motor trim hydraulic actuator"
Results 1 - 40 of 1500+

Cmc Pt-130 Tilt And Trim...

$579.99
eBay Cmc Pt-130 Tilt And Trim Plate, In Box, W/o Gauge
+ $35.97 shipping
/cmc-pt130-tilt-and-trim/48o3H8ivHEciV8lNal8xcA==/info
eBay
IN_STOCK ( In stock )
PT-130 Power Tilt Trim (Item #13002) PT-130 FEATURES: • Rated for 130 H.P. and Smaller Motors. • 6 Set Back to Enhance Boat Stability and Performance. • 20° of Trim and a Total of 90° of Tilt and Trim. • 1/2 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Standard B.I.A. Bolt Hole Pattern. • Four Stainless Steel Motor Mounting Bolts Included, as well as the wiring harness, relays, and switch.
More

CMC PT-35 Tilt and Trim ...

$594.99
Bass Pro Shops CMC PT-35 Tilt and Trim 16087
+ $26.95 shipping
/cmc-pt35-tilt-and-trim/H3PEffkNLNN53nyCWbV4IA==/info
Bass Pro Shops
IN_STOCK ( In stock )
Designed for up to 35 hp motors Accommodates clamp-on or bolt-on motors without an adapter 11-1/2inch wide with a 5-1/2inch setback Weight: 24 lbs. Customers have asked for a smaller version of the PT-130 and here it is! This is designed for 35 HP and smaller motors. This unit is 11-1/2inch wide with 5-1/2inch setback and only weighs 24 lbs. It utilizes the same hydraulic actuator and will accommodate clamp-on or bolt-on motors without an adapter. This saves you time and money!
More

Cmc Pt-35 Tilt And Trim...

$488.99
eBay Cmc Pt-35 Tilt And Trim Plate, In Box
+ $31.81 shipping
/cmc-pt35-tilt-and-trim/AC61AbYUunPietHZKItjHA==/info
eBay
IN_STOCK ( In stock )
PT-35 Power Tilt Trim (Item #52100) Rated for 35 H.P. and Smaller Motors. • 5 1/2 Set Back to Enhance Boat Stability and Performance. • 84° of Trim and Tilt. • 1/4 6061 T6 Extruded Aluminum Construction with Stainless Steel Fasteners. • Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust! • Accommodates Clamp-on or Bolt-on Motors Without the Need of an Adapter. • Weighs Only 24 Pounds! Comes with all necessary wiring and switch to install. Thanks for looking! We do NOT ACCEP
More

CMC Power Tilt and Trim

$99.99
Cabela's CMC Power Tilt and Trim
+ $12.95 shipping
/cmc-power-tilt-and-trim/X3nIT5LP-DdexRLQX_YyIw==/info
Cabela's
IN_STOCK ( In stock )
Rated at more than 7,800 lbs. of thrust, this is the most powerful power trim unit you can put on your boat. Constructed of 1/2, 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. The hydraulic motor with 12-volt DC power unit and pump assembly is completely self-contained with its own fluid reservoir, eliminating the need for a hydraulic tank inside the boat. Rated for 130 hp and smaller motors, the PT-130 will trim the motor 20 and has a total of 65 trim and tilt. Incorporates a 6 setback, which enhances boat stability and puts the prop in cleaner water, eliminating prop slippage and increasing top-end speed and fuel efficiency. 5-year structure warranty. 1-year hydraulic pump warranty... Less
More

CMC Power Tilt and Trim

$629.99
Cabela's CMC Power Tilt and Trim
+ $27.95 shipping
/cmc-power-tilt-and-trim/A4XfTqU4mRmgO21anlADnw==/info
Cabela's
IN_STOCK ( In stock )
Rated at more than 7,800 lbs. of thrust, this is the most powerful power trim unit you can put on your boat. Constructed of 1/2, 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. The hydraulic motor with 12-volt DC power unit and pump assembly is completely self-contained with its own fluid reservoir, eliminating the need for a hydraulic tank inside the boat. Rated for 130 hp and smaller motors, the PT-130 will trim the motor 20 and has a total of 65 trim and tilt. Incorporates a 6 setback, which enhances boat stability and puts the prop in cleaner water, eliminating prop slippage and increasing top-end speed and fuel efficiency. 5-year structure warranty. 1-year hydraulic pump warranty... Less
More

CMC Power Tilt and Trim

$749.99
Cabela's CMC Power Tilt and Trim
+ $27.95 shipping
/cmc-power-tilt-and-trim/8UYaCGlEYz5vwJLFT-LWoQ==/info
Cabela's
IN_STOCK ( In stock )
Rated at more than 7,800 lbs. of thrust, this is the most powerful power trim unit you can put on your boat. Constructed of 1/2, 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners for maximum strength and durability. No welds or castings to break. The hydraulic motor with 12-volt DC power unit and pump assembly is completely self-contained with its own fluid reservoir, eliminating the need for a hydraulic tank inside the boat. Rated for 130 hp and smaller motors, the PT-130 will trim the motor 20 and has a total of 65 trim and tilt. Incorporates a 6 setback, which enhances boat stability and puts the prop in cleaner water, eliminating prop slippage and increasing top-end speed and fuel efficiency. 5-year structure warranty. 1-year hydraulic pump warranty... Less
More

CMC PT-35 Electric Hydraulic...

$663.99
Sears Marketplace CMC PT-35 Electric Hydraulic Tilt & Trim 52100
No Shipping Info
/cmc-pt35-electric/9eTi7bouJdh95R6ePAp8cQ==/info
Sears Marketplace
IN_STOCK ( In stock )
CMC PT-35 Electric Hydraulic Tilt & Trim 52100
More

Cmc Pt35 Pt-35 Boat Engine...

$549.00
eBay Cmc Pt35 Pt-35 Boat Engine Tilt & Trim Part 52100 Tilt Trim Authorized Dealer
+ $39.95 shipping
/cmc-pt35-pt35-boat/iFnuv6egaZVfVCgY9a2h-Q==/info
eBay
IN_STOCK ( In stock )
CMC PT-35 Tilt Trim A USED CMC PT-35 IS NO BARGAIN AT ANY PRICE - OURS ARE NEW WITH FULL WARRANTY CMC PT-35 Power Tilt Trim Part # 52100 MAX 35HP Boat Owners World is an Authorized CMC Dealer FULL MFG WARRANTY WE HAVE BEEN SELLING CMC PRODUCTS FOR 14 YEARS NEW - NO OPEN BOXES IMPORTANT There will be major delays due to the cold weather and heavy snowfall .MORE THAN 900 UNITS SOLD!CMC PT-35 Tilt and Trim 52100 Electric Hydraulic Tilt Trim You Get Power Tilt Trim, Better Boat Handling, More Speed
More

Th Marine Cmc Pt-35 Electric...

$546.88
Wholesale Marine Th Marine Cmc Pt-35 Electric Hydraulic Tilt And Trim
Free Shipping
/th-marine-cmc-pt35/WEoKwl1Ri_oLMq9NEllaDQ==/info
Wholesale Marine
IN_STOCK ( In stock )
Store not rated
Free Shipping
CMC PT-35 Electric Hydraulic Tilt and Trim Features: Rated for 35 HP and Smaller Motors. 5-1/2 Set Back to Enhance Boat Stability and Performance. 84 Degrees of Trim and Tilt. 1/4 6061-T6 Extruded Aluminum Construction with Stainless Steel Fasteners. El
More

Cmc Pt130 Pt-130 Boat Engine...

$599.95
eBay Cmc Pt130 Pt-130 Boat Engine Tilt & Trim 13002 No Gauge Max 130hp
+ $38.95 shipping
/cmc-pt130-pt130-boat/dM_X-vHGV0XnDI-GOfj_Bw==/info
eBay
IN_STOCK ( In stock )
CMC PT-130 Tilt Trim CMC PT-130 Power Tilt Trim Part # 13002 NO GAUGE Boat Owners World is an Authorized CMC Dealer FULL MFG WARRANTY WE HAVE BEEN SELLING CMC PRODUCTS FOR 14 YEARS NO OPEN BOXES - THIS IS BRAND NEW NOT A RETURN - NOT A REBUILT UNIT IMPORTANT There will be major delays due to the cold weather and heavy snowfall MORE THAN 300 UNITS SOLD! 90 Degrees Of Tilt And Trim !Experience Convenience Improved Performance The CMC PT-130 Tilt Trim incorporates a 6 setback which enhances Boat
More

Electric Tilt N Trim, Add...

$695.00
eBay Electric Tilt N Trim, Add Trim To Small Outboard Boat Motor, Cmc Brand Pt35
Free Shipping
/electric-tilt-n-trim-add/8V2VxdZJdlpvATx_sztH-A==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW- PT35 Electric Hydraulic Tilt-n-Trim Rated for 35HP and smaller, 5-1/2 set back to enhance boat stability performance, A total of 84 degree of Tilt and Trim. Weighs only 24lbs. WE SHIP WORLDWIDE !!!
More

Cmc Electric Hydraulic Power...

$1,077.00
eBay Cmc Electric Hydraulic Power Lift W/ Gauge 65001
No Shipping Info
/cmc-electric-hydraulic/HYzcPt3ZRBVN9S5tBXWAfA==/info
eBay
IN_STOCK ( In stock )
Contact us anytime, we are here to help! CMC Electric Hydraulic Power Lift w/ gauge 65001 CMC Electric Hydraulic Power Lift w/ gauge 65001 CMC Electric Hydraulic Power Lift Manufacturer s Part Number: 65001 Position Indicator Gauge included 5-1/2 Set Back, gives 5 vertical travel Rated for up to 7800 lbs. For Outboard motors up to V6 Entire system is waterproof. 12V DC Marine Item Condition: New, old stock inventory item. NOS means there may be signs of age from shelf life. All NOS are sold in
More

Cmc Pl-65 Hs Hydraulic Jack...

$864.99
eBay Cmc Pl-65 Hs Hydraulic Jack Plate, In Box W/ Gauge
+ $40.03 shipping
/cmc-pl65-hs-hydraulic/vK7XQj38ilAeS5x4yTk4Tg==/info
eBay
IN_STOCK ( In stock )
This is the Hi Speed model. Make sure to compare features when looking. We do not sell the older, slower version of these jackplates. Don't be fooled!! PL-65 HS 5-1/2 Set-Back High Speed Hyd Jack Plate (Item #65302) ***NEW*** Features Of Patented Hydraulic High Speed Power-Lift® Full Stroke in 8 seconds! (U.S. Patent 4,482,330) 1. Made of 3/4 and 1/2 inch 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners. Ideal for fresh or salt water use. No welds or castings to b
More

Cmc Pl-65 Hydraulic Outboard...

$810.00
eBay Cmc Pl-65 Hydraulic Outboard Power Lift 5.5
+ $25.00 shipping
/cmc-pl65-hydraulic/UjyDkyr_T6WX5cnJ1rI5Fg==/info
eBay
IN_STOCK ( In stock )
This listing is for brand new CMC hydraulic outboard power lift. Model PL-65. 5 1/2 set-back. Rated for V6 and smaller motors. Provides 5 of vertical travel. 1.5 inches of adjustment on the transom and motor brackets. Gauge not included. Mounting hardware included. In order for your outboard engine to perform at its full potential and efficiency, it should be adjusted to different heights for different speeds, waer conditions, and varying loads in your boat. This CMC power lift will position
More

CMC PL-65 Electric Hydraulic...

$964.99
Bass Pro Shops CMC PL-65 Electric Hydraulic Transom Jack Plate 1146
+ $36.95 shipping
/cmc-pl65-electric/fTeNRatvSwuvL-22uf5tYA==/info
Bass Pro Shops
IN_STOCK ( In stock )
Set optimum motor height throughout all speeds Self-contained, waterproof hydraulic unit Heavy-duty extruded aluminum mounting bracket 5inch of vertical travel Provides quicker starts, better prop clearance, increased speed and reduced fuel consumption With this powerful transom jack, one switch lets you easily set optimum motor height throughout all speeds. This self-contained and waterproof hydraulic unit, with permanent magnet 12V motor, has 5inch of vertical travel. It features a high-strength extruded aluminum mounting bracket that sets your motor back 5-1/2inch to let it run in cleaner water. This jack has many advantages like quicker starts, better prop clearance, increased speed, more versatility, and reduced fuel consumption. It mounts easily with included hardware--no drilling... Less
More

Th Marine Cmc 5 Inch Motor...

$143.16
Wholesale Marine Th Marine Cmc 5 Inch Motor Mount Vertical Extension
Free Shipping
/th-marine-cmc-5-inch/0I4kAekMK0kwgXe1xRZijQ==/info
Wholesale Marine
IN_STOCK ( In stock )
Store not rated
Free Shipping
CMC 5 Inch Motor Mount Vertical Extension Features: Allows the motor to be mounted 5 inches higher than the standard mounting on the transom. It is a must for conversion from prop to jet drive. Also can be mounted on the hydraulic Power-Lift to raise the
More

CMC PL-65 Transom Jack Plates...

$299.99
Cabela's CMC PL-65 Transom Jack Plates by T-H Marine
+ $26.95 shipping
/cmc-pl65-transom-jack/gNXHm3xlDYpWvvqwyIV3BA==/info
Cabela's
IN_STOCK ( In stock )
CMC PL-65 Transom Jack Plate is a unique outboard motor hydraulic lifting device that works independently of your power trim and tilt to allow you to adjust your motor down while underway for better out-of-hole shots or up for more top-end speed and more prop clearance in shallow water. Made of tough, 1/2 aluminum alloy with stainless steel fasteners. These units are designed to fit all standard outboards and provide a 5-1/2 setback and 5 of vertical travel. Position- indicator gauge mounts in dash of boat for easy and safe determination of motor height. Sending unit is completely sealed and waterproof. Maximum lift: 5.CMC Manual Transom Jack is the same size and has the same features as the above model, but with a manual lift jack. Threaded shaft for easy height adjustment with wrench... Less
More

Cmc Pl-65 Hs Hydraulic...

$890.00
eBay Cmc Pl-65 Hs Hydraulic Outboard Power Lift 5.5
+ $25.00 shipping
/cmc-pl65-hs-hydraulic/9Dl8NulD4lqk96PkjgNeMw==/info
eBay
IN_STOCK ( In stock )
This listing is for brand new CMC hydraulic outboard power lift. Model PL-65 High Speed. 5 1/2 set-back. Rated for V6 300 HP and smaller motors. Provides 5 of vertical travel 1.5 inches of adjustment on the transom and motor brackets. Gauge not included. Will raise a 300 HP V6 motor up in approximatly 8 seconds which is almost twice as fast as the normal PL-65 Power Lift. Ideal for boaters who want a jack plate for high speed positioning of their motor. In order for your outboard engine to pe
More

Bennett Hydraulic Sport Trim...

$834.99
Sportsman's Guide Bennett Hydraulic Sport Trim Tab Kit with Switch 9x12 inch
+ $19.99 shipping
/bennett-hydraulic-sport/JMYPvekz4qZE2o8Nol4EJg==/info
Sportsman's Guide
IN_STOCK ( In stock )
Bennett Hydraulic Sport Trim Tab Kit. A complete Tab Kit sized for smaller boats. It's all about attitude! No, not that kind of attitude... I'm talking about your boat's running attitude. Trim Tabs can make all the difference in how your boat runs. They reduce fuel consumption, engine labor, hull stress, wake pounding... they even improve visibility and handling! A must-have to turn teeth-chattering rough rides into smooth sailin'. Make sure you've got the gear to adapt to weight, weather, and water conditions, and keep your boat runnin' like a top!For single I/O, single inboard, or single outboard boats 15-19' long 2 stainless steel trim tabs with adjustable afterplanes Hydraulic power unit 2 actuating cylinders Rocker switch All necessary wiring, tubing, hardware, and installation... Less
More

CMC PL-65 Transom Jack Plates...

$809.99
Cabela's CMC PL-65 Transom Jack Plates by T-H Marine
+ $27.95 shipping
/cmc-pl65-transom-jack/AfL7FaqAQOUbuL54zHNR2g==/info
Cabela's
IN_STOCK ( In stock )
CMC PL-65 Transom Jack Plate is a unique outboard motor hydraulic lifting device that works independently of your power trim and tilt to allow you to adjust your motor down while underway for better out-of-hole shots or up for more top-end speed and more prop clearance in shallow water. Made of tough, 1/2 aluminum alloy with stainless steel fasteners. These units are designed to fit all standard outboards and provide a 5-1/2 setback and 5 of vertical travel. Position- indicator gauge mounts in dash of boat for easy and safe determination of motor height. Sending unit is completely sealed and waterproof. Maximum lift: 5.CMC Manual Transom Jack is the same size and has the same features as the above model, but with a manual lift jack. Threaded shaft for easy height adjustment with wrench... Less
More

CMC PL-65 Transom Jack Plates...

$979.99
Cabela's CMC PL-65 Transom Jack Plates by T-H Marine
+ $27.95 shipping
/cmc-pl65-transom-jack/Wiw69zPzyxgkGLTymcOa7w==/info
Cabela's
IN_STOCK ( In stock )
CMC PL-65 Transom Jack Plate is a unique outboard motor hydraulic lifting device that works independently of your power trim and tilt to allow you to adjust your motor down while underway for better out-of-hole shots or up for more top-end speed and more prop clearance in shallow water. Made of tough, 1/2 aluminum alloy with stainless steel fasteners. These units are designed to fit all standard outboards and provide a 5-1/2 setback and 5 of vertical travel. Position- indicator gauge mounts in dash of boat for easy and safe determination of motor height. Sending unit is completely sealed and waterproof. Maximum lift: 5.CMC Manual Transom Jack is the same size and has the same features as the above model, but with a manual lift jack. Threaded shaft for easy height adjustment with wrench... Less
More

Cmc High Speed Hydraulic...

$899.99
eBay Cmc High Speed Hydraulic Power-lift Transom Jack W/o Gauge
+ $9.99 shipping
/cmc-high-speed-hydraulic/XUC5B0D9bQDPEp97Oz-cWQ==/info
eBay
IN_STOCK ( In stock )
(Pictures are stock photo and item may vary stightly)Cmc High Speed Hydraulic Power-Lift Transom Jack W/O Gauge JACK PLATE HIGH SPEED POWER-LIFT (T-H MARINE) This powerful unit will handle anything up to a V-6 300hp motor at full throttle at a full stroke speed of only 8 seconds, twice as fast as some other units! The hydraulic actuator is inside the structure, yet is fully accessible without removing the engine and there are no hoses and no remote hydraulic pump to mount in the boat. The paten
More

CMC Power Tilt and Trim 1137

$759.99
Bass Pro Shops CMC Power Tilt and Trim 1137
+ $36.95 shipping
/cmc-power-tilt-and-trim/AL2t1ohz9RDZ497wu_uN9g==/info
Bass Pro Shops
IN_STOCK ( In stock )
Heavy-duty aluminum construction Waterproof 12V marine hydraulic system Ideal for freshwater or saltwater applications Promotes quicker out-of-the-hole starts, increased top-end speed, better gas mileage Includes stainless steel hardware, wire assembly and switch This is one tough unit with heavy-duty aluminum construction and waterproof 12V marine hydraulic system that's impervious to fresh and saltwater corrosion. Benefits include quicker out-of-the-hole starts, increased top-end speed, more prop clearance in shallow water and better gas mileage. Powerful and reliable motor provides 20 trim or 90 tilt. Available with or without dash-mount trim gauge. 6inch setback increases boat stability and improves prop performance. The mount is pre-drilled for standard BIA bolt patterns (12-7/8inch... Less
More

Cmc High Speed Hydraulic...

$1,089.99
eBay Cmc High Speed Hydraulic Power-lift Transom Jack With Gauge
+ $9.99 shipping
/cmc-high-speed-hydraulic/7u_6ZOG_fEKbFMSMQZSBfQ==/info
eBay
IN_STOCK ( In stock )
wakezonemarine Store (Pictures are stock photo and item may vary stightly)Cmc High Speed Hydraulic Power-Lift Transom Jack With Gauge JACK PLATE HIGH SPEED POWER-LIFT (T-H MARINE) This powerful unit will handle anything up to a V-6 300hp motor at full throttle at a full stroke speed of only 8 seconds, twice as fast as some other units! The hydraulic actuator is inside the structure, yet is fully accessible without removing the engine and there are no hoses and no remote hydraulic pump to mount
More

Cmc Ba-130 Breakaway...

$375.99
eBay Cmc Ba-130 Breakaway Jackplate 13003
+ $31.96 shipping
/cmc-ba130-breakaway/7erC6jfnOIywDN79Phu7Ag==/info
eBay
IN_STOCK ( In stock )
The CMC BA-130 Breakaway unit is designed for duck hunters and/or fisherman that use their boat in shallow stumpy areas. It allows small boats and motors to slide over submerged logs or debris at low speeds to get to a downed bird or your favorite fishing hole. The BA-130 is rated for outboard motors up to a maximum of 130 H.P. The unit is mounted between the boat transom and the outboard motor. It is designed to help minimize damage to the outboard motor and boat transom only when an obstructi
More

Bennett Hydraulic Trim Tab...

$779.99
Sportsman's Guide Bennett Hydraulic Trim Tab Kit with Switch 12x18 inch
+ $19.99 shipping
/bennett-hydraulic-trim/KVjQE_aupJs8Ov2rdtqUEQ==/info
Sportsman's Guide
IN_STOCK ( In stock )
Bennett Hydraulic Trim Tab Kit. It's all about attitude! No, not that kind of attitude... I'm talking about your boat's running attitude. Trim Tabs can make all the difference in how your power boat runs. They reduce fuel consumption, engine labor, hull stress, wake pounding... they even improve visibility and handling! A must-have to turn teeth-chattering rough rides into smooth sailin'. Make sure you've got the gear to adapt to weight, weather, and water conditions, and keep your boat runnin' like a top!You get all this:2 stainless steel trim tabs with adjustable afterplanes Hydraulic power unit 2 actuating cylinders Rocker switch All necessary wiring, tubing, hardware, and installation instructions. Tab Size 12x18:For Boats: 22-27' Engine Configuration: Twin I/O or Twin Outboard Order... Less
More

Tie Down Engineering Brake...

$143.49
Walmart.com Tie Down Engineering Brake Actuator
Free Shipping
/tie-down-engineering/28Sl09HS2jdYvz2CCRkLKA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
This is a great companion for marine maintenance.
More

Cmc Ml-65 10 Manual Jack Plate

$299.99
eBay Cmc Ml-65 10 Manual Jack Plate
+ $31.96 shipping
/cmc-ml65-10-manual-jack/C7WbJABLExmPgJftMaqfQw==/info
eBay
IN_STOCK ( In stock )
MOUNTING BOLTS SOLD SEPARATE One Piece Manual Features:• Made of 6061 T6 extruded aluminum alloy • Stainless steel fasteners for maximum strength and durability • Centrally located adjustment screw for positive alignment • 5 1/2 and 10” Set Backs from Transom are available • 5 Vertical Adjustment • Designed to fit standard B.I.A. bolt pattern • Aluminum models rated for up to V6 outboards • Stainless model (ML-65SS, item #65212) rated for V8 outboards Two Piece Manual Featur
More

Bennett Marine Hydraulic Trim...

$72.00
eBay Bennett Marine Hydraulic Trim Tab Actuator Assembly Standard13-3/4(a1 101a)
+ $7.89 shipping
/bennett-marine-hydraulic/BjtdayebOpTymrW_-9G2vg==/info
eBay
IN_STOCK ( In stock )
BENNTETT MARINE HYDRAULIC TRIM TAB ACTUATOR, STANDARD, A1101A Actuator Assembly - Standard - 13-3/4 Product Description: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator — thus eliminating external hoses subject to damage.A1101A Standard Internal Hydraulic hose connection. Sold One Each.252899 (219-A1101A) Froo www.froo.com | Froo Cro
More

Jack Plate Hydraulic High...

$1,069.95
eBay Jack Plate Hydraulic High Speed Cmc 119- 65001
+ $34.40 shipping
/jack-plate-hydraulic-high/C4ElIHyAnyuaEwHIJ_gBOw==/info
eBay
IN_STOCK ( In stock )
By far one of the finest Jack plates on the market!Why:1. The highest quality materials 2. Fast transit speed 3. No boat mounted pump (saves space)4. No hydraulic lines (self contained unit)HYDRAULIC JACK PLATE Hydraulic Jack plate 119- 65001 -LNS, MSRP (List) $ 1309.49 Hardware Gauge included Features:3/4 1/2 6061 T6 Aluminum Stainless steel fasteners No welds or castings 4417 pounds of thrust V6 300 HP max Hydraulic actuator mounted inside Pump is mounted on actuator - not in boat Permanent
More

Bennett Hydraulic Trim Tab...

$72.00
eBay Bennett Hydraulic Trim Tab Actuator Assembly Shorter Version, 11-3/4 A1200s
+ $9.59 shipping
/bennett-hydraulic-trim/DaClIPIEwtmqSxAKPbw51A==/info
eBay
IN_STOCK ( In stock )
B ENNTETT MARINE HYDRAULIC TRIM TAB ACTUATOR,A1200S Actuator Assembly, Shorter Version (11-3/4) Product Description: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position.A1200S is designed for installations where space is limited.Sold One Each.(A1200S)NEW.( 219-A1200S) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application WE NOW OFFER LOCAL PICK-U
More

Bennett Hydraulic Trim Tab...

$654.99
Sportsman's Guide Bennett Hydraulic Trim Tab Kit with Switch 9x12 inch
+ $19.99 shipping
/bennett-hydraulic-trim/NtrKAao0bH6aAta2zTe3FA==/info
Sportsman's Guide
IN_STOCK ( In stock )
Bennett Hydraulic Trim Tab Kit. It's all about attitude! No, not that kind of attitude... I'm talking about your boat's running attitude. Trim Tabs can make all the difference in how your power boat runs. They reduce fuel consumption, engine labor, hull stress, wake pounding... they even improve visibility and handling! A must-have to turn teeth-chattering rough rides into smooth sailin'. Make sure you've got the gear to adapt to weight, weather, and water conditions, and keep your boat runnin' like a top!You get all this:2 stainless steel trim tabs with adjustable afterplanes Hydraulic power unit 2 actuating cylinders Rocker switch All necessary wiring, tubing, hardware, and installation instructions. Tab Size 9x12:For Boats: 15-19' Engine Configuration: Single I/O, Inboard,... Less
More

Bennett Hydraulic Trim Tab...

$76.95
eBay Bennett Hydraulic Trim Tab Actuator Assmby External Line, 13-3/4 (a1101ex)
+ $7.89 shipping
/bennett-hydraulic-trim/_cCiaYNomCw2FXarXRJ7TA==/info
eBay
IN_STOCK ( In stock )
B ENNETT MARINE HYDRAULIC TRIM TAB ACTUATOR,A1101EX Actuator Assembly, External Line (13-3/4) Product Description: Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position.A1101EX is an external line connection actuator used in cases of total inaccessibility inside the transom. Unlike the standard actuator, the external line hydraulics enter the transom by means of external tubing above the waterline.Sold One Each.252902 (A110
More

Pelican Pedal Boat Motor...

$54.99
Target Pelican Pedal Boat Motor Mount - Wood
Free Shipping
/pelican-pedal-boat-motor/jIGgbgWYfkG57bD4SJkq7g==/info
Target
IN_STOCK ( In stock )
Free Shipping
Find boating accessories at Target.com! Make your pedal boat go vroom. The pelican pedal boat motor mount turns a simple pedal boat into an exciting adventure boat with the addition of a small electric trolling motor. This sturdy, stainless steel motor mount from pelican installs easily.
More

Mercury Hydraulic Actuator...

$59.95
eBay Mercury Hydraulic Actuator Ram No Part Marine Boat
No Shipping Info
/mercury-hydraulic/uMUo0nmB2W7CelvFa2BVmg==/info
eBay
IN_STOCK ( In stock )
MERCURY HYDRAULIC ACTUATOR RAM NO PART # MARINE BOAT I am selling a Mercury hydraulic actuator ram. It does not have a part # on it. It measures roughly 9 overall. It has minor wear and tear from storage. It is new out of the package and comes as shown with parts shown only. For more information regarding this product contact a dealer in your area. Free Shipping is for the continental United States only. For shipping outside the continental United States, please inquire about shipping costs be
More

Tie Down Engineering Brake...

$203.01
Walmart.com Tie Down Engineering Brake Actuator
Free Shipping
/tie-down-engineering/GrdYYVCKALnuTNho1riZuw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
This is a great companion for marine maintenance.
More

Bennett Hydraulic Trim Tab...

$674.99
Sportsman's Guide Bennett Hydraulic Trim Tab Kit with Switch 9x18 inch
+ $19.99 shipping
/bennett-hydraulic-trim/n4H_2Jdfnmm2klOa7nsXJg==/info
Sportsman's Guide
IN_STOCK ( In stock )
Bennett Hydraulic Trim Tab Kit. It's all about attitude! No, not that kind of attitude... I'm talking about your boat's running attitude. Trim Tabs can make all the difference in how your power boat runs. They reduce fuel consumption, engine labor, hull stress, wake pounding... they even improve visibility and handling! A must-have to turn teeth-chattering rough rides into smooth sailin'. Make sure you've got the gear to adapt to weight, weather, and water conditions, and keep your boat runnin' like a top!You get all this:2 stainless steel trim tabs with adjustable afterplanes Hydraulic power unit 2 actuating cylinders Rocker switch All necessary wiring, tubing, hardware, and installation instructions.Tab Size 9x18:For Boats: 19-24' Engine Configuration: Single I/O, Inboard, OutboardOrder... Less
More

Cmc Pl-65 Hs Hydraulic Jack...

$729.99
eBay Cmc Pl-65 Hs Hydraulic Jack Plate, In Box W/o Gauge Hs (high Speed) Model
+ $38.27 shipping
/cmc-pl65-hs-hydraulic/Jou2Ur69DEY3_VWhHNZ6rg==/info
eBay
IN_STOCK ( In stock )
This is the Hi Speed model. Make sure to compare features when looking. We do not sell the older, slower version of these jackplates. Don't be fooled!! PL-65 HS 5-1/2 Set-Back High Speed Hyd Jack Plate (Item #65302) ***NEW*** Features Of Patented Hydraulic High Speed Power-Lift® Full Stroke in 8 seconds! (U.S. Patent 4,482,330) 1. Made of 3/4 and 1/2 inch 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners. Ideal for fresh or salt water use. No welds or castings to b
More

Bennett Hydraulic Trim Tab...

$29.99
eBay Bennett Hydraulic Trim Tab Pump Ram Actuator Mounting Kit - H1170a
+ $5.99 shipping
/bennett-hydraulic-trim/6TrGWQ2YWEvNBZCdTdE0CA==/info
eBay
IN_STOCK ( In stock )
Michigan Motorz has proudly served the eBay community for OVER 15 years with a 100% positive feedback rating! Bennett Marine Trim Tab Pump and Cylinder Mounting Hardware Kit Comes as seen with the pump mounting bracket, all mounting screws, brass tubes,hydraulic ferrules for the hoses, tubing bend clamps. Part #H1170A Payment Terms Winning bid to be paid in advance by MasterCard, Visa, Discover, PayPal or cash-in-person. Balance must be paid within 7 days of end of auction unless prior arrangem
More

Tie Down Engineering Brake...

$220.64
Walmart.com Tie Down Engineering Brake Actuator
Free Shipping
/tie-down-engineering/mwH8VZyz_JER9Xd_a0PRBA==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
This is a great companion for marine maintenance.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145