Clarke Welders Turbo 100en Home and Garden - Shopping.com
Showing results for "clarke welders turbo 100en"
Results 1 - 40 of 1500+

Eastwood Company 12011 Mig135...

$374.52
Autoplicity Eastwood Company 12011 Mig135 Welder
+ $7.99 shipping
/eastwood-company-12011/6KKddw3GE7QyFDmceXuXgA==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Eastwood Company 12011 Mig135 Welder Eastwood Company 12011 MIG135 welder (57 lbs.) 0.023 Steel MIG wire Extra 0.023 contact tip Gas regulator with hose Tweco-Style gun and consumables Switchable drive roller 8' Ground cable and gun cable Wire brush Welding face shield Welds mild and stainless steel, 24-ga. to 1/4 25-135-amp welding range Powered by standard 120v household current Does not include gas bottle 3-Year manufacture's warranty Compare to similar welders that sell for over $500
More

Clarke 180en Mig Welder...

$84.95
eBay Clarke 180en Mig Welder Rectifier Weld Parts We 6916
+ $12.50 shipping
/clarke-180en-mig-welder/L0apABu0qw9DJBzmv-9Rwg==/info
eBay
IN_STOCK ( In stock )
A Clarke Rectifier, P/N WE 6916 or WE22400038. This Rectifier fits the Clarke 180EN welder and the Clarke Hot Shot Spool Gun welder WE6442 185SG.The rectifier has 4 plates which measure 3 7/8 long by 3 7/8 wide. The distance from the first palte to the last plate is about 3. There are 2 diodes on each plate for a total of 8 diodes. Since this is an electrical part, there are no returns on this rectifier. Clarke is in bankruptucy, so you might want to stock up on these Clarke parts. If you ha
More

Polyvance 5700ht Mini Weld...

$278.87
Autoplicity Polyvance 5700ht Mini Weld Model 7 Airless Plastic Welder
+ $12.15 shipping
/polyvance-5700ht-mini/m0PVG9MtLNpfjGK5-KVYoQ==/info
Autoplicity
IN_STOCK ( In stock )
Store not rated
Polyvance 5700ht Mini Weld Model 7 Airless Plastic Welder Urethane Supply Company 5700HTAirless Welder Plastic Kit
More

Clarke Mig Welder 3 Position...

$54.95
eBay Clarke Mig Welder 3 Position Switch 180en Parts
+ $7.45 shipping
/clarke-mig-welder-3/TBJJGyJ6WTwsQ_bp3vRQ_g==/info
eBay
IN_STOCK ( In stock )
A Clarke 3 postion main switch, P/N WE22205116. This main switch fits the Clarke 180EN welder . The switch is 1 9/16 in diameter, and with the knob removed, it is just under 2 3/4 long from the end of the shaft to the other end of the switch. It is held into the front panel of the welder with 2 screws just under a 1 1/8 spacing.This switch adjusts the heat setting on the welder. Since this is an electrical part, there are no returns on this part. Clarke is in bankruptucy, so you might want t
More

Clarke Arc Welder - 85e

$83.95
eBay Clarke Arc Welder - 85e
Free Shipping
/clarke-arc-welder-85e/0a6YoD9duZpS5Rnon0DCcw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Clarke 85 amp arc welder WE6481 New in Box For DIY and home workshops Two voltage settings for better welding heat control Operates from standard 120 Volt circuit Includes welding mask, chipping hammer, and manual Welds up to 1/8-inch steel in a single pass
More

Turbo Air 30200R0100 3/4 hp...

$809.00
WebstaurantStore Turbo Air 30200R0100 3/4 hp Compressor - 115V, R-404A
No Shipping Info
/turbo-air-30200r0100-34/Hj2sRbGHEuDob-6XyneJYQ==/info
WebstaurantStor e
IN_STOCK ( In stock )
Designed to circulate R-404A refrigerant, this Turbo Air 30200R0100 replacement compressor for TSF-49SD and CAJ2432Z reach-in freezers works with your unit to keep products at foodsafe storage temperatures. This 3/4 hp compressor replaces a worn out or broken compressor to keep your unit operating efficiently and minimizing downtime. 115V. 30200R0100 From Turbo Air Refrigeration
More

Clarke Mig Welder Pcb Circuit...

$79.95
eBay Clarke Mig Welder Pcb Circuit Board 180 En 180en Parts
+ $8.70 shipping
/clarke-mig-welder-pcb/7B3X6Zl13JjXJP1tXwPJ5w==/info
eBay
IN_STOCK ( In stock )
A Printed Circuit Board for a Clarke 180EN Mig Welder,P/N WE 7065 or WE22710037.This PCB fits the Clarke 180EN welder .It measures 3 3/4 x 3 7/8. It has 4 spade terminal connections, and a 5 pin connection. Since this is an electrical part, there are no returns on this part. Clarke is in bankruptucy, so you might want to stock up on these Clarke parts. If you have a Clarke Welder, and need parts which we do not have listed on e-bay - send us an e-mail and we might be able to help you out. ***
More

Lincoln Electric AC-225 230V...

$309.99
Northern Tool Lincoln Electric AC-225 230V Stick Welder - 225 Amp Output, Model K1170
+ $116.63 shipping
/lincoln-electric-ac225/pLil-yTg8IheF9oKSnoYxg==/info
Northern Tool
IN_STOCK ( In stock )
The Lincoln electric AC-225 compact stick welder produces an extremely smooth AC arc for welding a wide variety of materials including carbon, low alloy and stainless steels as well as cast iron. Ideal for home, farm, shop, repair and maintenance, build-up welding and light fabrication. Easy to install with attached input power cable and NEMA 6-50P plug, plus it's easy to operate a full range 40-225 Amp selector switch quickly sets the welding current and ensures a uniform arc each and every time you weld. Smooth arc makes it easy to weld with different electrodes, including mild steel, low hydrogen, stainless steel and hardfacing electrodes. Electrode Size in. 3/32-5/32, Welding Amperage Range 40-225, Duty Cycle 20 at 225A, 25V, Clamp Cable Length ft. 10, Amperage Adjustments 40-225,... Less
More

Turbo Air 3952127G10 1/4 hp...

$239.99
WebstaurantStore Turbo Air 3952127G10 1/4 hp Compressor - 115V, R-134a
No Shipping Info
/turbo-air-3952127g10-14/P3YKrcQZGmYiy93NZM3pSQ==/info
WebstaurantStor e
IN_STOCK ( In stock )
Keep select Turbo Air refrigeration units running smoothly with this 3952127G10 compressor! This 1/4 hp compressor runs on a 115V electrical connection and circulates R-134a refrigerant to keep foods at safe storage temperatures. 3952127G10 From Turbo Air Refrigeration
More

Turbo Air CAJ9513Z 1 hp...

$929.00
WebstaurantStore Turbo Air CAJ9513Z 1 hp Compressor - 115V, R-404A
No Shipping Info
/turbo-air-caj9513z-1-hp/ojYoghrVw1AI54JGcgX5mw==/info
WebstaurantStor e
IN_STOCK ( In stock )
Designed to circulate R-404A refrigerant, this Turbo Air CAJ9513Z replacement compressor works with your unit to keep products at food-safe storage temperatures. This 1 hp compressor replaces a worn out or broken compressor to keep your unit operating efficiently and minimizing downtime. 115V. Overall Dimensions: Height: 10 CAJ9513Z From Turbo Air Refrigeration
More

Clarke Mig Welder Wire Feed...

$19.95
eBay Clarke Mig Welder Wire Feed Drive Roller 125en Parts
Free Shipping
/clarke-mig-welder-wire/VBOtNm4-3rwxtbsx-t9n2g==/info
eBay
IN_STOCK ( In stock )
Free Shipping
If you want a shipping discount on multiple items, buy the items you want, BUT do not pay for any items until AFTER we send you the invoice. The invoice will be in your “My E-bay” “Buying” “Won” area. Separate payments for each item by PayPal CANNOT be combine for discounted shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping.We cannot refund shipping charges once payment(s) have
More

Clarke Mig Welder Min Max...

$11.95
eBay Clarke Mig Welder Min Max Heat Switch 180en Parts
Free Shipping
/clarke-mig-welder-min-max/WAyA7CmmJ3gl5YmnkUtlzg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
If you want a shipping discount on multiple items, buy the items you want, do not pay for any items , and we will send you an invoice. The invoice will be in your “My E-bay” “Buying” “”Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have bee
More

Energizer EN900 12-Volt...

$67.44
Walmart.com Energizer EN900 12-Volt 900-Watt Power Inverter
+ $10.20 shipping
/energizer-en900-12volt/wdjj51BVda7QjD0hvsvXmg==/info
Walmart.com
IN_STOCK ( In stock )
The Energizer EN900 AC Power Inverter provides a powerfully performing and versatile charging device suitable for a wide variety of locations and situations. This power inverter features a 900W continuous power capability, with a max power of 1800W, which helps to provide energy to a wide array of devices. The 900 Watt 12-Volt power inverter offers two standard AC outlets and two standard USB charging ports. It can be easily installed via direct battery connection or by plugging it into any standard cigarette lighter. This device also comes complete with an ultra-silent thermal fan and is compatible with an optional remote control for your convenience.
More

Clarke Mig Welder Wire Drive...

$23.95
eBay Clarke Mig Welder Wire Drive Brake Spool Holder Parts
Free Shipping
/clarke-mig-welder-wire/7TaYj6DebVlw4-EMq720Rw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
A Clarke Wire Drive Brake for the 130EN and 180EN mig welders.This wire drive brake allows you to use both 8 diameter spools with a 2 center and 4 diameter spools with a 5/8 center. 2nd and 3rd pictures show 4 spool and 8 spool (which are not included) mounted on the drive brake. Clarke is in bankruptucy, so you might want to stock up on these Clarke parts. If you have a Clarke Welder, and need parts which we do not have listed on e-bay - send us an e-mail and we might be able to help you
More

Welders Magnetic Ground Clamp...

$19.99
Northern Tool Welders Magnetic Ground Clamp - 6 7/8 Inch x 3 3/4 Inch x 2 5/8 Inch, Northern Industrial
+ $6.49 shipping
/welders-magnetic-ground/6kYHf9NwPDBF3Zk_Z3sISw==/info
Northern Tool
IN_STOCK ( In stock )
The Northern Industrial Welders Magnetic Ground Clamp features a powerful magnet in 3 1/2in. steel housing. Designed to save time and money for all welders. Adjustable Yes, Dimensions L x W x H in. 6 7/8 x 3 3/4 x 2 5/8, Product Type Clamp. Spring-loaded with contact point for excellent conductivity Includes handle for 360 rotation, removal or to move the electrode Model Number: AMC4973. Age Group: Adult.
More

Clarke Mig Welder Pcb Circuit...

$69.95
eBay Clarke Mig Welder Pcb Circuit Board 160 En 160en Parts 22710043
+ $8.70 shipping
/clarke-mig-welder-pcb/72Wrt_4CFHCWmdo3F2wTmg==/info
eBay
IN_STOCK ( In stock )
If you want a shipping discount on multiple items, buy the items you want, BUT do not pay for any items until AFTER we send you the invoice. The invoice will be in your “My E-bay” “Buying” “Won” area. Separate payments for each item by PayPal CANNOT be combine for discounted shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping.We cannot refund shipping charges once payment(s) have
More

Hobart Welder Generator Cover...

$129.99
Northern Tool Hobart Welder Generator Cover - Fits Hobart Champion Elite Welders with Rear-Exhaust, Model 770714
+ $7.99 shipping
/hobart-welder-generator/Oe5J4QeXEXgIMW3DIMgOaw==/info
Northern Tool
IN_STOCK ( In stock )
This Hobart Welder Generator Cover resists stains and mildew, while protecting the finish and internal components of your welder. Designed to fit the Hobart Champion Elite 23 HP Welder/Generator Item #26167, sold separately. U.S.A. Fits Select Hobart welders, Dimensions L x W x H in. 41 x 20 x 28, Product Type Cover. Fits with or without handle and wheel kit installed Model Number: 770748. Age Group: Adult.
More

Hobart Welder Generator Cover...

$129.99
Northern Tool Hobart Welder Generator Cover - Fits Hobart Champion Elite Welders with Mid-Exhaust, Model #770619
+ $7.99 shipping
/hobart-welder-generator/XQeaHO7iIo26AMxcXMru-A==/info
Northern Tool
IN_STOCK ( In stock )
This Hobart Welder Generator Cover protects your investment from the elements. Cover is specifically designed to fit Hobart's Champion Elite welders older Elite models with exhaust coming out of middle on the top. U.S.A. Fits Select Hobart welders, Dimensions L x W x H in. 45 x 21 x 26, Product Type Cover. Rugged vinyl coated woven polyester construction Holds up to adverse conditions Fits only older Champion Elite models with exhaust coming out of middle on the top Item# 628519 fits newer Champion Elite units with exhaust coming out towards the back Model Number: 770619. Age Group: Adult.
More

Welders 2-Axis Welders Angle...

$59.99
Northern Tool Welders 2-Axis Welders Angle Clamps - 4 Inch Capacity, Brown, Northern Industrial
+ $17.49 shipping
/welders-2axis-welders/qsGdT7Jckc-szMV0m6t08w==/info
Northern Tool
IN_STOCK ( In stock )
These Northern Industrial Welders 2-Axis Welders Angle Clamps are heavy-duty cast iron vises that allow two items of different diameter to be joined at a 90 angle. Great for quick, easy set-ups for welding or assembling projects. Slotted base holes for easy mounting copper plated screws withstand weld spatter. Pieces qty. 1, Dimensions L x W x H in. 13 x 13 x 3 1/2, Jaw Length in. 5, Length in. 13, Opening in. 4, Finish Type Painted, Material Cast iron, Throat Depth in. 2 3/8, Product Style Welding angle clamp. 2 3/8in. throat depth 4in. max. opening width 5in. jaw length Model Number: 2205S029. Age Group: Adult.
More

5 023 Clarke Mig Welder...

$7.90
eBay 5 023 Clarke Mig Welder Contact Tips 100e Parts We6542
+ $3.50 shipping
/5-023-clarke-mig-welder/aftPcp4qBCBZhZXEhl0LRA==/info
eBay
IN_STOCK ( In stock )
HTP Contact Tips size .023, Clarke P/N WE 6542. These tips fit the Clarke 100E-MK2 Wire feed welder and any other Clarke welder which uses contact tips matching the dimensions in the photo. These tips are small and hard to find. They are about 3/4 long and 3/16 in diameter. ***Save on shipping by combining purchases of select MIG, TIG, or Plasma parts. However,you must pay for all items with one combined payment for this shipping discount. Separate payments for each item are not eligible for
More

5 035 Clarke Mig Welder...

$7.90
eBay 5 035 Clarke Mig Welder Contact Tips 100e Parts We6539
+ $3.50 shipping
/5-035-clarke-mig-welder/ehsW7u-9ZSxv87HKZcRKyw==/info
eBay
IN_STOCK ( In stock )
5 HTP Contact Tips size .035, Clarke P/N WE 6539. These tips fit the Clarke 100E-MK2 Wire feed welder and any other Clarke welder which uses contact tips matching the dimensions in the photo.These tips are small and hard to find. They are about 3/4 long and 3/16 in diameter. ***Save on shipping by combining purchases of select MIG, TIG, or Plasma parts. However,you must pay for all items with one combined payment for this shipping discount. Separate payments for each item are not eligible for
More

9 Ft Gas Hose For Clarke...

$9.00
eBay 9 Ft Gas Hose For Clarke Welders 4mm Od
+ $6.95 shipping
/9-ft-gas-hose-for-clarke/8MqORlRqnLBdnLbw-SIi9w==/info
eBay
IN_STOCK ( In stock )
Clear gas hose found smaller Mig welders such as HTP Mig 130, Clarke 130en, and some Chicago Electric welders. The OD is 4mm. This is the gas hose that goes from the back of your machine up through the mig gun and provides your shielding gas.You are bidding on a 9 foot section.Call us if you would like a longer section at $1 each additional foot.Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over 30 years all we have sold are quality welding suppli
More

Welders 11 Inch Locking...

$24.99
Northern Tool Welders 11 Inch Locking C-Clamps - 5-Piece Set, Northern Industrial
+ $9.49 shipping
/welders-11-inch-locking/M9px3lWGD0IG-sEPlsLADg==/info
Northern Tool
IN_STOCK ( In stock )
Set of 5 Northern Industrial Welders locking C-clamps is great for welding or shop projects. Jaw Capacity in. 3 1/4, Pieces qty. 5, Storage Type None, Jaw Type C-clamping, Material Type Carbon steel, Tool Length in. 11. Made of drop-forged and hardened carbon steel Nickel plated Quick-release levers Model Number: 164999. Age Group: Adult.
More

Clarke Mig Welder 6 Position...

$69.95
eBay Clarke Mig Welder 6 Position Heat Selector Switch Parts
No Shipping Info
/clarke-mig-welder-6/c9Z7aSIv0Uv6MiVL53Xr9A==/info
eBay
IN_STOCK ( In stock )
This fits the following models.- 165 EMK2 - 170 TURBO - 185 TURBO - 165 TURBO GAS NO GAS - 190 TURBO - 220 TURBO - 175 TE - 195 TE - 205 TE - 230 TE Clarke is in bankruptucy, so you might want to stock up on these Clarke parts. If you have a Clarke Welder, and need parts which we do not have listed on e-bay - send us an e-mail and we might be able to help you out. Since this is an electrical part, there are no returns on this part. ***Save on shipping by combining purchases of select MIG, TIG,
More

Hobart Welder Running Gear...

$189.99
Northern Tool Hobart Welder Running Gear Wheel Kit - Fits Hobart Champion Elite, Model 300997
+ $22.49 shipping
/hobart-welder-running/UZbLEqi3TXoNCn0TaSTNZg==/info
Northern Tool
IN_STOCK ( In stock )
This Hobart Welder Running Gear Wheel Kit is a heavy-duty running gear wheel kit designed specially to bolt into the existing holes on the Hobart Champion Elite welder/generator Item#s 26167 and 42542, sold separately. Includes mounting hardware. Assembly required. Dimensions L x W x H in. 31 x 22 x 5, Fits Select Hobart welders, Product Type Wheel kit. 13in. rear tires with inner tubes and welded hubs combine with 6in. front rubber swivel casters to add mobility on the jobsite or in the shop 31in.L x 22in.W x 5in.H heavy-duty steel frame designed for use with the Hobart Champion Elite welder/generator Item#s 26167 and 42542, sold separately Heavy-duty ergonomic handle provides easy steering Model Number: 300997. Size: 31 Inch. Age Group: Adult.
More

Welders Magnetic MIG Gun...

$9.99
Northern Tool Welders Magnetic MIG Gun Holder - 2 3/4 Inch Magnet, Blue, Northern Industrial
+ $7.49 shipping
/welders-magnetic-mig-gun/VKHt4ZXa7sryWzZ7ad9RLA==/info
Northern Tool
IN_STOCK ( In stock )
This Northern Industrial Welders Magnetic MIG Gun Holder features a powerful 2 3/4in. magnet that clamps to the workbench or side of welder, securing the MIG torch when not in use. Works in vertical or horizontal position and has durable enamel finish with zinc-coated base. Color Brass/Blue, Material Type Metal, Product Type Gun holder, Works With MIG gun. Model Number: QJ6028. Age Group: Adult.
More

Hobart Handler 190...

$699.99
Northern Tool Hobart Handler 190 Flux-Core/MIG Welder - 230V, 190 Amp, Model 500554
Free Shipping
/hobart-handler-190/7JxqxlaHbKnWrF8nMfr73g==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The Hobart Handler 190 Flux-Core/MIG Welder is a powerful and portable wire-feed flux core and MIG welder designed to weld mild steel, flux core steel, aluminum and stainless steel. The generous operating parameters allow you to weld 24 ga. to 5/16 in. steel in single pass. Plus it is extremely versatile and perfect for the welder who wants to work on auto body, household repairs, or even heavier farm projects requiring extra power. With an arsenal of standard features such as 7 output voltage settings and a dual-groove quick change drive roll, the Handler 190 is as versatile as it is powerful. Connect the optional Spoolrunner 100 item #20868 to make welding aluminum easier than ever before. Features Hobart's 5/3/1 industrial warranty protection. Amps 130A at 21.5V DC, Cart No, Clamp... Less
More

Urethane Supply Company...

$79.99
Northern Tool Urethane Supply Company Replacement Heating Element - Use with EZ-Weld 2.0 Hot Air Welder, Model 6062ME
+ $5.99 shipping
/urethane-supply-company/Fxw9tT1JQywE8EwSZT1rxA==/info
Northern Tool
IN_STOCK ( In stock )
This Urethane Supply Company replacement heating element provides easy replacement for the EZ-Weld 2.0 hot air welder. Stainless barrel with nickel chrome heating element in ceramic core. Rated for 550 Watts installs in seconds. U.S.A. Watts 550, Color Chrome, Compatible With EZ-weld 2.0 hot air welder, Material Type Stainless/nickel with a ceramic core, Single, Pair, or System Single, Typical Application Plastic welder accessory, Volts 0. Model Number: 6062ME. Age Group: Adult.
More

Welder Wheel Kit - K761

$16.36
Sears Parts Direct Welder Wheel Kit - K761
+ $7.99 shipping
/welder-wheel-kit-k761/OYAnBoQO1eznURhM8bs3SA==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved wheel kit (part number K761) is for welders.Wheel kit K761 provides the parts needed to add wheels to the welder frame to make the welder easier to move. The kit may include multiple parts; refer to your parts diagram for a comp
More

Welders Light/Medium- Duty...

$27.99
Northern Tool Welders Light/Medium- Duty Welding Cutting Torch and Tip Kit - 4 Piece Set, Northern Industrial
+ $5.99 shipping
/welders-lightmediumduty/bk6QvaFiXAkEaGa4-ff5yQ==/info
Northern Tool
IN_STOCK ( In stock )
Northern Industrial Welders Light/Medium- Duty Welding Cutting Torch and Tip Kit is designed for light- and medium-duty Victor-style gas welding torches. Cuts Up To in. 1 1/2, Welds Up To in. 1/8, Single, Pair, or System System, Typical Application Welding/cutting, Product Type Tip, Tip Type #0, #2, Works With Victor-style gas welding torch. Two 3-101 style #0 and #2 cutting tips for cutting 3/8in.-1 1/2in. steel Two Type 13 style #0 and #2 welding tips with mixers for welding 1/32in.-1/8in. steel. Model Number: VMCW. Size: 4. Age Group: Adult.
More

3 Mig Weld Gas Nozzles Clarke...

$18.00
eBay 3 Mig Weld Gas Nozzles Clarke Welder Parts Welding
+ $6.95 shipping
/3-mig-weld-gas-nozzles/ndaE5EXLbLSlitPImV2Irg==/info
eBay
IN_STOCK ( In stock )
You are bidding on 3 HTP Gas Nozzles even though there is only one in the picture. These nozzles fit the following Clarke Welders: WE 6480A Fluxcore 95 Wire Feed Welder WE 6510 130EMK2 Mig Gas Only Welder WE 6523 130EN Mig/Fluxcore Welder WE 6524 180EN Mig/Fluxcore Welder WE 6526 125EN If in doubt, please measure your nozzle and compare to the picture. These nozzles are 2 1/4 long, are 13/16 in diameter, and thread is an M11x 1.5. If these nozzles fit your model, but your model is not listed,
More

Welders Flow Gauge MIG/TIG...

$39.99
Northern Tool Welders Flow Gauge MIG/TIG Regulator - Argon or Argon/CO2, 2 Inch Diameter, Northern Industrial
+ $6.99 shipping
/welders-flow-gauge/CZe1uny89-waBJOq1ZWKqQ==/info
Northern Tool
IN_STOCK ( In stock )
This Northern Industrial Welders Flow Gauge MIG/TIG Regulator is designed for MIG or TIG welding with Argon, CO2 or a mixture of the 2 gasses. Features a CGA580 inlet fitting for easy connection to insert gas cylinders. Welding Processes MIG, TIG, Compatible With Argon, CO2, mixture of both, Diameter in. 2, Max. PSI 4,000. Dual easy-to-read 2in. gauges with machined brass bodies allow you to quickly monitor shielding gas level and flow Side entry connection with 5/8in. x 18 threaded female outlet connection point For use with portable MIG and TIG welders Model Number: NTE 314-30CF-AR/CO2. Age Group: Adult.
More

Hobart IronMan 230...

$1,799.99
Northern Tool Hobart IronMan 230 Flux-Core/MIG Welder with Hobart DP 3545-20 20-Ft. Spoolgun - 230V, 250 Amp, Model 500536001
Free Shipping
/hobart-ironman-230/_Cd7zn6GRZTsIai6fEkfvQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
This exceptional value pairs the Hobart Ironman 230 MIG Welder with a Hobart DP 3545-20 20-ft. spoolgun, resulting in one powerful welding package You get both 15ft., 200 AMP MIG gun and a 20ft., 200 AMP spoolgun with this offer. Whether you are a professional or just want to weld like one, the IronMan 230 delivers 30 to 250 amps of pure power in a heavy duty cabinet. The arc is optimized to deliver a flawless weld, making spatter and post-weld cleanup almost nonexistent. This full-size MIG platform is equipped with many outstanding features and includes a 15ft., 200 Amp welding gun, delivering professional- grade arc-quality, voltage control and duty cycle for a great value. This outstanding package also includes the Hobart Direct Connect 20-Ft. Spoolgun Item #916461, making MIG welding... Less
More

5 030 Clarke Mig Welder...

$7.90
eBay 5 030 Clarke Mig Welder Contact Tips 100e Parts We6543
+ $3.50 shipping
/5-030-clarke-mig-welder/jtofXsv1jWPrkd7J-xAECA==/info
eBay
IN_STOCK ( In stock )
If you want a shipping discount on multiple items, buy the items you want, BUT do not pay for any items until AFTER we send you the invoice. The invoice will be in your “My E-bay” “Buying” “Won” area. Separate payments for each item by PayPal CANNOT be combine for discounted shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping.We cannot refund shipping charges once payment(s) have
More

Welders Medium-Duty Cutting...

$209.99
Northern Tool Welders Medium-Duty Cutting and Welding Outfit with Tote - Oxyacetylene Victor-Style, 11-Piece Set, Northern Industrial
+ $13.99 shipping
/welders-mediumduty/A_YeIgLjCiqMfYlKzF68eg==/info
Northern Tool
IN_STOCK ( In stock )
This Northern Industrial Welders Medium-Duty Cutting and Welding Outfit with Tote includes a torch handle, cutting attachment, rear entry oxygen and acetylene regulators, along with 12.5-ft., 3/16in. twin line hose and #0 welding and #0 cutting tips, all in an easy-to-carry tote with waterproof storage compartment. Cylinders not included. Cuts Up To in. 4, Degree of Angle 90, Hose Length ft. 12 1/2, Regulator Included Yes, oxygen and acetylene, Tip Type #0 cutting tip #0 welding tip, Welds Up To in. 3/8, Product Type Torch kit, Typical Application Welding/cutting, Single, Pair, or System System. Medium-duty Victor-style light is easy to service Lightweight, easy-to-use all-in-one kit - Cylinders not included Capable of cutting metal up to 4in. thick welds up to 1/2in. metal with optional... Less
More

Welder Wire Feed Motor -...

$102.46
Sears Parts Direct Welder Wire Feed Motor - 880-406-001
+ $12.99 shipping
/welder-wire-feed-motor/aT9SYA9910ne5l97t7GgMw==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Pricing Subject to Change. Welder Wire Feed Motor
More

Welders Medium-Duty Cutting...

$154.99
Northern Tool Welders Medium-Duty Cutting and Welding Outfit - Oxyacetylene Victor-Style, 11-Piece Set, Northern Industrial
+ $8.99 shipping
/welders-mediumduty/-dPFtzWRMabkRmzW2OIhIQ==/info
Northern Tool
IN_STOCK ( In stock )
Northern Industrial Welders Medium-Duty Cutting and Welding Outfit is perfect for welding, cutting, gouging, and heating. Degree of Angle 45, Cuts Up To in. 1/2 with #0 tip 2 1/2 with optional #3 tip, Hose Length ft. 12 1/2, Regulator Included Yes, Tool Length in. 14 welding with tip 16 1/2 with cutting attachment, Welds Up To in. 5/64 with #0 tip 1/2 with optional #5 tip, Works With Oxyacetylene, Product Type Torch kit, Single, Pair, or System System, Typical Application Welding/cutting, Tip Type 0 welding, 1 cutting. Torch handle/check valves Cutting attachment Fuel and oxygen regulators 12 1/2 feet of Grade R 3/16in. twin line hose for oxygen and fuel gas Also includes goggles, striker and tip cleaner Compatible with Victor 3-101 series cutting tips Model Number: 15826236. Age Group:... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443