Category

Optics Accessories
Showing results for "chipmunk scope"
Results 1 - 40 of 1500+

Scope Rug 6'

$329.00
CB2 Scope Rug 6'
+ $32.90 shipping
/scope-rug-6/IPd_LKC4SUIEX3mD66pU_A==/info
CB2
BACK_ORDER ( Back-Order )
Scope Rug 6'.
More

Sinclair Scope Alignment Tool

$69.99
Brownells Sinclair Scope Alignment Tool
+ $7.95 shipping
/sinclair-scope-alignment/RNPreda6fDaIjGRpDVgKjw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Our Scope Ring Alignment Tool will enable any shooter to properly align and install both 30mm and one inch scope rings from any manufacturer in any style. Use the Alignment Tool before lapping, to align the scope tube in the rings. This Alignment tool goes beyond the traditional pointed rod style tools in that the alignment rods are adjustable within the two tool bodies after the bodies are mounted in the scope rings - no more loosening the rings several times to adjust the rod point lengths. The rods are held in the tool bodies by precision machined collets which exactly center anodized aluminum with cylinder sizes to fit 1 inch rings and 30mm rings. This tool is easy to use, and makes c Mfg: Sinclair International
More

Wheeler 1 Scope Mount Kit...

$87.34
Walmart.com Wheeler 1 Scope Mount Kit 540-127
Free Shipping
/wheeler-1-scope-mount-kit/umesii63zXvJrpaSJiIsIQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Wheeler Professional Scope Mounting Kit should become the standard practice whenever a scope is installed on a quality firearm.
More

Orion Scope Cloak - 12-16...

$162.83
Orion Telescopes Orion Scope Cloak - 12-16 Dobsonians
+ $9.95 shipping
/orion-scope-cloak-1216/8-lLNpuVRsVYRIzRgd90qw==/info
Orion Telescopes
IN_STOCK ( In stock )
The Orion Scope Cloak Telescope Cover is an affordable and easy to use telescope cover that protects your equipment from dust, dirt, dew, and sunlight. Large aperture Dobsonian reflector telescopes of 12 to 16 aperture can easily be kept clean and tidy with this Scope Cloak. Keep your telescope set-up and ready for viewing in your garage, shed, or home observatory without worrying about dust and dirt contamination. Orion's Scope Cloak is made of a high-tech tear-resistant and water-resistant material that keeps your optics free of dew. The highly reflective exterior surface rejects solar radiation, keeping your telescope cool when left in sunlight and reduces cool-down time (the amount of time required for your telescope to reach thermal equilibrium after nightfall). The Scope Cloak... Less
More

M1A / M14 Receiver Scope Mount

$39.99
Sportsman's Guide M1A / M14 Receiver Scope Mount
+ $9.99 shipping
/m1a-m14-receiver-scope/KzcfUCk8h8MFMpEjph2L_w==/info
Sportsman's Guide
IN_STOCK ( In stock )
Rugged M1A / M14 Receiver Scope Mount. Secure your optics! This must-have Mount still allows for use with iron sights.1-Pc. design, machined from solid aluminum Top rail locks into the charger guide dovetail Adjustable mounting bolt provides a solid foundation Built to accept Picatinny or Weaver style scope rings Black anodized finish. No gunsmithing required. Order Up ONLINE!
More

Sinclair Scope Alignment Tool

$69.99
Brownells Sinclair Scope Alignment Tool
+ $7.95 shipping
/sinclair-scope-alignment/Yj3gKj5opwvry4tZZrCV8w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Our Scope Ring Alignment Tool will enable any shooter to properly align and install both 30mm and one inch scope rings from any manufacturer in any style. Use the Alignment Tool before lapping, to align the scope tube in the rings. This Alignment tool goes beyond the traditional pointed rod style tools in that the alignment rods are adjustable within the two tool bodies after the bodies are mounted in the scope rings - no more loosening the rings several times to adjust the rod point lengths. The rods are held in the tool bodies by precision machined collets which exactly center anodized aluminum with cylinder sizes to fit 1 inch rings and 30mm rings. This tool is easy to use, and makes c Mfg: Sinclair International
More

Leupold Flip-Back Scope Lens...

$49.99
Cabela's Leupold Flip-Back Scope Lens Caps (40MM OBJECTIVE)
+ $8.95 shipping
/leupold-flipback-scope/aPbcPJdozfXj_vEUq0L_mQ==/info
Cabela's
IN_STOCK ( In stock )
Experience vastly superior optical quality Leupold Flip-Back Caps protect your scope from damage and the elements. Machined from extremely strong 6061-T6 aluminum, the Alumina flip-back covers screw directly onto most post-Jan. 2005, threaded Leupold scopes for a secure fit. High-strength neodymium magnets keep the covers securely closed until youre ready to flip them open. Low-profile open position stores the cap along the scope. Per each. Available: 32-33mm objective 40mm objective 50mm objective 34mm ocular (Standard Riflescope) Size: 40MM OBJECTIVE. Type: Lens Cap. Sports and Outdoors > Sport and Outdoor
More

Orion Guide Scope Ring...

$26.25
Orion Telescopes Orion Guide Scope Ring Mounting Bar
+ $9.95 shipping
/orion-guide-scope-ring/cTxZ6UYgjW63j_3dhYCINA==/info
Orion Telescopes
IN_STOCK ( In stock )
Rigid, 16 long anodized aluminum bar for coupling guide scope and guide scope rings to a telescope. Multiple holes allow guide scope rings to be positioned for short or long-tube guide scopes. Pre-drilled through-holes allow easy attachment to SkyView Pro, Sirius and Atlas telescopes and mounts.
More

Leupold Flip-Back Scope Lens...

$49.99
Cabela's Leupold Flip-Back Scope Lens Caps (50MM OBJECTIVE)
+ $8.95 shipping
/leupold-flipback-scope/iWXLLZhVJ8sSSG84s5tT-A==/info
Cabela's
IN_STOCK ( In stock )
Experience vastly superior optical quality Leupold Flip-Back Caps protect your scope from damage and the elements. Machined from extremely strong 6061-T6 aluminum, the Alumina flip-back covers screw directly onto most post-Jan. 2005, threaded Leupold scopes for a secure fit. High-strength neodymium magnets keep the covers securely closed until youre ready to flip them open. Low-profile open position stores the cap along the scope. Per each. Available: 32-33mm objective 40mm objective 50mm objective 34mm ocular (Standard Riflescope) Size: 50MM OBJECTIVE. Type: Lens Cap. Sports and Outdoors > Sport and Outdoor
More

Picatinny Scope Base -...

$49.97
Brownells Picatinny Scope Base - Aluminum Scope Base Fits Savage Model 110 La R/T
+ $7.95 shipping
/picatinny-scope-base/gCCvtcx3dlg4t6hbr87aig==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

1'''' Scope Ring, 3b, Low,...

$35.68
Brownells 1'''' Scope Ring, 3b, Low, Blue - 1'''' Scope Ring, 4b, Medium, Blue
+ $7.95 shipping
/1-scope-ring-3b/rWPoHx64zckxTUniqhkh4Q==/info
Brownells
IN_STOCK ( In stock )
Store not rated
High-quality Ruger factory rings install easily and provide solid, zero-movement scope attachment to Ruger rifles and handguns with integral bases, No. 1 rifles with factory base, and No. 3 rifles with special factory bases available separately. Low, Medium, High, and Extra-High heights in blued carbon steel, natural stainless steel, or stainless with Ruger's proprietary matte Target Grey finish. Mfg: Ruger SPECS: Carbon steel, polished blue finish (BL), stainless steel, natural (SS), or Target Grey (TG) finish. Ring heights measured from top of base to bottom of scope tube. Low - .325. Medium (Med.) - .435. High - .565. Extra-High (X-High) - .680. Offset Ring availa
More

9x50 Orion Illuminated Finder...

$87.21
Orion Telescopes 9x50 Orion Illuminated Finder Scope with Bracket
+ $9.95 shipping
/9x50-orion-illuminated/EKddheb8d0O28EKRwSwN7g==/info
Orion Telescopes
IN_STOCK ( In stock )
The crosshairs in standard finder scopes are difficult to see in the dark, which makes centering an object something of a guessing game. Well, we saw the light, and we now offer finder scopes with illuminated crosshairs. An adjustable- intensity red LED in the illuminator arm lights an etched-glass double crosshair reticle, making it as easy as target practice to center your viewing or photo subject or guide star. Centering an object precisely on the finder scope's crosshairs will ensure that it appears in your main scope's eyepiece or on your camera's CCD chip, exactly where you want it.
More

Leupold Flip-Back Scope Lens...

$49.99
Cabela's Leupold Flip-Back Scope Lens Caps (STANDARD EYEPIECE)
+ $8.95 shipping
/leupold-flipback-scope/YuE74CF25vqka43Ej6oHag==/info
Cabela's
IN_STOCK ( In stock )
Experience vastly superior optical quality Leupold Flip-Back Caps protect your scope from damage and the elements. Machined from extremely strong 6061-T6 aluminum, the Alumina flip-back covers screw directly onto most post-Jan. 2005, threaded Leupold scopes for a secure fit. High-strength neodymium magnets keep the covers securely closed until youre ready to flip them open. Low-profile open position stores the cap along the scope. Per each. Available: 32-33mm objective 40mm objective 50mm objective 34mm ocular (Standard Riflescope) Size: STANDARD EYEPIECE. Type: Lens Cap. Sports and Outdoors > Sport and Outdoor
More

High Standard Scope Mount -...

$29.95
Brownells High Standard Scope Mount - Black Lsp Scope Mount
+ $7.95 shipping
/high-standard-scope-mount/wQUuAJsRfqiwKEiOLnx-Sg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The scope and the barrel become one unit to effectively cancel small shifts in zero between the receiver and the barrel for increased accuracy. Thirteen cross-slots provide a wide range of mounting positions; cantilever design centers the weight over the grip for better balance. Cutaway over the receiver allows sufficient scope height for proper functioning and ejection. Fits all factory bull barrels; Weaver-style rings. Mfg: Lsp SPECS: Aluminum, matte finish, black, anodized. 5-1/4 (13.3cm) long. Fits LSP Match Barrels; factory bull barrels require drilling and tapping. Includes instructions and screws.
More

Scope Tube Fast Fire Mount -...

$53.20
UnbeatableSale, Inc. Scope Tube Fast Fire Mount - 30mm
+ $7.99 shipping
/scope-tube-fast-fire/D9hvQiAmXUUCjr6rPbhTOg==/info
UnbeatableSale, Inc.
IN_STOCK ( In stock )
Scope Tube Fast Fire Mount - 30mm. Manufacture ID: 410338. Every tactical operator needs options when it comes to mounting accessories. Now you can position a FastFire secondary optic in nearly any radial position on your primary optic. The Scope Tube FastFire Mount allows your primary optic to remain on a higher magnification while quickly switching to the FastFire sight for ultra-fast close quarters target engagement. Its also great for long-range target acquisition and weapon alignment to then be engaged with your high power primary optic. Size: 30mm. Finish: Matte
More

Orion Deluxe Mini 50mm Guide...

$161.99
Orion Telescopes Orion Deluxe Mini 50mm Guide Scope with Helical Focuser
+ $9.95 shipping
/orion-deluxe-mini-50mm/l5frcM9YS4PuORcLXGYioA==/info
Orion Telescopes
IN_STOCK ( In stock )
Our conveniently compact Deluxe Mini 50mm Guide Scope features a helical fine-focus mechanism to allow for faster, more precise focusing of potential guide stars. This Deluxe version of our popular Mini 50mm Guide Scope is designed for use with the Orion StarShoot AutoGuider (sold separately) or similar small-chip CCD autoguider devices. The Orion Mini 50mm Guide Scope is ideal for guiding long-exposure astrophotographs with imaging telescopes up to 1500mm in focal length. The Deluxe Mini 50mm Guide Scope's machined and anodized helical focuser has a fixed- orientation design that will not rotate the installed StarShoot AutoGuider or similar device during focus adjustments. The helical focuser simply moves the attached autoguider in or out while maintaining its set orientation... Less
More

Leupold Flip-Back Scope Lens...

$49.99
Cabela's Leupold Flip-Back Scope Lens Caps (32-33MM OBJECTIVE)
+ $8.95 shipping
/leupold-flipback-scope/c9GIZiv0amfF075ro224Ng==/info
Cabela's
IN_STOCK ( In stock )
Experience vastly superior optical quality Leupold Flip-Back Caps protect your scope from damage and the elements. Machined from extremely strong 6061-T6 aluminum, the Alumina flip-back covers screw directly onto most post-Jan. 2005, threaded Leupold scopes for a secure fit. High-strength neodymium magnets keep the covers securely closed until youre ready to flip them open. Low-profile open position stores the cap along the scope. Per each. Available: 32-33mm objective 40mm objective 50mm objective 34mm ocular (Standard Riflescope) Size: 32-33MM OBJECTIVE. Type: Lens Cap. Sports and Outdoors > Sport and Outdoor
More

Orion Polar Alignment Scope...

$173.39
Orion Telescopes Orion Polar Alignment Scope for HDX110 EQ-G Mount
+ $9.95 shipping
/orion-polar-alignment/w-gMFAC7axNSMoGWsRpwZQ==/info
Orion Telescopes
IN_STOCK ( In stock )
Align your Orion HDX110 EQ-G GoTo Mount quickly and accurately with this heavy-duty Polar Axis Finder Scope. Polar alignment is required for any equatorial mount to track celestial objects properly, and precise alignment is vital if you wish to capture high-quality astrophotos. This Polar Axis Finder Scope makes it easy to align your mount so you can enjoy peak performance every night. While the HDX110 EQ-G Mount can be polar-aligned using a software- assisted routine, many users prefer the convenience of a dedicated polar axis finder scope. This external polar alignment solution allows you to align your HDX110 Mount more quickly than software- assisted methods, and it's delightfully easy to use. Just attach the Polar Axis Finder Scope to the Orion HDX110 Mount using the included... Less
More

Ak-47 Scope Mount

$94.99
Brownells Ak-47 Scope Mount
+ $7.95 shipping
/ak47-scope-mount/bk6dSKwNnbIkj17ToMd-kg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Style 1 - For AK type rifles that have original gas tubes without side gas port holes. Lightweight, aluminum mount replaces the gas tube to maintain scope alignment and improves stability to prevent shifting zero. Clamps solidly to barrel. Weaver-style base sets below the line of sight, no need to remove mount to use iron sights. Issue sights can be viewed directly through the red dot and reflex scopes. Does not fit the Yugo M-70 AK-47. Mfg: Ultimak SPECS: 6061-T6 Aluminum, black, matte finish. 6-7/8 (17.5cm) long. 6.7 oz. (189 g) wt. Fits all 7.62x39 caliber rifles that have original gas tubes without side gas port holes. Installation may require minor inletting to handguard.
More

Scope Riser - Scope Mount...

$32.80
Brownells Scope Riser - Scope Mount Assembly
+ $7.95 shipping
/scope-riser-scope-mount/-rvhAV798FeFZdp6CSxwhg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Features: Picatinny scope riser Raises optics and mounts one half inch Mounts to any Picatinny rail Made from aircraft quality aluminum Hardcoat anodized to military specifications 5-1/4 in length Mfg: Yankee Hill Machine Co., Inc. Aluminum, Hardcoat anodized matte black. Length 5-1/4. Raises equipment 0.5.
More

Tactical Scope Rings - 1''''...

$43.99
Brownells Tactical Scope Rings - 1'''' Tactical Rings, High
+ $7.95 shipping
/tactical-scope-rings/0QkIKcir-bistD17RJi0gg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Oversized rings provide extra contact area for ultra-secure mounting of large optics on hard-recoiling, long-range rifles such as sniper rifles. Fits all Weaver-style bases. Six no-strip, no-slip Torx screws hold down the ring cap to ensure the scope keeps its position even under heavy recoil. Oversize hex nuts allow quick removal or attachment of optics in dynamic situations. Mfg: Weaver SPECS: Aluminum, hardcoat anodized, matte black. Height measured from top of base to underside of scope body. 1 High - .400 high. Accepts scopes with objectives up to 44mm dia. 1 Extra High - .525 high. Accepts objectives up to 50mm dia. 30mm High - .495 high. Accepts o
More

Tsr 7075 Aluminum Scope Rings...

$69.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 1'''' Medium
+ $7.95 shipping
/tsr-7075-aluminum-scope/4BZdNLvCcglOzbIHqLwzEw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Tactical Solutions Picatinny...

$89.99
Cabela's Tactical Solutions Picatinny Scope Base
+ $12.95 shipping
/tactical-solutions/7gziS-T2RSlp1lHqB063sw==/info
Cabela's
IN_STOCK ( In stock )
Complete the upgrade of your Browning Buckmark pistol with a Picatinny rail scope/accessory mounting base. Designed for use on Trail-Lite barrels as well as all Buck Marks. Its easy to install and Includes an integral, adjustable rear sight so you can switch from open sights to add-on optics and back quickly. Constructed of lightweight 6061-T6 aluminum. Type: Sights. Sports and Outdoors > Sport and Outdoor
More

Tsr 7075 Aluminum Scope Rings...

$69.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 1'''' Low
+ $7.95 shipping
/tsr-7075-aluminum-scope/CI2qnylbkHR1ouE3ziqh_g==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Picatinny Scope Base -...

$49.99
Brownells Picatinny Scope Base - Aluminum Scope Base Fits Mauser 98
+ $7.95 shipping
/picatinny-scope-base/EQT3SpergYupqqwHqaj2Wg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Orion 9x50 Solar Finder Scope

$108.20
Orion Telescopes Orion 9x50 Solar Finder Scope
+ $9.95 shipping
/orion-9x50-solar-finder/lxsVnMrtkQq6ihmlbhllfA==/info
Orion Telescopes
IN_STOCK ( In stock )
This 9x50 Solar Finder Scope fits most Orion telescope right out of the box, making it easy to to safely aim your solar filter-equipped telescope at the Sun with welcome accuracy. With its black-polymer film solar filter, 9x magnification, big 50mm objective lens, correct-image view, and a comfortable right-angle eyepiece, the 9x50 Solar Finder Scope is a must-have for Sun observers. Believe it or not, the Sun can be difficult to center in a telescope equipped with a solar filter. By installing the Orion 9x50 Solar Finder Scope, you can precisely aim your protected telescope at our nearest star to obtain nicely centered views of sunspots, eclipses, and more.
More

Lightweight Tactical Scope...

$39.99
Brownells Lightweight Tactical Scope Mounts - Savage Round Back Short Action 0 Moa
+ $7.95 shipping
/lightweight-tactical/IVpjBniWu5ASWffqKn85vw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction and in many cases will not obstruct usage of factory iron sights. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Hex-head mounting screws and Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum, anodized, matte black finish. Includes socket... Less
More

Colt Competition Cantilever...

$89.99
Sportsman's Guide Colt Competition Cantilever Scope Mount
+ $13.99 shipping
/colt-competition/EZT8G7XAP65uQ5Wq-AIokg==/info
Sportsman's Guide
IN_STOCK ( In stock )
Colt Competition Cantilever Scope Mount. Designed by the experts at Colt Competition for target-shooting supremacy. A secure, trustworthy platform to mount your best optics. Don't miss your mark: 6000-series aluminum alloy, black matte finish 1 rings Mounts to Picatinny rail. Order yours today!
More

Sinclair Scope Ring Lapping...

$49.99
Brownells Sinclair Scope Ring Lapping Kits - Sinclair 30mm Scope Ring Lapping Tool
+ $15.95 shipping
/sinclair-scope-ring/KxsjnXmwM7TYC0Gv3TAvTw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind,whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings. The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment. Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive a Mfg: Sinclair International
More

Orion Polar Alignment Scope...

$63.03
Orion Telescopes Orion Polar Alignment Scope for SkyView Pro/Atlas Mounts
+ $9.95 shipping
/orion-polar-alignment/xtGWZKtgNyUulrvP-uUxUw==/info
Orion Telescopes
IN_STOCK ( In stock )
The Polar-Axis finder Scope enables highly accurate polar alignment of the SkyView Pro equatorial mount. Accurate polar alignment is essential for precise tracking, especially at high powers, and for astrophotographic guiding. This accessory threads into the mount's housing along the Right Ascension axis. The optics feature a printed reticle that makes aligning on Polaris easy and fast. Includes complete instructions. Also compatible with Celestron CG-5 mount.
More

Tsr 7075 Aluminum Scope Rings...

$79.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 30mm Low
+ $7.95 shipping
/tsr-7075-aluminum-scope/MOVFydQ4Iad4ybs02q5wMg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Wheeler 305-172 Combo Scope...

$61.99
Walmart.com Wheeler 305-172 Combo Scope Kit
Free Shipping
/wheeler-305172-combo/A_rAeD0JfMi6lf0ohKU3Ag==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Wheeler Ring Alignment and Lapping Kit should become the standard practice whenever a scope is installed on a quality firearm.
More

Picatinny Scope Base -...

$49.99
Brownells Picatinny Scope Base - Aluminum Scope Base Fits Rem 700 Sa
+ $7.95 shipping
/picatinny-scope-base/Qqei4SazmBIltzG6VVuJUA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Rugged, one piece design provides a rock-solid base for scope rings with greater flexibility than traditional ring-and-base systems. Slots cut to true MIL-STD 1913 specs accept both Picatinny and many Weaver-style rings to increase your scope-mounting options on both tactical and sporting rifles. Easily alter the spacing between the rings to accommodate different-length scope bodies, and adjust eye relief to fit the specific needs of each shooter. Installs quickly using factory drilled scope base holes and screws''no drilling and tapping on most guns. Underside of base is cut out to accommodate receivers with right- or left-hand ejection ports. Choose between models precision machined from 41 Mfg: Brownells SPECS: Aluminum Models - 6061 T6 aluminum billet, hardcoat anodized matte black... Less
More

Enfield No. 4 & No. 5 -...

$75.99
Brownells Enfield No. 4 & No. 5 - Enfield Scope Mount
+ $7.95 shipping
/enfield-no-4-no-5/RkVFVo8PTVKhh9CeGb3v3w==/info
Brownells
IN_STOCK ( In stock )
Store not rated
No gunsmithing required to put a scope on that old Enfield No. 4 or 5. Quick detachable, Weaver-style base is machined to extremely close tolerances for precise return to zero. Attaches solidly to the receiver using the ejector and safety screws. Installation requires no bolt modification or rear sight removal. Leveling adjustments adapt mount to a wide range of receivers; windage adjustments help keep your scope reticle in the center of its range. Does not impair access to safety. Mfg: Dai Management SPECS: Aluminum, matte black. 3.9 (10cm) long.
More

Integral-Base Scope Mounts...

$75.94
UnbeatableSale, Inc. Integral-Base Scope Mounts 30mm Colt Logo
+ $7.99 shipping
/integralbase-scope/IrWMiMIpR2y7qEiiTuf2bQ==/info
UnbeatableSale, Inc.
IN_STOCK ( In stock )
Integral-Base Scope Mounts 30mm Colt Logo. Manufacture ID: 1430. Colt Cantilever scope mount with Colt logo. Made of 6000-series aluminum alloy. Industry standard 65 Inlb mounting system. For 30mm tubes. Specifications:. - Type: Scope Mount. - Model: Colt. - Size: 30mm. - Finish: Black. - Material: Aluminum. - Gun Type: Rifle. - Mount Type: Standard
More

Sinclair Scope Ring Lapping...

$49.99
Brownells Sinclair Scope Ring Lapping Kits - Sinclair 30mm Scope Ring Lapping Tool
+ $15.95 shipping
/sinclair-scope-ring/WfMzqZsrqm4HVkiWuXBZyw==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind,whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings. The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment. Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive a Mfg: Sinclair International
More

Tsr 7075 Aluminum Scope Rings...

$79.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 30mm Medium
+ $7.95 shipping
/tsr-7075-aluminum-scope/ZHmZkQCyF2TxibA3ukiQJA==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Tsr 7075 Aluminum Scope Rings...

$79.99
Brownells Tsr 7075 Aluminum Scope Rings - Tsr Aluminum Rings 30mm High
+ $7.95 shipping
/tsr-7075-aluminum-scope/byEmXr6VrpwA2kN4EpQBaQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR Series Rings, precisely machined from an aluminum billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: 7075-T651 Aluminum Alloy, matte black, hard anodized to Mil-A-8625 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - High: 1.225 (31.1mm).
More

Heavy Duty Scope Mounts -...

$69.99
Brownells Heavy Duty Scope Mounts - Rem. 700, 722, 40x Short Action 20 Moa Aluminum
+ $7.95 shipping
/heavy-duty-scope-mounts/d7U0Mf_J_rGJ5scn4muppg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum or hardened steel with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief, plus great flexibility in scope choice. Some models available with 20 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the gun's receiver. Accepts Picatinny or Weaver scope rings. Heavy Duty mounts are .100 lower than the Lightweight mounts to minimize weight and keep your optic closer to the barrel centerline for improved acc Mfg: Egw SPECS: Heavy Duty - 7075 T6 aluminum, mil-spec hardcoat anodized, or 4140 chrome-moly steel... Less
More

Tsr-W Steel Alloy Scope Rings...

$79.99
Brownells Tsr-W Steel Alloy Scope Rings - Tsr ''''w'''' Series Steel Rings 30mm Medium
+ $7.95 shipping
/tsrw-steel-alloy-scope/f1AEY54OlvdIckKB5BeFwg==/info
Brownells
IN_STOCK ( In stock )
Store not rated
TSR W Series Rings, precisely machined from an alloy steel billet, with tolerances held to .0002, give maximum scope/ring contact. Holds scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Radiused edges and corners help prevent snagging while providing attractive appearance. Large, clamp-nut lets you torque rings to Weaver-style or Mil-STD 1913 (Picatinny) bases. Mfg: Tps Products, Llc. SPECS: Alloy Steel, black oxide finish to Mil-C-13924 standards. 5/8 (15.8mm) wide. Height measured from top of base to center of ring. 30mm - Low: .925 (23.5mm).
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2015 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe141.votf-27197
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe141.votf-27197