Showing results for "chicago electric 40 amp plasma cutter"
Results 1 - 40 of 951

Eastwood MIG Welder 175 Amp...

$949.99
Eastwood.com Eastwood MIG Welder 175 Amp Versa-Cut Plasma Cutter 40 13946
+ $77.40 shipping
/eastwood-mig-welder-175/aXIpcy8a1xOeOR25jTLdIQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa-Cut Plasma Cutter! Click on the individual links below for all the specs, but you must click the Add To Cart button above to get the special savings over individual prices! Eastwood's 220v MIG 175 Welder uses its 175-amp output to handle almost any welding job, and comes with a spool gun for aluminum, stainless and steel. MIG welder welds mild and stainless steel, 24-ga. to 5/16Welds aluminum, 14-ga. to 1/430-175-amp welding range The Eastwood Versa Cut 40 Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8 thick. 110v or 220v AC input with inverter technology20' torch cable; 10' ground cable with clampRated 40-amp output
More

Chicago Electric Inverter...

$429.95
eBay Chicago Electric Inverter Plasma Cutter 40amp 240v 62204
Free Shipping
/chicago-electric-inverter/_oC-hIOdZNPpERJ-1q5CMA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Brand New Chicago Electric Welding 240 Volt Inverter Plasma Cutter w/ Digital Display - MSRP $1,091.99:This is one of the easiest air plasma cutter units you'll ever use to cut cast iron, steel, stainless steel, copper, brass, aluminum, titanium and magnesium alloys. The plasma cutter features a pilot arc-striking system that allows easy starts and an indicator light for thermal overload protection. This powerful plasma welder includes an easy carry handle for portability to the jobsite and bac
More

Tomahawk Lincoln Plasma...

Free Shipping
3 stores Tomahawk Lincoln Plasma Cutter with Air Compressor (K28071)
More

Chicago Electric Inverter...

$450.00
eBay Chicago Electric Inverter Plasma Cutter 40amp 240v 62204
Free Shipping
/chicago-electric-inverter/kxJ782ehLzMtw-tsFZ2NRQ==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Chicago Electric Welding 240 Volt Inverter Plasma Cutter w/ Digital Display - MSRP $1,091.99: This is one of the easiest air plasma cutter units you'll ever use to cut cast iron, steel, stainless steel, copper, brass, aluminum, titanium and magnesium alloys. The plasma cutter features a pilot arc-striking system that allows easy starts and an indicator light for thermal overload protection. This powerful plasma welder includes an easy carry handle for portability to the jobsite and back to the
More

Eastwood Versa-Cut 40 Plasma...

$549.99
Eastwood.com Eastwood Versa-Cut 40 Plasma Cutter 12740
+ $21.60 shipping
/eastwood-versacut-40/_izKGeI6uNGDt-zEnBRZDQ==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Versa-Cut 40 Plasma Cutter easily slices through materials up to 3/8 thick. Works with 110v or 220v AC input 20' torch cable; 10' ground cable with clamp Rated 40-amp output Backed by Eastwood's no-hassle 3-year warranty Our Eastwood- designed plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 3/8. Compared to mechanical cutting, our Versa-Cut 40 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. Inverter technology offers superior arc stability and plasma cutting power using either 110 or 220 volts, making this a portable unit that is also light weight. A built-in pilot arc system allows for instant arc striking and ease of use when cutting... Less
More

Eastwood Versa-Cut 60 Plasma...

$679.99
Eastwood.com Eastwood Versa-Cut 60 Plasma Cutter 14099
+ $27.00 shipping
/eastwood-versacut-60/myTrdA_rz8s-h37ew9fXbA==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Versa-Cut 60 Plasma Cutter easily slices through materials up to 7/8 thick. 220v AC input 20' torch cable; 10' ground cable with clamp Rated 60-amp output Backed by Eastwood's no-hassle 3-year warranty Our Eastwood- designed portable plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8. Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results. The Versa-Cut 60 requires a... Less
More

10pc 30 Amp Tip & Electrode...

$38.99
eBay 10pc 30 Amp Tip & Electrode Chicago Electric 62204 Plasma Cutter Ipt-40 Torch
Free Shipping
/10pc-30-amp-tip/Co90lpT9L19Wis-_ulLxVA==/info
eBay
IN_STOCK ( In stock )
Free Shipping
THIS IS A BRAND NEW ITEM FOR THE HARBOR FREIGHT 62204 PLASMA CUTTER WITH THE IPT- 40 TORCH WITH THE BACK STRIKING PILOT ARC TORCH SYSTEM A 10 PIECE 30 AMP SET 5 ELECTRODES AND 5 TIPS THE CHROME PLATING ON THE TIPS HELP THEM TO LAST LONGER THEN THE COPPER TIPS THESE WILL ALSO FIT THE PT- 60 TORCH AS WELL AS PLASMA CUTTERS WITH THE BACK STRIKING PILOT ARC TORCH SYSTEM PLEASE NOTE DON'T BE FOOLED INTO BUYING THE S45 CONSUMABLES FOR YOUR IPT-40 TORCH USED ON THE HARBOR FREIGHT 62204 PLASMA CUTTER
More

Lincoln Tomahawk 375 K2806-1...

Free Shipping
3 stores Lincoln Tomahawk 375 K2806-1 Plasma Cutters
Anywhere, Anytime The Tomahawk® 375 Air plasma cutting system arrives ready to go for fast and...
More

Eastwood Versa Cut 20 Plasma...

$399.99
Eastwood.com Eastwood Versa Cut 20 Plasma Cutter 20062
+ $19.95 shipping
/eastwood-versa-cut-20/6IoMzRYSAgImqFSN7uAQCg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Cut Quickly, Cleanly with Precision Designed especially for cutting automotive sheet metal with speed and accuracy. Minimal air requirements, only 3 CFM @ as low as 30 PSI High precision 0.65mm cutting tip provides a narrow cut with minimal slag. Eliminates the need to weld-prep panels for welding Delivers a powerful 15 Amps of output to cut up to 1/8? thick metal Compact case is easy to pick up and carry. Weighs less than 20lbs Operates anywhere on standard 110V current This is the Plasma Cutter to have for cutting out rusted floors, body panels and more. Perfect for trimming new panels and cutting up to 1/8? thick stock. Specifications: Input: 110 VAC Output: 15 Amps Duty Cycle: 40% @ 15 Amps Torch: Trafiment S25K Torch Tip: 0.65 mm Max Cut: 1/8 Minimal Air Requirements: 3 CFM... Less
More

Metal Man Handy Cut 40 Plasma...

$1,099.99
Sears Metal Man Handy Cut 40 Plasma Cutter
Free Shipping
/metal-man-handy-cut-40/8fLp5AxG-orT9tjV9bwD0Q==/info
Sears
IN_STOCK ( In stock )
Free Shipping
This Handy Cut 40 Plasma Cutter Delivers Versatile Service Powerful and portable, this Metal Man handy cut 40 plasma cutter cuts 3/8 inch mild and ¼ stainless steel clean and efficiently. Featuring a long 18.5 foot TRAFIMET torch it gives you the reach you need for continuous plate cutting, while the powerful ground clamp locks in place delivering steady power you can count on. Featuring an integrated pressure regulator, it’s easier to transport than others, while machined connectors ensure solid hook-ups to your compressor. Lightweight yet tough, the handy cut 40 plasma cutter is equipped with enamel protected surfaces that resist rust, while the plastic front and back make it more resilient. Complete with amperage controls and a high visibility pressure dial, it’s designed for precision... Less
More

Chicago Electric Welding...

$44.54
eBay Chicago Electric Welding Systems 5 Piece Plasma Cutting Tips
Free Shipping
/chicago-electric-welding/zFFkMa1MM-1flqac3CCsqw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Chicago Electric Welding Systems 5 Piece Plasma Cutting Tips CLICK TO ENLARGE Chicago Electric Welding Systems 5 Piece Plasma Cutting Tips DESCRIPTION This is a brand new: Chicago Electric Welding Systems 5 Piece Plasma Cutting Tips Tips for your plasma cutter These plasma cutter tips are designed for use with our 230 Volt, 40 Amp Plasma Cutter. The - Visit Harbor Freight Tools For More Information. - 0.029 opening - Polished copper finish - For use with the 230 volt, 40 amp plasma cutter; Thi
More

5 Original Trafimet...

$22.99
eBay 5 Original Trafimet Pd0116-0.9 Plasma Cutter Pipe Tips 40 Amp S25 To S45 Torch
Free Shipping
/5-original-trafimet/QBM3yxVlbBm0YSCdJHuqZg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
HERE ARE 5 ORIGINAL TRAFIMET PD0116-0.9 PIPE TIPS . THESE FIT ALL PLASMA CUTTERS WITH THE S25, S25K, S30,S35 AND S45 TORCH. THEY FIT THE CHICAGO ELECTRIC#60767 #95136, #97994, #91814, CRAFTSMAN, NORTHEN TOOL #275, #375, SCHUMACHER, SUMMIT, BUFFALO, EVERLAST, RAZORWELD 45 AND OTHER PLASMA CUTTERS WITH THE TRAFIMET TORCH THEY WORK BEST FROM 35 TO 45 AMPS NEED TRAFIMET TORCH PARTS EMAIL ME To learn more about this and other items I have for sale on ebay go to www. georgesplasmacutt ershop.com Thank
More

Smarter Tools 40 Amp DC...

$999.99
Sears Smarter Tools 40 Amp DC Inverter Plasma Cutter
Free Shipping
/smarter-tools-40-amp-dc/PjCeeq9cjIAOQLidrB0xfw==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The CUT-40 has a Cutting Range of 15 – 40 Amps. With a 30% at 40 Amp rated duty cycle the CUT-40 cuts mild Steel, brass, stainless steel, copper and aluminum. Includes: Trafimet Ergo Cut S45/Torch with 18.5 ft. cable, 10 ft. work clamp and cable, pressure gauge and adjustment, spare consumables and a shoulder strap. Input Voltage and Hertz: 230 Volt/60 Hz. Number of phases: 1. Thermal overload protection. Stepless Adjustment for Material Thickness. Dimensions: 17.5 in. x 5.5 in. x 11.3 in. Weight: 21 lbs.
More

Eastwood Versa-Cut 40 Plasma...

$19.99
Eastwood.com Eastwood Versa-Cut 40 Plasma Cutter Cover 20619
+ $6.95 shipping
/eastwood-versacut-40/riPJZLzVJdkVSPEbh4olkw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Fabric cover for your Eastwood Versa-Cut 40 Plasma Cutter. This cover protects your plasma cutter from dust and debris. Washable fabric is tear and mold resistant.
More

Campbell Hausfeld WK250000AV...

$599.99
CPO Outlets Campbell Hausfeld WK250000AV 13 Amp Plasma Cutter
Free Shipping
/campbell-hausfeld/8mSQ7XFPkGp80sM5xgQPiQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
13 Amp Plasma Cutter - WK250000AV. 13 ft. Torch. 10 ft. Work Lead. 10 ft. Power Cord. Insulated Clamp. Nozzle. Inverter technology cuts easily through mild and stainless steel, aluminum, copper and brass. Convenient 120V power input works with standard 20 Amp household outlets. Built-in regulator and gauge for inbound compressed air. Professional torch with contact striking pilot arc provides distortion proof cutting. Thermal overload protects plasma cutter by automatically shutting off to avoid overheating. Error indicator light turns on when any portion of the system is not connected properly. Note: Required compressor of at least 1.25 CFM @ 40 PSI
More

Electrodes for Eastwood Versa...

$22.86
Eastwood.com Electrodes for Eastwood Versa Cut 40 Plasma Cutter - 10pc. 12812
+ $6.95 shipping
/electrodes-for-eastwood/05g_dlE0UcymKjif3YK7Ig==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
This is a set of replacement electrodes for Eastwood's Versa Cut 40 Plasma Cutter. Includes 10 pieces.
More

Sealed Chicago Electric...

$550.00
eBay Sealed Chicago Electric Plasma Cutter Digital Display 62204
Free Shipping
/sealed-chicago-electric/HydZ-DFfZo_CXSKdDP8k3Q==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Brand New In The Box.Chicago Electric Plasma Cutter with digital display.This is one of the easiest air plasma cutter units you'll ever use to cut cast iron, steel, stainless steel, copper, brass, aluminum, titanium and magnesium alloys. The plasma cutter features a pilot arc-striking system that allows easy starts and an indicator light for thermal overload protection. This powerful plasma welder includes an easy carry handle for portability to the jobsite and back to the shop or garage.Intern
More

Eastwood Versa Cut 40 Plasma...

$17.48
Eastwood.com Eastwood Versa Cut 40 Plasma Cutter Adapter Cord 12816
+ $6.95 shipping
/eastwood-versa-cut-40/IOIfYad_OdWGwHC-ZJqOWg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Replacement adapter cord for Eastwood's Versa Cut 40 Plasma Cutter. (110/220V, NEMA50R Receptacle.)
More

Klutch Plasma 375i Plasma...

$664.99
Northern Tool Klutch Plasma 375i Plasma Cutter - 230V, 40 Amps
Free Shipping
/klutch-plasma-375i-plasma/QmUBl61-lE1FZmbF3PgaKg==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The Klutch Plasma 375i Plasma Cutter is a lightweight unit that features powerful inverter technology for smooth cutting. Handles almost any project you can throw at it, from mild steel to copper, brass, stainless and aluminum up to 3/8in. Cuts faster and more precise with a thinner kerf and less slag than cutting with oxy fuel. A smaller heat-affected zone also causes less warping. No gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about, ever. Cutting Thickness in. 3/8 mild steel, 1/4 stainless steel, aluminum, 1/8 copper, brass, Duty Cycle 35 at 40A, Plasma Gas Flow/Pressure 4.5 CFM at 60 PSI required, Cart No, Clamp Cable Length ft. 10 ground cable, 18 1/2 torch/torch cable, Dimensions L x W x H in. 17 x 6 1/2 x 12 1/2, Pilot Arc Yes, Power... Less
More

Chicago Electric Plasma...

$14.95
eBay Chicago Electric Plasma Cutter Safety Nozzle Cap Part
+ $3.50 shipping
/chicago-electric-plasma/okFQXLq4qDQ5bA7jvtsJEA==/info
eBay
IN_STOCK ( In stock )
If you want a shipping discount on multiple items, buy the items you want, BUT do not pay for any items until AFTER we send you the invoice. The invoice will be in your “My E-bay” “Buying” “Won” area. Separate payments for each item by PayPal CANNOT be combine for discounted shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping.We cannot refund shipping charges once payment(s) have
More

Forney 700P Plasma Cutter,...

$1,599.99
Sears Forney 700P Plasma Cutter, 230V/120V, 40A
Free Shipping
/forney-700p-plasma/dI5Yp5Abg75B1rWSMuz7Ow==/info
Sears
IN_STOCK ( In stock )
Free Shipping
Applications: Sheet metal to plate cutting Auto Body Farm & Ranch HVAC Plumbing Contractor General Fabrication High output: Dual input 230V (50A) or 120V (20A) High output of 40A max Improved design: Integrated consumable storage Integrated air pressure regulator and dryer Removable torch, ground cable and clamp for easy repairs Torch wrap for storage Drag torch technology Larger work envelope: 15’ power cable, ground cable and torch lead Versatility: Portable and generator friendly 2 consumable kits for either maximum performance or maximum versatility Rated Output: 20A - 40A Plate Thickness Range: Cutting thickness recommended: 1/2 and up to 3/4 Dimensions: 199.5x16.5 Weight: 48 lbs. 5/3/1 Warranty
More

Eastwood Versa-Cut 60 Plasma...

$19.99
Eastwood.com Eastwood Versa-Cut 60 Plasma Cutter Cover 20620
+ $6.95 shipping
/eastwood-versacut-60/9lly-TzVN577V2ZX6nszPw==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
Fabric cover for your Eastwood Versa-Cut 60 Plasma Cutter. This cover protects your plasma cutter from dust and debris. Washable fabric is tear and mold resistant.
More

Plasma Cutter Owner's Manual...

$9.00
Sears Parts Direct Plasma Cutter Owner's Manual - IB-205070
+ $7.99 shipping
/plasma-cutter-owners/4sUD1n-hHPhyy-RmHsXCwQ==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
This manufacturer- approved owner's manual (part number IB-205070) is for plasma cutters.Owner's manual IB-205070 includes use and care instructions, the manufacturer's warranty and basic troubleshooting information.
More

Forney Plasma Cutter 115FI...

$949.99
Sears Forney Plasma Cutter 115FI with Built-In Compressor 120-Volt
Free Shipping
/forney-plasma-cutter/IDxgyUdoW3fTMVBG4nEfuw==/info
Sears
IN_STOCK ( In stock )
Free Shipping
The Forney 317 FI 1 15 120V plasma cutter has a built in air compressor. Our plasma cutter uses electrical arc and compressed air to cut steel, aluminum and other conductive metals. Drag torch technology allows you to move (drag) torch directly across the metal surface for more precise cuts. This unit is easy to use and operate with thermal overload for protection. Post flow air cooling for longer life. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm & ranch and do-it-yourself markets. For more information, visit www.forneyind.com. If you've got metal working questions, we've got answers. Please contact our customer service team at... Less
More

Chicago Electric Plasma...

$14.95
eBay Chicago Electric Plasma Cutter Swirl Ring Parts Torch
+ $3.50 shipping
/chicago-electric-plasma/gum5oYh6m8FR2i-HC6qjZA==/info
eBay
IN_STOCK ( In stock )
If you want a shipping discount on multiple items, buy the items you want, BUT do not pay for any items until AFTER we send you the invoice. The invoice will be in your “My E-bay” “Buying” “Won” area. Separate payments for each item by PayPal CANNOT be combine for discounted shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping.We cannot refund shipping charges once payment(s) have
More

Thoroughbred PLASMAPONY...

$599.99
Northern Tool Thoroughbred PLASMAPONY Plasma Cutter With Multi-Voltage Plug - 115/220V, 40 Amp, Model TB-PP40
+ $15.99 shipping
/thoroughbred-plasmapony/PEfbXE_FkYBkvcsITfK4-g==/info
Northern Tool
IN_STOCK ( In stock )
The compact, portable Thoroughbred PLASMAPONY Plasma Cutter With Multi-Voltage Plug is a 40 Amp, professional grade ready-to-cut system that can cut through mild steel up to 3/8in. thick. Ideal for home hobbyists or light industrial fabrication projects. For use with 220V or 115V power with included adapter. 60 Duty Cycle @ 40 Amps. Sever Thickness in. 3/8 mild steel 1/4 stainless steel and aluminum, Amps 40, Duty Cycle 60 at 40A, Plasma Gas Flow/Pressure 4-5 CFM at 60 PSI, Cart No, Clamp Cable Length ft. 12, Power Cord ft. 6, Dimensions L x W x H in. 18 x 9 x 12, Cutting Thickness in. 3/8, Pilot Arc Yes, Volts 115/220. Delivers precise, clean cuts with no pre-heating necessary Unique design dissipates heat to reduce heat distortion of the metals you are cutting Easily removes spot welds... Less
More

Campbell Hausfeld WK250000AV...

$599.99
Tyler Tool Campbell Hausfeld WK250000AV 13 Amp Plasma Cutter
Free Shipping
/campbell-hausfeld/oCMgiBYkzhnOMHZno1olcw==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
13 Amp Plasma Cutter - WK250000AV. 13 ft. Torch. 10 ft. Work Lead. 10 ft. Power Cord. Insulated Clamp. Nozzle. Inverter technology cuts easily through mild and stainless steel, aluminum, copper and brass. Convenient 120V power input works with standard 20 Amp household outlets. Built-in regulator and gauge for inbound compressed air. Professional torch with contact striking pilot arc provides distortion proof cutting. Thermal overload protects plasma cutter by automatically shutting off to avoid overheating. Error indicator light turns on when any portion of the system is not connected properly. Note: Required compressor of at least 1.25 CFM @ 40 PSI
More

Klutch Plasma 275i Plasma...

$474.99
Northern Tool Klutch Plasma 275i Plasma Cutter - 115V, 20 Amps
Free Shipping
/klutch-plasma-275i-plasma/dnPjSyhaTUuRjx5BBeG8pg==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The Klutch Plasma 275i Plasma Cutter features powerful, yet lightweight inverter technology for smooth cutting. Handles almost any project you can throw at it, from mild steel to copper, brass, stainless and aluminum up to 5/32in. Cuts faster and more precise with a thinner kerf and less slag than cutting with oxy fuel. A smaller heat-affected zone also causes less warping. No gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about, ever. Clamp Cable Length ft. 10 ground cable 18 1/2 torch/torch cable, Duty Cycle 50 at 16A, Plasma Gas Flow/Pressure 4.5 CFM at 65 PSI required, Amps 20, Cart No, Cutting Thickness in. Up to 5/32, Dimensions L x W x H in. 17 x 13 x 7, Pilot Arc Yes, Power Cord ft. 6 1/2, Volts 115. Increased power in a super... Less
More

Eastwood Versa Cut 40 & 60...

$19.99
Eastwood.com Eastwood Versa Cut 40 & 60 Plasma Cutter Nozzles 12814
+ $6.95 shipping
/eastwood-versa-cut-40/w4uSTugq2mrqaKtOtuMlzg==/info
Eastwood.com
IN_STOCK ( In stock )
Store not rated
This is a set of replacement Nozzles for Eastwood's Versa Cut 40 & 60 Plasma cutters. 1.0mm Diameter Long Life Tip (CB50/70). Includes 10 pieces.
More

Pack Of 5 Harbor Freight...

$15.99
eBay Pack Of 5 Harbor Freight Plasma Cutter Electrode Part 62772 Chicago Electric
Free Shipping
/pack-of-5-harbor-freight/VrYizq1a3izTA-QZkJrWzg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
BRAND NEW, FACTORY SEALED SET OF 5 PLASMA ELECTRODES (ONE PACK OF 5 ELECTRODES) CONSTRUCTED FROM COPPER CHROME PLATED AND POLISHED CHICAGO ELECTRIC WELDING SYSTEM ITEM:62772 WORKS WITH ALL HARBOR FREIGHT PLASMA CUTTERS
More

40pcs Air Plasma Cutter...

$14.70
Banggood 40pcs Air Plasma Cutter Cutting Consumables Extend Fit PT-31 LG-40 Torch CUT-40 50-Machinery Parts
Free Shipping
/40pcs-air-plasma-cutter/kp2SMMZFEA-SKfyDKA3XSg==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 40pcs Air Plasma Cutter Cutting Consumables Extend Fit PT-31 LG-40 Torch CUT-40 50 Specification: Color: Rose golden+white Material: metal+ceramics Fit for: PT-31 LG-40 Torch CUT-40 50 Sizes: Ceamic nozzles: Total length 30mm, bottom inner diameter about 19mm, inner diameter on the top about 9mm Vortex rings: Total length 5mm, inner diameter about 5mm Nozzles: Total length 15mm, bottom inner about 5mm, bottom outside about 11mm. Electrodes: Total length 39mm, shank diameter about 3.5mm. Package included: 10pcs ceamic nozzles 10pcs vortex rings 10pcs nozzles 10pcs electrodes More Details:
More

Hobart AirForce 40i Plasma...

$1,599.99
Northern Tool Hobart AirForce 40i Plasma Cutter - 230V, 40 Amps, Model #500566
Free Shipping
/hobart-airforce-40i/2y6RmhgcnexbQ3T0CWGnJA==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The Hobart Air Force 40i Plasma Cutter is an economical plasma cutting system for all conductive metals. With new XT series torches, new longer life XT consumables, and the newly added Pilot Arc Controller feature, you'll appreciate the enhanced performance. It can cut mild steel up to 7/8in. This portable unit features a lightweight, powerful inverter design and an ergonomic trigger safety, with more efficient air consumption and economically priced consumables. Plasma cutters cut faster and more precisely with a thinner kerf and less slag than cutting with oxy fuel. A smaller heat-affected zone also causes less warping. And you'll never have gas pressure settings, flame tuning, metal preheating, or gas cylinders or refills to worry about. Features Hobart's 5/3/1 limited warranty... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe148.2015.sp24.rm.reviews-30335