Century Electric Motor Home and Garden - Shopping.com
Showing results for "century electric motor"
Results 1 - 40 of 1500+

TranzSporter TP400 - 400lb...

$2,059.99
BuyMBS.com TranzSporter TP400 - 400lb. 28ft. Ladder Hoist - Electric Motor
Free Shipping
/tranzsporter-tp400/3gs-kwoi9o3Fg-N1sGkRsA==/info
BuyMBS.com
IN_STOCK ( In stock )
Store not rated
Free Shipping
When hauling shingles to install on a roof of any house, the time taken along with the risks can cause lots of worry. Even manual powered shingle lifts can be hard to use and take advantage of. The TranzSporter Ladder Lift System eliminates the safety risks of carrying up shingles or having to rent pricey lifts to get your items to where they need to be. The speed and ease allows for immense time and cost savings, and can pay itself off very quickly. The lift system assembles very easily and can lift 400lbs. easily. The foot pedal and handle brake controls allow for simple use while the safety mechanisms prevent the lift from falling of the ladder track. The TP400 is unlike any other TranzSporter lift because of its incredibly light weight, over 30% less than previous models.Features
More

A.O. Smith C695 1 HP, 1725...

Free Shipping
2 stores A.O. Smith C695 1 HP, 1725 RPM, 208-230/115 Volts, 56Z Frame, ODP Enclosure, Ball Bearing Capacitor ... (786674016713)
Rigid base high start torque motor. Open drip-proof. Reversible. 60 Hz. 1725 RPM. 208-230/115 V....
More

A.O. Smith Electrical C521 1...

Free Shipping
2 stores A.O. Smith Electrical C521 1 2 HP Electric Motor
More

Electric Motor 1 2 Hp 1725...

Free Shipping
2 stores Electric Motor 1 2 Hp 1725 Rpm By A.O. Smith Electrical
More

Century C520 Electric Motor 3...

Free Shipping
2 stores Century C520 Electric Motor 3 4Hp Hi Tor Start Motors
START MOTORS Enclosed rigid base, reversible motor. Ideal for compressors, conveyors, machine...
More

Century C639 Electric Motor

$222.02
Essential Hardware Century C639 Electric Motor
Free Shipping
/century-c639-electric/LK35gI2ds1UJ2vcjuu1UYw==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
Free Shipping
This rigid base, high start torque motor has an open-drip proof and is reversibleIt is ideal for compressors, pumps, milking machines, conveyors, blowers and fans60 Hz230/115 volts5.0/10.0 full load amps, 17
More

Industrial Air IV5076055 5 HP...

$1,149.99
CPO Outlets Industrial Air IV5076055 5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter)
Free Shipping
/industrial-air-iv5076055/kGEIcIb21m50JRYXNMdNvQ==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter) - IV5076055. Industrial performance delivers maximum CFM @ 175 PSI, provides enough power to operate more than one air tool or device at one time. Patented pump design provides for a cooler running and low RPM pump for longer overall tool life. Industrial style air intake filter. Electric motor with thermal overload protection protects the motor from fluctuations. Large capacity, 60 gallon ASME air receiver with a 3/4 in. air outlet port. Equipped with tank pressure gauge and on/off switch. Easily accessible oil level sight glass and oil drain with 4 in. extension
More

Dewalt DXCMV5076055 5 HP 60...

$1,149.99
CPO Outlets Dewalt DXCMV5076055 5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter)
Free Shipping
/dewalt-dxcmv5076055-5-hp/14ajbJZsqGlFtGpMHCo-1Q==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter) - DXCMV5076055. Industrial performance delivers maximum CFM @ 175 PSI could provide enough power to operate more than one air tool or device at one time. Low-speed pump for longer life and less maintenance. Patented pump design provides for a cooler running pump, also featuring low pump RPM for longer life. Easily accessible oil level sight glass and oil drain with 4 in. extension. Electric motor with thermal overload protection: protects the motor from voltage fluctuations; magnetic starter not required. Large capacity, 60 gallon ASME certified air receiver with a 1/4 in. air outlet port. Equipped with tank pressure gauge and on/off switch
More

Industrial Air IV5076055 5 HP...

$1,149.99
Tyler Tool Industrial Air IV5076055 5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter)
Free Shipping
/industrial-air-iv5076055/boKpwHoCF3LIrvbRmw_C4w==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter) - IV5076055. Industrial performance delivers maximum CFM @ 175 PSI, provides enough power to operate more than one air tool or device at one time. Patented pump design provides for a cooler running and low RPM pump for longer overall tool life. Industrial style air intake filter. Electric motor with thermal overload protection protects the motor from fluctuations. Large capacity, 60 gallon ASME air receiver with a 3/4 in. air outlet port. Equipped with tank pressure gauge and on/off switch. Easily accessible oil level sight glass and oil drain with 4 in. extension
More

Century C620 Hi Torque...

$281.80
Essential Hardware Century C620 Hi Torque Electric Motor
Free Shipping
/century-c620-hi-torque/OCzRu-g5qEpfNUPLM--e5Q==/info
Essential Hardware
IN_STOCK ( In stock )
Store not rated
Free Shipping
This electric motor Hi Tor has an enclosed rigid base with reversible motorIt is ideal for compressors, conveyors, machine tools, pumps, air conditioning, air circulation fans, evaporative coolers and home workshops40- degrees
More

AO Smith A.O. Smith GF2024...

Free Shipping
2 stores AO Smith A.O. Smith GF2024 1/4 hp, 1725 RPM, 115 volts, 48/56 Frame, ODP, Sleeve Bearing Belt Drive Blower Mo... (786674021762)
Resilient base motor for belt drive and blower applications Ideal for centrifugal pumps, blowers...
More

Dewalt DXCMV5076055 5 HP 60...

$1,149.99
Tyler Tool Dewalt DXCMV5076055 5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter)
Free Shipping
/dewalt-dxcmv5076055-5-hp/iM-fMrCPtsLgWdgU5B9FwQ==/info
Tyler Tool
IN_STOCK ( In stock )
Free Shipping
5 HP 60 Gallon Two-Stage Air Compressor with Century Motor (No Mag Starter) - DXCMV5076055. Industrial performance delivers maximum CFM @ 175 PSI could provide enough power to operate more than one air tool or device at one time. Low-speed pump for longer life and less maintenance. Patented pump design provides for a cooler running pump, also featuring low pump RPM for longer life. Easily accessible oil level sight glass and oil drain with 4 in. extension. Electric motor with thermal overload protection: protects the motor from voltage fluctuations; magnetic starter not required. Large capacity, 60 gallon ASME certified air receiver with a 1/4 in. air outlet port. Equipped with tank pressure gauge and on/off switch
More

Leeson Contractor Power Tools...

$359.99
Northern Tool Leeson Contractor Power Tools Electric Motor - 3/4 HP, 3600 RPM, 115/208-230 Volts, Single Phase, Model 101782
+ $17.49 shipping
/leeson-contractor-power/4xcy7rYO55NbMnDmhG7RPg==/info
Northern Tool
IN_STOCK ( In stock )
The 3/4 HP Leeson Contractor Power Tools Electric Motor is a powerful single-phase motor specially designed for woodworking applications that require a double-shafted motor. UL listed. CSA certified. Capacitor Start Yes, CSA Yes, Frame Type 48Z, Auto Overload Protection No, Capacitor Run Yes, Open Drip Proof Housing No, Hertz 60, HP 3/4, Manual Overload Protection No, Rotation Direction Selective CCW, Shank Diameter in. 1/2, Shank Length in. 1 1/2, Resilient Base No, Reversible No, Rigid Base Yes, Totally Enclosed Housing Yes, UL Yes, Amps 4.9, Rated RPM 3,600, Volts 115/208-230, Motor Phases Single. Double shaft design Electronic starting switch for quick and easy starts High starting and breakdown torques Open drip-proof ODP housing allows for venting and prevents drops of liquid from... Less
More

Marathon Electric (H451) GE...

$179.99
IsoPure Water Marathon Electric (H451) GE NEMA 48YZ Clamp-on Carbonator Motors, 1-Phase, 1/4 HP; 230V
+ $5.99 shipping
/marathon-electric-h451/jBU4GR01mSr-X6Kysv_Kig==/info
IsoPure Water
IN_STOCK ( In stock )
Store not rated
More

Marathon Electric (H450 /...

$194.99
IsoPure Water Marathon Electric (H450 / 4805) GE NEMA 48YZ Clamp-on Carbonator motors, 1-Phase, 1/3 HP; 230V
+ $5.99 shipping
/marathon-electric-h450/k_ykw3LT55SAWGxqDFQVnw==/info
IsoPure Water
IN_STOCK ( In stock )
Store not rated
More

Leeson Contractor Power Tools...

$399.99
Northern Tool Leeson Contractor Power Tools Electric Motor - 1 HP, 3600 RPM, 115/208-230 Volts, Single Phase, Model 114216
+ $20.49 shipping
/leeson-contractor-power/IXhdCwS9X7KBaw7uIWFkCw==/info
Northern Tool
IN_STOCK ( In stock )
The 1 HP Leeson Contractor Power Tools Electric Motor is a powerful single-phase motor specially designed for woodworking applications that require a double-shafted motor. UL listed. CSA certified. HP 1, Manual Overload Protection No, Shank Diameter in. 5/8, Totally Enclosed Housing Yes, Reversible Yes, Rigid Base Yes, Rotation Direction Reversible, Amps 6, Rated RPM 3,600, Volts 115/208-230, CSA Yes, Frame Type 56Z, Hertz 60, Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, Open Drip Proof Housing No, Resilient Base No, UL Yes, Shank Length in. 1 7/8, Motor Phases Single. Electronic starting switch for quick and easy starts High starting and breakdown torques Open drip-proof ODP housing allows for venting and prevents drops of liquid from falling into the motor Rigid... Less
More

Honda Marine BFP10 9.9 HP...

$3,147.00
Max Tool Honda Marine BFP10 9.9 HP Electric Start Engine Power Thrust Engine 25 Outboard Motor - B
Free Shipping
/honda-marine-bfp10-99-hp/RLee9LMrxVKsKqpyEIRDtw==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Honda Marine BFP10 9.9 HP Electric Start Engine Power Thrust Engine 25 Outboard Motor Honda Marine BFP10 9.9 HP Electric Start Engine Power Thrust Engine 25 Outboard Motor
More

Marathon Electric (HG684) GE...

$194.99
IsoPure Water Marathon Electric (HG684) GE NEMA 48YZ Clamp-on Carbonator Motors, 1-Phase, 1/2 HP; 100-120/240V
+ $5.99 shipping
/marathon-electric-hg684/t0WZddMFiKtfImYx-JtQBw==/info
IsoPure Water
IN_STOCK ( In stock )
Store not rated
More

Honda Marine BF10 9.9 HP...

$2,943.00
Max Tool Honda Marine BF10 9.9 HP Electric Start Engine 20 Gas Powered Outboard Motor - BF10DK3LHS
Free Shipping
/honda-marine-bf10-99-hp/wKee5NXTB0de3DuENWxA_g==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Honda Marine BF10 9.9 HP Electric Start Engine 20 Gas Powered Outboard Motor Honda Marine BF10 9.9 HP Electric Start Engine 20 Gas Powered Outboard Motor
More

Leeson Reversible Electric...

$479.99
Northern Tool Leeson Reversible Electric Motor - 2 HP, 3450 RPM, 230 Volts, Single Phase, Model 110363
+ $24.49 shipping
/leeson-reversible/J0L_vVgypELiPbjPvnfDCA==/info
Northern Tool
IN_STOCK ( In stock )
This Leeson Reversible Electric Motor produces 2 HP and 3450 RPM. For use where water and dust exposure is minimal. Ideally suited for use on pumps, compressors, blowers, fans and other standard industrial applications. U.S.A. Amps 12 at 230V, Frame Type NEMA 56, Rated RPM 3,450, Reversible Yes, Shank Length in. 1 7/8, Motor Phases Single, Shank Diameter in. 5/8, Capacitor Start Yes, Rigid Base Yes, HP 2. Durable rolled steel construction Meets or exceeds NEMA service factors Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified Service Factor 1.15 5/8in shaft Model Number: 110363. Size: 2. Age Group: Adult.
More

Leeson Electric Motor - 1/2...

$269.99
Northern Tool Leeson Electric Motor - 1/2 HP, 1725 RPM, 115/208-230 Volts, Single Phase, Model 100002.00
+ $16.99 shipping
/leeson-electric-motor/oTWNWz8CaX67tHVJ98t-Fg==/info
Northern Tool
IN_STOCK ( In stock )
This Leeson single-phase, capacitor start, reversible motor is ideal for heavy starting loads as with compressors, pumps, air conditioning equipment, conveyors and other industrial and commercial devices where water and dust exposure is minimal. Open Drip Proof Housing Yes, Rated RPM 1,725, Reversible Yes, Hertz 60, HP 1/2, Shank Diameter in. 5/8, Auto Overload Protection Yes, Frame Type NEMA S56, Amps 8.8 at 110V, 4.4 at 230V, Motor Phases Single, Capacitor Start Yes, Volts 115/208-230, Rigid Base Yes, Rotation Direction Clockwise or counter clockwise, CSA Yes, UL Yes. Durable rolled steel construction NEMA design B performance Meets or exceeds NEMA service factors Double shielded ball bearings Continuous duty Thermally protected ratings UL recognized component listings and CSA certified... Less
More

Lincoln Electric Arc/Stick...

$184.99
Northern Tool Lincoln Electric Arc/Stick Welding Accessory Kit - Model K875
+ $9.99 shipping
/lincoln-electric/9kMlu1_rVhKzWGvF_zWJcA==/info
Northern Tool
IN_STOCK ( In stock )
The Lincoln Electric Arc/Stick Welding Accessory Kit features a range of welding accessories that are ideal for use with many Lincoln Electric stick, TIG and engine-driven welders. Product Style Helmet and cable, Product Type Accessory Package, Size 150 Amp, Works With 150 Amp, Cable Length ft. 15. Includes a 20ft. #6 electrode cable with lug, 15ft. #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and a sample pack of mild-steel electrodes Operates at 150 Amps Kit weighs only 9 lbs. Model Number: K875. Size: 15. Age Group: Adult.
More

Honda Marine BF10 9.9 HP...

$2,915.00
Max Tool Honda Marine BF10 9.9 HP Electric Start Engine 15 Gas Powered Outboard Motor - BF10DK3SHS
Free Shipping
/honda-marine-bf10-99-hp/zMwwvWXMtha9vC5vfJLlpA==/info
Max Tool
IN_STOCK ( In stock )
Free Shipping
Honda Marine BF10 9.9 HP Electric Start Engine 15 Gas Powered Outboard Motor Honda Marine BF10 9.9 HP Electric Start Engine 15 Gas Powered Outboard Motor
More

Leeson Contractor Power Saw...

$519.99
Northern Tool Leeson Contractor Power Saw Electric Motor - 1 1/2 HP, 3600 RPM, 115/230 Volts, Single Phase, Model 120925
+ $27.49 shipping
/leeson-contractor-power/PqZ2i1YB5K6rHqJrspaQdA==/info
Northern Tool
IN_STOCK ( In stock )
The 1 1/2 HP Leeson Contractor Power Saw Electric Motor is a powerful single-phase motor specially designed for use with woodworking equipment such as table saws with Delta UNISAW mounting. Can be used to replace Delta UNISAW motor #83-621. UL listed. CSA certified. Rated RPM 3,600, Amps 10, Capacitor Start Yes, CSA Yes, Frame Type 143Y, Auto Overload Protection No, Capacitor Run No, Open Drip Proof Housing No, Hertz 60, HP 1 1/2, Manual Overload Protection No, Rotation Direction Reversible, Shank Diameter in. 3/4, Resilient Base No, Reversible Yes, Rigid Base Special, Totally Enclosed Housing Yes, UL Yes, Volts 115/230, Shank Length in. 1 3/4, Motor Phases Single. Motor pivots on rod for belt tensioning Delta UNISAW mounting sytem Totally enclosed, fan-cooled TEFC housing has an external... Less
More

10Pairs Electric Power Tool...

$8.74
Walmart.com 10Pairs Electric Power Tool Spring Motor Carbon Brush 12x6x6mm for Angle Grinder
Free Shipping
/10pairs-electric-power/eI_Dk8eGSTMFJtlM5eqVuQ==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder. 
More

Lincoln Electric X-Tractor...

$3,199.99
Northern Tool Lincoln Electric X-Tractor 1GC Filter - 74 dBA, Model K652-1
Free Shipping
/lincoln-electric/Awhg6NLCUH-DswIHlDGP_A==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The Lincoln Electric X-Tractor 1GC Filter is a simple to configure, high efficiency, cleanable, portable polyester filter with 2 powerful motors. Perfect for light-duty welding use such as light fabrication, maintenance and construction applications. Hose Length ft. 8, Noise Level dB 74, Product Type Extraction unit, Dimensions W x D x H in. 26 3/4 x 15 3/4 x 13 3/8, Hose Diameter in. 1.75. Automatic start/stop current sensor provides extraction only when needed, extending motor life Uses a single fume gun or suction nozzle attachment 74 dBA low noise operation Filter is easily cleaned while still inside the machine for easy maintenance 12 ft. power cord for an extended reach Model Number: K652-1. Size: 12. Age Group: Adult.
More

CENTURY DRILL AND TOOL 22921...

$46.38
Walmart.com CENTURY DRILL AND TOOL 22921 Brite Drill Index,21 Pc Set G4078999
+ $5.00 shipping
/century-drill-and-tool/NG4MTbX01F5-L9K_FtWqjQ==/info
Walmart.com
IN_STOCK ( In stock )
CDAT1334Features: Material: Premium grade high speed steelUse for general purpose drilling in wood metal and plastic135 degree quick cut points are self-centering and penetrate faster with less pressureOffer 4 times life rating when compared to standard 118 Degree point drill bitsStraight shank fits all cordless drill electric drill motors and hand drills Includes:Set includes drill bits measuring 0.06''to 0.38'' by 64ths Dimensions:6'' H x 4.38'' W x 1.38'' D, 1.68 lbs
More

Leeson General Purpose...

$244.99
Northern Tool Leeson General Purpose Electric Motor -1 HP, 1800 RPM, 208-230/460V, 3 Phase, Model 110048
+ $18.49 shipping
/leeson-general-purpose/uj0-L9rTp4hx5jCSsPq-nA==/info
Northern Tool
IN_STOCK ( In stock )
The 1 HP Leeson General Purpose 3-Phase Electric Motor can be used in various applications such as pumps, conveyors, compressors, blowers, fans, and many other standard industrial applications. Perfect for applications that are continuous duty and where water and dust exposure is minimal. Meets or exceeds NEMA service factors. UL listed and CSA certified. HP 1, Motor Phases 3, CSA Yes, Frame Type 56C, Hertz 60, Shank Length in. 1.41, Totally Enclosed Housing Yes, UL Yes, Reversible Yes, Rotation Direction REV, Shank Diameter in. 5/8, Volts 208-230/460, Amps 3.8, Rated RPM 1,800. Double-shielded ball bearings for long life Reversible rotation direction adds versatility Continuous duty operation Durable rolled steel construction Totally enclosed, fan-cooled TEFC housing has an external fan... Less
More

Leeson Farm-Duty Electric...

$279.99
Northern Tool Leeson Farm-Duty Electric Motor - 1 HP, 1800 RPM, 115/208-230 Volts, Single Phase, Model 110088
+ $20.49 shipping
/leeson-farmduty-electric/zvK2aNAqtglrYwFyUCOh_A==/info
Northern Tool
IN_STOCK ( In stock )
Leeson Farm-Duty Electric Motor delivers high torque that's ideally suited for use on Farm/Ag equipment such as feeders, conveyors, fans, grain elevators, silo unloaders and other demanding farm duty equipment. For use where exposure to water, dust and dirt exists. U.S.A. Amps 7.0 at 230V, HP 1, Manual Overload Protection Yes, UL Yes, Volts 115/208-230, Shank Diameter in. 5/8, Totally Enclosed Housing Yes, Motor Phases Single, Rigid Base Yes, Frame Type 56, Hertz 60, CSA Yes, Capacitor Run No, Capacitor Start Yes, Rotation Direction CCW, Rated RPM 1,800. Gasketed capacitor housing and conduit boxes provide protection in all environments Double sealed ball bearings have operating temperature range of -20F to +350F, and special formulation to provide extra bearing protection and long life... Less
More

Ironton Compressor-Duty...

$159.99
Northern Tool Ironton Compressor-Duty Electric Motor - 3 HP, Model 119574.00
+ $10.49 shipping
/ironton-compressorduty/ycJeYk57mHXu_5VqrQEzSA==/info
Northern Tool
IN_STOCK ( In stock )
This Ironton Compressor-Duty Electric Motor with capacitor start design is ideal for use on compressors, pumps, pressure washers and other clean and dry applications that require a high starting torque. Features a drip-proof design to prevent water and other contaminants from entering the machine. Motor Phases Single, Shank Length in. 1 7/8, Amps 13.1/12.3, Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, CSA Yes, HP 3, Manual Overload Protection Yes, Frame Type M56, Hertz 60, Open Drip Proof Housing Yes, Rated RPM 3,450, Resilient Base No, Rigid Base Yes, Reversible Yes, Rotation Direction Counter clockwise, reversible, Shank Diameter in. 5/8, Totally Enclosed Housing No, UL No, Volts 208/230. Single phase motor with capacitor start Steel frame with ball bearing... Less
More

Leeson Pressure Washer Duty...

$279.99
Northern Tool Leeson Pressure Washer Duty Electric Motor -3/4 HP, 3450 RPM, 115/208-230 Volts, Single Phase, Model 110108, Brown
+ $19.99 shipping
/leeson-pressure-washer/Ap9UJ8mzG0-IcKMMDI58xg==/info
Northern Tool
IN_STOCK ( In stock )
The single phase 3/4 HP Leeson Pressure Washer Duty Electric Motor is specially suited for use in hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. UL listed and CSA approved. Capacitor Start Yes, CSA Yes, Frame Type 56, Capacitor Run Yes, Motor Phases 1, Reversible Yes, Hertz 60, HP 3/4, Manual Overload Protection Yes, Totally Enclosed Housing Yes, UL Yes, Rigid Base Yes, Rotation Direction RCW, Shank Diameter in. 5/8, Volts 115/208-230, Shank Length in. 2.125, Amps 5, Rated RPM 3,450. Double shielded ball bearings are pre-lubricated with a special formulation for moisture resistance and provides extra long life Allows operating temps ranging from -20F to +350F Extra heavy varnish to provide additional... Less
More

Leeson Woodworking Electric...

$279.99
Northern Tool Leeson Woodworking Electric Motor - 1 HP, 3450 RPM, 115/208-230 Volts, Single Phase, Model 110142
+ $19.49 shipping
/leeson-woodworking/dlvKiCGqu6iwOVh8WMspKw==/info
Northern Tool
IN_STOCK ( In stock )
This Leeson motor is specially designed for woodworking equipment such as table saws, planers, and more. With over 40 years of motor knowledge, you can trust Leeson to get the job done. Shank Diameter in. 5/8, Motor Phases Single, Rated RPM 3,450, Volts 115/208-230, Totally Enclosed Housing Yes, HP 1, Manual Overload Protection Yes, Reversible Yes, Rotation Direction Clockwise or counter clockwise, Shank Length in. 1 7/8, Frame Type NEMA 56, Hertz 60, Amps 6 at 230, CSA Yes, UL Yes. Totally enclosed design prevents motor problems caused by wood dust and shavings Fully gasketed to prevent dust entry Manual reset overload protects against motor overload and automatic resets Totally enclosed, fan cooled TEFC housing has an external fan to provide cooling by blowing air over the outside frame... Less
More

Lincoln Electric 300 Amp...

$29.99
Northern Tool Lincoln Electric 300 Amp Electrode Holder - Model KH521, Brown
+ $5.99 shipping
/lincoln-electric-300-amp/r-QTGSYjVWT3ZKhHg8GBOw==/info
Northern Tool
IN_STOCK ( In stock )
This Lincoln Electric 300 Amp Electrode Holder is a professional quality, heavy-duty industrial holder designed for dependability and long life. Works With Arc welding, Size 300A, Product Type Electrode holder, Product Style Clamp. Heat-resistant electrode holder is rated for up to 300 amps Insulated to provide safety while welding Copper tongs hold tight and deliver high conductivity Fiberglass handle and fiberglass jaws are lightweight yet strong Model Number: KH521. Color: Copper. Age Group: Adult.
More

Lincoln Electric MIG Welding...

$12.99
Northern Tool Lincoln Electric MIG Welding Nozzle - Copper (Brown), 1-Pack, Model KH481
+ $5.99 shipping
/lincoln-electric-mig/LzJIHH6dLn9t9HxkRPMuWA==/info
Northern Tool
IN_STOCK ( In stock )
This Lincoln Electric MIG Welding Nozzle is designed for use with gas welding with MIG and wire feed welders. The replacement part is compatible with a variety of welding guns. Sold individually. Product Style MIG, Product Type Nozzle, Works With Wirefeed welder. Tough copper construction Fits compatible welding guns from Lincoln Electric The ideal replacement part Model Number: KH725. Color: Copper. Age Group: Adult.
More

Ironton Compressor-Duty...

$139.99
Northern Tool Ironton Compressor-Duty Electric Motor - 2 HP, Model 119573.00
+ $12.99 shipping
/ironton-compressorduty/0gJqqiW_wMctQ1N4HOcN6A==/info
Northern Tool
IN_STOCK ( In stock )
This Ironton Compressor-Duty Electric Motor with capacitor start design is ideal for use on compressors, pumps, pressure washers and other clean and dry applications that require a high starting torque. Features a drip-proof design to prevent water and other contaminants from entering the machine. Amps 15/7.5, Motor Phases Single, Shank Length in. 1 7/8, Auto Overload Protection No, Capacitor Run Yes, Capacitor Start Yes, CSA Yes, Frame Type M56, Hertz 60, HP 2, Manual Overload Protection Yes, Open Drip Proof Housing Yes, Rated RPM 3,450, Resilient Base No, Reversible No, Rigid Base Yes, Rotation Direction Clockwise, Shank Diameter in. 5/8, Totally Enclosed Housing No, UL No, Volts 115/230. Single phase motor with capacitor start Steel frame with ball bearing construction Rigid base for... Less
More

Ironton Compressor-Duty...

$209.99
Northern Tool Ironton Compressor-Duty Electric Motor - 5 HP, Model 119575.00
+ $12.99 shipping
/ironton-compressorduty/8bwydB4Ri8lL5p4MsC-3LQ==/info
Northern Tool
IN_STOCK ( In stock )
This Ironton Compressor-Duty Electric Motor with capacitor start design is ideal for use on compressors, pumps, pressure washers and other clean and dry applications that require a high starting torque. Features a drip-proof design to prevent water and other contaminants from entering the machine. Volts 208/230, UL No, Totally Enclosed Housing No, Shank Diameter in. 5/8, Rotation Direction Clockwise, Rigid Base Yes, Reversible No, Resilient Base No, Rated RPM 3,450, Open Drip Proof Housing Yes, Capacitor Start Yes, Capacitor Run Yes, Auto Overload Protection No, Amps 15, Manual Overload Protection Yes, HP 5, Hertz 60, Frame Type P56, CSA Yes, Motor Phases Single, Shank Length in. 1 7/8. Single phase motor with capacitor start Steel frame with ball bearing construction Rigid base for... Less
More

Leeson Air Compressor...

$239.99
Northern Tool Leeson Air Compressor Electric Motor - 2 HP, Model 116512
+ $23.49 shipping
/leeson-air-compressor/_gS5e-uwwQCKm9fDGGe0Yg==/info
Northern Tool
IN_STOCK ( In stock )
This dependable and powerful LEESON compressor duty motor is designed especially for compressors which require high breakdown torque and rugged mechanical construction. Trust LEESON for high-quality compressor duty motors to get the job done. Amps 9.6 at 230V, Hertz 60, HP 2, Manual Overload Protection Yes, Frame Type 56, Rated RPM 3,450, Shank Diameter in. 5/8, UL Recognized, Volts 115/208-230, Motor Phases Single, Rotation Direction Clockwise or counter clockwise, CSA Certified. Pre-lubricated, double-shielded ball bearings to accommodate varying belt loads and tension High-efficiency designs for energy savings High starting and breakdown torque Reversible rotation direction adds versatility Continuous duty operation Manual reset overload protects against motor overload and automatic... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.MediaMath-30410