Amazon

R6 Open Ball Bearings 3/8 x 7/8 x 7/32 inch Lot of 10 Bearings R6 Open Ball Bearings, the inner diameter is 3/8, outer diameter is 7/8 and the width is 7/32, this is a popular size that could be used in many applications, Bearings are made of Chrome Steel, Bearings are packed 10 bearings in one plastic tube. * Item: R6 Ball Bearings * Type: Deep Groove Ball Bearings * Closures: Open * Size: 3/8 x 7/8 x 7/32 inch * Inner Diameter: 3/8 inch * Outer Diameter: 7/8 inch * Width: 7/32 inch * Quantity: 10 Bearings * Dynamic load rating: 745 LBS * Static load rating: 315 LBS * Packing: 10 bearings in One plastic tube

Ball Bearings MR117ZZ 7 x 11 x 3 10 Bearings 10 Ball Bearings MR117ZZ, the inner diameter is 7, outer diameter is 11 and the width is 3, this is a popular size that could be used in many applications, Bearings are made of Chrome Steel, each bearing has Double Shielded to protect the bearing from dust or any possible contamination. * Item: Double Shielded Ball Bearings * Type: Deep groove ball bearings * Shields: Double Shielded * Lubrication: Self Lubricated (Grease) * Dimensions: 7*11*3 mm/Metric * ID (inner diameter) /Bore=7mm * OD (outer diameter)=11mm * Width/Height/thic kness=3mm * Size: 7mm x 11mm x 3mm * Quantity: 10 Bearings * Dynamic load rating Cr: 460 N * Static load rating Cor: 200 N * Limiting Speed: * Grease Lubrication: 49,000 RPM * Packing: 10 bearings in One plastic tube... Less

This 4x7x2.5-millimeter shielded miniature ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. It is shielded to keep lubricant in and contaminants out, and it comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove shielded miniature ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.What's in the Box10 4x7x2.5-millimeter miniature ball bearingsRolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and... Less

The NSK ball bearing with metric dimensions is a single-row bearing with maximum capacity for supporting radial loads and has a single shield. The pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. The bearing is shielded on the side of the bearing exposed to contaminants and open on the other for applying lubricant. This maximum-capacity ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.Rolling bearings use rolling elements to maintain the separation between moving... Less

This miniature radial ball bearing has double seals and a steel cage, and conforms to the ABEC 1 precision standard. This bearing has an 8 mm bore diameter, a 12 mm outside diameter, and a 3.5 mm width. Its precision is rated at ABEC 1 by the Annular Bearings Engineers Committee (ABEC), allowing higher speeds and creating lower friction than less-precise ball bearings, and its radial internal clearance is C3 for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is made of ASTM International 52100 steel and heat treated to increase hardness for optimum wear resistance. Its deep ball grooves in both races support high radial and axial loads, its straight bore fits conventional cylindrical shafts, and its steel cage... Less

This miniature radial ball bearing has double seals and a nylon cage, and conforms to the ABEC 1 precision standard. This light duty bearing has a 3 mm bore diameter, an 8 mm outside diameter, and a 3 mm width. Its precision is rated at ABEC 1 by the Annular Bearings Engineers Committee (ABEC), allowing higher speeds and creating lower friction than less-precise ball bearings, and its radial internal clearance is C3 for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is made of ASTM International 52100 steel and heat treated to increase hardness for optimum wear resistance. Its deep ball grooves in both races support high radial and axial loads, its straight bore fits conventional cylindrical shafts, and its... Less

This Timken Light 200K Series open ball bearing with a snap ring is suitable for applications that support radial, thrust, and combined loads. This bearing is classified as Light, making it applicable for use in limited space applications or for average loads. Deep raceways keep the balls stable under high rotational speeds, and the steel cage evenly spaces the balls in the bearing for reduced friction, vibration, and noise, making the bearing suitable for motor applications where quiet operation is required. The bearing has a snap ring on one side for holding the bearing in place, such as to a bearing housing, and the open design facilitates lubricating the bearing in place and dissipating heat. Light open ball bearings are designed for use as a general purpose bearing in a broad range... Less

10 Ball Bearings 6901-2RS 12 x 24 x 6 mm 10 Ball Bearings 6901-2RS, the inner diameter is 12, outer diameter is 24 and the width is 6, this is a popular size that could be used in many applications, Bearings are made of Chrome Steel, each bearing has Double Shielded to protect the bearing from dust or any possible contamination. Bearings are packed 10 bearings in one plastic tube. * Item: Double Sealed Ball Bearings * Size: 12 x 24 x 6 mm * Dimensions: 12*24*6 mm/Metric * ID (inner diameter) /Bore=12mm * OD (outer diameter)=24mm * Width/Height/thic kness=6mm * Equal: 6901-2RS1 & 6901-2RZ * Type: Deep groove ball bearings * Closures: 2 Rubber Seals * Lubrication: Self Lubricated (Grease) * Quantity: 10 Bearings * Packing: 10 bearings in 1 plastic tube * Bearings Marked: 6901RS * Equal:... Less

This MRC R series single-row small inch-size ball bearing is an open bearing, and has a pressed steel cage and normal clearance rating. It is suitable for applications supporting high speeds, moderately heavy radial loads, and thrust loads in both directions. Made from high-carbon chromium steel, this bearing has deep inner and outer races that conform to the balls that run in them, allowing higher speeds and creating lower friction than comparable-sized roller bearings. The bearing has a small design package for fitting into compact spaces and onto small shaft sizes. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration,... Less

This miniature radial ball bearing has double seals and a nylon cage, and conforms to the ABEC 1 precision standard. This light duty bearing has a 6 mm bore diameter, a 10 mm outside diameter, and a 3 mm width. Its precision is rated at ABEC 1 by the Annular Bearings Engineers Committee (ABEC), allowing higher speeds and creating lower friction than less-precise ball bearings, and its radial internal clearance is C3 for radial slack between the inner and outer rings is greater than CN (normal) to compensate for thermal expansion. This bearing is made of ASTM International 52100 steel and heat treated to increase hardness for optimum wear resistance. Its deep ball grooves in both races support high radial and axial loads, its straight bore fits conventional cylindrical shafts, and its... Less

This 63/28-2RS 28x68x18- millimeter sealed ball bearing has deep groove geometry for high speeds and supporting both radial and axial loads. This bearing is made of chrome steel for durability and resistance to deformity under heavy loads, and it has rubber seals on both sides of the bearing to keep lubricant in and contaminants out. It comes pre-lubricated from the manufacturer so that no additional lubrication is required. This deep-groove sealed ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.What's in the Box2 63/28-2RS 28x68x18- millimeter ball... Less

This Timken Light 200K Series open ball bearing with no snap ring is suitable for applications that support radial, thrust, and combined loads. This bearing is classified Light, making it suitable for use in limited space applications or for average loads. Deep raceways keep the balls stable under high rotational speeds, and the steel cage evenly spaces the balls in the bearing for reduced friction, vibration, and noise, making the bearing suitable for electric motor applications where quiet operation is required. The open design facilitates lubricating the bearing in place and dissipating heat. Light open ball bearings are suitable for use as a general purpose bearing in a broad range of applications involving light to medium loads combined with relatively high speeds. These include... Less

This NSK R series single-row small-size ball bearing has a single seal, pressed steel cage, and normal clearance rating. It is suitable for applications supporting high speeds, moderately heavy radial loads, and thrust loads in both directions. Made from high-carbon chromium steel, this bearing has deep inner and outer races that conform to the balls that run in them, allowing higher speeds and creating lower friction than comparable-sized roller bearings. The bearing has a small design package for fitting into compact spaces and onto small shaft sizes. The bearing has a rubber seal on one side that is fastened to the outside ring, extends over the rolling elements but does not make contact with the inside ring. The seal helps keep out course contaminants such as dirt and debris and... Less

This Timken Light 200K Series open ball bearing with a snap ring is suitable for applications that support radial, thrust, and combined loads. This bearing is classified as Light, making it applicable for use in limited space applications or for average loads. Deep raceways keep the balls stable under high rotational speeds, and the steel cage evenly spaces the balls in the bearing for reduced friction, vibration, and noise, making the bearing suitable for motor applications where quiet operation is required. The bearing has a snap ring on one side for holding the bearing in place, such as to a bearing housing, and the open design facilitates lubricating the bearing in place and dissipating heat. Light open ball bearings are designed for use as a general purpose bearing in a broad range... Less

The NSK R series small-size ball bearing is a single-row bearing with inch dimensions for supporting radial loads. It is double-shielded and has normal radial internal clearance for applications that do not involve thermal expansion or atypical precision. The pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. The bearing has shields on both sides of the bearing to keep lubricant in and contaminants out. This R series small-size ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines,... Less

This FAG 33 series double-row angular contact ball bearing is an open bearing, and has a maximum capacity, 35-degree contact angle, brass cage, and normal clearance rating. It supports heavy radial loads, thrust loads in both directions, and combined loads, and it occupies less axial space than a pair of single-row angular contact ball bearings mounted together. The 32 series bearing has filling slots on one side to permit the insertion of the maximum number of balls in the raceways for a higher radial load capacity than a Conrad-type bearing of the same size. Additionally, the 33 series has a larger cross section than the 32 series, making it suitable for heavier loads and slower speeds. This bearing is made of low-alloy, through-hardened chromium steel for durability and resistance to... Less

The NSK ball bearing with metric dimensions is a single-row bearing with maximum capacity for supporting radial loads and has a single shield. The pressed steel cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise. The bearing is shielded on the side of the bearing exposed to contaminants and open on the other for applying lubricant. This maximum-capacity ball bearing is for use in applications that involve combined radial and axial loads and a need for high running accuracy and stiffness at high rotational speeds. Such applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.Rolling bearings use rolling elements to maintain the separation between moving... Less

This Timken Extra Small S Series double sealed ball bearing with no snap ring is suitable for applications that support radial, thrust, and combined loads. Under combined load scenarios, the thrust load should not exceed 60 percent of the radial load. Made from chromium-alloy, high-carbon steel, this bearing is designed for small shafts driven by motors under one horsepower. The steel cage evenly spaces the balls in the bearing for reduced friction, vibration, and noise, making the bearing suitable for electric motor applications where quiet operation is required. The bearing has rubber seals on both sides to keep out contaminants such as dirt and grime and to hold in lubricant applied at manufacture. Extra small double sealed ball bearings are for use in small motor applications such as... Less