Carbide Lathe Home and Garden - Shopping.com
Showing results for "carbide lathe"
Results 1 - 40 of 1500+

Jet 660210 23-Piece Turning...

Free Shipping
6 stores Jet 660210 23-Piece Turning Tool Kit for All ZX Series Lathes
More

JET 660210 23-Piece Turning...

$249.00
CPO Outlets JET 660210 23-Piece Turning Tool Kit for ZX Lathes
Free Shipping
/jet-660210-23piece/E1vA4dbnNhM3wn2WB6MTQg==/info
CPO Outlets
IN_STOCK ( In stock )
Store not rated
Free Shipping
3 double ended boring bars. Parting tool holder and adjustable turning tool holder. Revolving knurling tool with three pairs of knurls. Half dead center. Carbide tipped dead center. Heavy-duty live center. Cut-off tool. 8 HSS tool bits. 4 hex key wrenches. Works with all ZX series lathes
More

SHOP FOX Lathe - 10 Inch x 20...

$1,729.99
Northern Tool SHOP FOX Lathe - 10 Inch x 20 Inch, Model M1016
Free Shipping
/shop-fox-lathe-10-inch/t2hqoyQPrH-38VTNVGRvTw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Lathe M1016 is an excellent small-sized lathe with an impressive 9 3/4in. swing and 21in. distance between centers. Includes handy accessories like 5in. 3-jaw chuck, eye shield and 4-way turret tool post. Cannot ship to AK, CA, HI, MA, MD and RI. Width Between Centers in. 21, Stand Included No, Dimensions L x W x H in. 23 x 44 x 17 1/2, HP 3/4, Volts 110, Thread Cutting in. 8 TPI-40 TPI in 12 steps, Speed RPM 150-2,400, Thread Cutting mm 12 at 0.4-3.0. 5in., 3-jaw chuck Cross slide table 11 change gears 2 dead centers 4-way turret tool post Eye shield Forward/reverse switch with emergency stop Swing 9 3/4in. Swing over cross slide 6in. Spindle bore 3/4in. Spindle taper MT #3 Tailstock taper MT #2 Tailstock barrel travel 1/2in. Cross slide travel 4 1/4in. Compound travel 2... Less
More

Carbide Lathe Tool Set, 5/16...

$67.71
Walmart.com Carbide Lathe Tool Set, 5/16 In
+ $7.80 shipping
/carbide-lathe-tool-set/bzZkoSgiku5clf3D-Dv57A==/info
Walmart.com
IN_STOCK ( In stock )
LathesLathe Tool Bit Set, Single Point Brazed Carbide Tipped, Number of Pieces 11, Capacity 5/16 In. Shanks, For Use With Lathes, Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off., Includes 11 Single Point Brazed Carbide Lathe Tool Bits Plus Case
More

20pcs M3.5 x 12mm Mini Insert...

$2.16
Banggood 20pcs M3.5 x 12mm Mini Insert Torx Screws Set For Carbide Inserts CNC Lathe Tool-Turning Tool
Free Shipping
/20pcs-m35-x-12mm-mini/IPsFEQAuXDHiBokj1TgXuw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 20pcs M3.5 x 12mm Mini Insert Torx Screws Set For Carbide Inserts CNC Lathe Turning Tool Holder Specifications: Material: Stainless Steel Screw Size: M3.5 Head diameter: 5mm Total Lehgth: 12mm Quantity: 20pcs Suitable for: All kinds of knife rod, cutter bar, cutter plate and so on. Package Included: 20pcs x M3.5 x 12mm Insert Torx screw Note: 1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you. More Details:
More

JET 660200 22-Piece Turning...

Free Shipping
3 stores JET 660200 22-Piece Turning Tool Kit for 13 & 14-in Lathes
22-Piece Turning Tool Kit for 13 & 14 Lathes - 660200. 3 double ended boring bars. Parting tool...
More

SHOP FOX Bench Lathe - 10...

$2,049.99
Northern Tool SHOP FOX Bench Lathe - 10 Inch x 26 Inch, Model M1099
Free Shipping
/shop-fox-bench-lathe-10/InmPgeqUUqMFlHi1-AHnlw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
This SHOP FOX Bench Lathe makes changing the thread selections quick and easy. Instead of swapping change gears for each thread selection, merely refer to the thread chart and rotate the alpha and numeric dials on the quick change gearbox to make the thread change. This 6-speed lathe also has extended length hardened and ground precision bedways, 1in. spindle bore, a selection of chucks, face plate and other accessories. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 22 1/2, Dimensions L x W x H in. 50 x 32 x 16 5/8, HP 1, Volts 110 single phase, Width Between Centers in. 26, Spindle Speeds qty. 6, Stand Included No, Thread Cutting in. 33 at 8-72 TPI, Thread Cutting mm 26 at 0.25-3.5, Speed RPM 1,725. 5in. 3-jaw chuck with two sets of jaws 6 1/2in. 4-jaw chuck with... Less
More

SHOP FOX Mini Lathe - 6 Inch...

$739.99
Northern Tool SHOP FOX Mini Lathe - 6 Inch x 10., Model M1015
Free Shipping
/shop-fox-mini-lathe-6/qLmrg6sv7nCrLCIcZuTKNw==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Mini-Lathe is a perfect lathe for someone who wants a durable and well-designed machine that can fit in a small location. The M1015 gives model makers, toolmakers, gun hobbyists and weekend machinists a way to economically produce small precision parts, threaded parts, fittings, and dies. Cannot ship to AK, CA, CT, HI, MA, MD and RI. Center Height in. 10, HP 1/5, Volts 110, Stand Included No, Speed RPM 100- 2000. 3in. chuck with internal and external jaws Swing over bed 6in. Distance between centers 10in. Cross slide travel 2 3/8in. Spindle bore 3/8in. Spindle taper MT #2 Tailstock taper MT #1 Model Number: M1015. Size: 10. Age Group: Adult.
More

SRDCN1616H10 Lathe Turning...

$37.96
Banggood SRDCN1616H10 Lathe Turning Tool Holder With 10pcs RCMX1003M0 YBC25 Carbide Inserts-Turning Tool
Free Shipping
/srdcn1616h10-lathe/2Qjn6bqRqdd1vF_3BlG2SQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: SRDCN1616H10 Lathe Turning Tool Holder With 10pcs RCMX1003M0 YBC25 Carbide Inserts Specification: ModeL: SRDCN1616H10 Size:16mm x 16mm x 100mm Accept Inserts: RCMX1003M0 YBC25 ISO Grade: P10-P30 Suitable For: Semi-finishing, finishing Features - High grip strength, impact resistance and strong, clear speed advantage in cutting off a large margin and processing; - To maintain tight tolerances unmatched performance; - User clamping and convenient way to replace, only a wrench to complete the replacement of the knife blade and pad; Note: -Open the case carefully. -To avoid injury do not touch sharp edge. -Use safety precaution such as guards and eye protection before using the tool. -Exchange a tool when it occurs problem such as a noise,vibration and a flame. Packing Included:... Less
More

ADVANTAGE PLUS 15500 Carbide...

$58.25
Walmart.com ADVANTAGE PLUS 15500 Carbide Lathe Tool Set,5/16 In
Free Shipping
/advantage-plus-15500/U92VjBTPip2GFbP5YW_x1w==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Lathe Tool Bit Set, Single Point Brazed Carbide Tipped, Number of Pieces 11, Capacity 5/16 In. Shanks, For Use With Lathes, Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off., Includes 11 Single Point Brazed Carbide Lathe Tool Bits Plus Case FeaturesApplicati on: Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off.Capacity: 5/16 ShanksDia.: 5/16Includes: Case, 5/16 ShankItem: Lathe Tool Bit SetMaterial: High Carbon Tool Steel, Carbide... Less
More

12 12mm YT5 Carbide Tipped...

$3.55
Banggood 12 12mm YT5 Carbide Tipped External Turning Tool 90 Degree Lathe Cutting Tool-Turning Tool
Free Shipping
/12-12mm-yt5-carbide/Z3ndqd0HKcrK_XQSuX-ZCQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 12*12mm YT5 Carbide Tipped External Turning Tool 90 Degree Lathe Cutting Tool Specification: Material: Carbon Steel Tip: Carbide Tipped Degree: 90 Degree Length: 100mm Usage: External Turning Tool Arrow 1-2mm hand measuring error. Quantity: 1pc Package Included: 1x External Turning Tool More Details:
More

ADVANTAGE PLUS 15501 Carbide...

$63.28
Walmart.com ADVANTAGE PLUS 15501 Carbide Lathe Tool Set,3/8 In
Free Shipping
/advantage-plus-15501/qwVQcUg_2_dDcUBzsyvneg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Lathe Tool Bit Set, Single Point Brazed Carbide Tipped, Number of Pieces 11, Capacity 3/8 In. Shanks, For Use With Lathes, Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off., Includes 11 Single Point Brazed Carbide Lathe Tool Bits Plus Case FeaturesApplicati on: Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off.Capacity: 3/8 ShanksDia.: 3/8Includes: Case, 3/8 ShankItem: Lathe Tool Bit SetMaterial: High Carbon Tool Steel, Carbide... Less
More

Dremel 3-Pack Carbide...

$34.90
Lowe's Dremel 3-Pack Carbide Oscillating Tool Blades Mm485b
Free Shipping
/dremel-3pack-carbide/F6QiJhRJHxK4SJ_n_EQhfg==/info
Lowe's
IN_STOCK ( In stock )
Free Shipping
High-performance carbide teeth cut through hardwoods nails screws stainless-steel bolts galvanized pipe plaster and lathe cement board fiber board sheet metal slate ceramic tile and more. Wide 1-14-in blade speeds through long cuts and can make plunge cuts up to 1-1116-in deep. Universal Quick-Fit system allows this blade to fit nearly every oscillating tool on the market.
More

10 10mm YT5 Carbide Tipped...

$2.85
Banggood 10 10mm YT5 Carbide Tipped External Turning Tool 90 Degree Lathe Cutting Tool-Turning Tool
Free Shipping
/10-10mm-yt5-carbide/ZAqowMcGZBsIUifSt_Ga8w==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 10*10mm YT5 Carbide Tipped External Turning Tool 90 Degree Lathe Cutting Tool Specification: Material: Carbon Steel Tip: Carbide Tipped Degree: 90 Degree Length: 90mm Usage: External Turning Tool Arrow 1-2mm hand measuring error. Quantity: 1pc Package Included: 1x External Turning Tool More Details:
More

ADVANTAGE PLUS 15502 Carbide...

$85.42
Walmart.com ADVANTAGE PLUS 15502 Carbide Lathe Tool Set, 5/8 In
Free Shipping
/advantage-plus-15502/QQ1ogQQapwEaudkuq2AmHg==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Lathe Tool Bit Set, Single Point Brazed Carbide Tipped, Number of Pieces 11, Capacity 5/8 In. Shanks, For Use With Lathes, Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off., Includes 11 Single Point Brazed Carbide Lathe Tool Bits Plus Case FeaturesApplicati on: Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials. These Tools Are Used For Internal And External Operations. With This Set You Can Face, Rough, Finish Both To The Right And Left Plus Parting Or Cutting Off.Capacity: 5/8 ShanksDia.: 5/8Includes: Case, 5/8 ShankItem: Lathe Tool Bit SetMaterial: High Carbon Tool Steel, Carbide... Less
More

10x10mmx90mm YT5 Carbide...

$2.56
Banggood 10x10mmx90mm YT5 Carbide Tipped Lathe Cutting Tool Turning Tool-Turning Tool
Free Shipping
/10x10mmx90mm-yt5-carbide/-_-A22dXlkpewTD0Qtb7DA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 10x10mmx90mm YT5 Carbide Tipped Lathe Cutting Tool Turning Tool Specification: Material: Carbon Steel Tip: Carbide Tipped Square Size: 10*10mm Length: 90mm Usage: Turning Tool Arrow 1-2mm hand measuring error. Quantity: 1pc Package Included: 1x Turning Tool More Details:
More

Nicholson 10 Fine Cut Long...

$16.29
MidwayUSA Nicholson 10 Fine Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-fine-cut/IQk0bTBJRtFjxMyvLkfATg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.185 thick, 0.935 wide File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut
More

7pcs 10mm Shank Lathe Turning...

$45.99
Banggood 7pcs 10mm Shank Lathe Turning Tool Holder Boring Bar With Carbide Inserts-Turning Tool
Free Shipping
/7pcs-10mm-shank-lathe/38kEs1_6klLF81ZUiaX28A==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 7pcs 10mm Shank Lathe Turning Tool Holder Boring Bar With Carbide Inserts Specifications: Model: MGEHR1010-2 / SER1010H11 / SCLCR1010H06 / SDJCR1010H07 / SDNCN1010H07 / S10K-SCLCR06 / SNR0010K11 Material: 42cr No. Model Shank Diameter (mm) Overal Length (mm) Insert 1 MGEHR1010-2 10 100 MGMN200 2 SER1010H11 10 100 11 ER 3 SCLCR1010H06 10 100 CCMT060204 4 SDJCR1010H07 10 100 DCMT070204 5 SDNCN1010H07 10 100 DCMT070204 6 S10K-SCLCR06 10 125 CCMT060204 7 SNR0010K11 10 125 11 IR Note: Open the tool case carefully. To avoid injury do not touch shape edge. Use safely precaution such as guards and eye protection before using the tool. Exchange a tool when it occure problems such as a noise vibration and a flame. Package Included: 7pcs x Holders 7pcs x T8Wrenches 7pcs x Inserts More... Less
More

10pcs VNMG160404 Carbide...

$24.16
Banggood 10pcs VNMG160404 Carbide Inserts For MVJNR MVQNR MVVNN Series Lathe Turning Tool-Turning Tool
Free Shipping
/10pcs-vnmg160404-carbide/AH7PJItAFDm7AoebnA5aNQ==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 10pcs VNMG160404 Carbide Inserts For MVJNR MVQNR MVVNN Series Lathe Turning Tool Specifications: Model: VNMG160404 Material: Carbide Color: Gold Gold processing ordinary steel (CVD chemical coating, machining steel parts are recommended) Quantity: 10pcs Note: V = blade shape, V is 35 degrees diamond N 0 degree angle after angle of 0 degrees are two-sided blade after blade = M = blade edge length, thickness, bore accuracy level (negligible do not understand) G = generation of slot holes character (not to be ignored understand) Length = 16 is a cutting edge 16mm 04 = the thickness of the blade, 04 = 4.76mm 04 = R of a nose angle Package Included: 10pcs x VNMG160404 Inserts More Details:
More

Lathe Back Gear - 10-241X

$269.73
Sears Parts Direct Lathe Back Gear - 10-241X
Free Shipping
/lathe-back-gear-10241x/5ZNpuw2S57LNBjzA2rnF2Q==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Free Shipping
This manufacturer- approved back gear (part number 10-241X) is for lathes.Back gear 10-241X allows the lathe to turn at a slower speed.Wear work gloves to protect your hands when installing this part.
More

Tungsten Carbide Lathe...

$8.85
Walmart.com Tungsten Carbide Lathe External Turning Tool Holder Milling Cutter
Free Shipping
/tungsten-carbide-lathe/NQS5NKWjFDN_5sILtirBdw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
Made from Tungsten Carbide material, 90 degree, tough for milling use. Fit for most lathe.Used for medium and higher degree cutting, and precise milling. Suitable for cutting stainless steel, cast iron, cast steel, forging steel, alloy steel material workpiece, make it more glossy and remove blank.
More

PTG Lathe Centering Bar 1 x 8

$94.99
MidwayUSA PTG Lathe Centering Bar 1 x 8
+ $7.59 shipping
/ptg-lathe-centering-bar-1/wfV7wlVee5MmUqELWLQUpw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This steel centering bar allows the alignment of a lathe to be checked. Technical InformationNotes: Allows checking alignment of lathe. Recesses on each end align headstock and tailstock centers. Aids in offsetting tailstock for taper cutting. Steel.
More

16 16mm YT5 Carbide Tipped...

$5.55
Banggood 16 16mm YT5 Carbide Tipped Lathe Cutting Tool 45 Degree External Turning Tool-Turning Tool
Free Shipping
/16-16mm-yt5-carbide/7u4DOkuC4iupHgLvtweMaw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 16*16mm YT5 Carbide Tipped Lathe Cutting Tool 45 Degree External Turning Tool Specification: Material: Carbon Steel Tip: Carbide Tipped Square Size: 16*16mm Degree: 45 Degree Length: 110mm Usage: External Turning Tool Arrow 1-2mm hand measuring error. Quantity: 1pc Package Included: 1x External Turning Tool More Details:
More

Nicholson 10 Bastard Cut Long...

$15.99
MidwayUSA Nicholson 10 Bastard Cut Long Angle Lathe File
+ $4.99 shipping
/nicholson-10-bastard-cut/OewP2xBnhPs8eABCqXqisA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Designed to cut faster than regular mill files for lathe filing, these rectangular- shaped, single-cut, safe-edge files are just the ticket for filing the turning marks off of a barrel for that smoother-than-glas s finish. Technical InformationFeatur es: Rapid free cutting file designed for lathe filing Cut faster than regular mill files and leave a smoother finish Safe edges Notes: Approximately 0.2 thick, 0.935 wide tapering to 0.71 File length is measured exclusive of tang, from point to heel American pattern files are available in 3 grades of cut: bastard-cut, second-cut and smooth-cut Swiss pattern files are offered in seven cuts: No. 00, 0, 1, 2, 3, 4 and 6 with #00 being the coarse, #6 the fine cut
More

10pcs CCMT09T304 CCMT32.5...

$9.97
Banggood 10pcs CCMT09T304 CCMT32.5 Carbide Insert For Lathe SCLCR Turning Tool Holder-Turning Tool
Free Shipping
/10pcs-ccmt09t304-ccmt325/px0qHUZI4D7n1nMYre6Y4w==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 10pcs CCMT09T304 CCMT32.5 Carbide Insert For Lathe SCLCR Turning Tool Holder Specifications: Model: CCMT09T304 (CCMT32.5) Material: Carbide Size:10x10mm Thickness: 4mm Box Size: 96x40mm Quantity: 10pcs Suitable For: Normal processing stainless steel and ordinary, such as steel 45 steel, A3 steel, stainless steel and other soft materials 201,304 Features: -Blade has high strength, high toughness, stable and durable. -For high hardness materials and cast iron. -Metal surface finishing, good wear resistance. -Mainly used for general steel machining. Packing Included: 10pcs x CCMT09T304 Insert Note: 1.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the... Less
More

Lathe Bullnose Carbide Morse...

$17.16
Walmart.com Lathe Bullnose Carbide Morse Taper Solid Dead Center
Free Shipping
/lathe-bullnose-carbide/JCm_U3BDneXYAIsc4AS8Jw==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
The Morse Taper dead Center is mainly used in drilling machine and lathe machine.Support the tailstock end of your workpiece with this hardened and ground dead center. Alloy material, this dead center requires lubrication.
More

Lathe Pulley Bushing - L3-109

$20.48
Sears Parts Direct Lathe Pulley Bushing - L3-109
+ $8.99 shipping
/lathe-pulley-bushing/1XweZG0t9uKngJHS5GW6mg==/info
Sears Parts Direct
IN_STOCK ( In stock )
Store not rated
Choose this manufacturer- approved bushing for your lathe.Use this bushing to replace a bushing that allows your lathe to spin.The bushing works with your lathe's variable speed pulley and main pulley spindle. Plan to replace your lathe's spindle when repl
More

SHOP FOX Bench Lathe - 9 Inch...

$1,479.99
Northern Tool SHOP FOX Bench Lathe - 9 Inch x 19 Inch, Model M1049
Free Shipping
/shop-fox-bench-lathe-9/-Kl6_b-5GhIVatler5R7ag==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The SHOP FOX Bench Lathe has all the features and precision of the larger lathes, but at a fraction of the cost. Check out all the features and you'll agree it's got everything you need 4in. 3-jaw chuck with two sets of jaws, 7 1/4in. 4-jaw chuck with reversible jaws, steady rest, follow rest, MT #2 and MT #3 dead center, MT #2 live center, 4-way tool post, extra C-type tool post and more Includes toolbox and tool kit. Cannot ship to AK, CA, HI, MA, MD and RI. Carriage Travel in. 16, Spindle Speeds qty. 6, Stand Included No, Volts 110 single phase, Thread Cutting in. 8-56 TPI, Thread Cutting mm 0.05-3.0, HP 3/4, Width Between Centers in. 19, Speed RPM 1,725, Dimensions L x W x H in. 22 x 36 1/2 x 15. Swing over bed 9in. Swing over cross slide 5in. Distance between centers 19in. Spindle... Less
More

Shop Fox Wood Lathe with...

$799.99
Northern Tool Shop Fox Wood Lathe with Stand - 16 Inch x 43 Inch, 2 HP, Model W1758
+ $326.35 shipping
/shop-fox-wood-lathe-with/Ls7DoF5BWls7zhBGN6B6Aw==/info
Northern Tool
IN_STOCK ( In stock )
The Shop Fox 16in. x 43in. Wood Lathe with Stand is a fully featured and powerful lathe at a competitive price. It features a hefty 2 HP motor, 10 speeds, a swivel head for easy outboard bowl turning, a digital tach for exact spindle speeds, plus precision ground cast iron bed, headstock and tailstock quick locks and heavy cast iron legs for stability. Cannot ship to AK, CA, HI, MA, MD and RI. Speed Range RPM 600-2400, Amps 14, Dimensions L x W x H in. 76 1/2 x 19 x 48 3/4, Distance Between Centers in. 46, HP 2, Speeds qty. 10, Spindle Thread Size 1 x 8, Swing in. 16, Volts 110. 2 HP, 14 Amp, 110V single-phase motor Swing over bed 16in. 1in. x 8 TPI RH headstock spindle MT#2 spindle and tailstock tapers 3/8in. spindle bore 10 speeds 600-2400 RPM 0, 60, 90, 120 and 180 headstock rotation... Less
More

JET ZX Lathe - 14 x 60, Model...

$18,000.00
Northern Tool JET ZX Lathe - 14 x 60, Model GH-1460ZX
Free Shipping
/jet-zx-lathe-14-x-60/_fWzMwu8haPevXEmj8k3aQ==/info
Northern Tool
IN_STOCK ( In stock )
Free Shipping
The 14in. ZX Series large spindle bore lathe is designed exclusively by with a 3 1/8in. bore spindle supported by two tapered and one ball bearing. Chrome molybdenum headstock gears are hardened, ground and shaved. Universal gearbox allows inch, metric, diametric and module pitch threads, no change gears required. Carriage features one-shot lubrication and Turcite B on bed sliding surfaces. Thread Cutting mm 0.05-20, Stand Included Yes, Thread Cutting in. 1 5/8-72, Dimensions L x W x H in. 117 x 40 x 48, HP 7.5, Width Between Centers in. 60, Spindle Speeds qty. 12, Carriage Travel in. 55, Speed RPM 42-1,800, Volts 230/460V prewired 230V. T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts High-quality ANSI Class 50... Less
More

16 16mm YT5 Carbide Tipped...

$6.32
Banggood 16 16mm YT5 Carbide Tipped External Turning Tool 90 Degree Lathe Cutting Tool for Mini Lathe-Turning Tool
Free Shipping
/16-16mm-yt5-carbide/vk9KKBviQEWFOGIh8MGnnw==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 16*16mm YT5 Carbide Tipped External Turning Tool 90 Degree Lathe Cutting Tool for Mini Lathe Specification: Material: Carbon Steel Tip: Carbide Tipped Degree: 90 Degree Length: 110mm Usage: External Turning Tool Arrow 1-2mm hand measuring error. Quantity: 1pc Package Included: 1x External Turning Tool More Details:
More

10pcs APMT1135PDER- BP010...

$6.25
Banggood 10pcs APMT1135PDER- BP010 Inseets Blades Lathe Tool Carbide Cutter Turning Tool-Turning Tool
Free Shipping
/10pcs-apmt1135pderbp010/GexafJKlfiZb4STcoYDupA==/info
Banggood
IN_STOCK ( In stock )
Store not rated
Free Shipping
Description: 10pcs APMT1135PDER- BP010 Inseets Blades Lathe Tool Suiable holder: Product ID: 1069374 Product ID: 1069858 Specification: Model APMT1135PDER -BP010 Material Cemented carbide Size 10.3mm*5.4mm*3.1mm Application Processing of steel Suitable holder BAP300R Features: * High quality and long service life * Exquisite workmanship and high cost performance. Package Included: 10 x APMT1135PDER -BP010 Blades More Details:
More

Ammco 10 pack Carbide Insert,...

$50.33
National Tool Warehouse Ammco 10 pack Carbide Insert, for KWIK-WAY Lathes AMM40415
+ $9.95 shipping
/ammco-10-pack-carbide/vPx8G0c0U0OabSvuk-GZ7w==/info
National Tool Warehouse
IN_STOCK ( In stock )
Store not rated
Carbide inserts positive rake for FMC Kwik-Way and Accuturn lathes and negative rake for Performance and Hunter lathes. Each come 10 per pkg.
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.pixel.ad.ipredictive-30407