cam4cam

Caster Brake Kit, Side Cam Type, Wheel Dia 4,5,6, and 8 In, Zinc Plated Finish, Stamped Steel Construction, For Use With Non Thread Guarded Casters, Includes Installation Hardware and Instructions

When you are looking for a small camcorder then the PI-Cam stick is the product for you! Recording has never been made easier and now the PI Cam Stick has 4GB of internal memory! The PI-CamStick is the smallest high resolution, real time digital camcorder on the market today. Just push the record button and you are discretely recording anything instantly. This unit is able to take full motion video or single image capture with New Video/Picture switchStorage for recordings are on the 4GB's internal memory and for added video storage use a Micro SD card. Up to 33 hours of video can be recorded on a 1GB Micro SD card. The internal rechargeable battery is recharged via USB connection. It can record for up to 2 or more hours on one single charge. Using the new state-of-the-art 3GP third... Less

CRL 1-1/4 Nylon Sash Cam Made of nylon, CRL Sash Cams attach to the top edge of the window sash and provide the proper operating clearance between the sash and frame. Many window manufacturers use these sash cams, we recommend replacing the sash cams when replacing the channel balances as weathering, age and constant use can make the parts brittle and worn. Allows for Proper Operating Clearance Two cams per package. Catalog Number: H3943 Also Available in These Catalogs: CRL83 Master Window an

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a screwdriver slot supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, with a screwdriver slot on the flange end for keeping the stud from turning while tightening the mounting nut. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring... Less

Heavy Duty Nylon Straps, 1 inch wide in lengths 2-20 foot. The easiest and most secure way to tie gear on a raft is with cam buckle straps. The buckle has a cam with teeth that grip the straps and hold tighter as the pull increases. Depressing the cam lever releases the strap. Buckles are top-rated Ancra brand. Heavy-duty straps use nylon webbing rated at 2,500 pounds, which has more abrasion resistance and won't stretch when wet. Heavy-duty models also have labels and metal loops, but are all black.

PT CAM LOCK CAM LEVER HOSE FEMALE MALE THREADS LOT OF 4 NC3/4B 3/4 HOSE FEMALE 3/4 NPT MALE THREADS Condition: NEW, in box X NEW, no box NEW, old inventory USED, but in good working condition. USED, but in good working condition. Removed from closed plant. USED, SOLD AS IS DETAILS: SOUTHBENDINDUSTRI AL, INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract - Place a bid only if you're serious about buying the item. If you are the winning bid

CRL Chrome Cam Lock for 1/4 or 3/8 Glass CRL Cam Locks are suitable for 1/4 or 3/8 (6 or 9.5 mm) thick glass. Tightening is done by means of two plastic tipped screws. The key can be removed in both the locked and unlocked positions. Lock is supplied with gaskets and template. A matching Stop Plate is included to match the finish of the lock of choice. A cut-out in the glass door is required for installation and a notch template is included in the package. For 1/4 or 3/8 (6 to 10 mm) Glas

The best way to hold a box or small cooler on a raft is with a Cam Loop Strap. Each end of one of these straps fastens at a separate location and buckles in the middle. Sewn-in loops fasten easily around a rowing frame member. Cam buckle end is 1' long and the balance of the listed length is on the other side. Cam Loop Straps remain looped in position on the frame, so it is simple to re-attach gear when you're reloading the raft. Loop straps use cam buckles and 1 black polypro strap.

Switch- selectable, spark mode, generates up to nine sparks at idle and three sparks up to 6000 rpm Reduces lean surge and plug fouling True single-fire, each spark plug is fired independently, camshaft position sensor (CMP) is used to determine which cylinder to fire and the crankshaft position sensor (CKP) is used to establish ignition timing Digitally set rev-limiter adjustable from 500 to 9000 rpm increments via two rotary switches Sequence-type rev limiter equalizes cylinder firing at rev limit and reduces popping and banging Two advance curves: performance advance curve for stock and modified engines; race curve for high-compression engines Both curves include vacuum advance using manifold (MAP) sensor, advance slope of either curve can be adjusted in 10 steps via rotary switch to... Less

Cam Latch, Locking, Finish Chrome, Material Zinc, Height (In.) 1-1/4, Width (In.) 2-5/16, Depth (In.) 1, Grip 5/16, 11/16, and 1-1/16, Hardware Included

CRL Brass Cam Lock for 1/4 or 3/8 Glass CRL Cam Locks are suitable for 1/4 or 3/8 (6 or 9.5 mm) thick glass. Tightening is done by means of two plastic tipped screws. The key can be removed in both the locked and unlocked positions. Lock is supplied with gaskets and template. A matching Stop Plate is included to match the finish of the lock of choice. A cut-out in the glass door is required for installation and a notch template is included in the package. For 1/4 or 3/8 (6 to 10 mm) Glass

This McGill CF Camrol series steel heavy-duty stud-type cam follower bearing with lip seals and a screwdriver slot supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. Its heavy-duty integral stud with a large diameter supports heavier static loads than standard studs while exhibiting minimal stud deflection. The screwdriver slot on the flange helps keep the stud from turning while tightening the mounting nut. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to... Less

Cam Latch, Compact T Handle, Type A, Non Locking, Finish Bright Chrome, Material Zinc/steel, Height (in.) 1-19/32, Length (in.) 2-15/16, Width (in.) 1, Depth (in.) 2, Grip 1/4 To 2, Hole Prep Center Lines (in.) 1-1/2, Mounting Hole Dia. (in.) 7/8, Panel Opening Length (in.) 7/8, Panel Opening Width (in.) 7/8, Panel Through Hole/screw Size 7/32, Hardware Included, Includes M4 Mounting Screw And Lockwasher (1), Cam Set Screw (1), Cam (1)

Cam, Straight, Zinc Finish, Cam Length (In.) 2-1/4, Cam Width (In.) 5/8, Max. Latching Distance (In.) 2-1/4 Padlockable Cam LockCompatible with most standard padlocks having a shackle up to 3/8 dia. Suitable for drawers, doors, and locker applications. Includes 7/8 and 1-1/4 straight cams.

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a hexagonal hole supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner... Less

McGill CYR-2 1/4-S Cam Yoke Roller NIB SPECIFICATION Bullseye Catalog #:30285 Weight: 1 lbs 3 oz CONTACT INFO:Contact us Monday - Friday 8am-4pm EST with any questions.Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES, LLC 221 US Highway 20 Suite B Middlebury, IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustria l@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price.

This high quality long-life Presair Air Switch has a 1/8” side spout and accepts standard 1/8” tubing. MagicTrol Radial 4 function sequencing with a green cam. 21A – 250 VAC 1 HP – 125 VAC 2 HP – 250 VACThe Presair MagicTroll Radial Air Switch is used to sequentially switch up to four individual pieces of equipment. Rated at 20 amps per hole. Each time an air pulse is applied a stepping cam is rotated through four positions actuating a combination of 2 or 3 micro-switches. A high volume switch is required for activation. Product notes: Side spout mounting. Identical to 611448 and Pres Air Trol MRG-311A.

Cam, Straight, Zinc Finish, Cam Length (In.) 1-1/4, Cam Width (In.) 5/8, Max. Latching Distance (In.) 1-1/4 Padlockable Cam LockCompatible with most standard padlocks having a shackle up to 3/8 dia. Suitable for drawers, doors, and locker applications. Includes 7/8 and 1-1/4 straight cams.

Dennis Kirk stocks a large selection of Comet cam arms for all 100, 101, 102, 108-C, 108-EXP and 108 4-PRO clutchesRefer to the Comet tuning manual to help select the proper profileTo determine the proper cam arm weight for a 108

The Dixon Type C brass cam and groove fitting has a straight body and two openings for connecting two hoses or pipes with cam and groove fittings. It has one female cam coupler end for connecting to male groove adapters and one hose shank end for connecting to hoses (Type C). The body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and it has cam lock levers for locking the fitting's male groove adapter into female cam couplers. A nitrile butadiene rubber (Buna-N) seal provides a leak-tight fit that is rated for petroleum service, ethanol to E100, and biodiesel to B20. This Dixon cam and groove fitting is suitable for use in commercial or industrial flow systems, such as water transport and treatment, waste management, and in... Less