Caliber Sports and Outdoors - Shopping.com
Showing results for "caliber"
Results 1 - 40 of 1500+

Otis Small Caliber 17 to 25...

$34.99
MidwayUSA Otis Small Caliber 17 to 25 Caliber Cleaning Kit
+ $4.99 shipping
/otis-small-caliber-17-to/PgNVAGn2aZgFT4J1pKTdUA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This Otis Small Caliber Cleaning System was designed for use on .17 caliber through .25 caliber rim-fire, center-fire and air rifles. It includes two .17 caliber Memory-Flex Cables, a .17 caliber T-handle, small caliber patches, airgun cable thread connector, .17 and .22 caliber short brushes, and a 1/2 oz tube of Otis O85 Ultra Bore Solvent. Using the all-in-one solvent, you can now clean, lubricate, and protect your firearm in one step. 5/40 threadTechnical Information: Otis Small Caliber 17 to 25 Caliber Cleaning System
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 35 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/WHOXMjSk321pgn0ZHNDHRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Forster Power Case Trimmer...

$22.99
MidwayUSA Forster Power Case Trimmer Cutter Shaft 17 Caliber
+ $4.99 shipping
/forster-power-case/GEvPf-zDZoWHFCOHeVC9iw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Forster Power Case Trimmer 17 Caliber Cutter Shaft is a necessary item for reloaders using their Forster Power Case Trimmer for trimming 17 caliber brass cases. Technical Information Fits: Forster Power Case Trimmer Function: 17 Caliber Cutter Shaft for trimming 17 caliber brass cases Material: Steel Notes: Necessary for trimming 17 caliber brass cases
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 20 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/Sn8NKory5i_eQO0nKU6z1w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Silencerco Omega Suppressor...

$1,130.00
Brownells Silencerco Omega Suppressor Multi Caliber Quick Detach - Omega Suppressor Multi Cal Qd Mount
+ $15.95 shipping
/silencerco-omega/LvuxHjuwCq86wRRvrBGrZQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
Silencerco's Omega suppressor is a lightweight, compact, versatile .30 caliber suppressor. Constructed of titanium, stainless steel, and Stellite the Omega is both full-auto and magnum rated. The unique design features an integrated Anchor Brake to provide an additional reduction in recoil. In addition to its performance, the Omega's design allows for maximum user adaptability and convenience. Each Omega comes with a 5/8×24 direct thread mount, a fast attach Active Spring Retention (ASR) mount complete with a Specwar ASR muzzle brake, and an Anchor Brake. Mfg: Silencerco
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 17 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/xCvTGCB-M6RF94ifToJXRw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 30 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/zPtl1hHWShoL6bt8rugFFQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Otis Cleaning Kit All Caliber

$39.99
MidwayUSA Otis Cleaning Kit All Caliber
+ $4.99 shipping
/otis-cleaning-kit-all/n4dSpLqGKZkHRk1FILHFuA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Otis All Caliber Rifle Cleaning System is ideal for all rifles including lever actions, bolt actions, and autoloaders. This premium cleaning system will clean all rifles from .17 caliber through .45 caliber. This kit contains three Memory-Flex cleaning rods; a 30 cleaning rod, an 8 chamber cleaning rod, and a 34 small caliber cleaning rod with a forged brass slotted tip. Also included are two solid brass slotted tips, two brass obstruction removers, a rod connector, a T-handle, a .5 oz tube of Otis O85 Ultra Bore Solvent, all-caliber cotton cleaning patches, and the .22 and .35 caliber bore brushes. The black nylon case comes standard with a locking zipper and belt loop attachment. Technical Information: Otis Rifle Cleaning System All Caliber Thread size: 8/32
More

Hornady Rim Thickness Gauge...

$30.49
MidwayUSA Hornady Rim Thickness Gauge 17-22 Caliber
+ $4.99 shipping
/hornady-rim-thickness/A7t67ozxuhoshuL4Xb9jQQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Rim Thickness Gage is perfect for rim fire enthusiasts who demand nothing but the utmost consistency. The gage allows the shooter to sort ammo by the rim thickness to find all ammunition that has similar ignition qualities to improve accuracy. This gage attaches to a set of calipers and will measure the rim thickness on 17 and 22 caliber ammunition. Technical Information Fits: Any 6 dial caliper Function: Measure rim thickness of rim fire ammunition Material: Aluminum and brass Notes: Includes bushings for use with all 17 and 22 caliber ammo
More

Ultrasonic Colt 6mm Caliber...

$19.99
Academy Sports and Outdoors Ultrasonic Colt 6mm Caliber Spring Pistol (0806481320855)
+ $7.88 shipping
/ultrasonic-colt-6mm/XnGaJViKxf1xK3RV3frKbA==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The Ultrasonic Colt 6mm Caliber Spring Pistol features polished finish BBs and a compact spring pistol.
More

L.E. Wilson Case Trimmer...

$25.99
MidwayUSA L.E. Wilson Case Trimmer Cutter 17, 20 Caliber
+ $4.99 shipping
/le-wilson-case-trimmer/Cmb6Y8J0iLu1JlvUZouU2A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The L.E. Wilson Case Trimmer 17 caliber cutter is the perfect accessory for any reloader looking to trim 17 caliber cases utilizing their L.E. Wilson Case Trimmer. Technical Information Fits: L.E. Wilson Case Trimmer Function: 17 Caliber cutter Material: Steel Notes: Special cutter designed specifically for trimming the small necks found on 17 caliber cases.
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 375 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/E4H2aVEAqYPbTHXNnrjfHw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

K&M Carbide Cutting Pilot 20...

$38.99
MidwayUSA K&M Carbide Cutting Pilot 20 Caliber
+ $4.99 shipping
/km-carbide-cutting-pilot/hgslFTaxjb5aWHNVaegD5g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesMade Specifically for the K&M Neck Turning ToolCarbide reduces friction caused while turning brass Cutting eeth on end will remove the dreaded case doughnut This pilot is ground from carbide material and also has cutting teeth ground into the end for removal of a case doughnut. Technical InformationMateri al: CarbideFits: K&M Neck Turning Tool
More

Double-Alpha Golden Multi...

$29.95
MidwayUSA Double-Alpha Golden Multi Caliber Cartridge Gauge 9mm, 38 Super, 40 S&W, 45 ACP Anodized Aluminum
+ $4.99 shipping
/doublealpha-golden-multi/oyv2ZIM2DpeLpZT0S_1lqw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Double Alpha compact 4 pocket gauge offers you all 4 popular calibers in one piece - 9mm, .38Super, .40S&W and .45ACP. The gauge is machined from top quality aluminum and anodized in gold color. The gauge pockets are finished using Clymer chamber finishing reamers, to ensure absolute correct dimensions. The Golden Multi Caliber Cartridge Gauge is small enough to fit into any pocket or tool box. The height is purposely cut shorter than other gauges, so that the tip of the bullet head sticks out. If a bullet gets stuck, as reloaded ammo often does - you can simply push it loose from below with your finger, without having to pick up a tool. It includes a small eyelet which allows you to hang it on a key chain. A must have item in every range bag! Technical Information: Anodized aluminum... Less
More

CASE Camo Caliber Zytel...

$48.95
Deadwood Knives CASE Camo Caliber Zytel Hunter Ridgeback Knives
Free Shipping
/case-camo-caliber-zytel/BeI9Nj2N_v3mBi1jvi6jMA==/info
Deadwood Knives
IN_STOCK ( In stock )
Store not rated
Free Shipping
Made in the U.S.A., this Hunter Ridgeback knife is made of Tru-Sharp Surgical Stainless Steel and Camo Caliber Zytel Handle. This Full Tang Blade W.R. Case & Sons Cutlery Co. 18336 CA18336 is 8 1/2 inches. Included with this knife is a Black, Nylon Belt Sheath. RIDGEBACK SS 021205183367
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 323 Caliber, 8mm
+ $4.99 shipping
/hornady-neck-turning-tool/2BgvN_Eg1PvVbDdNgdeoHg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 270 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/51Ay4ghnQfxN0yz2d2h9Sg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 22 Caliber
+ $4.99 shipping
/hornady-neck-turning-tool/LHXzVDf1ikPjLovX15YAEA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

Hornady Lock-N-Load Case Prep...

$20.99
MidwayUSA Hornady Lock-N-Load Case Prep Center Large Caliber Deburring Tool
+ $4.99 shipping
/hornady-locknload-case/LiBwPvMQYXZqKPpVbeX9Rg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady is known for making high quality reloading equipment. The Hornady Large Caliber Deburring Tool is an excellent piece of equipment for the reloader looking to gain every ounce of accuracy out of their handloads. Deburring the outside of the case neck is a crucial step during the reloading sequence. This steps helps to remove slight imperfections on outside of the case neck which is often present on new brass and freshly trimmed brass. A case only needs to be deburred before the initial loading then any time the case is trimmed. Technical Information Fits: Large Caliber Deburring Tool works for cartridges between 30 Caliber and 50 Caliber Function: Removed excess brass from the outside of a case mouth. Material: Steel Notes: This tool is threaded 8-32 so it will work in the Hornady... Less
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 264 Caliber, 6.5mm
+ $4.99 shipping
/hornady-neck-turning-tool/Q0mBD2HwOPaX4RdHWS0oBQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

K&M Carbide Cutting Pilot 25...

$38.99
MidwayUSA K&M Carbide Cutting Pilot 25 Caliber
+ $4.99 shipping
/km-carbide-cutting-pilot/QewBmcghV54B9H2HPfEPCg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesMade Specifically for the K&M Neck Turning ToolCarbide reduces friction caused while turning brass Cutting eeth on end will remove the dreaded case doughnut This pilot is ground from carbide material and also has cutting teeth ground into the end for removal of a case doughnut. Technical InformationMateri al: CarbideFits: K&M Neck Turning Tool
More

Redding Case Trimmer Titanium...

$28.69
MidwayUSA Redding Case Trimmer Titanium Cutter 17, 20 Caliber
+ $4.99 shipping
/redding-case-trimmer/iv4jH9jqZ7V8CH6EnQNO4Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Case Trimmers are designed to cut cases by hand fast, squarely and accurately. This titanium coated cutter is designed to trim 17 and 20 caliber cases. Technical Information Fits: Redding Case Trimmers Function: Titanium cutter to trim 17 and 20 caliber cases Material: Titanium Nitride coated high speed steel Notes: This cutter requires a 5/32 shank pilots (Item# 850-522 is the 17 caliber pilot and Item# 850-982 is the 20 caliber pilot)
More

K&M Carbide Cutting Pilot 17...

$38.99
MidwayUSA K&M Carbide Cutting Pilot 17 Caliber
+ $4.99 shipping
/km-carbide-cutting-pilot/rNFjr-cS_fks8Pmq5OHUXQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesMade Specifically for the K&M Neck Turning ToolCarbide reduces friction caused while turning brass Cutting eeth on end will remove the dreaded case doughnut This pilot is ground from carbide material and also has cutting teeth ground into the end for removal of a case doughnut. Technical InformationMateri al: CarbideFits: K&M Neck Turning Tool
More

Showman 22 Caliber Tooled Gun...

$69.99
Chicks Discount Saddlery Showman 22 Caliber Tooled Gun Holster With Belt
+ $11.99 shipping
/showman-22-caliber-tooled/0xZRan-gWctvSUt8scww8g==/info
Chicks Discount Saddlery
IN_STOCK ( In stock )
Store not rated
img SRC=http://www. chicksaddlery. com/Merchant2/gra phics/00000001/Sh owmanLogo.
More

Kingman Spyder Opus .50...

$70.77
ANSgear Paintball Kingman Spyder Opus .50 Caliber Paintball Gun - Silver Grey
No Shipping Info
/kingman-spyder-opus-50/LznE9rvdwZZ-0-fwZMlE9w==/info
ANSgear Paintball
IN_STOCK ( In stock )
Store not rated
Welcome to the next generation of paintball! The .50 Caliber Spyder Opus takes Kingman's proven paintball technology, adds some advancement, and provides the player with a high quality paintball gun. The Opus is a mechanical semi-automatic paintball gunIntroducing the Kingman Spyder Opus .50 caliber paintball Gun. The Spyder Opus is the latest addition to the Kingman line of entry paintball guns. Built around the classic blowback design, the Kingman Opus features the use of the new 50 caliber paintball.The Spyder .50 Caliber paintball brand is new for 2010. It is smaller, lighter and more efficient product line by reducing the standard .68 Caliber paintball to this new .50 Caliber size. All related equipment is smaller and lighter than .68 Caliber gear like the marker, loader, tank and... Less
More

RCBS Competition Seater Plug...

$13.49
MidwayUSA RCBS Competition Seater Plug Assembly 27 Caliber
+ $4.99 shipping
/rcbs-competition-seater/4Yf-y39c61t2VvTDmph3_g==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Replacement part for use in RCBS Competition Die only. Caliber specific. Technical InformationMateri al: Steel Notes: Replacement Seater Plug for RCBS Competition Dies. This plug assembly will work with the 270 caliber dies.
More

RCBS Competition Seater Plug...

$13.49
MidwayUSA RCBS Competition Seater Plug Assembly 30 Caliber
+ $4.99 shipping
/rcbs-competition-seater/gMi3FKwG9oRppTGjue3EwA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Replacement part for use in RCBS Competition Die only. Caliber specific. Technical InformationMateri al: Steel Notes: Replacement Seater Plug for RCBS Competition Dies. This plug assembly will work with the following caliber die sets: 30-06 Springfield and 308 Winchester.
More

CASE Camo Caliber Zytel...

$48.95
Deadwood Knives CASE Camo Caliber Zytel Hunter Ridgeback Knives
Free Shipping
/case-camo-caliber-zytel/1BXe4sQ12PIO_j4pUDj_Tw==/info
Deadwood Knives
IN_STOCK ( In stock )
Store not rated
Free Shipping
Made in the U.S.A., this Hunter Ridgeback knife is made of Tru-Sharp Surgical Stainless Steel and Camo Caliber Zytel Handle. This Full Tang Blade W.R. Case & Sons Cutlery Co. 18337 CA18337 is 8 1/2 inches. Included with this knife is a Black, Nylon Belt Sheath. RIDGEBACK SS 021205183374
More

Montana Precision Swaging Wad...

$28.99
MidwayUSA Montana Precision Swaging Wad Cutter Punch 38 Caliber
+ $4.99 shipping
/montana-precision-swaging/-8SL6OR4pXVNP3p8-1Jmow==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Montana Prescision Swaging offers a complete line of blackpowder shooting supplies, including this wad cutter punch. This punch makes it easy for shooter to create their own wads to their specific requirements. Choose the material and thickness to fit your needs, and save money at the same time. Technical Information Fits: Cuts through wad material (thin cork, plastic or felt) Function: Allow shooter and reloader to create their own wads Material: Steel Size: 0.375 Diameter Notes: Punch is designed to pressed or driven through material for wads used between the powder and the bullet in a black powder cartridge.
More

SIG Sauer .177 Caliber Spring...

$16.99
Academy Sports and Outdoors SIG Sauer .177 Caliber Spring Pistol (0806481288087)
+ $7.40 shipping
/sig-sauer-177-caliber/A2zzwT8An-Zf7dmALV7w0A==/info
Academy Sports and Outdoors
IN_STOCK ( In stock )
Store not rated
The SIG SAUER .177 Caliber Spring Pistol features a 70-round BB capacity and a smooth bore barrel.
More

Men's Top of the World Oregon...

$22.95
FansEdge Men's Top of the World Oregon Ducks White Caliber Visor
+ $4.99 shipping
/mens-top-of-the-world/KkQ6QB2XPH5M0e3ln7hLBQ==/info
FansEdge
IN_STOCK ( In stock )
Just like your Oregon Ducks deploys multiple formations to gain the victory, you can use a variety of graphics to earn best fan status with this Top of the World Caliber visor! Raised embroidery shows off your Oregon Ducks colors on the front of this visor and metal team lettering with a metallic finish shimmers from the side. The comfortable cotton band on the inside of this visor won't let anyone see you sweat when your Oregon Ducks are in a tough battle.
More

Hornady Powder Funnel Adapter...

$9.99
MidwayUSA Hornady Powder Funnel Adapter 17 to 20 Caliber
+ $4.99 shipping
/hornady-powder-funnel/2WMlP_kwYY-jPD0r6tyL7A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Powder Funnel Adapter is made to fit the Hornady powder funnels, and allows you to use their Hornady powder funnel for the smaller 17 and 20 caliber cartridges. Technical Information: Material: Aluminum Features: Fits 17 to 20 caliber cases Notes: Will also fit MTM and some other funnels
More

MCR Bullet Meplat Uniforming...

$99.99
MidwayUSA MCR Bullet Meplat Uniforming Tool 308 Caliber
+ $4.99 shipping
/mcr-bullet-meplat/67D8Wv2gzMJT8gkTnzP9YA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This tool allows the reloader to remove the unevenness in the nose of the bullet. This results in consistent projectiles, tighter groups and increased long range consistency. One-piece, stainless steel tool works for any weight bullet in the assigned calibers to create a burr free hollow point with no damage done to the bullet. Used by some of the top shooters in the world for 1,000 yard bench-rest, high power and long range hunting. Technical Information Notes: consists of a caliber-specific tool body, a cutter and a hollow-point deburring tool Information from the manufacturer: Montour County Rifles Meplat Uniforming Tool allows the re-loader to equalize the ballistic coefficient (B.C.) of any kind weight bullet. This is done by removing the uneveness of a bullets meplat. (the nose of... Less
More

Hornady Neck Turning Tool...

$10.29
MidwayUSA Hornady Neck Turning Tool Mandrel 284 Caliber, 7mm
+ $4.99 shipping
/hornady-neck-turning-tool/GQeZUPEaWZVUReskysRoPw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Neck Turning Mandrels are caliber specific mandrels designed to work with the Hornady Neck Turning Tool (Sold Separately). They assure that cases are properly aligned with the tool when turning down case necks for consistent uniformity. Technical Information Fits: Hornady Neck Turning Tool Function: Assure proper alignment of cases for turning the neck Material: Steel Notes: Caliber located in the description
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 20 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/WwTFEjF3q0ZugOLYRF-Fag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

MTM Universal Powder Funnel...

$10.79
MidwayUSA MTM Universal Powder Funnel Set 17 to 45 Caliber
+ $4.99 shipping
/mtm-universal-powder/YGvY4O0LUeofwgcZRuPOMA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The MTM Universal Powder Funnel Set is perfect for the reloader looking to have a powder funnel kit that will work with every case between 22 and 45 caliber. Technical Information: Material: Plastic Drop Tube Length:4 fits 22 to 45 caliber Features: Storage Case Color: Red funnels, clear case Kit Includes: Adapter 1, .17 to .22 Adapter 2, .22 to .29 Adapter 3, .30 to .45 Adapter 4, .22 to .50 designed for WSM, WSSM and Rem Ultra Mags
More

K&M Expand Mandrel for Expand...

$11.99
MidwayUSA K&M Expand Mandrel for Expand Iron Assembly 25 Caliber
+ $4.99 shipping
/km-expand-mandrel-for/jOogCdYkTMSfz0UF15eC4w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesCaliber specific expander mandrel fits the K&M Expand IronFirst step prior to neck turning Virgin/competitio n Brass isn't quite ready to Neck Turn when you buy it. And the commercial die manufacturers have no set standards for the Expander button in their dies. Large variations from manufacturing to manufacturing and even within a given manufacturing makes it necessary to properly size the inside diameter before turning. Don't be fooled by slick talk. The turning pilot cannot be used to correctly expand the case neck because of the elasticity of the brass; it will spring back and be too tight for proper Neck Turning. The EXPAND MANDRELS will iron out (smooth) and slightly expand the case neck so the brass will spring back to the correct size needed to neck Turn your Pet Brass... Less
More

K&M Carbide Cutting Pilot 22...

$38.99
MidwayUSA K&M Carbide Cutting Pilot 22 Caliber
+ $4.99 shipping
/km-carbide-cutting-pilot/0r3TuRiNfxRmwJGlpfvg4Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesMade Specifically for the K&M Neck Turning ToolCarbide reduces friction caused while turning brass Cutting eeth on end will remove the dreaded case doughnut This pilot is ground from carbide material and also has cutting teeth ground into the end for removal of a case doughnut. Technical InformationMateri al: CarbideFits: K&M Neck Turning Tool
More

K&M Carbide Cutting Pilot 338...

$38.99
MidwayUSA K&M Carbide Cutting Pilot 338 Caliber
+ $4.99 shipping
/km-carbide-cutting-pilot/5PQCgQuydkwwMGCpP2BzvQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
FeaturesMade Specifically for the K&M Neck Turning ToolCarbide reduces friction caused while turning brass Cutting eeth on end will remove the dreaded case doughnut This pilot is ground from carbide material and also has cutting teeth ground into the end for removal of a case doughnut. Technical InformationMateri al: CarbideFits: K&M Neck Turning Tool
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2016 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388
http://img.shoppingshadow.com/jfe/JavaFrontEnd-jfe.2016.sp17.xss-30388