CablesAndKits

Cisco Catalyst 4500 Series AC Power Cord, CAB-US620P-C19-US, 14' For use with Cisco PWR-C45-4200ACV Approvals: UL, CSA Supply End - NEMA 6-20P Equipment End - IEC-60320-C19 Length: 14'

AC Power Cord, 5-15P to C15, 14 AWG, 20' Approvals: UL, CSA Supply End - NEMA 5-15P Equipment End - IEC-60320-C15 Wire Type- 14 AWG 3 SJT Rating- 15A/125V Length- 20 feet

Cisco Catalyst 4500 Twist Lock AC Cord, CAB-L620P-C19-US For use with PWR-C45-4200ACV and possibly other power supplies. Approvals: UL, C-UL Supply End - NEMA L6-20P Equipment End - IEC-60320-C19 Length: 15ft

AC Power Cord, 6-15P to C15, 14 AWG, 8' Approvals: UL, CSA Supply End - NEMA 6-15P Equipment End - IEC-60320-C15 15A/250V Length: 8 feet

Cisco High Density RS-232 Splitter Cable, CAB-HD4-232FC, 10' Network Cable Type- Serial RS-232 cable Length- 10 ft Connector(s)- (1) 68 pin SCSI - female Connector(s) (Other Side)-(4) DB-25 - female Condition: New

C20 to C19 | 10' | 12 AWG | Grey | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

AC Power Cord - Australia AS3112 to C15, 2.5M Supply End - Australia Plug AS3112 Equipment End - IEC-60320-C15 Wire Type: H05VVF3G1.5mm² 3 10A/250V Length: 2.5 Meters (8.2 Feet)

C20 to C19 | 10' | 12 AWG | Orange | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

C20 to C19 | 10' | 12 AWG | Purple | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

C20 to C19 | 15' | 12 AWG | Black | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

C20 to C19 | 10' | 12 AWG | Yellow | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

C20 to C19 | 10' | 12 AWG | Red | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20 amps... Less

Cisco 14-pin to 22-pin RPS cable, 5ft, CAB-RPS2300, NEW This Cisco cable is used with supported switches with a 22-pin connector on one end and a 14-pin connector on the other end. Length: 5ft Connectors: 14-pin and 22-pin Condition: New in original packaging

HP Power Cord L6-30P to C19, 2.5M, E7805A Can also be used for other purposes that call for a L6-30P to C19 Cord. Approvals: UL, C-UL Supply End - NEMA L6-30P Equipment End - IEC-60320-C19 Rating-20A/250V Length - 2.5m - 8'

Cisco T3/E3 Interface Coax Cable (BNC Male to BNC Male) - 25 Feet, CAB-T3/E3-25 Connectors: BNC Male to BNC Male Length: 25 Feet

C20 to C19 | 10' | 12 AWG | Blue | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

AC Power Cord - Japan JIS 8303 to C15, 2.5M Supply End - Japanese Plug JIS 8303 Equipment End - IEC-60320-C15 Wire Type: VCTF3G1.25mm² 3 12A/125V Length: 2.5 Meters (8.2 Feet)

Cisco High Density RS-232 Splitter Cable, CAB-HD4-232MT Network Cable Type- Serial RS-232 cable Length- 10 ft Connector(s)- (1) 68 pin SCSI - male Connector(s) (Other Side)-(4) DB-25 - male Condition: New

AC Power Cord, L6-30P to L6-30R, 10 AWG, 10' Approvals: UL, CSA Supply End - NEMA L6-30P Equipment End - NEMA L6-30R Wire Type - 10 AWG 3 SJT Rating- 30A/250V Length- 10 feet

AC Power Cord, L6-15P to C19, 14 AWG, 5' Approvals: UL, C-UL Supply End - NEMA L6-15P Equipment End - IEC-60320-C19 Wire Type - 14 AWG 3 SJT Rating- 15A/250V Length- 5 feet

AC Power Cord, European Plug Schuko CEE 7/7 Right Angle to C19, 2.5M Approvals: European Supply End - European Plug Schuko CEE 7/7 Right Angle Equipment End - C19 Wire Type- H05VVF3G1.5mm² 3 Rating- 15A/250V Length: 2.5 Meters (8.20 ft)

AC Power Cord - Switzerland SEV 1011 to C15, 2.5M Supply End - Swiss Plug SEV 1011 Equipment End - IEC-60320-C15 Wire Type: H05VVF3G1.0mm² 3 10A/250V Length: 2.5 Meters (8.2 Feet)

AC Power Cord - India BS 546 to C15, 2.5M Supply End - India BS 546 Equipment End - IEC-60320-C15 Wire Type: H05VVF3G1.5mm² 3 15A/300V Length: 2.5 Meters (8.2 Feet)

AC Power Cord, L6-20P to C13, 14 AWG, 15' Approvals: UL, CSA Supply End - NEMA L6-20P Equipment End - IEC-60320-C13 Wire Type - 14 AWG 3 SJTW Rating- 15A/125V Length- 15 feet

Cisco C5 AC Power Cable, 5-15P to C5, 6', CAB-AC-C5= Approvals: UL, CSA Supply End - NEMA 5-15P Equipment End - IEC-60320-C5

AC Power Cable, 16AWG, 6', CAB-16AWG-AC 6' version of the CAB-16AWG-AC Approvals: UL, CSA Supply End - NEMA 5-15P Equipment End - IEC-60320-C13

C14 Female end to C13 Male Right Angle. Commonly used to connect a monitor to a computer's power supply output and serveral other uses. May also be used as an extension to increase the length of an existing standard AC cable. Supply End - IEC-60320-C14 Equipment End - IEC-60320-C13 Right Angle Rating- 10A-15A/250V Length- 12 feet

C14 to C19 | 6' | 14 AWG | Orange | Male to Female Colored power cords are a great way to identify and trace power cord runs in nearly any application. Installers, technicians and managers can easily identify attributes (amperage, voltage redundancy) by a quick visual check and color identification. When power redundancy is required, using colored power cords to identify UPS and PDU origination is instant. Whether the cords are used in a basic or dense instillation, these colored cords save time and money. Equipment End: C19, Or IEC60320-C19 is a 3 prong, female connector commonly used on the end of high current computer and networking device power cords. This is likely the most common equipment end cord available today. This plug has a maximum current rating of 16 amps at 16-18AWG, 20... Less

AC Power Cord, 6-15P to C13, 10' Approvals: UL, CSA Supply End - NEMA 6-15P Equipment End - IEC-60320-C13 Wire Type- 14 AWG 3 SJT Rating-15A/250V Length- 10 feet

AC Power Cord for use in Japan Approvals: PSE Supply End - Japanese Plug JIS 8303 Equipment End - IEC-60320-C13, Right Angle Wire Type- VCTF3G1.25mm² 3 Rating- 12A/125V Length: 2.5 Meters (8.20 ft)