CRL

Length: 118 in (3 m) Material: Stainless Steel Extremely Strong and Durable Easy to Cut to Desired Length and Install Limitless Design Choices The CRL 2mm Stainless Steel 118 Inch Cable for the Cable Display System provides the connection for the ceiling mount fittings, floor base fittings and the shelf brackets. The Cable is cut to the desired length, leaving approximately 4 inch (100 millimeter) for adjustment and tensioning purposes. The cut size Cable is then attached to the Floor Base Fitting; secondly, slide onto the Cable the desired number of Shelf Brackets, and lastly, insert the Cable into the Ceiling Mount Fitting and pull tight. Once the shelves are installed, any slack in the Cable can be adjusted at both the ceiling and base fittings. One each per package. Important... Less

Extremely Strong and Durable Easy to Cut to Desired Length and Install Limitless Design Choices The CRL 2mm Stainless Steel 118 Inch Cable for the Cable Display System provides the connection for the ceiling mount fittings, floor base fittings and the shelf brackets. The Cable is cut to the desired length, leaving approximately 4 inch (100mm) for adjustment and tensioning purposes. The cut size Cable is then attached to the Floor Base Fitting; secondly, slide onto the Cable the desired number of Shelf Brackets, and lastly, insert the Cable into the Ceiling Mount Fitting and pull tight. Once the shelves are installed, any slack in the Cable can be adjusted at both the ceiling and base fittings. Length: 118 in (2950mm) Material: Stainless Steel Important Note: WEIGHT LIMITATIONS: When... Less

Color: Aluminum Shelf Thickness: 3/8 to 1/2 in (10 to 12 mm) Put Up a Shelf with Only Two Screws Works on Any Shelf Up to 16 (406 mm) Deep Strong; Holds Up to 100 Pounds (45 kg) Two Sizes and Finishes to Choose From CRL's Cable Shelf Brackets will help provide low-cost, high-style storage. They can hold any shelving material including wood, glass and marble. They can also be used for utility shelving. The brackets come in natural aluminum or anodized black finish and are available for 3/8 to 1/2 inch (10 to 12 millimeter) and 5/8 to 3/4 inch (16 to 19 millimeter) thick shelves. Constructed of stainless steel cable with aluminum fittings which help to hold up to 100 pounds. The design supports the front and rear of the shelf in suspension. Includes a pair of brackets, round back plates,... Less

Color: Black Shelf Thickness: 5/8 to 3/4 in (16 to 19 mm) Put Up a Shelf with Only Two Screws Works on Any Shelf Up to 16 (406 mm) Deep Strong; Holds Up to 100 Pounds (45 kg) Two Sizes and Finishes to Choose From CRL's Cable Shelf Brackets will help provide low-cost, high-style storage. They can hold any shelving material including wood, glass and marble. They can also be used for utility shelving. The brackets come in natural aluminum or anodized black finish and are available for 3/8 to 1/2 inch (10 to 12 millimeter) and 5/8 to 3/4 inch (16 to 19 millimeter) thick shelves. Constructed of stainless steel cable with black aluminum fittings which help to hold up to 100 pounds. The design supports the front and rear of the shelf in suspension. Includes a pair of brackets, round back plates,... Less

Unique, design conscious brackets for securely installing shelving of any material to your wall. For 3/8 to 1/2 thick shelf (usually glass). Aluminum fittings with stainless steel cables. Works on any shelf up to 16 deep! Mounts with only 2 screws! Shelving not included. Two cables per package - enough for one shelf. The brackets can support up 100 pounds if installed correctly into a stud, and depending on the style of shelf used. Order today and bring new life (and space) to your walls!

Extremely Strong and Durable Easy to Cut to Desired Length and Install Limitless Design Choices The CRL 2mm Stainless Steel 196 Inch Cable for the Cable Display System provides the connection for the ceiling mount fittings, floor base fittings and the shelf brackets. The Cable is cut to the desired length, leaving approximately 4 inch (100mm) for adjustment and tensioning purposes. The cut size Cable is then attached to the Floor Base Fitting; secondly, slide onto the Cable the desired number of Shelf Brackets, and lastly, insert the Cable into the Ceiling Mount Fitting and pull tight. Once the shelves are installed, any slack in the Cable can be adjusted at both the ceiling and base fittings. Length: 196 in (4900mm) Material: Stainless Steel Important Note: WEIGHT LIMITATIONS: When... Less

Permits the 2mm Stainless Steel Cable to be attached to a Drop Ceiling Available in Several Finishes This CRL Brushed Nickel Ceiling Mount Fitting for the Cable Display System is an integral component of the Cable Display System since it provides a method of fastening the 2mm Cables into a drop ceiling. The Ceiling Mount Fitting comes with one washer and two nuts which attach to the sub-ceiling above the acoustical tile. The push tube adjustment part of the fitting is mounted underneath the tile. Once installed, the 2mm stainless steel cable is inserted into the fitting and pulled tight. Color: Brushed Nickel Diameter: 1/2 in (12mm) Important Note: WEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36kg.). Each shelf can bear a... Less

Permits the 2mm Stainless Steel Cable to be attached to a Drop Ceiling Available in Several Finishes This CRL Gold Plated Ceiling Mount Fitting for the Cable Display System is an integral component of the Cable Display System since it provides a method of fastening the 2mm Cables into a drop ceiling. The Ceiling Mount Fitting comes with one washer and two nuts which attach to the sub-ceiling above the acoustical tile. The push tube adjustment part of the fitting is mounted underneath the tile. Once installed, the 2mm stainless steel cable is inserted into the fitting and pulled tight. Color: Gold Finish Diameter: 1/2 in (12mm) Important Note: WEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36kg.). Each shelf can bear a total... Less

Use to Install 1/2 (12 mm) Cable Kit to Metal Component to CRL Cable System for 3/8 to 1/2 (10 to 12 mm) Glass Used when installing a 1/2 inch (12 millimeter) Cable Kit to metal. The overall length of the CRL Threaded Stud is 60 mm. The thread size is M6. Half of the Stud is threaded into the metal ceiling or floor metal support, and the other half connected through the Cover Disks to the cable end fittings. Length: 2-5/16 in. (60 mm) Thread Size: M6 Minimum Order: 1 Each

Base Diameter: 1-3/4 in (44.4 mm) Color: Chrome Hanger Diameter: 1/2 in (12.7 mm) Extremely Functional Fitting Can be Used on Floor, Wall or Ceiling Available in Several Finishes The CRL Chrome Plated Hanger Pipe Base Fitting for the Cable Display System rotates 180? as is one of the most versatile parts of this system allowing it to be used on the ceiling, floor or wall. Just mount, insert cable and tighten.The Cable Display System is a combination of slim stainless steel cables and other very attractively designed hardware components that, once combined with glass shelves, creates a frameless look that emphasizes the products being display. When installed, the shelf positions can easily be repositioned to change the look and function as needed.One each is the minimum order.Important... Less

Designed to Tighten the 2mm Cables The CRL Cable Turnbuckle for the Cable Display System is designed to create tension on the 2mm stainless steel cables. Used with the CB118 Cable Loop Securing Clamps , the hooks are connected to the Ringed Anchor Fitting (CB78) at one end and the Cable Loop Securing Clamp at the other end. Tension to the cable is applied by twisting the Turnbuckle. Color: Nickel Plated Adjustable Length: 4-3/4 to 6 in (120-152 mm) Important Note: WEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36kg.). Each shelf can bear a total weight of 20 lbs. (9kg.), when used with CB74, CB76 and CB78 Ceiling Mount Fittings. If CB112 and CB114 Hanger Pipe Base Fittings are properly anchored and used as ceiling... Less

C.R. LAURENCE PLKEY CRL Ultra-tec Cable Release Tool. This CRL Cable Release Tool is an innovative tool that allows the release of cable from Push Lock and Pull Lock type fittings before cables are tensioned. It fits 1/8 (3.2 mm) diameter cable..

C.R. LAURENCE PUL4SS CRL Ultra-tec 1/8 Pull-Lock Cable Fitting. CRL 1/8 Pull-Lock Cable fittings are designed for use with 1 x 19 L.H. lay strand only (1/8). They can be used with any tensioning device on the other end, but when used with swageless tensioners, both ends can be put on the cable by hand without any swaging or special tools. You can order your cables with a tensioner already on one end or you can install a tensioner on one end on site. Attach the tensioner on one end post, slip the CRL Pull-Lock fitting into the other end post and pull the cable all the way through the Pull-Lock fitting. Tension the cables, then cut the excess cable off on the back side of the fitting with a 4 right angle grinder or a cutting wheel that is used with your hand drill. Press on the stainless... Less

Extremely Functional Fitting Can be Used on Floor, Wall or Ceiling Available in Several Finishes The CRL Chrome Plated Hanger Pipe Base Fitting for the Cable Display System rotates 180° as is one of the most versatile parts of this system allowing it to be used on the ceiling, floor or wall. Just mount, insert cable and tighten. Color: Chrome Plated Finish Base Diameter: 1-3/4 in (44mm) Hanger Diameter: 1/2 in (12mm) Additional Product Information: The Cable Display System is a combination of slim stainless steel cables and other very attractively designed hardware components that, once combined with glass shelves, creates a frameless look that emphasizes the products being display. When installed, the shelf positions can easily be repositioned to change the look and function as needed... Less

Extremely Functional Fitting Can be Used on Floor, Wall or Ceiling Available in Several Finishes The CRL Chrome Plated Hanger Pipe Base Fitting for the Cable Display System rotates 180° as is one of the most versatile parts of this system allowing it to be used on the ceiling, floor or wall. Just mount, insert cable and tighten. Color: Brushed Nickel Plated Finish Base Diameter: 1-3/4 in (44mm) Hanger Diameter: 1/2 in (12mm) Additional Product Information: The Cable Display System is a combination of slim stainless steel cables and other very attractively designed hardware components that, once combined with glass shelves, creates a frameless look that emphasizes the products being display. When installed, the shelf positions can easily be repositioned to change the look and function as... Less

/8 (10 mm) Tempered Glass Included Mounts With Just Two Screws Available in Three Sizes CRL Cable Glass Shelf Kit offer a clean and simple, yet strong design. Constructed of stainless steel cable and aluminum fittings, when installed properly the shelf can hold up to 150 pounds (68 kilograms). The design supports the front and rear of the shelf in suspension. Kit Includes: 3/8 inch (10 millimeter) tempered glass with all flat polished edges, a pair of brackets, round back plates, two screws, plastics tabs and instructions. Color: Aluminum Shelf Size: 10 in x 24 in (254 x 610 mm) Glass Thickness: 3/8 in. (10 mm) Minimum Order: 1 Each

Color: Chrome Diameter: 9/16 in (14.3 mm) Height: 3/4 in (19 mm) Attractively Designed to Attach to Wood Flooring or Laminate Base Available in Several Finishes The CRL Chrome Plated, Short Round Floor Base Fitting for the Cable Display System has a set screw clamping system which allows fast tensioning of the cable system. The Short, Round Floor Base Fitting screws into a floor or a wood laminate base and gives the fixture designer options in terms of base fittings since the Long Round Floor Base Fitting also performs the same function.One each is the minimum order. (cable shown above is not included) Important NotesWEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36kg.). Each shelf can bear a total weight of 20 lbs. (9kg.),... Less

Attractively Designed to Attach to Wood Flooring or Laminate Base Available in Several Finishes The CRL Brushed Nickel Plated, Short, Round Floor Base Fitting for the Cable Display System has a set screw clamping system which allows fast tensioning of the cable system. The Short, Round Floor Base Fitting screws into a floor or a wood laminate base and gives the fixture designer options in terms of base fittings since the Long Round Floor Base Fitting also performs the same function. Color: Brushed Nickel Diameter: 9 /16 in (14 mm) Barrel Height: 3/4 in (19 mm) Important Note: WEIGHT LIMITATIONS: When properly installed, each column (4 cables) can bear a total weight of up to 80 lbs. (36kg.). Each shelf can bear a total weight of 20 lbs. (9kg.), when used with CB74, CB76 and CB78 Ceiling... Less