Bullet Primers Sports and Outdoors - Shopping.com

Category

Sport and Outdoor
Showing results for "bullet primers"
Results 1 - 40 of 1500+

Whidden Gunworks Bullet...

$220.00
MidwayUSA Whidden Gunworks Bullet Pointing Die System #1
+ $7.59 shipping
/whidden-gunworks-bullet/YJPRkfuV78_22rFixTeDaQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

(10) Stackable Clear Plastic...

$45.00
eBay (10) Stackable Clear Plastic Storage (reloading Brass Bullet Primers)
Free Shipping
/10-stackable-clear/OvGmtASaQeRbnWjAjzUcKw==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser. Click Here. Double your traffic. Get Vendio Gallery - Now FREE!10 Stackable Storage/Organizin g Bins to straighten up your reloading bench. Stock up as these are excellent see-through organizing bins to store and stack bullets, brass, primers, or any other kind of small supplies or equipment on your reloading bench.Try one out with a 1 item listing and or come back for more w
More

Whidden Gunworks Bullet...

$220.00
MidwayUSA Whidden Gunworks Bullet Pointing Die System #0
+ $4.99 shipping
/whidden-gunworks-bullet/gYd2B826cDlVChi0T2f7-w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Whidden Gunworks Bullet...

$220.00
MidwayUSA Whidden Gunworks Bullet Pointing Die System #2
+ $4.99 shipping
/whidden-gunworks-bullet/j7vnRI0vKwVudf-HhYT5TA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Head Bullet 84 SW BK Skis

$364.95
The-House.com Head Bullet 84 SW BK Skis
Free Shipping
/head-bullet-84-sw-bk-skis/4x9sdfxdO6wsnVcAMoQ9Gg==/info
The-House.com
IN_STOCK ( In stock )
Free Shipping
With the Bullet 84 HEAD introduces a Park and Pipe model for modern riders that demand total performance from their gear. The Bullet is a real new-school ski with uncompromised park abilities that loves the occasional stroll through the backcountry.Key Features of the Head Bullet 84 SW BK Skis: Sandwich twintip construction Extra durable ABS sidewalls Highly transparent UHM base Freestyle park/ pipe ski Sidecut: 121/ 84/ 110 @ 181 Radius: 20.2 @ 181 Dimensions: 161cm: 119/ 93/ 108; 171cm: 120/ 83/ 109; 176cm: 120/ 84/ 109; 181cm: 121/ 84/ 110
More

Redding Bullet Seating...

$39.49
MidwayUSA Redding Bullet Seating Micrometer #9081 (35 Remington, 375 H&H Magnum)
+ $4.99 shipping
/redding-bullet-seating/KVFtzBKd2PKDkyl4nawi3Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Chicago Skates Ladies Bullet...

$64.99
Walmart.com Chicago Skates Ladies Bullet Speed Skates, White, Size 4
Free Shipping
/chicago-skates-ladies/kR6fd1aEvHkdGaNUqVND5A==/info
Walmart.com
IN_STOCK ( In stock )
Free Shipping
These Chicago Skates Ladies Bullet Speed Skates feature low-cut speed boots with padded ankle collars and lace closures. These skates come with 57mm urethane wheels.
More

Lee Load-Master Small Primer...

$10.99
MidwayUSA Lee Load-Master Small Primer Feeder Trough Assembly (Replacement Part)
+ $4.99 shipping
/lee-loadmaster-small/0nrkVr8A1HpI8unrZIdyHA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Load-Master Small Primer Feeder Trough Assembly is the perfect addition for your Load-Master press. Lee engineers made a great design change to the primer feeder so primer sliders will no longer be damaged during operation. The new Primer Feeder Trough Assembly now replaces the old primer trough and cover, primer slider, and primer lever. Technical Information Fits: Lee Load-Master Progressive Press Function: Small Primer Feeder Trough Assembly Material: Plastic Notes: Replaces primer trough and cover, primer slider, and primer lever Searches for products like these typically include: Reloading Supplies, Reloading Presses, Reloading Press Parts & Accessories,Lee Press Parts
More

Lee Load-Master Large Primer...

$10.99
MidwayUSA Lee Load-Master Large Primer Feeder Trough Assembly (Replacement Part)
+ $4.99 shipping
/lee-loadmaster-large/TjKkXY7QEpdibeEOFJ2gDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Load-Master Large Primer Feeder Trough Assembly is the perfect addition for your Load-Master press. Lee engineers made a great design change to the primer feeder so primer sliders will no longer be damaged during operation. The new Primer Feeder Trough Assembly now replaces the old primer trough and cover, primer slider, and primer lever. Technical Information Fits: Lee Load-Master Progressive Press Function: Large Primer Feeder Trough Assembly Material: Plastic Notes: Replaces primer trough and cover, primer slider, and primer lever Searches for products like these typically include: Reloading Supplies, Reloading Presses, Reloading Press Parts & Accessories,Lee Press Parts
More

Lyman Cast Bullet...

$21.99
Brownells Lyman Cast Bullet Handbook-4th Edition
+ $7.95 shipping
/lyman-cast-bullet/c7G2c0utBdPF2Atj5LWgJQ==/info
Brownells
IN_STOCK ( In stock )
Store not rated
The Lyman Cast Bullet Handbook 4th Edition, is Lyman's first cast bullet data manual in over 30 years. The load data covers Lyman's complete line of rifle and pistol moulds, along with select moulds from other manufacturers. It includes new calibers such as the Ruger Compact Magnums and 327 Federal along with black powder loads for many popular older cartridges. Well known Guns Magazine writer and cast bullet enthusiast, Mike Venturino, shares his knowledge of the subject within the pages. Long awaited, the 4th Edition Lyman Cast Bullet Handbook is the new primer on cast bullet moulds and reloading. Mfg: Lyman
More

Rock Chucker Supreme Press...

$249.68
eBay Rock Chucker Supreme Press Handle Bullet Reloader Heavy Duty Case Forming Primer
Free Shipping
/rock-chucker-supreme/GS-lso494NhXHUnbxC70Ag==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Rock Chucker Supreme Press Handle Bullet Reloader Heavy Duty Case Forming Primer Rock Chucker press frame provides a full four inches of ram-bearing surface to rigidly support the one inch diameter main ram Handle is made of solid steel and features a comfortable ball-type handle grip Outstanding strength and versatility, the Rock Chucker Supreme is ideal for the beginner and pro alike Can also be upgraded to a progressive loader with the addition of a Piggyback - 4 Specifically for heavy-duty
More

Hornady Lock-N-Load Bullet...

$27.49
MidwayUSA Hornady Lock-N-Load Bullet Tube (40 S&W, 10mm)
+ $7.59 shipping
/hornady-locknload/2q011OBTDozgWghSsqIjeQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Features Feeds bullets into existing Hornady bullet feeder diesEliminates the need for a bullet feeder hopperMilled window in tube shows when it is almost emptySuitable for any progressive press with 7/8-14 thread die stationsFits 40 S&W, 10mm Turn any progressive press into an “ammunition factory” with the easy to use Hornady Lock-N-Load Bullet Tubes. Coupled with a Hornady Bullet Feeder die (sold separately), Lock-N-Load Bullet Tubes provide hand loaders a fast, flexible system that increases loading speed on any compatible progressive reloading press with 7/8-14 thread die-stations. With the Lock-N-Load Bullet Tubes, the hand loader can simply pre-load the tubes with bullets and place the tube in the top of their bullet feeder die. Tubes can fit 40+ bullets depending on caliber and... Less
More

Hornady Lock-N-Load...

$249.99
MidwayUSA Hornady Lock-N-Load Progressive Press Pistol Bullet Feeder Kit 110 Volt
+ $14.49 shipping
/hornady-locknload/RHmMBbVLAOs6uLIT6nn9bQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load Progressive Press Bullet Feeder Kit is designed to mount to any progressive press that takes standard 7/8-14 threaded dies. By connecting the Lock-N-Load bullet feeder you are able to increase your loading rate dramatically. When coupled with the Lock-N-Load case feeder (sold separately) progressive presses become a bench-mounted ammo factory. The easy-feed bullet hopper holds up to 200 pistol bullets and features and adjustable center plate and bullet feed wipers to ensure smooth feeding. Technical Information Technical Information Fits: Progressive presses that use 7/8-14 threaded dies Function: Feeds Jacketed or Plated Pistol bullets (9mm-45 Caliber) Features: Easy-feed bullet hopper, adjustable center plate, bullet feed wipers Material: Steel and plastic... Less
More

Hornady Impact Bullet Puller

$29.99
MidwayUSA Hornady Impact Bullet Puller
+ $4.99 shipping
/hornady-impact-bullet/LouZIZEfDEWB7JmFcRDu8Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Impact Bullet Puller is a handy tool for any reloading bench. The Impact Puller uses the power of inertia to quickly pull bullets from cartridges without damaging the bullet or brass. A few solid taps on a piece of wood will release the bullet. The puller is designed with a hollow head to capture the bullet and powder for reuse or disposal. Technical Information Type: Inertia Function: Bullet Puller Material: Plastic Notes: Works great with cast bullets Works with any rifle or pistol cartridge up to 45 caliber, provided they are up to 30-06 length. Searches for products like these typically include: Reloading Supplies,Bullet Pullers,Hand-Held Bullet Pullers
More

Lee Pro 1000, Load-Master...

$32.99
MidwayUSA Lee Pro 1000, Load-Master Progressive Press Bullet Feeder Kit 40 to 44 Caliber up to .65 Long
+ $7.59 shipping
/lee-pro-1000-loadmaster/CI2YhVyBduZazyrbt8R1Iw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Automatically feeds bullets into the mouth of the seating die. Aligns bullets more accurately than possible by hand. Increases the cyclic rate by 50 to 100%. Designed to fit the Pro 1000 and Load-Master Presses only. Technical Information Fits: Lee Pro 1000, Load-Master Progressive Press Function: Bullet Feed Kit Material: Plastic, Metal Kit Includes: Feeder tube, Stand, Hardware, Feed die and fingers for listed caliber Notes: Kit is complete for one bullet diameter and range of length. Converting to a different caliber and length will require different feed die and fingers. New seater die (shorter) required to seat bullets (not included). Pre-1992 presses require a new shellplate carrier (Available only from Lee Precision) Searches for products like these typically include: Reloading... Less
More

Bullet Weights 2oz Disc...

$4.74
Walmart.com Bullet Weights 2oz Disc Sinker, 8pc
+ $5.99 shipping
/bullet-weights-2oz-disc/TSg66nCOaYTrrs8NfOp35Q==/info
Walmart.com
IN_STOCK ( In stock )
Bullet Weights disc sinkers can be used either for fishing the surf or in a river. The unique design allows the sinker to lay flat on the floor, and prevents the sinker from rolling.
More

RCBS Pistol Bullet Feeder Die...

$26.29
MidwayUSA RCBS Pistol Bullet Feeder Die Kit (45 ACP)
+ $7.59 shipping
/rcbs-pistol-bullet-feeder/ca-Hus-H_bQELB2wy9CcCA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS is known for making high-quality reloading equipment. The pistol bullet feeder is no exception. Each kit comes with a caliber specific die and two bullet feeding tube. These dies are standard 7/8-14 threaded dies and will fit any standard reloading press; these dies are designed to speed up the reloading process on a turret or progressive reloading press. Each clear pistol bullet feeder tube holds between 20-25 bullets depending on the bullet weight and profile. The pistol bullet feeder places the bullet into the case of the mouth with the proper alignment so the bullet can be seated at the next station. One of the great aspects of the tube pistol bullet feeder is that it is versatile. The feeder will work with any type of bullet including: jacketed, plated, solid copper and cast or... Less
More

Redding Bullet Seating...

$39.49
MidwayUSA Redding Bullet Seating Micrometer #9080 (308 Winchester, 30-06 Springfield, 300 Winchester Short Magnum)
+ $4.99 shipping
/redding-bullet-seating/NH-Y5JE_gVJvAqb-I2uoDQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Redding Bullet Seating Micrometers are the perfect addition to any bullet seating die that utilizes 1/2-20 threads. For years Redding Competition Seating Dies have been known as one of the most accurate seating dies made because of their bullet seating micrometer that allows reloaders to fine tune seating depths to the most accurate for their load. These plugs are machined from quality steel alloy and hand finished and inspected to ensure the consistent, reliable performance. These seaters are a direct replacement for the original seating plugs and can easily be changed from one die to the next. There are two different micrometers available one for standard bullets that will work for most bullets including polymer tipped bullets and one that is designed specifically for VLD bullets... Less
More

Holland's Primer Pocket...

$17.49
MidwayUSA Holland's Primer Pocket Cleaner
+ $4.99 shipping
/hollands-primer-pocket/fzWxHZLE8O8Bv8I0QKAs9Q==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Holland's Primer Pocket Cleaner handles both large and small primer pockets in one simple to use tool. It is fast, easy to use and essential for proper primer seating to ensure the most accuracy from reloading. Technical Information Function: To clean Large and Small, Rifle or Pistol, primer pockets Material: Knurled Steel Notes: One end is for large primer pockets and the other end is for small primer pockets Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation, Primer Pocket & Flashhole Tools
More

K&M Large Primer Pocket...

$22.99
MidwayUSA K&M Large Primer Pocket Correction Tool
+ $4.99 shipping
/km-large-primer-pocket/mw-4KlJ95h01OJ72JZ__qw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The K&M Primer Pocket Correction Tool will uniform primer pockets to a uniform depth. Uniform primer pockets will increase consistency and accuracy in reloads. This tool is made of steel with a carbide cutter. This can be used under power with a cordless screwdriver or with the K&M handle #698914 (sold separately). Large Rifle tool will cut primer pockets to a depth of .131. Large Pistol and the Small Rifle/Pistol tool will cut primer pockets to a depth of .122. Note: The intention of this tool is to uniform the primer pocket. It will not remove military primer crimps. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation, Primer Pocket & Flashhole Tools
More

Hornady Lock-N-Load Bullet...

$27.49
MidwayUSA Hornady Lock-N-Load Bullet Tube 45 ACP
+ $8.39 shipping
/hornady-locknload/CkdI6Hmnyvowg-LkmGcDlA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Features Feeds bullets into existing Hornady bullet feeder diesEliminates the need for a bullet feeder hopperMilled window in tube shows when it is almost emptySuitable for any progressive press with 7/8-14 thread die stationsFits 45 ACP Turn any progressive press into an “ammunition factory” with the easy to use Hornady Lock-N-Load Bullet Tubes. Coupled with a Hornady Bullet Feeder die (sold separately), Lock-N-Load Bullet Tubes provide hand loaders a fast, flexible system that increases loading speed on any compatible progressive reloading press with 7/8-14 thread die-stations. With the Lock-N-Load Bullet Tubes, the hand loader can simply pre-load the tubes with bullets and place the tube in the top of their bullet feeder die. Tubes can fit 40+ bullets depending on caliber and weight... Less
More

PTG Bullet Comparator 17, 20,...

$26.99
MidwayUSA PTG Bullet Comparator 17, 20, 22, 27, 30, 33 Calibers
+ $4.99 shipping
/ptg-bullet-comparator-17/dYmpWYY2W8QWCXKHHKgFkQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The PTG Bullet Comparator is designed to take measurements from the major diameter of a bullet to the case head rather than from the bullets tip to the case head. There are six holes that will work with each caliber listed in the description. Technical Information Fits: 17, 20, 22, 27, 30, 33 caliber bullets Function: Allows reloader to take a comparative measurement from the major diameter of a bullet to the case head Material: Steel Notes: Insert a cartridge into its correct size hole, then measure from the opposite face of the tool to the base of the cartridge. This dimension may be used to adjust seating dies so that the bullets are being seated more uniformly with respect to the bullet's ogive rather than a cartridge's overall length Searches for products like these typically... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die Caliber Sleeve 30 Caliber (308 Diameter)
+ $4.99 shipping
/whidden-gunworks-bullet/nU8TF6M9YeFTQCi3jChdsQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die System Insert #2
+ $4.99 shipping
/whidden-gunworks-bullet/oQQA_uRM4ysPRuSUbV23FA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Lyman Magnum Impact Bullet...

$20.99
MidwayUSA Lyman Magnum Impact Bullet Puller
+ $4.99 shipping
/lyman-magnum-impact/tmitxYpTcNkRPS-0JueqRQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lyman Magnum Impact Bullet Puller is designed to safely disassemble a loaded round in seconds with out damage to the bullet or brass case. Just smack the head on a hard surface until the bullet comes apart from the brass. The head design has been newly engineered to allow the puller to be used on a full range of calibers from the small 5.7x28mm FN to the largest magnum case. The full size ergonomic molded handle with rubber insert will provide a comfortable secure grip so the tool wont slip while being used. Technical Information Type: Inertia Impact Bullet Puller Function: Separate bullet and powder from a loaded round Material: Aluminum shaft, Shatter proof plastic head Notes: Works great with cast bullets Works on small calibers like the 5.7x28mm FN to the largest magnum case... Less
More

Hornady Lock-N-Load Bullet...

$27.49
MidwayUSA Hornady Lock-N-Load Bullet Tube 9mm Luger
+ $7.59 shipping
/hornady-locknload/-R395F8U1RI94ytTsdAHlQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Features Feeds bullets into existing Hornady bullet feeder diesEliminates the need for a bullet feeder hopperMilled window in tube shows when it is almost emptySuitable for any progressive press with 7/8-14 thread die stationsFits 45 ACP Turn any progressive press into an “ammunition factory” with the easy to use Hornady Lock-N-Load Bullet Tubes. Coupled with a Hornady Bullet Feeder die (sold separately), Lock-N-Load Bullet Tubes provide hand loaders a fast, flexible system that increases loading speed on any compatible progressive reloading press with 7/8-14 thread die-stations. With the Lock-N-Load Bullet Tubes, the hand loader can simply pre-load the tubes with bullets and place the tube in the top of their bullet feeder die. Tubes can fit 40+ bullets depending on caliber and weight... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die Caliber Sleeve 243 Caliber, 6mm (243 Diameter)
+ $4.99 shipping
/whidden-gunworks-bullet/2GY0NeUtD9Iy0uKwVcpwmQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

MCR Bullet Meplat Uniforming...

$99.99
MidwayUSA MCR Bullet Meplat Uniforming Tool 243 Caliber, 6mm
+ $4.99 shipping
/mcr-bullet-meplat/4vXUwxy7bpmPQA5Oa6n5Mg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
This tool allows the reloader to remove the unevenness in the nose of the bullet. This results in consistent projectiles, tighter groups and increased long range consistency. One-piece, stainless steel tool works for any weight bullet in the assigned calibers to create a burr free hollow point with no damage done to the bullet. Used by some of the top shooters in the world for 1,000 yard bench-rest, high power and long range hunting. Technical Information Notes: consists of a caliber-specific tool body, a cutter and a hollow-point deburring tool Information from the manufacturer: Montour County Rifles Meplat Uniforming Tool allows the re-loader to equalize the ballistic coefficient (B.C.) of any kind weight bullet. This is done by removing the uneveness of a bullets meplat. (the nose of... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die Caliber Sleeve 284 Caliber, 7mm (284 Diameter)
+ $4.99 shipping
/whidden-gunworks-bullet/IJc36CAb0iDhb0e7HHaJxw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die System Insert #0
+ $4.99 shipping
/whidden-gunworks-bullet/UmqsP_W5raepU1B6_iK1JQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die System Insert #1
+ $4.99 shipping
/whidden-gunworks-bullet/_ilpQUG_RRCLEIy9OaIbMg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Hornady Custom Grade New...

$24.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 35 Remington
+ $4.99 shipping
/hornady-custom-grade-new/Ezj9cz44Js0h8vdjA6hmcg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

Hornady Custom Grade New...

$24.99
MidwayUSA Hornady Custom Grade New Dimension Bullet Seater Die 17 Remington
+ $4.99 shipping
/hornady-custom-grade-new/Fsi0m393r1C5AiQeKY1p3w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Seater Die is a great die for the avid reloader. The CGND Seater Die will improve your bullet seating and accuracy with its floating bullet alignment sleeve and stem. The floating sleeve is designed to align the bullet and case prior to seating, preventing any deformations on the base of the bullet. The Seater Die features a roll crimp. For the ultimate accuracy and precision, you can add the Hornady Microjust Seating Stem (sold separately #394708) to create your own Micrometer Seating Die! The CGND Seater Die is also compatible with popular bullets like the A-Max and FTX bullet lines with the addition of the appropriate Hornady Die Seater Stem (sold separately). Shellholder sold separately. Technical InformationMateri al: Steel Die Type: Seating Die... Less
More

RCBS Pistol Bullet Feeder Die...

$26.29
MidwayUSA RCBS Pistol Bullet Feeder Die Kit (380 ACP, 9mm Luger, 38 Special, 357 Magnum) 90 to 158 Grain Bullets
+ $7.59 shipping
/rcbs-pistol-bullet-feeder/HKNKbfbx_5Wbhb12MdNamQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS is known for making high-quality reloading equipment. The pistol bullet feeder is no exception. Each kit comes with a caliber specific die and two bullet feeding tube. These dies are standard 7/8-14 threaded dies and will fit any standard reloading press; these dies are designed to speed up the reloading process on a turret or progressive reloading press. Each clear pistol bullet feeder tube holds between 20-25 bullets depending on the bullet weight and profile. The pistol bullet feeder places the bullet into the case of the mouth with the proper alignment so the bullet can be seated at the next station. One of the great aspects of the tube pistol bullet feeder is that it is versatile. The feeder will work with any type of bullet including: jacketed, plated, solid copper and cast or... Less
More

Hornady Lock-N-Load Pistol...

$24.49
MidwayUSA Hornady Lock-N-Load Pistol Bullet Feeder Bullet Feeding Die (45 ACP)
+ $4.99 shipping
/hornady-locknload/Lvl64RAIhmQNrHIImp6LUw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Lock-N-Load Progressive Press Bullet Feeder Dies are specifically designed to work with the Hornady Lock-N-Load Progressive Press Bullet Feeder. The Lock-N-Load Bullet Feeder is designed to work with any progressive press with standard 7/8-14 die threads and has been found to increase reloading speed up to 50%. These feeder dies are case activated, meaning a bullet will only be fed upon contact with the case. The collets are constructed of solid steel and are durable enough for years of reloading. Technical Information Dies Included: Lock-N-Load Bullet Feeding Die Die Size: 7/8-14 threads Notes: Works with standard progressive press when using the Hornady Lock-N-Load Bullet Feeder Hornady Lock-N-Load bushing shown on the die in the picture is not included Searches for products... Less
More

Holland's Primer Pocket...

$44.99
MidwayUSA Holland's Primer Pocket Uniformer
+ $4.99 shipping
/hollands-primer-pocket/51uIYPD_tDUZx1YZeoS0nQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Holland's Primer Pocket Uniformer tool is designed to ensure that primer pockets are cut to the correct SAAMI depth specifications, cleaning out built up carbon residue from previous firings and squaring the bottom of the primer pocket with respect to the case head. This step is important as variations in the seating depth of the primer can change how the firing pin strikes the primer producing inconsistent ignition. This tool features a reversible cutting head for use on small and large primer pockets. Technical Information Function: To ensure primer pockets are at a uniform depth Material: Steel head, plastic handle Notes: To use, insert and turn tool to cut primer pocket base. Steel cutting head is held into the handle with a set screw Cutting head is reversible for both large and... Less
More

RCBS Auto Primer Feeder Combo

$25.79
MidwayUSA RCBS Auto Primer Feeder Combo
+ $4.99 shipping
/rcbs-auto-primer-feeder/25rTU3kcj1EFFadbThZxaw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Auto Primer Feeder helps to speed up the reloading process while at the same time curbing misfires and helping to prevent primer contamination from oily fingers. Technical Information Primer Capacity: 100 Accessories: Large and Small primer tube. Notes: Drops primers one at a time into the Primer Plug and sleeve. Nylon primer pick-up keeps primers from falling out. For use with Rock Chucker II, JR and Reloader Special Presses. Does not work with Rock Chucker Supreme or Partner Presses. For more information on RCBS Priming Tools and Accessories, please click the link below: Searches for products like these typically include: Reloading Supplies,Priming Tools,Priming Tool Accessories
More

K&M Small /Pistol Primer...

$22.99
MidwayUSA K&M Small /Pistol Primer Correction Tool
+ $4.99 shipping
/km-small-pistol-primer/QYYvfDmjCreR4tnp3R0_TA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The K&M Primer Pocket Correction Tool will uniform primer pockets to a uniform depth. Uniform primer pockets will increase consistency and accuracy in reloads. This tool is made of steel with a carbide cutter. This can be used under power with a cordless screwdriver or with the K&M handle #698914 (sold separately). Large Rifle tool will cut primer pockets to a depth of .131. Large Pistol and the Small Rifle/Pistol tool will cut primer pockets to a depth of .122. Note: The intention of this tool is to uniform the primer pocket. It will not remove military primer crimps. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation, Primer Pocket & Flashhole Tools
More

RCBS Auto Primer Feeder Tube...

$10.99
MidwayUSA RCBS Auto Primer Feeder Tube Small
+ $4.99 shipping
/rcbs-auto-primer-feeder/TE2NplWmjKpKQ_yHJfnFHg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Auto Primer Feeder helps to speed up the reloading process while at the same time curbing misfires and helping to prevent primer contamination from oily fingers. Technical Information Fits: RCBS Auto Primer Feed Function: Primer pick-up tube Material: Aluminum Notes: Holds 100 small primers Searches for products like these typically include: Reloading Supplies,Priming Tools,Priming Tool Accessories
More

K&M Large Pistol Primer...

$22.99
MidwayUSA K&M Large Pistol Primer Pocket Correction Tool
+ $4.99 shipping
/km-large-pistol-primer/U3YSkqGO7MiYcaBF01OTYg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The K&M Primer Pocket Correction Tool will uniform primer pockets to a uniform depth. Uniform primer pockets will increase consistency and accuracy in reloads. This tool is made of steel with a carbide cutter. This can be used under power with a cordless screwdriver or with the K&M handle #698914 (sold separately). Large Rifle tool will cut primer pockets to a depth of .131. Large Pistol and the Small Rifle/Pistol tool will cut primer pockets to a depth of .122. Note: The intention of this tool is to uniform the primer pocket. It will not remove military primer crimps. Searches for products like these typically include: Reloading Supplies,Case Cleaning & Preparation, Primer Pocket & Flashhole Tools
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2017 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443
http://img.shoppingshadow.com/jfe/JavaFrontEnd-r.2016.featured.deals.removed-30443