Category

Sport and Outdoor
Showing results for "bullet mold 224"
Results 1 - 40 of 1500+

Hornady Match Bullets 22...

$80.99
MidwayUSA Hornady Match Bullets 22 Caliber (224 Diameter) 68 Grain Hollow Point Boat Tail Box of 500 (Bulk Packaged)
+ $9.59 shipping
/hornady-match-bullets-22/8QBzZIVKuWyfANBTDRM0uw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady has taken their match bullet engineering to the next level. All of their match bullets now feature their AMP (Advanced Manufacturing Process) bullet Jackets. What are AMP bullet jackets? AMP jackets are a technological advancement in design, tooling and manufacturing that when all put together produce the most consistently concentric bullet jackets available. These new jackets have virtually zero tolerance for concentricity and near zero wall thickness variation. When you combine this technology with a precision swaged lead core and the tightest standards in the industry you get a match bullet that will flat out shoot! This is not loaded ammunition. Every match bullet features: AMP Bullet Jackets Secant Ogive Profile delivering low drag and flat trajectories Swaged lead core... Less
More

Barnes Triple-Shock X Bullets...

$27.49
MidwayUSA Barnes Triple-Shock X Bullets 22 Caliber (224 Diameter) 45 Grain Hollow Point Flat Base Lead-Free Box of 50
+ $3.99 shipping
/barnes-tripleshock-x/EGflrgPwaS7aKrRwXahKqA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
These revolutionary bullets from Barnes are made of 100% copper and contain no lead. When the bullet expands, four razor-sharp cutting petals are created, allowing the bullet to penetrate farther through tough bone and tissue. These bullets usually retain 100% of their original weight, making them a superb choice for hunting. Barnes recommends initially seating bullets 0.050 off the lands. Best accuracy will be found from 0.030 to 0.070 depending on the rifle. This is not loaded ammunition. Technical Information Caliber: 22 Bullet Diameter: 0.224 Bullet Weight: 45 Grains Bullet Length: 0.698 Bullet Style: Hollow Point Flat Base Lead-Free Bullet Coating: Non-Coated Ballistics Information: Sectional Density: 0.128 Ballistic Coefficient: 0.188 ATTENTION RESIDENTS OF CALIFORNIA: These bullets... Less
More

Lee Bullet Lube and Size Kit...

$20.99
MidwayUSA Lee Bullet Lube and Size Kit 224 Diameter
+ $10.19 shipping
/lee-bullet-lube-and-size/HdSF6hugnj8A-w-Ia2KOnA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Lee Lube and Size Kit is one of the fastest and easiest ways to lubricate and size cast bullets. The sizing die that comes with the kit fits in any press that accepts standard 7/8-14 threaded dies. Bullets are pushed through the sizing die nose first, so no special top punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container and a 4 oz bottle of Lee Liquid Alox bullet lube is included. Technical Information: Material: Steel Sizing Die, Plastic Hopper Function: Size cast bullets Notes: Comes in red plastic case Lee recommends bullets be relubed after sizing to be sure the sized portion is coated with Alox. All lead bullets must be lubricated, but it is not absolutely necessary to size all cast bullets. Bullets... Less
More

Hornady Bullets 22 Caliber...

$10.99
MidwayUSA Hornady Bullets 22 Caliber (224 Diameter) 55 Grain Full Metal Jacket Boat Tail Box of 100 (Bulk Packaged)
+ $3.99 shipping
/hornady-bullets-22/QNNnDK6NuFlrVfPJYkmqag==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Full Metal Jacket Bullets are designed so that the bullet is completely encased in a hard metal jacket (except for the base), which is not intended to expand upon impact. The Boat Tail design is to provide a flatter trajectory and long range performance by raising the ballistic coefficient. These bullets are primarily used for target shooting and plinking. Also ideal for varmint hunting, this bullet will deliver deep penetration and bone shattering results while also protecting the integrity of the pelt at the same time. This is not loaded ammunition. Technical Information: Sectional Density: 0.157 Ballistic Coefficient: 0.243
More

Lyman Bullet Molds

$72.99
Cabela's Lyman Bullet Molds
+ $10.95 shipping
/lyman-bullet-molds/DQ71iRVKnR-5GtML_coTmw==/info
Cabela's
IN_STOCK ( In stock )
Lyman Bullet Molds are individually machined from high-grade steel and hand fit for precision alignment. The .45 and .50 calibers are single cavity molds, all other calibers are double-cavity molds. Handles are available. Type: Bullet Molds & Casting. Lyman Bullet Number: 457122. Caliber/Gauge: .45/.458. Cal/Gaug 45-70 330 Gr 457122. Sports and Outdoors > Sport and Outdoor
More

Whidden Gunworks Bullet...

$42.00
MidwayUSA Whidden Gunworks Bullet Pointing Die Caliber Sleeve 22 Caliber (224 Diameter)
+ $3.99 shipping
/whidden-gunworks-bullet/q3skHm_IKde1Vaxn39CnEA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Whidden Gunworks Bullet Pointing Die System is the perfect tool to point the tip of rifle bullets for long range competition. Developed by John Whidden, accomplished long range marksmen, to not only increase a bullets ballistic coefficient (making them more aerodynamic) but also increasing the consistency of reloaded ammunition. In fact many of the best long range shooters point their competition bullets to increase consistency of loaded ammunition to help produce the most consistent handloads available. Pointing bullets is simple, all a reloader has to do is run the bullet into the die and it is tipped, only adding a few moments to any reloading sequence. The Whidden Bullet Pointing Die System no longer uses a spring. The spring has been replaced by an internal sleeve which is... Less
More

Hornady Match Bullets 22...

$16.99
MidwayUSA Hornady Match Bullets 22 Caliber (224 Diameter) 68 Grain Hollow Point Boat Tail Box of 100
+ $7.19 shipping
/hornady-match-bullets-22/EFmNjkqWSbLp4RneQ7xoNw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady has taken their match bullet engineering to the next level. All of their match bullets now feature their AMP (Advanced Manufacturing Process) bullet Jackets. What are AMP bullet jackets? AMP jackets are a technological advancement in design, tooling and manufacturing that when all put together produce the most consistently concentric bullet jackets available. These new jackets have virtually zero tolerance for concentricity and near zero wall thickness variation. When you combine this technology with a precision swaged lead core and the tightest standards in the industry you get a match bullet that will flat out shoot! This is not loaded ammunition. Every match bullet features: AMP Bullet Jackets Secant Ogive Profile delivering low drag and flat trajectories Swaged lead core... Less
More

Hornady Match Bullets 22...

$16.99
MidwayUSA Hornady Match Bullets 22 Caliber (224 Diameter) 68 Grain Hollow Point Boat Tail
No Shipping Info
/hornady-match-bullets-22/kkDPQvSIJ0ohyuXUoUg5jg==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady has taken their match bullet engineering to the next level. All of their match bullets now feature their AMP (Advanced Manufacturing Process) bullet Jackets. What are AMP bullet jackets? AMP jackets are a technological advancement in design, tooling and manufacturing that when all put together produce the most consistently concentric bullet jackets available. These new jackets have virtually zero tolerance for concentricity and near zero wall thickness variation. When you combine this technology with a precision swaged lead core and the tightest standards in the industry you get a match bullet that will flat out shoot! This is not loaded ammunition. Every match bullet features: AMP Bullet Jackets Secant Ogive Profile delivering low drag and flat trajectories Swaged lead core... Less
More

Lyman Bullet Molds

$72.99
Cabela's Lyman Bullet Molds
+ $10.95 shipping
/lyman-bullet-molds/JjSxrTp23bg_e9eBQA3omw==/info
Cabela's
IN_STOCK ( In stock )
Lyman Bullet Molds are individually machined from high-grade steel and hand fit for precision alignment. The .45 and .50 calibers are single cavity molds, all other calibers are double-cavity molds. Handles are available. Type: Bullet Molds & Casting. Lyman Bullet Number: 311041. Caliber/Gauge: .30/.309. Cal/Gaug .30 173 Gr 311041. Sports and Outdoors > Sport and Outdoor
More

Hornady Bullets 22 Caliber...

$13.49
MidwayUSA Hornady Bullets 22 Caliber (224 Diameter) 60 Grain Spire Point Box of 100
+ $7.19 shipping
/hornady-bullets-22/ApsGrrVR_fnkxcgWT9tWbQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Hornady Spire Point Bullets are designed for rapid expansion and maximum impact and offer a wide variety of uses from hunting to target shooting. This is not loaded ammunition. Ballistics Information Sectional Density: 0.171 Ballistic Coefficient:0.264
More

Hornady Cam-lock Bullet...

$25.11
eBay Hornady Cam-lock Bullet Puller Collet 2 22 Caliber 224 Diameter Cam Lock 392155
Free Shipping
/hornady-camlock-bullet/eOitw-eO6x3Wo0X24RDpAg==/info
eBay
IN_STOCK ( In stock )
Free Shipping
Product Information The Hornady Cam-Lock Bullet Puller is one of the fastest and easiest ways to pull bullets with a reloading press. Collets are the part of the system that clamp to the bullet so it can be removed quickly and easily.Technical Information Fits: Hornady Cam-Lock Bullet Puller (Item 851-547) Function: Diameter Specific Collet (size located in description) Want to pay with a Credit or Debit Card ? No problem! Give us a call at 910-284-1155 and we will be happy to take your card ov
More

Lyman Bullet Molds

$72.99
Cabela's Lyman Bullet Molds
+ $10.95 shipping
/lyman-bullet-molds/6kC5I8C9A1CI21zjIRLetQ==/info
Cabela's
IN_STOCK ( In stock )
Lyman Bullet Molds are individually machined from high-grade steel and hand fit for precision alignment. The .45 and .50 calibers are single cavity molds, all other calibers are double-cavity molds. Handles are available. Type: Bullet Molds & Casting. Lyman Bullet Number: 358665. Caliber/Gauge: .38/.357. Cal/Gaug .38 158 Gr 358665. Sports and Outdoors > Sport and Outdoor
More

RCBS Collet Bullet Puller...

$10.79
MidwayUSA RCBS Collet Bullet Puller Collet 22 Caliber (224 Diameter)
+ $3.99 shipping
/rcbs-collet-bullet-puller/EWwaAszmCktDyd8VJtxnmA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The RCBS Collet Bullet Puller is an excellent tool designed to help reloaders dismantle loaded ammunition to save valuable components. These collets are designed to easily pull out jacketed bullets without damaging them. These collets will only work with the standard RCBS Collet Bullet Puller. They are not compatible with the larger collet bullet puller designed to work in presses with 1-14 threads. Technical Information Fits: RCBS 7/8-14 thread Collet Bullet Puller Function: Collet grips the bullet as the press ram is lowered removing the bullet from the case Notes: Designed to pull jacketed bullets only
More

Forster Collet Bullet Puller...

$11.29
MidwayUSA Forster Collet Bullet Puller Collet 22 Caliber (224 Diameter)
+ $3.99 shipping
/forster-collet-bullet/aYobh9DM825_0drSmFRjEQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Forster Collet Style Bullet Puller is carefully constructed out of solid steel that provides the precision to carefully pull bullets from brass cases. Once the collet is inserted into the bullet puller the reloader turns the handle on the puller that tightens the collet against the bullet. The reloader lifts the ram down and the bullet is in the collet. Release the pressure from the collet and the bullet will drop free. Not designed to use on lead bullets. Technical Information Fits: Forster Collet Bullet Puller Function: Collet that clamps down on bullet to remove it from the brass case Material: Steel Notes: Collet only, Bullet puller sold separately (Item 419-303), Bullet Diameter the collet is designed to pull is located in the description
More

Lyman Bullet Molds

$72.99
Cabela's Lyman Bullet Molds
+ $10.95 shipping
/lyman-bullet-molds/CbP_gHt6l1Ej9E7bXNhFgg==/info
Cabela's
IN_STOCK ( In stock )
Lyman Bullet Molds are individually machined from high-grade steel and hand fit for precision alignment. The .45 and .50 calibers are single cavity molds, all other calibers are double-cavity molds. Handles are available. Type: Bullet Molds & Casting. Lyman Bullet Number: 452424. Caliber/Gauge: .45 Colt/.452. Cal/Gaug .45lc 255 Gr 452424. Sports and Outdoors > Sport and Outdoor
More

RCBS 1-Cavity Bullet Mold...

$124.99
MidwayUSA RCBS 1-Cavity Bullet Mold 678-R (678 Diameter) Round Ball
+ $6.59 shipping
/rcbs-1cavity-bullet-mold/y3YtMj7Yaht9eHQ1f6HQzA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS 1-Cavity Bullet Molds are machined from solid cast iron blocks to exacting specifications to ensure accurate, clean, repeatable castings cast after cast. The blocks are precision ground square prior to machining and steel alignment pins are used to ensure perfect mating of mold blocks even after years of heavy use. All RCBS mold blocks feature a 3/16 thick sold steel sprue plate held tightly in place with tempered steel spring washers and screws. Mold handles not included and must be purchased separately. Technical Information: Material: Machined solid cast iron mold blocks Cavities: 1-Cavity Features: Steel Sprue Plate Notes: Hardwood Handles are not included and must be purchased separately. For 1 or 2-Cavity molds please order MidwayUSA product # 566-980. Weight given are RCBS's... Less
More

RCBS 2-Cavity Bullet Mold...

$124.99
MidwayUSA RCBS 2-Cavity Bullet Mold 330-R (330 Diameter) Round Ball
+ $7.19 shipping
/rcbs-2cavity-bullet-mold/tyAkBZ9V8fN4qXSfSJtGAw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
RCBS 2-Cavity Bullet Molds are machined from solid cast iron blocks to exacting specifications to ensure accurate, clean, repeatable castings cast after cast. The blocks are precision ground square prior to machining and steel alignment pins are used to ensure perfect mating of mold blocks even after years of heavy use. All RCBS mold blocks feature a 3/16 thick sold steel sprue plate held tightly in place with tempered steel spring washers and screws. Mold handles not included and must be purchased separately. Technical Information: Material: Machined solid cast iron mold blocks Cavities: 2-Cavity Features: Steel Sprue Plate Notes: Hardwood Handles are not included and must be purchased separately. For 1 or 2-Cavity molds please order MidwayUSA product # 566-980. Weight given are RCBS's... Less
More

Lyman Bullet Molds

$72.99
Cabela's Lyman Bullet Molds
+ $10.95 shipping
/lyman-bullet-molds/Drjbvu07prEyVVad3Nj7ow==/info
Cabela's
IN_STOCK ( In stock )
Lyman Bullet Molds are individually machined from high-grade steel and hand fit for precision alignment. The .45 and .50 calibers are single cavity molds, all other calibers are double-cavity molds. Handles are available. Type: Bullet Molds & Casting. Lyman Bullet Number: 452664. Caliber/Gauge: .45/.452. Cal/Gaug .45 250 Gr 452664. Sports and Outdoors > Sport and Outdoor
More

Orange 224 Pivot Bicycle...

$13.32
VXB Bearings Orange 224 Pivot Bicycle Ceramic Ball Bearing set
+ $4.99 shipping
/orange-224-pivot-bicycle/MxcsHVYAp9kf2KvttQcRjw==/info
VXB Bearings
IN_STOCK ( In stock )
Store not rated
* Type: Hybrid Ceramic Deep Groove ball Bearings (steel rings with ceramic balls) * Fits Orange 224 Pivot Bicycle * Closures: Rubber Sealed * Closure Side: Double Sided Seals * Lubrication: Low Friction Grease * Material: Corrosion Resistant Chrome Steel * Balls: Low Friction Solid Ultra Light Ceramic Balls * Brand: VXB * Quantity: Set of two Bearings
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #373 375 Caliber (376 Diameter) 265 Grain Flat Nose Gas Check
+ $7.19 shipping
/saeco-2cavity-bullet/1Coki_fqO0KwZy-ubxMZ5w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco Bullet Mold Handles for...

$41.99
MidwayUSA Saeco Bullet Mold Handles for all Saeco Bullet Molds
+ $7.19 shipping
/saeco-bullet-mold-handles/P130hMLIGFe6attrZ962Tw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco Bullet molds are machined from specially developed cast iron blocks to exacting specifications for unmatched precision and accuracy. These handles are made to the same exacting specifications and quality standards of all Saeco products to provide years of service. These handles are required when using any Saeco bullet mold 1 to 8 cavity. Technical Information: Material: ductile iron casting with solid hardwood grips Function: Mold Handles for Saeco bullet molds Notes: One size fits all Saeco bullet molds
More

Hornady Custom Grade New...

$12.79
MidwayUSA Hornady Custom Grade New Dimension Die Seater Stem 224 Caliber A-Max Bullet
+ $3.99 shipping
/hornady-custom-grade-new/yJ57Y50gdVhfBSlbY1135A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
The Hornady Custom Grade New Dimension Die Seater Stem is the perfect addition for the reloader utilizing specialty Hornady bullets like the popular FTX bullet or the super accurate A-Max bullet. Simply remove the standard seating stem from your Custom Grade New Dimension Seating Die and install the new stem. The die stems will only work with Hornady Custom Grade New Dimension Seating Dies, and caliber listed in description. Technical Information Fits: Hornady Custom Grade New Dimension Seat Dies Material: Steel Notes: Replaces the seating stem in a Hornady New Dimension Seating die For use with the listed caliber and bullet type only Features Hornady's No-Risk Lifetime Warranty
More

Saeco 4-Cavity Bullet Mold...

$170.99
MidwayUSA Saeco 4-Cavity Bullet Mold #316 30 Caliber (309 Diameter) 150 Grain Flat Nose Gas Check
+ $7.19 shipping
/saeco-4cavity-bullet/-YbBQzRRuarYAt3lpLXyZA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 4-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Ashbury Bullet Goggles 2015

$114.95
evo Ashbury Bullet Goggles 2015
Free Shipping
/ashbury-bullet-goggles/US8hpKoYcRvd4mMsROv6cg==/info
evo
IN_STOCK ( In stock )
Free Shipping
Ashbury is back again with the Bullet Goggles to shade your eyes in style. Featuring a spherical lens and wide field of vision, the Bullets offer an impeccable visual experience, without the bulk of other wide vision goggles. Plus with a bonus yellow lens, you'll be set no matter if it's storming or bluebird. Get on the Ashbury bandwagon and check out the Bullet Goggles to discover the mountain in a better light.
More

Perspirade 224 gm (22 - 33...

$68.99
Valley Vet Supply Perspirade 224 gm (22 - 33 days)
Free Shipping
/perspirade-224-gm-22/VicDZ-Dr7c3gPwrYc31Qow==/info
Valley Vet Supply
IN_STOCK ( In stock )
Free Shipping
Perspirade is a unique herbal formula designed to support normal production of body fluids (sweat) that help cool the body and restore normal internal balance for horses with anhydrosis (non-sweaters). This proven herbal formula provides support for horses in high temperature, high humidity environments. Feed 1 gram per 100-150 lbs. body weight, divided into one am and one pm dose, daily with feed. Powder.
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #315 30-30 Winchester (309 Diameter) Tapered Style 175 Grain Truncated Cone Gas Check
+ $7.19 shipping
/saeco-2cavity-bullet/-aNx6qb30wSs1Ea1_Q7BMw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #384 9mm (356 Diameter) 122 Grain Round Nose
+ $7.19 shipping
/saeco-2cavity-bullet/5s9ypjxqf7wBesFmAeTv9w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #433 44 Special, 44 Remington Magnum (430 Diameter) 300 Grain Flat Nose Gas Check
+ $7.19 shipping
/saeco-2cavity-bullet/61cy__VuERq15G_NZZ4WGA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #630 30-30 Winchester (309 Diameter) 140 Grain Flat Nose
+ $7.19 shipping
/saeco-2cavity-bullet/EbUSvtFloMhCUMsyrlOw_A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #322 32-20 WCF (313 Diameter) 118 Grain Flat Nose
+ $7.19 shipping
/saeco-2cavity-bullet/K0v0cMeOUjeoJNMjFT3DyA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Lyman Bullet Mold Handles

$36.99
Cabela's Lyman Bullet Mold Handles
+ $8.95 shipping
/lyman-bullet-mold-handles/dxsjpW4Ed3OYzIwBNmw5Qg==/info
Cabela's
IN_STOCK ( In stock )
Mold Handles have a solid metal frame that is easily attached to mold blocks with slotted screws. Hardwood handles provide a cool, secure grip. They are designed to provide a consistent grip with different mold blocks. Handles are designed to fit large mold blocks. Mold blocks not included. Type: Bullet Molds & Casting. Type: Bullet Molds & Casting. Sports and Outdoors > Sport and Outdoor
More

Saeco 4-Cavity Bullet Mold...

$170.99
MidwayUSA Saeco 4-Cavity Bullet Mold #377 9mm (356 Diameter) 122 Grain Truncated Cone Bevel Base
+ $7.19 shipping
/saeco-4cavity-bullet/Ofw3fOd0pFaZ8BYE4zF-rA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 4-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 4-Cavity Bullet Mold...

$170.99
MidwayUSA Saeco 4-Cavity Bullet Mold #254 30 Caliber (309 Diameter) 115 Grain Round Nose Bevel Base
+ $7.19 shipping
/saeco-4cavity-bullet/Qh26mJ5KAvQjbJXc7dNAuw==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 4-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 3-Cavity Bullet Mold...

$164.99
MidwayUSA Saeco 3-Cavity Bullet Mold #410 41 Remington Magnum (411 Diameter) 220 Grain Flat Nose
+ $7.19 shipping
/saeco-3cavity-bullet/eBXbL6bpqbejgZnTWVCIpQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 3-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #352 35 Caliber (358 Diameter) 245 Grain Flat Nose Gas Check
+ $7.19 shipping
/saeco-2cavity-bullet/fdcG4TAaoGUmy8I4GEzE6w==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 4-Cavity Bullet Mold...

$170.99
MidwayUSA Saeco 4-Cavity Bullet Mold #351 38 Special, 357 Magnum (358 Diameter) 200 Grain Flat Nose
+ $7.19 shipping
/saeco-4cavity-bullet/iJbYMdBqpr-m3v0rZrx4UA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 4-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #302 30 Caliber (309 Diameter) 120 Grain Round Nose Gas Check
+ $7.19 shipping
/saeco-2cavity-bullet/jbTe42nmETm-r37GxlRwCA==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #351 38 Special, 357 Magnum (358 Diameter) 200 Grain Flat Nose
+ $7.19 shipping
/saeco-2cavity-bullet/pUNgcIGpQaFhaIHJPNSzYQ==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Orange 224 Pivot Bearing set...

$9.66
VXB Bearings Orange 224 Pivot Bearing set Quality Bicycle Ball Bearings
+ $4.99 shipping
/orange-224-pivot-bearing/mDe1EAvEoYoplkfGSvBipw==/info
VXB Bearings
IN_STOCK ( In stock )
Store not rated
* Type: Single row deep groove ball bearings * Fits Orange 224 Pivot * Closures: Rubber Sealed * Closure Side: Double Sided Seals * Lubrication: Low Friction Grease * Material: Corrosion Resistant Chrome Steel * Balls: High Chromium Steel 52100 SAE Steel * Balls Cage: Low Friction Steel * Precision: ABEC-1 Quality * Brand: VXB * Quantity: Set of two Bearings
More

Saeco 2-Cavity Bullet Mold...

$103.99
MidwayUSA Saeco 2-Cavity Bullet Mold #429 44 Special, 44 Remington Magnum (430 Diameter) 240 Grain Flat Nose
+ $7.19 shipping
/saeco-2cavity-bullet/sH1FsmEAtmLKUUGxzOnF6A==/info
MidwayUSA
IN_STOCK ( In stock )
Store not rated
Saeco precision 2-Cavity bullet molds are all machined from specially developed cast iron blocks one cavity at a time. Each cavity is cut with the same cherrie on digital equipment so it is guaranteed that each cavity duplicates the one cut before. The cast iron blend is a special mixture of copper alloyed pearlitic cast iron that produces a tight grain structure, dimensional stability and an extended life bullet mold. Combine this special alloy with a precision cut cherrie and these mold blocks will deliver great looking bullets cast after cast. The steel sprue plate is held firmly against mold blocks by a high-temperature spring washer to ensure uniform bullets with a square base. Mold handles are not included. Technical Information: Material: Special copper alloyed pearlitic cast iron... Less
More

Prices are provided by the merchants. We assume no responsibility for accuracy of price information provided by merchants. Please alert us to any pricing discrepancies and we will alert the merchant. Sales taxes are estimated at the zip code level. Shipping costs are estimates. Please check store for exact shipping costs. To learn more about why certain stores are listed on the site, click here

Product specifications are obtained from third parties, and while we make every effort to assure the accuracy of product information, we do not assume any liability for inaccuracies. Store ratings and product reviews are written and submitted by online shoppers to assist you as you shop. They do not reflect our opinions. We take no responsibility for the content of ratings and reviews submitted by users.

Copyright © 2000-2014 eBay Inc. All Rights Reserved

http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145
http://img.shoppingshadow.com/jfe/JavaFrontEnd-fe.apimig.eek-24145