oils and solvents

Xylene/Toluene Replacement Solvent, Solvent, Size 1 gal., VOC Content VOC Free, Application Removes Oil Based Paints, Application Method Brush, Roll, Spray

NMC OSHA signs are the perfect way to alert your employees and guests when a hazard is present in your facility. Keep your facility safe, buy an OSHA regulated sign today and prevent an accident tomorrow. These OSHA signs comply with OSHA 29 CFR 1910.145. 0.040 aluminum has baked enamel finish on both sides. This allows your sign to be printed on both sides. It is weather proof and non-corrosive, making it ideal for indoor and outdoor use. Signs are supplied with radius corners and pre-drilled corner mounting holes. Measures 14-inches length by 10-inches height. Indoor/outdoor use. Mounting: yes. Good chemical resistance. Maximum temperature: 150 degree F. Legend WARNING DO NOT DUMP CHEMICALS, SOLVENTS OR OILS DOWN DRAINS.

Product Information: Three-Gang: 2-Toggle, 1-Duplex Device Combination Wallplate, made of thermoset plastic. Resistant to fading, discoloration, grease, oils, organic solvents and moisture scratches. Includes metal mounting screws. Great quality for a great price, with the Leviton name you know you are getting a product that is built to last. Features:#149; Standard Three Gang 2-Toggle 1-Duplex Device Combination Wallplate#149; Simple Installation#149; High Quality Leviton Product#149; Includes Mounting Screws#149; Certifications: UL/CSA Specifications: #149; Type: Standard Size#149; Color: Almond#149; Gang: 3#149; Device Graphic: 2-Toggle 1-Duplex Device Combination#149; Material: Thermoset#149; Mount: Device#149; Certifications: UL/CSA

NMC OSHA signs are the perfect way to alert your employees and guests when a hazard is present in your facility. Keep your facility safe, buy an OSHA regulated sign today and prevent an accident tomorrow. These OSHA signs comply with OSHA 29 CFR 1910.145. 0.050 thick polystyrene material is ideal for long lasting indoor or outdoor use. Signs are supplied with radius corners and pre-drilled corner mounting holes. Measures 14-inches length by 10-inches height. Indoor/outdoor use. Mounting: yes. Good chemical resistance. Maximum temperature: 183 degree F. Legend WARNING DO NOT DUMP CHEMICALS, SOLVENTS OR OILS DOWN DRAINS.

Xylene/toluene Replacement Solvent, Solvent, Size 1 Gal., Voc Content Voc Free, Application Removes Oil Based Paints, Application Method Brush, Roll, Spray

Vibra-TITE 420 Instant Pipe Sealant is a slow curing sealant but provides an instant seal on tightened fittings. Initially the material seals against moderate pressure of up to 150 psi. This product is anaerobic with no solvents and no shrinkage which provides a vibration proof seal that is resistant to most chemicals and corrosion. Sealant develops a controlled low strength for easy disassembly. Vibra-TITE 420 Instant Pipe Sealant with Teflon lubricates parts during assembly. The cure system allows for realignment of parts up to 48 hours from application. This product can be used on most hydraulic, pneumatic, oil, water, and gas connections. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the tube or brushed directly onto... Less

Penetrating Solvent, Knocker Loose(R), Size 16 oz, Size/Net Weight 13 oz, Flash Point 126 F, VOC Content 363.7 g/L, Specific Gravity 0.84, Film Type Non-Drying Oil, Dielectric Strength 50,300, Carbon Dioxide Propellant, Low Viscosity, Non-Drying, VOC Compliant, Nuts and Bolts, Pins, Screws, Bushings, Clips, Hinges, Snaps, Lugs, Caps, Locks, Washers and Sliding Mechanisms., Petroleum Base, NSF H2 Registered

Vibra-TITE 420 Instant Pipe Sealant is a slow curing sealant but provides an instant seal on tightened fittings. Initially the material seals against moderate pressure of up to 150 psi. This product is anaerobic with no solvents and no shrinkage which provides a vibration proof seal that is resistant to most chemicals and corrosion. Sealant develops a controlled low strength for easy disassembly. Vibra-TITE 420 Instant Pipe Sealant with Teflon lubricates parts during assembly. The cure system allows for realignment of parts up to 48 hours from application. This product can be used on most hydraulic, pneumatic, oil, water, and gas connections. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the tube or brushed directly onto... Less

WARNING DO NOT DUMP CHEMICALS, SOLVENTS OR OILS DOWN DRAINS Sign - 7 x 10 Adhesive Dura-Vinyl. ADHESIVE DURA VINYL (XV). Dual-layered Adhesive Dura Vinyl delivers exceptional flexibility and performance. Durability, even in the toughest indoor and outdoor conditions. Material Features: High-gloss over-laminate film is bonded to printed image. Sub-surface legend protected from water, chemicals and abrasion. Flexible, 6-mil thick vinyl. Permanent acrylic adhesive backing. Service temperature range: -20F to 140F. Durability: 5-7 years outdoors. Square corners without holes; scored backing for quick peel-off and application. 5 year manufacturer guarantee. Safety Signs SIZE: 7 x 10,MATERIAL: Adhesive Dura-Vinyl

Product Information:Two-Ga ng Duplex Device Receptacle Wallplate, made of thermoset plastic. Resistant to fading, discoloration, grease, oils, organic solvents and moisture scratches. Includes metal mounting screws. Great quality for a great price, with the Leviton name you know you are getting a product that is built to last. Features:#149; Standard Two Gang Receptacle Wallplate#149; Simple Installation#149; High Quality Leviton Product#149; Includes Mounting Screws#149; Certifications: UL/CSA Specifications: #149; Type: Standard Size#149; Color: Brown#149; Gang: 2#149; Device Graphic: Receptacle#149; Material: Thermoset#149; Mount: Device#149; Certifications: UL/CSA

Bryant Duplex Styleline Combo Plate, 2-Gang, Standard, Almond Nylon Made of durable, high-impact nylon. Ideal for schools, hospitals, industrial and other applications where good looks, strength and durability are required. These high-impact nylon plates virtually eliminate breakage losses. Captive screw feature offers fast, easy installation. Self- extinguishing material resists oil, grease, solvents and cleaning agents. Non-conductive material. 2 gangs, standard size, almond, curved corners, smooth finish. 4.60 L. 4.60 W. 0.20 H.

9W x 3/8 nap 3 pack Medium surfaces High capacity yellow fabric for fast no skip coverage For all flat paints, stains, sealers (latex, acrylic, oil) Good density to resist matting for smooth results Polypropylene core resists water, solvents and cracking

Knock'er Loose(r)Solvent, Container Type Trigger Spray, Size 16 oz., Flash Point 126 Degrees F, VOC Content 369.9 g/L, Specific Gravity 0.84, Film Type Nondrying Oil, Dielectric Strength 50,300, None Propellant, Low Viscosity, Non-Drying, VOC Compliant, Nuts and Bolts, Pins, Screws, Bushings, Clips, Hinges, Snaps, Lugs, Caps, Locks, Washers and Sliding Mechanisms., Petroleum Base, NSF H2 Registered

Vibra-TITE 440 High Pressure Threadsealant is a fast curing high strength anaerobic sealant which seals hydraulic and pneumatic fittings up to 2 in diameter, resisting high pressures and vibrational loosening. This product has excellent solvent resistance and withstands temperatures to 300 degree F. Typical applications are hydraulic and pneumatic fittings, servomechanisms and fine filtration systems. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle directly onto threaded parts. Fixture Speed with Activator is Less

Excellent for heavy loads. Can be used on virtually any floor surface. Not affected by oil, grease and most industrial solvents. Non-marking and non-staining. Resists impact, shock and abrasion. Po...

Coin Top Interlocking PVC tiles are designed for extra heavy vehicle traffic such as fork lifts and warehouse industrial applications - excellent for garages as well. An economical solution for new surfaces, or to repair old, worn out surfaces. Coin Top Tiles offer a great look, safety and functionality. This PVC Interlocking tile comes in a coin top anti-slip and a smooth surface. Tile size of 19.5 x 19.5 inches per tile - coverage of 2.5 SF per tile. Applications: -Garage Floors -Warehouses & Industrial Areas -Entrance Ways -Industrial Workshops -Arenas Features: -100% Recycled PVC -Coin Top and Smooth Surface Available -No adhesive needed -Easy to clean: just damp mop -Damaged tile modules are easily replaced -Resistant to oil, gasoline, most solvents & caustics ... Less

Bryant Telephone Styleline Combo Plate, 2-Gang, Standard, White Nylon Made of durable, high-impact nylon. Ideal for schools, hospitals, industrial and other applications where good looks, strength and durability are required. These high-impact nylon plates virtually eliminate breakage losses. Captive screw feature offers fast, easy installation. Self- extinguishing material resists oil, grease, solvents and cleaning agents. Non-conductive material. 2 gangs, standard size, white, curved corners, smooth finish. 4.80 L. 4.60 W. 0.20 H.

Dixon graphite SEPTLS463LMF1 Extra fine graphite powder for use in numerous applications. Mix with oils, solvents and various greases or use in powder form.

Warning Sign, Do Not Dump Chemicals Solvents Or Oils Down Drains, Text, English, Fiberglass, Mounting Style Surface, Height 10 In., Width 14 In., Black/orange, Standards Ansi Z535 And Osha 1910.145

WARNING DO NOT DUMP CHEMICALS, SOLVENTS OR OILS DOWN DRAINS Sign - 7 x 10 Adhesive Vinyl. ADHESIVE VINYL (VS). Stick with Adhesive Vinyl for light-duty applications.The ideal choice for a variety of indoor, and sheltered outdoor, marking needs. Easily mounts to all curved areas such as pipes, poles and secondary containers. Material Features: 4-mil thick surface printed matte surface. Permanent acrylic adhesive. Moisture- resistant. Service temperature range: -20F to 140F. Durability: 2 years outdoors. Square corners and scored backing for quick peel-off and application. Safety Signs SIZE: 7 x 10,MATERIAL: Adhesive Vinyl

Along with good protection against bases, oils, many solvents, greases and animal fats, our nitrile gloves also offer excellent resistance to snags and punctures, abrasions and cuts for a thin polymer glove. Ideal applications: Chemical plants and transportation, chemical processing, oil refining and petrochemicals, cleaning and de-greasing, handling equipment and abrasive materials coated with oil, grease, acids and solvents, handling fillers, solvents, dye agents, cleaning solvents, cement and mortar mixing. 13 mil thickness. Medium size. Burgundy color.

The Guard Dog GD5X125-B/B polyurethane heavy duty 5 channel cable protector has open top channels covered by a lid with reinforced fiberglass hinges to protect cables, electrical cords, and hoses with an outside diameter of up to 1.33/34 mm from wear and compression caused by vehicular traffic (up to 21,000 lb./9,526 kg per axle) while helping to reduce the danger posed by loose cables in the path of pedestrians. The cable protector has two dog-bone shaped connectors on each side (two male connectors on one side and two female connectors on the other) for interlocking multiple connectors to extend coverage across wide passages. This cable protector is manufactured using a process called Reaction Injection Molding (RIM), which results in a consistency beneficial when connecting multiple... Less

Superior PVC glove, short for polyvinyl chloride, is a thermoplastic polymer of urethane that resists many chemicals, oils, greases, acids, caustics, solvents, oxidation and ozone. It also provides great abrasion resistance and tensile strength. The FB200 Series gloves are a black, double-dipped high-grade PVC. They are an economy version of our green Torpedo double-dipped PVC gloves. PVC coating over a two-piece, sanitized, fleeced jersey liner has a rough finish for excellent grip in wet or dry conditions. Agriculture Canada (CFIA) Approved for Food Handling. Note: PVC has poor resistance to hot water and is not recommended for use above 79 degree C (175 degree F). Applications include commercial fishing, car/automotive, maintenance, construction, petrochemical industry, fuel oil... Less

Acricoat WB is a solvent free water-based acrylic concrete sealer that can be used on interior or exterior concrete. Acricoat WB can be used on stamped, etched, dyed, colored and exposed aggregate concrete to enhance the color and protect the concrete. It protects decorative concrete from traffic wear, water, oil, grease and food stains. After application the clean-up is easy with soap and water. Non-yellowing UV stable formula deepens the color of the concrete and gives a semi gloss sheen. It minimizes spalling, checking, protects the color layer and eliminates dusting caused by improperly cured concrete. Low VOC, low odor and non-hazardous. 50 state legal. 150-200 sq.ft./gallon two coat application process (300-400 sq. ft. 1st coat; 400-600 sq.ft. 2nd coat.)