Selkirk

High temperature ULC-S629 listed and tested to withstand temperatures of 2100 degrees Fahrenheit With 2 in. thick premium fibre, solid-pack insulation for maximum safety and performance Secure twist-lock design couples chimney sections together with a 1/8 turn Sectional overlap of 1-1/8 in. 7 in. diameter

Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The solid pack density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the insulation andalso blocks radiation heat transfer. Tested to 2100 degrees F. UL listed.

Selkirk VP Pellet Pipe Chimney Adaptor is used to transition Pellet Pipe to existing chimney. Can be used in vertical and horizontal installations and features proven gasketed coupling joints that connect in seconds to assure joint integrity. Available in 3 and 4 diameters constructed of 304 stainless steel inner wall and paintable galvanized outer wall. Internal spacing bead assures uniform insulating air space between pipe walls, and allows for 3 clearance to combustible materials. Male end is rolled over eliminating sharp edges.VP Pellet Pipe is used for venting pellet or corn burning stoves approved for use with PL-Vent. The appliance's flue gases must not exceed 570° F (298.80° C).See all 4 VP Pellet Pipe Components

High temperature ULC-S629 listed and tested to withstand temperatures of 2100 degrees Fahrenheit With 2 in. thick premium fibre, solid-pack insulation for maximum safety and performance Secure twist-lock design couples chimney sections together with a 1/8turn Sectional overlap of 1-1/8 in. 6 in. diameter

mfr: SELKIRK METALBESTOS INSULATED CHIMNEY PIPE For gas, wood & liquid fuel-fired appliances Both inner & outer walls are stainless steel Solid packed Low-K insulation, no asbestos Internal twist-lock couplers Diameter: I.D. 6, O.D. 8 Requires 2 minimum air-space clearance Includes 1 locking band 6UT-6 6 IN. SSII CHIMNEY PIPE SIZE:6x 6

Sure-Temp, 6 x 9, 6T-9, All Fuel, Double Wall, Chimney Pipe. Comes equipped with locking band and solid pack insulation. Tested to withstand 2100 F and is UL listed. Test helps to prevent product damage, or structural hazard during brief periods of this excessive chimney temperature. Constructed with a stainless steel outer casing and inner liner. 2 inch minimal clearance to combustibles.

Selkirk Sure-Temp 206100 6 Chimney Pipe Tee W/Insulating T-Cap Auth Dealer We are an authorized reseller of this item.If you have any questions about any of our products, please contact us via eBay message . Description Selkirk Sure-Temp 6 Chimney Pipe Tee W/Insulating T-Cap Auth Dealer (BRAND NEW!)Model Number:206100 FEATURES: Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the Tee snout, using a Lo

Sure-temp 6 x 48, 6T-48, All Fuel, Double Wall, Chimney Pipe. Comes equipped with locking band and solid pack insulation. Tested to withstand 2100 F and is UL listed. Test helps to prevent product damage, or structural hazard during brief periods of this excessive chimney temperature. Constructed with a stainless steel outer casing and inner liner. 2 inch minimal clearance to combustibles.

Ideal for relining chimneys that have deteriorated lining, oversized lining, or for lining chimneys with no existing lining, Saf-T Liner System adds years to the life of a chimney. The product%27s resistance- welded, 24-gauge stainless steel fabrication meets code requirements and provides optimum safety. As a substitute for 5/8 fireclay liner, Saf-T Liner cannot be beat.Material Specifications: Saf-T Liner systems consist of a Stainless Steel Liner Section (fabricated using either 304L or 316L stainless steel) insulated with Saf-T Wrap chimney insulation. Misc:Temperature Rating: 1000-Supported Fuels: Saf-T Liner is suited for use with solid fuel and older oil- or gas-fired equipment that does not produce condensation in the vent.Warranty: Lifetime WarrantyUL Tested and Listed to UL 1777... Less

Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulating valve of brick. This optimum density of insulation stops expansion noises and resists and contains surges of heat. This allows the system to be enclosed with only 2 inch clearance to combustibles. The solid pack density comprises about 85 percent air. The mixture of extremely fine fibers trap this air in the pores of the ins

Selkirk Sure-Temp 206148 6Id X 48L Insulated Stainless Steel Chimney Pipe We are an authorized reseller of this item.If you have any questions about any of our products, please contact us via eBay message . Description Selkirk Sure-Temp 6Id X 48L Insulated Stainless Steel Chimney Pipe (BRAND NEW!)Model Number:206148 FEATURES: Type HT chimney pipe special augured in mineral wool insulation filling the space between stainless steel walls is only 1 inch thick, yet provides 17 times the insulat