9 Volt

LoudMouth Monitor, Audio Alarm Yes, Battery Backup Yes, On/Off Switch, Voltage 9, Width 3, Height 1, Depth 5.25, Requires 9 Volt Battery, Material Plastic, Alarm, For Use With HeatWeave, UnderFloor, WarmWire, SlabHeat, Monitors the Installation of Underfloor Heating Products and Sounds an Alarm if the Heating Elements Are Cut or Damaged., For Use In Underfloor Heating Installations

accessory- innovation One DC 9V 1A US Plug Universal external switching power supply adapter which can charge for Router,mobile hard disk,switch,CCTV CAMERA,HUB and other electrical devices with same output and Plug Dimension. Condition:100% brand new and high quality AC Input: 100 ~ 240V (AC) 50/60HZ DC Output: 9V DC at 1A Connector: 5.5 * 2.1mm Power supply polarity: Inside positive outside negative, inside x(+) outside i(-). Note:Pls make sure the output and tip size is correct AC/DC Home Wal

accessory- innovation One DC 9V 1A US Plug Universal external switching power supply adapter which can charge for Router,mobile hard disk,switch,CCTV CAMERA,HUB and other electrical devices with same output and Plug Dimension. Condition:100% brand new and high quality AC Input: 100 ~ 240V (AC) 50/60HZ DC Output: 9V DC at 1A Connector: 5.5 * 2.5mm Power supply polarity: Inside positive outside negative, inside x(+) outside i(-). Note:Pls make sure the output and tip size is correct AC/DC Home Wal

Volt Stream Multi-Battery Universal Battery Charger Recharge almost any AAA, AA, C, D or 9V size battery with the Volt Stream Multi-Battery Universal Battery Charger by Ideas in Motion.Save money on batteries everyday by recharging alkaline, Ni-Cad and Ni-Mh batteries you would normally throw away.Easy to read LCD display and color LED lights alert you when a battery is fully charged, or when the battery is exhausted. Top selector switch allows you to switch fom Alkaline, Ni-Cad and Ni-Mh batte

Untitled Document.r1 {color#900;} Charger Feature & Benefits Input110-120V AC 60Hz Recharges 1 to 4 pieces of AAA, AA, C and D Ni-MH/Ni-Cd batteries Standard charge for 1 or 2pcs 9V cells With battery type selector for Ni-Cd or Ni-MH AAA, AA, C and D batteries Recharges batteries in single or group Automatic charging current selection for different sizes of batteries Built-in IC timer control for overcharge protection LED lamp to indicate proper charging Fast charging in the specified period with automatic switch to trickle chargeCharging Time ??Batteries?? Charging Time??Ni-Cd D/C/AA/AAA??4 hours by timer control??Ni-MH D/C/AA/AAA??8 hours by timer control????Ni-Cd/N iMH 9V??10 hours by manualTenergy Rechargeable Batteries DimensionHeight 60 mm, Diameter 33 mm Weight:0.36lbs per... Less

While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key. Thus allowing the exit device to be set in an armed or disarmed mode. The horn is rated at 85 decibel. The key switch uses a standard 1-1/4 (32mm) mortise cylinder with a straight cam (Schlage Cam reference B502-191). The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. The ALK is available in two styles, 33A ALK, grooved cover and 35A ALK, smooth cover. The ALK includes ???EMERGENCY EXIT ONLY. ALARM WILL SOUND??? decal... Less

822 Digital EMF Meter:This meter doesn't require much introduction since it is the EMF meter that has been featured the most by TAPS on Sci-Fi Channel's GHOST HUNTERS. It's your bread and butter EMF meter that will give you the exact digital readout. A must-have for the scientifically- oriented EMF researcher. Measurement Range: 0.1 mGauss to 199.9 milliGauss. Single Axis Measurement.ELF Frequency Bandwidth Range: 30 to 300 Hz. Accuracy: ±4% at 50-60 Hz.High Contrast LCD Display. Certificate of Calibration included. Powered by: 9V alkaline battery (not included).The K2 EMF Meter is the deluxe model that features the constant on off switch that doesn't require a coin to keep the meter on. Reads EMFs from 1.5 to 20+ mg (milligauss). Please note: this product is intended to measure electric... Less

3 Alarm Kit Less RX with Internal Horn for 99 Series Exit Device  The ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key thus allowing the exit device to be set in an armed or disarmed mode. The key switch uses a standard 1-1/4 (32mm) mortise cylinder with a straight cam. The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. Over the years, Von Duprin has been an innovator in many new concepts to the... Less

Charger Specifications Recharges 1-4 pieces size AAA, AA, C D NiMHNiCd batteries Standard charge for 1 or 2pcs 9V cells. Battery type selector for NiCd or NiMH AAA, AA, C D batteries LED Indicators to indicate charging status Automatic switch to trickle charge after batteries are fully charged Recharges batteries in single or a group UL Approved Charge Time AAA 750 - 1000mAh - 4 to 6 hours AA 1600 - 2700mAh - 7 to 14 hours C 3000 - 5500mAh - 8 to 16 hours D 5000 - 10000mAh - 14 to 25.6 hours Battery Specifications Size C Capacity 2500 mAh Chemistry Nickel Metal Hydride NiMH Voltage 1.2V Brand Energizer E2 Included Qty 4 No memory effect Reliable service life Long-Lasting Performance Recharges up to 1000 Cycles Saves you hundreds of dollars compared to Alkaline batteries Can be replaced in... Less

Furnished with and controlled by a lock cylinder and key, the unit allows ten (10) seconds to exit through the door after arming the alarm, indicated by an intermittently flashing red LED light in the touchbar. A yellow LED in the touchbar will flash until manually reset by key to indicate an unauthorized exit even if the alarm has automatically reset. The unit is furnished with a 9 volt, industrial-grade battery concealed in the end cap assembly for easy replacement. A tamperproof switch will activate the alarm if unauthorized removal of the battery is attempted. Finish: Stainless Steel: 630 (Satin).

4 Alarm Kit with Internal Horn for 99 Series Exit DeviceThe ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key thus allowing the exit device to be set in an armed or disarmed mode. The key switch uses a standard 1-1/4 (32mm) mortise cylinder with a straight cam. The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal.Over the years, Von Duprin has been an innovator in many new concepts to the industry... Less

Deluxe Battery Eliminator Kit. Comes in do-it-yourself kit form. When assembled, this power supply is an ideal bench-top battery eliminator. Substitutes a wide variety of batteries, including AA, AAA, C,D and 9V types. The voltage is conviently selected by a rotary switch. Advanced, solid state electronics provide both LINE and LOAD regulation of the output voltage. The voltage selector switch is precison- designed so that the output voltage does not increase during adjustment between voltage ranges. (Kit, Assembly Required)

4 Alarm Kit with Internal Horn for 99 Series Exit DeviceThe ALK battery alarm kit is a simple yet effective way to deter unauthorized use of an opening. While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key thus allowing the exit device to be set in an armed or disarmed mode. The key switch uses a standard 1-1/4 (32mm) mortise cylinder with a straight cam. The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal.Over the years, Von Duprin has been an innovator in many new concepts to the industry... Less

While the exit device is still a means of egress, the ALK kit contains an internal horn. When the touch bar is depressed, the horn sounds to provide an audible means of signaling that the opening has been violated. The alarm kit can be armed or disarmed by key. Thus allowing the exit device to be set in an armed or disarmed mode. The horn is rated at 85 decibel. The key switch uses a standard 1-1/4 (32mm) mortise cylinder with a straight cam (Schlage Cam reference B502-191). The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. The 35A ALK, smooth cover. The ALK includes EMERGENCY EXIT ONLY. ALARM WILL SOUND decal for application on door. When the ALK is used, standard dogging is removed.

Switch Plate Thermometer, Sensor Type Thermistor, -40 Degrees to 230 Degrees Temp. Range (F), 40 Degrees to 110 Degrees C Temp. Range (C), Power Source 12V AC/DC, Mounting Switch Plate, Accuracy +/-1 Percent, Line Length 5 ft., Line Material Plastic Coated, Sensor Material Lexan, Sensor Dia. 7mm, Sensor Length 30mm, Case Material ABS, Lens Material ABS, Display 3 Digit LED, Standards UL, NSF Approved, Height 2-1/4 In., Width 4-1/8 In., Depth 4-3/4 In., Enclosure Rating IP65 Light Switch and Switch PlateInclude 9V battery backup wire assembly.UL Listed.Stainless steel single-gang plate Accuracy: 1%Switch Plate and Panel-Mount Digital ThermometersNSF Certified.3-digit LED

This totally wireless and easy to install PIR motion sensor with 120dB Alarm with strobe light and door chime is ideal for protection your home or office or store. It can be placed on a table or hung on the wall with the included adjustable mounting bracket. It will detect motion from up to 30 feet away by120 degree wide. If not disarmed by the owner-by using the remote control- it will respond with an ear piercing 120 dB alarm and the flashing light which will scare off the intruder and alert others to your need of help. This alarm - door chime is packaged with features. You may select either alarm or door chime mode by simply holding the remote button for 3 seconds. Entry and exit delays with LED indicators for alarm mode only. The alarm also allows you to set your own programmable... Less

Size C Capacity 2900 mAh Chemistry Nickel Metal Hydride NiMH Voltage 1.2V Brand Noma Manufactured by Rayovac Included Qty 16 No memory effect Reliable service life Long-Lasting Performance Recharges up to 1000 Cycles Saves you hundreds of dollars compared to Alkaline batteries Can be replaced in any product that uses C Batteries Have you finally decided to make the switch from alkaline batteries to rechargeable batteries If so, please read the following article to help you make an informative decision. The most common consumer use Rechargeable batteries are categorized by 2 different types; NiMH Battery Nickel Metal Hydride and NiCD Battery Nickel Cadmium. The working voltage on both of these types is 1.2V, whereas alkaline batteries have a voltage of 1.5v. There is no need to worry as... Less

Switch Plate Thermometer, Sensor Type Thermistor, -40 Degrees to 230 Degrees Temp. Range (F), 40 Degrees to 110 Degrees C Temp. Range (C), Power Source 110 VAC, Mounting Switch Plate, Accuracy +/-1 Percent, Line Length 5 ft., Line Material Plastic Coated, Sensor Material Lexan, Sensor Dia. 7mm, Sensor Length 30mm, Case Material ABS, Lens Material ABS, Display 3 Digit LED, Standards UL, NSF Approved, Height 2-1/4 In., Width 4-1/8 In., Depth 4-3/4 In., Enclosure Rating IP65 Light Switch and Switch PlateInclude 9V battery backup wire assembly.UL Listed.Stainless steel single-gang plate Accuracy: 1%Switch Plate and Panel-Mount Digital ThermometersNSF Certified.3-digit LED

The BH913 is a 9V battery holder (with cover). This holder features an on/off switch and incudes a 6 lead wire connection.